summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv8/fsl-layerscape
Commit message (Collapse)AuthorAgeLines
* armv8: fsl-layerscape: SMP support for loading 32-bit OSAlison Wang2016-11-22-0/+10
| | | | | | | | | | | Spin-table method is used for secondary cores to load 32-bit OS. The architecture information will be got through checking FIT image and saved in the os_arch element of spin-table, then the secondary cores will check os_arch and jump to 32-bit OS or 64-bit OS automatically. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: Support loading 32-bit OS in AArch32 execution stateAlison Wang2016-11-22-10/+51
| | | | | | | | | | | | | To support loading a 32-bit OS, the execution state will change from AArch64 to AArch32 when jumping to kernel. The architecture information will be got through checking FIT image, then U-Boot will load 32-bit OS or 64-bit OS automatically. Signed-off-by: Ebony Zhu <ebony.zhu@nxp.com> Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/fsl-lsch3: Update code to release secondary coresPriyanka Jain2016-11-22-5/+66
| | | | | | | | | | | | | | | NXP ARMv8 SoC LS2080A release all secondary cores in one-go. But other new SoCs like LS2088A, LS1088A release secondary cores one by one. Update code to release secondary cores based on SoC SVR Add code to release cores one by one for non LS2080A SoCs Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [YS: remove "inline" from declaration of initiator_type] Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Add NXP LS2088A SoC supportPriyanka Jain2016-11-22-2/+62
| | | | | | | | | | | | The QorIQ LS2088A SoC is built on layerscape architecture. It is similar to LS2080A SoC with some differences like 1)Timer controller offset is different 2)It has A72 cores 3)It supports TZASC module Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape : Check SVR for initializing TZASCPriyanka Jain2016-11-22-1/+12
| | | | | | | | | | LS2080 SoC and its personalities does not support TZASC But other new SoCs like LS2088A, LS1088A supports TZASC Hence, skip initializing TZASC for Ls2080A based on SVR Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Update TZASC registers typePriyanka Jain2016-11-22-14/+14
| | | | | | | | | | | TZASC registers like TZASC_GATE_KEEPER, TZASC_REGION_ATTRIBUTES are 32-bit regsiters. So while doing register load-store operations, 32-bit intermediate register, w0 should be used. Update x0 register to w0 register type. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: lsch3: Use SVR based timer base address detectionPriyanka Jain2016-11-22-0/+9
| | | | | | | | | | | | Timer controller base address has been changed from LS2080A SoC (and its personalities) to new SoCs like LS2088A, LS1088A. Use SVR based timer base address detection to avoid compile time #ifdef. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: lsch3: Add generic get_svr() in assemblyPriyanka Jain2016-11-22-0/+11
| | | | | Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/fsl-layerscape: Update CONFIG_LS2080A to CONFIG_FSL_LSCH3Shengzhou Liu2016-11-21-3/+4
| | | | | | | | Update CONFIG_LS2080A to CONFIG_FSL_LSCH3 to make those workaround implementing of erratum reusable for more SoCs. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Add README for deploying QSPI imageYuan Yao2016-11-21-0/+42
| | | | | | Signed-off-by: Yuan Yao <yao.yuan@nxp.com> [YS: Reviese commit subject] Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080a: Update serdes protocol supportPriyanka Jain2016-11-21-0/+6
| | | | | | | | | | | | Add these serdes protocols Serdes1: 0x39, 0x4B, 0x4C, 0x4D Serdes2: 0x47, 0x57 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> [YS: Revise commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Add support for efi_loader RTS resetAlexander Graf2016-11-17-2/+31
| | | | | | | | | | When implementing efi loader support, we can expose runtime services for payloads. One such service is CPU reset. This patch implements RTS CPU reset support for layerscape systems. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls2080a: Declare spin tables as reserved for efi loaderAlexander Graf2016-11-17-0/+6
| | | | | | | | The efi loader code has its own memory map, so it needs to be aware where the spin tables are located, to ensure that no code writes into those regions. Signed-off-by: Alexander Graf <agraf@suse.de>
* armv8: add hooks for all cache-wide operationsStephen Warren2016-11-07-2/+2
| | | | | | | | | | | | | | SoC-specific logic may be required for all forms of cache-wide operations; invalidate and flush of both dcache and icache (note that only 3 of the 4 possible combinations make sense, since the icache never contains dirty lines). This patch adds an optional hook for all implemented cache-wide operations, and renames the one existing hook to better represent exactly which operation it is implementing. A dummy no-op implementation of each hook is provided. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* armv8: fsl-layerscape: Move DDR config options to KconfigYork Sun2016-10-06-0/+54
| | | | | | | | Move DDR3, DDR4 and realted options to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Move SYS_FSL_SRDS_* and SYS_HAS_SERDES to KconfigYork Sun2016-10-06-0/+16
