summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv8
Commit message (Collapse)AuthorAgeLines
* arm/arm64: implement a boot header capabilityAndre Przywara2016-06-06-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SPL loaders (like Allwinner's boot0, and Broadcom's boot0) require a header before the actual U-Boot binary to both check its validity and to find other data to load. Sometimes this header may only be a few bytes of information, and sometimes this might simply be space that needs to be reserved for a post-processing tool. Introduce a config option to allow assembler preprocessor commands to be inserted into the code at the appropriate location; typical assembler preprocessor commands might be: .space 1000 .word 0x12345678 Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Steve Rae <srae@broadcom.com> Commit Notes: Please note that the current code: start.S (arm64) and vectors.S (arm) already jumps over some portion of data already, so this option basically just increases the size of this region (and the resulting binary). For use with Allwinner's boot0 blob there is a tool called boot0img[1], which fills the header to allow booting A64 based boards. For the Pine64 we need a 1536 byte header (including the branch instruction) at the moment, so we add this to the defconfig. [1] https://github.com/apritzel/pine64/tree/master/tools END Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-06-06-0/+5
|\
| * ARM64: zynqmp: Extend page_table_sizeMichal Simek2016-06-06-0/+5
| | | | | | | | | | | | | | 0xc000 is not sufficient page table size if dc4 with 4 gems is enabled. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | armv8: fsl-layerscape: Add support of QorIQ LS1012A SoCPrabhakar Kushwaha2016-06-03-0/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. This patch add support of LS1012A SoC along with - Update platform & DDR clock read logic as per SVR - Define MMDC controller register set. - Update LUT base address for PCIe - Avoid L3 platform cache compilation - Update USB address, errata - SerDes table - Added CSU IDs for SDHC2, SAI-1 to SAI-4 Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Makarand Pawagi <makarand.pawagi@mindspeed.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: fsl-layerscape: Organize SoC overview at common locationPrabhakar Kushwaha2016-06-03-0/+86
| | | | | | | | | | | | | | | | | | | | SoC overviews are getting repeated across board folders. So, Organize SoC overview at common location i.e. fsl-layerscape/doc Also move README.lsch2 and README.lsch3 in same folder. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: fsl-layerscape: fix compile warning "rcw_tmp"Prabhakar Kushwaha2016-06-03-1/+4
| | | | | | | | | | | | | | | | | | | | | | arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c: In function ‘get_sys_info’: arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch2_speed.c:29:6: warning: unused variable ‘rcw_tmp’ [-Wunused-variable] u32 rcw_tmp; Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: fsl-layerscape: Avoid LS1043A specifc definesPrabhakar Kushwaha2016-06-03-1/+1
| | | | | | | | | | | | | | | | Other than LS1043A, LS1012A also Chassis Gen2 Architecture compliant. So Avoid LS1043A specific defines in arch/arm Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: fsl-layerscape: Put SMMU config code in SMMU_BASEPrabhakar Kushwaha2016-06-03-0/+2
|/ | | | | | | | | | It is not mandatory for Layerscape SoCs to have SMMU. SoCs like LS1012A are layerscape SoC without SMMU IP. So put SMMU configuration code under SMMU_BASE. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm64: rename __asm_flush_dcache_level to __asm_dcache_levelMasahiro Yamada2016-05-27-6/+6
| | | | | | | | | Since 1e6ad55c0582 ("armv8/cache: Change cache invalidate and flush function"), this routine can be used for both cache flushing and cache invalidation. So, it is better to not include "flush" in this routine name. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* arm64: fix comment "flush & invalidate"Masahiro Yamada2016-05-27-2/+2
| | | | | | We should say "clean & invalidate", or simply "flush". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* arm64: optimize __asm_{flush, invalidate}_dcache_allMasahiro Yamada2016-05-27-8/+2
| | | | | | | | | | __asm_dcache_all can directly return to the caller of __asm_{flush,invalidate}_dcache_all. We do not have to waste x16 register here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm: implement generic PSCI reset call for armv8Beniamino Galvani2016-05-27-0/+16
| | | | | | | | | Add a psci_system_reset() which calls the SYSTEM_RESET function of PSCI 0.2 and can be used by boards that support it to implement reset_cpu(). Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-05-24-7/+56
|\
| * armv8: fsl-layerscape: spl: fix the macro name of MMC modeQianyu Gong2016-05-18-1/+1
| | | | | | | | | | | | | | MMCSD_MODE_FAT has be renmaed to MMCSD_MODE_FS by commit 205b4f33. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: spl: remove duplicate init_early_memctl_regs()Qianyu Gong2016-05-18-3/+0