| | | | | | | Move these options to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Move FSL_HAS_DP_DDR and NUM_DDR_CONTROLLERS to KconfigYork Sun2016-10-06-0/+8
| | | | | | | | Move this option to Kconfig and clean up existing uses. NUM_DDR_CONTROLLERS is also used by PowerPC SoCs. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Move SYS_FSL_IFC_BANK_COUNT to KconfigYork Sun2016-10-06-0/+7
| | | | | | | | Move this option to Kconfig and clean up existing uses. This option is also used by PowerPC SoCs. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Move MAX_CPUS to KconfigYork Sun2016-10-06-0/+13
| | | | | | | | Move MAX_CPUS option to Kconfig and clean up existing uses for ARM. This option is used by Freescale Layerscape SoCs. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Move FSL_LSCH2 FSL_LSCH3 to KconfigYork Sun2016-10-06-0/+15
| | | | | | | | Move these options to Kconfig and create a sub-menu to avoid name conflict with other architectures. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* arm: Fix Kconfig for proper display menuYork Sun2016-10-06-4/+7
| | | | | | | | Some config options should not have prompt. They are selected by choosing target. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* armv8: fsl: Enable USB only when SYSCLK is 100 MHzSriram Dash2016-10-06-0/+20
| | | | | | | | SYSCLK is used as a reference clock for USB. When the USB controller is used, SYSCLK must meet the additional requirement of 100 MHz. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8/fsl-lsch2: Implement workaround for PIN MUX erratum A010539Hou Zhiqiang2016-10-06-0/+19
| | | | | | | | | | | | | Pin mux logic has 2 options in priority order, one is through RCW_SRC and then through RCW_Fields. In case of QSPI booting, RCW_SRC logic takes the priority for SPI pads and do not allow RCW_BASE and SPI_EXT to control the SPI muxing. But actually those are DSPI controller's pads instead of QSPI controller's, so this workaround allows RCW fields SPI_BASE and SPI_EXT to control relevant pads muxing. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [York Sun: Reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Fix "cpu status" commandYork Sun2016-10-06-4/+33
| | | | | | | | | | | | | | The core position is not continuous for some SoCs. For example, valid cores may present at position 0, 1, 4, 5, 8, 9, etc. Some registers (including boot release register) only count existing cores. Current implementation of cpu_mask() complies with the continuous numbering. However, command "cpu status" queries the spin table with actual core position. Add functions to calculate core position from core number, to correctly calculate offsets. Tested on LS2080ARDB and LS1043ARDB. Signed-off-by: York Sun <york.sun@nxp.com>
* armv8/fsl-layerscape: print SoC revsion numberWenbin Song2016-10-06-0/+3
| | | | | | | | The exact SoC revsion number can be recognized from U-Boot log. Signed-off-by: Wenbin Song <wenbin.song@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-lsch2: enable snoopable sata read and writeTang Yuantian2016-10-06-1/+4
| | | | | | | | | | | | By default the SATA IP on the ls1043a/ls1046a SoCs does not generating coherent/snoopable transactions. This patch enable it in the SCFG_SNPCNFGCR register along with sata axicc register. In addition, the dma-coherent property must be set on the SATA controller nodes. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> [York Sun: Reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-lsch2: adjust sata parameterTang Yuantian2016-10-06-2/+0
| | | | | | | | The default values for Port Phy2Cfg register and Port Phy3Cfg register are better, no need to overwrite them. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-09-26-20/+110
|\ | | | | | | | | | | | | trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * Convert CONFIG_SYS_FSL_ERRATUM_A010315 to Kconfig optionYork Sun2016-09-26-0/+8
| | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
| * armv8: ls1012a: Convert CONFIG_LS1012A to Kconfig option ARCH_LS1021AYork Sun2016-09-26-3/+10
| | | | | | | | | | | | | | | | | | Move this config to Kconfig option and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Calvin Johnson <calvin.johnson@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046a: Convert CONFIG_LS1046A to Kconfig option ARCH_LS1046AYork Sun2016-09-26-3/+5
| | | | | | | | | | | | | | | | | | Move this option to Kconfig and clean up existing uses. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> CC: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046a: disable SATA ECC in DCSRShaohui Xie2016-09-14-0/+4
| | | | | | | | | | | | | | | | | | This is a workaround to fix SATA CRC error. Once the root cause is found the ECC disabling will be removed. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: spl: remove BSS clearing and board_init_rQianyu Gong2016-09-14-5/+0
| | | | | | | | | | | | | | | | | | | | As per the top level U-Boot README "Board Initialisation Flow" section, board_init_f() should return without calling board_init_r() directly. Clearing BSS and calling board_init_r() will be done in crt0_64.S. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latencyMingkai Hu2016-09-14-0/+15