| | | | | | | | | | | | | | | | init_early_memctl_regs() is also be called in board_early_init_f(). So remove the duplicated call in spl code. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Remove unnecessary flushing dcacheAlison Wang2016-05-18-3/+0
| | | | | | | | | | | | | | | | | | As the issue about the stack will get corrupted when switching between the early and final mmu tables is fixed by commit 70e21b064, the workaround to flush dcache is unnecessary and should be removed. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/fdt: add fixup_crypto_nodeAlex Porosanu2016-05-17-0/+19
| | | | | | | | | | | | | | | | | | For Qoriq PPC&ARM v7 platforms, the crypto node is being fixup'ed in order to update the SEC internal version (aka SEC ERA). This patch adds the same functionality to the ARMv8 SoCs. Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8/ls1043: Add workaround for DDR erratum A-008850Shengzhou Liu2016-05-17-0/+36
| | | | | | | | | | | | | | | | | | Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | ARM64: zynqmp: Add SPL support supportMichal Simek2016-05-24-0/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support RAM and MMC boot mode in SPL also with SPL_FIT images. In MMC boot mode two boot options are available: 1) Boot flow with ATF(EL3) and full U-Boot(EL2): aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin mkimage -A arm64 -O linux -T kernel -C none -a 0xfffe5000 -e 0xfffe5000 -d bl31.bin atf.ub cp spl/boot.bin <sdcard fat partition> cp atf.ub <sdcard fat partition> cp u-boot.bin <sdcard fat partition> 2) Boot flow with full U-Boot(EL3): cp spl/boot.bin <sdcard> cp u-boot*.img <sdcard> 3) emmc boot mode dd if=/dev/zero of=sd.img bs=1024 count=1024 parted sd.img mktable msdos parted sd.img mkpart p fat32 0% 100% kpartx -a sd.img mkfs.vfat /dev/mapper/loop0p1 mount /dev/mapper/loop0p1 /mnt/ cp spl/boot.bin /mnt cp u-boot.img /mnt cp u-boot.bin /mnt cp atf.ub /mnt umount /dev/mapper/loop0p1 kpartx -d sd.img cp sd.img /tftpboot/ and program it via u-boot tftpb 10000 sd.img mmcinfo mmc write 10000 0 $filesize mmc rescan mmc part ls mmc 0 psu_init() function contains low level SoC setup generated for every HW design by Xilinx design tools. xil_io.h is only supporting file to fix all dependencies from tools. The same solution was used on Xilinx Zynq. The patch also change CONFIG_SYS_INIT_SP_ADDR to the end of OCM which stays at the same location all the time. Bootrom expects starting address to be at 0xfffc0000 that's why this address is SPL_TEXT_BASE. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | ARM: fix ifdef in ARMv8 lowlevel_init() againMasahiro Yamada2016-05-23-1/+1
|/ | | | | | | | | Commit 116611937faa ("ARM: fix ifdefs in ARMv8 lowlevel_init()") accidentally inverted the logic of CONFIG_ARMV8_MULTIENTRY. Fixes: 116611937faa ("ARM: fix ifdefs in ARMv8 lowlevel_init()") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* ARM: fix ifdefs in ARMv8 lowlevel_init()Stephen Warren2016-05-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 724219a65f55 "ARM: always perform per-CPU GIC init" removed some ifdefs to unify the MULTIENTRY-vs-non-MULTIENTRY paths. However, the wrong endif was removed. This patch adds back that missing endif, and adds a new ifdef to match the endif the now-correctly-terminated block used to match against. Use "git show -U25 724219a65f55" to see enough context to make the original issue clear. In practical terms, this makes no difference to runtime behaviour. The code that was incorrectly compiled into the binary when ifndef MULTIENTRY is a no-op for other cases, since branch_if_master evaluates to a hard- coded jump. The only issues were: - A few extra instructions were added to the binary. - The comment on the endif at the very end of the function, indicating which ifdef it matched, were wrong. An alternative might be to simply fix the comment on that trailing ifdef, but that only addresses the second point above, not the first. Fixes: 724219a65f55 ("ARM: always perform per-CPU GIC init") Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Fix various typos, scattered over the code.Robert P. J. Day2016-05-05-1/+1
| | | | | | | | | | | | | Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller
* ARM: always perform per-CPU GIC initStephen Warren2016-04-18-10/+0
| | | | | | | | | | | | | | | | | | The current code in ARMv8's lowlevel_init() skips the per-CPU GIC initialization ifndef CONFIG_ARMV8_MULTIENTRY. However, the per-CPU init should always occur; it's just the one-time init that should only happen on the master. Once this consideration is taken into account, the only difference between the paths when CONFIG_ARMV8_MULTIENTRY is undefined/defined is the use of branch_if_slave. Naively, any unified code would need to invoke this conditionally upon ifdef CONFIG_ARMV8_MULTIENTRY. However, branch_if_slave already checks CONFIG_ARMV8_MULTIENTRY and does nothing if it isn't defined, so we don't even need that ifdef at the call site. Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: allow CONFIG_GICV* not to be definedStephen Warren2016-04-11-2/+2
| | | | | | | | There are ARM SoCs (such as the BCM2837) do not contain an ARM GIC. Fix the ARMv8 CPU startup code to compile in this case. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* armv8: LS2080A: Consolidate LS2080A and LS2085AYork Sun2016-04-06-12/+39
| | | | | | | | | | | | LS2080A is the primary SoC, and LS2085A is a personality with AIOP and DPAA DDR. The RDB and QDS boards support both personality. By detecting the SVR at runtime, a single image per board can support both SoCs. It gives users flexibility to swtich SoC without the need to reprogram the board. Signed-off-by: York Sun <york.sun@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* ARM64: zynqmp: Select SYS_CONFIG_NAME via KconfigMichal Simek2016-04-04-9/+6
| | | | | | | | | This option enable adding new platform suport just by adding defconfig and DTS file which will target generic configuration for SoC. Make no sense to extend Kconfig just create a pointer between DTS and configuration file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* armv8: fsl-lsch3: Disable SMMU during secure bootSaksham Jain2016-03-29-1/+17
| | | | | | | | | | | | | During secure boot, SMMU is enabled on POR by SP bootrom. SMMU needs to be put in bypass mode in uboot to enable CAAM transcations to pass through. For non-secure boot, SP BootROM doesn't enable SMMU, which is in bypass mode out of reset. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Skip reconfigure QSPI clock when booting from QSPIQianyu Gong2016-03-28-1/+1
| | | | | | | | The qspi_cfg register is set by PBI when booting from QSPI. No need to changing it again. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/fsl-lsch2: fix sdhc clock frequency valueYangbo Lu2016-03-21-0/+4
| | | | | | | | | The eSDHC could select to use platform clock or peripheral clock to generate SD clock. The default selection is platform clock. So, fix the clock frequency value that's calculated for eSDHC. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Updating entries in Serdes TablePratiyush Srivastava2016-03-21-7/+7
| | | | | | | | | | | The serdes protocol entries in Serdes table 1 for protocol 0x03, 0x33, 0x35 and in Serdes table 2 for protocols 0x45 and 0x47 are updated to reflect the entries in current Reference Manual. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Reported-by: Jose Rivera <german.rivera@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080a: remove obsolete stream ID partitioning supportStuart Yoder2016-03-21-113/+0
| | | | | | | | | | Remove stream ID partitioning support that has been made obsolete by upstream device tree bindings that specify how representing how PCI requester IDs are mapped to MSI specifiers and SMMU stream IDs. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: lsch3: Enable WUO config for RNI-20 nodePrabhakar Kushwaha2016-03-21-0/+8
| | | | | | | | | | Enable wuo config to accelerate coherent ordered writes for LS2080A and LS2085A. WRIOP IP is connected to RNI-20 Node. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm64: Fix layerscape mmu setupAlexander Graf2016-03-21-1/+6
| | | | | | | | | | | | | | | | | | With commit 7985cdf we converted all systems except for the Layerscape SoCs to the generic descriptor table based page table setup. On the Layerscape SoCs however, we just provide an empty table stub and do the setup ourselves. To reserve enough memory for the tables, we need to override the default counting mechanism which would end up with an empty table because we have no maps. Fixes: 7985cdf Reported-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: York Sun <york.sun@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* arm64: Allow exceptions to returnAlexander Graf2016-03-15-0/+34
| | | | | | | | | | | | | | Our current arm64 exception handlers all panic and never return to the exception triggering code. But if any handler wanted to continue execution after fixups, it would need help from the exception handling code to restore all registers. This patch implements that help. With this code, exception handlers on aarch64 can successfully return to the place the exception happened (or somewhere else if they modify elr). Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: Add runtime servicesAlexander Graf2016-03-15-0/+16
| | | | | | | | | | | | | | | | | After booting has finished, EFI allows firmware to still interact with the OS using the "runtime services". These callbacks live in a separate address space, since they are available long after U-Boot has been overwritten by the OS. This patch adds enough framework for arbitrary code inside of U-Boot to become a runtime service with the right section attributes set. For now, we don't make use of it yet though. We could maybe in the future map U-boot environment variables to EFI variables here. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* arm64: Only allow dcache disabled in SPL buildsAlexander Graf2016-03-15-0/+9
| | | | | | | | | Now that we have an easy way to describe memory regions and enable the MMU, there really shouldn't be anything holding people back from running with caches enabled on AArch64. To make sure people catch early if they're missing on the caching fun, give them a compile error. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: Remove non-full-va map codeAlexander Graf2016-03-15-95/+32