| | | | | | | | | | | | | | | | | | | | | | According to design specification, the L2 cache operates at the same frequency as the A72 CPUs in the cluster with a 3-cycle latency, so increase the L2 Data RAM and Tag RAM latency to 3 cycles, or else, will run into different call trace issues. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Remove debug server supportYork Sun2016-09-14-5/+0
| | | | | | | | | | | | Debug server feature has been dropped from roadmap. Signed-off-by: York Sun <york.sun@nxp.com>
| * fsl-layerscape: Add workaround for PCIe erratum A010315Hou Zhiqiang2016-09-14-0/+16
| | | | | | | | | | | | | | | | | | | | As the access to serders protocol unselected PCIe controller will hang. So disable the R/W permission to unselected PCIe controller including its CCSR, IO space and memory space according to the serders protocol field of RCW. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: fsl-layerscape: move forward the non-secure access permission setupHou Zhiqiang2016-09-14-4/+5
| | | | | | | | | | | | | | | | | | | | Move forward the basic non-secure access enable operation, so the subsequent individual device access permission can override it. And collect the dispersed callers in board level, and then move them to SoC level. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: serdes: ensure accessing the initialized maps of serdes protocolHou Zhiqiang2016-09-14-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ls1043ardb: PPA: add PPA validation in case of secure bootSumit Garg2016-09-14-0/+21
| | | | | | | | | | | | | | | | | | | | As part of Secure Boot Chain of trust, PPA image must be validated before the image is started. The code for the same has been added. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Update ddr erratum a008336Shengzhou Liu2016-09-14-2/+4
| | | | | | | | | | | | | | | | | | DDR erratum A008336 only applies to DDR controller v5.2.0. DDR controller v5.2.1 already has default 0x43b30002 in EDDRTQCR1 register for optimal performance. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-3/+3
|/ | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* ARMv8/fsl-ppa: Consolidate PPA image stored-media flag for XIPHou Zhiqiang2016-08-02-1/+1
| | | | | | | | | | | The PPA binary may be stored on QSPI flash instead of NOR. So, deprecated CONFIG_SYS_LS_PPA_FW_IN_NOR in favour of CONFIG_SYS_LS_PPA_FW_IN_XIP to prevent fragmentation of code by addition of a new QSPI specific flag. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: mmu: Fix enabling MMUYork Sun2016-07-26-1/+4
| | | | | | | | | MMU bit in SCTLR needs to be set explicitly after tables are created. It isn't an issue for EL3 becuase this bit is already set by early MMU setup. But for other exception levels this bit was not set. Signed-off-by: York Sun <york.sun@nxp.com>
* armv8: fsl_lsch2: Add LS1046A SoC supportMingkai Hu2016-07-26-2/+168
| | | | | | | | | | | The LS1046A processor is built on the QorIQ LS series architecture combining four ARM A72 processor cores with DPAA 1.0 support. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Mihai Bantea <mihai.bantea@freescale.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl_lsch2: Add SerDes 2 supportQianyu Gong2016-07-26-0/+19
| | | | | | | | | New SoC LS1046A belongs to Freescale Chassis Generation 2 and has two SerDes so we need to add this support in fsl_lsch2. The SoC related SerDes 2 support will be added in SoC patch. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Add A72 core detectionAlison Wang2016-07-26-1/+2
| | | | | | | | | | Add support to detect Cortex-A72 core for printing it out. The Initiator Version of A72 core should be 0x4. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-07-19-319/+159
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: arch/arm/cpu/armv8/Makefile arch/arm/lib/bootm-fdt.c
| * ARMv8/Layerscape: switch SMP method accordinglyHou Zhiqiang2016-07-19-3/+46
| | | | | | | | | | | | | | | | | | If the PSCI and PPA is ready, skip the fixup for spin-table and waking secondary cores. Otherwise, change SMP method to spin-table, and the device node of PSCI will be removed. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ARMv8/layerscape: Add FSL PPA supportHou Zhiqiang2016-07-19-0/+49
| | | | | | | | | | | | | | | | | | | | | | The FSL Primary Protected Application (PPA) is a software component loaded during boot which runs in TrustZone and remains resident after boot. Use the secure firmware framework to integrate FSL PPA into U-Boot. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: add i/d-cache enable function to enable_cachesHou Zhiqiang2016-07-19-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | This function assume that the d-cache and MMU has been enabled earlier, so it just created MMU table in main memory. But the assumption is not always correct, for example, the early setup is done in EL3, while enable_caches() is called when the PE has turned into another EL. Define the function mmu_setup() for fsl-layerscape to cover the weak one. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-07-16 01:03:52 +0000