| | | | | | | | | | | By now the code to only have a single page table level with 64k page size and 42 bit address space is no longer used by any board in tree, so we can safely remove it. To clean up code, move the layerscape mmu code to the new defines, removing redundant field definitions. Signed-off-by: Alexander Graf <agraf@suse.de>
* zymqmp: Replace home grown mmu code with generic table approachAlexander Graf2016-03-15-169/+48
| | | | | | | Now that we have nice table driven page table creating code that gives us everything we need, move to that. Signed-off-by: Alexander Graf <agraf@suse.de>
* thunderx: Move mmu table into board fileAlexander Graf2016-03-15-5/+3
| | | | | | | | | The MMU range table can vary depending on things we may only find out at runtime. While the very simple ThunderX variant does not change, other boards will, so move the definition from a static entry in a header file to the board file. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: Make full va map code more dynamicAlexander Graf2016-03-15-55/+452
| | | | | | | | | | | | | | | | | | | The idea to generate our pages tables from an array of memory ranges is very sound. However, instead of hard coding the code to create up to 2 levels of 64k granule page tables, we really should just create normal 4k page tables that allow us to set caching attributes on 2M or 4k level later on. So this patch moves the full_va mapping code to 4k page size and makes it fully flexible to dynamically create as many levels as necessary for a map (including dynamic 1G/2M pages). It also adds support to dynamically split a large map into smaller ones when some code wants to set dcache attributes. With all this in place, there is very little reason to create your own page tables in board specific files. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: Disable TTBR1 maps in EL1Alexander Graf2016-03-15-1/+1
| | | | | | | | | | | | When running in EL1, AArch64 knows two page table maps. One with addresses that start with all zeros (TTBR0) and one with addresses that start with all ones (TTBR1). In U-Boot we don't care about the high up maps, so just disable them to ensure we don't walk an invalid page table by accident. Reported-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* thunderx: Calculate TCR dynamicallyAlexander Graf2016-03-15-1/+58
| | | | | | | | Based on the memory map we can determine a lot of hard coded fields of TCR, like the maximum VA and max PA we want to support. Calculate those dynamically to reduce the chance for pit falls. Signed-off-by: Alexander Graf <agraf@suse.de>
* arm64: define _image_binary_end to fix SPL_OF_CONTROLMasahiro Yamada2016-03-14-0/+2
| | | | | | | | | | | | | | | | | | To make SPL_OF_CONTROL work on ARM64 SoCs, _image_binary_end must be defined in the linker script. LD spl/u-boot-spl lib/built-in.o: In function `fdtdec_setup': lib/fdtdec.c:1186: undefined reference to `_image_binary_end' lib/fdtdec.c:1186: undefined reference to `_image_binary_end' make[1]: *** [spl/u-boot-spl] Error 1 make: *** [spl/u-boot-spl] Error 2 Note: CONFIG_SPL_SEPARATE_BSS must be defined as well on ARM64 SoCs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* armv8/fsl-layerscape: fdt: add fixup for Fman ucodeQianyu Gong2016-02-24-0/+7
| | | | | | | Add fdt fixup to insert Fman firmware into the device tree. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/ls1043a: Implement workaround for erratum A009660Mingkai Hu2016-02-24-0/+19
| | | | | | | | | Memory controller performance is not optimal with default internal target queue register value, write required value for optimal DDR performance. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Use correct spelling of "U-Boot"Bin Meng2016-02-06-1/+1
| | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* armv8: ls2080a: Implement workaround for core errata 829520, 833471Ashish kumar2016-02-01-0/+19
| | | | | | | | | | | | | 829520: Code bounded by indirect conditional branch might corrupt instruction stream. Workaround: Set CPUACTLR_EL1[4] = 1'b1 to disable the Indirect Predictor. 833471: VMSR FPSCR functional failure or deadlock. Workaround: Set CPUACTLR[38] to 1, which forces FPSCR write flush. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-01-27-5/+12
|\
| * armv8/ls1043aqds: add QSPI support in SD bootGong Qianyu2016-01-27-0/+3
| | | | | | | | | | | | | | | | | | QSPI and IFC are pin-multiplexed on LS1043A. So we use ls1043aqds_sdcard_ifc_defconfig to support IFC in SD boot and ls1043aqds_sdcard_qspi_defconfig to support QSPI in SD boot. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * secure_boot: enable chain of trust for ARM platformsAneesh Bansal2016-01-27-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Chain of Trust is enabled for ARM platforms (LS1021 and LS1043). In board_late_init(), fsl_setenv_chain_of_trust() is called which will perform the following: - If boot mode is non-secure, return (No Change) - If boot mode is secure, set the following environmet variables: bootdelay = 0 (To disable Boot Prompt) bootcmd = CONFIG_CHAIN_BOOT_CMD (Validate and execute Boot script) Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Acked-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-11-08 06:36:26 +0000