summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7
Commit message (Collapse)AuthorAgeLines
...
| * imx: mx6: ddr: support i.MX6D/QPlusPeng Fan2016-05-24-2/+2
| | | | | | | | | | | | | | Support i.MX6D/QPlus. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6: use simpler runtime cpu dection macrosPeng Fan2016-05-24-36/+29
| | | | | | | | | | | | | | | | Use simpler runtime cpu dection macros. i.MX6DL and i.MX6SOLO work the same, so use is_mx6sdl. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6: support i.MX6SOLO when enable/disable_ldb_di_clock_sourcesPeng Fan2016-05-24-2/+2
| | | | | | | | | | | | | | | | i.MX6DL and i.MX6SOLO work the same, add i.MX6SOLO support when enable/disable_ldb_di_clock_sources. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: correct speed grading info for i.MX6ULPeng Fan2016-05-18-0/+15
| | | | | | | | | | | | | | Correct speed grading info for i.MX6UL Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | mtd: nand: omap: allow to switch to BCH16Heiko Schocher2016-06-09-2/+4
| | | | | | | | | | | | | | support in omap_nand_switch_ecc() also an eccstrength from 16. Signed-off-by: Heiko Schocher <hs@denx.de>
* | armv7: omap-common: make SPL board_mmc_init() weakHeiko Schocher2016-06-09-1/+1
| | | | | | | | | | | | | | make this function weak, so board code can setup in SPL MMC init with board special values. Signed-off-by: Heiko Schocher <hs@denx.de>
* | arm, am335x: Enable Spread Spectrum for the MPUHeiko Schocher2016-06-09-0/+73
| | | | | | | | | | | | | | | | Enable Spread Spectrum for the MPU by calculating the required values and setting the registers accordingly. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge http://git.denx.de/u-boot-samsungTom Rini2016-06-06-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
| * | exynos: pwm: Add a driver for the exynos5 PWMSimon Glass2016-05-25-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This driver supports the standard PWM API. There are 5 PWMs. Four are used normally and the last is normally used as a timer. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | armv7: fix order of OMAP die ID printingLadislav Michl2016-06-06-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* | | arm: omap: Introduce vcores_init functionKeerthy2016-06-02-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | The pmic registers for variants of am57xx boards are different hence we need to assign them carefully based on the board type. Add a function to assign omap_vcores after the board detection. Signed-off-by: Keerthy <j-keerthy@ti.com>
* | | ARM: DRA7: Consolidate voltage macros across different SoCsAnna, Suman2016-06-02-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The voltage values for each voltage domain at an OPP is identical across all the SoCs in the DRA7 family. The current code defines one set of macros for DRA75x/DRA74x SoCs and another set for DRA72x macros. Consolidate both these sets into a single set. This is done so as to minimize the number of macros used when voltage values will be added for other OPPs as well. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | ARM: DRA7: Define common macros for efuse register offsetsAnna, Suman2016-06-02-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define a set of common macros for the efuse register offsets (different for each OPP) that are used to get the AVS Class 0 voltage values and ABB configuration values. Assign these common macros to the register offsets for OPP_NOM by default for all voltage domains. These common macros can then be redefined properly to point to the OPP specific efuse register offset based on the desired OPP to program a specific voltage domain. Signed-off-by: Suman Anna <s-anna@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | dra7xx: Enable USB_PHY3 32KHz clockRoger Quadros2016-06-02-2/+13
| | | | | | | | | | | | | | | | | | | | | DRA7xx has a 32KHz PHY clock for USB_PHY3 that must be enabled for USB1 instance in Super-Speed. Signed-off-by: Roger Quadros <rogerq@ti.com>
* | | ARM: OMAP5+: Provide enable/disable_usb_clocks() for CONFIG_USB_XHCI_OMAPRoger Quadros2016-06-02-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_USB_XHCI_OMAP is enabled for host mode independent of CONFIG_USB_DWC3 which is meant for gadget mode only. We need enable/disbale_usb_clocks() for host mode as well so provide for it. Fixes: 09cc14f4bcbf ("ARM: AM43xx: Add functions to enable and disable USB clocks" Signed-off-by: Roger Quadros <rogerq@ti.com>
* | | ARM: OMAP4+: Fix DPLL programming sequenceLokesh Vutla2016-05-27-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the output clock parameters of a DPLL needs to be programmed before locking the DPLL. But it is being configured after locking the DPLL which could potentially bypass DPLL. So fixing this sequence. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com>
* | | ARM: AM33xx: Add support for Clock SynthesizerLokesh Vutla2016-05-27-0/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CDCE913 and CDCEL913 devices are modular PLL-based, low cost, high performance , programmable clock synthesizers. They generate upto 3 output clocks from a single input frequency. Each output can be programmed for any clock-frequency. Adding support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | ARM: omap5: add hooks for cpu/SoC fdt fixupsDaniel Allred2016-05-27-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds an fdt.c file in that defines the ft_cpu_setup() function, which should be called from a board-specific ft_board_setup()). This ft_cpu_setup() will currently do nothing for non-secure (GP) devices but contains pertinent updates for booting on secure (HS) devices. Update the omap5 Makefile to include the fdt.c in the build. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: omap-common: Add device type to CPU stringDaniel Allred2016-05-27-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the CPU string output so that the device type is now included as part of the CPU string that is printed as the SPL or u-boot comes up. This update adds a suffix of the form "-GP" or "-HS" for production devices, so that general purpose (GP) and high security (HS) can be distiguished. Applies to all OMAP5 variants. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | spl: build: ti: add support for secure boot imagesDaniel Allred2016-05-27-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updates the SPL build so that when CONFIG_TI_SECURE_DEVICE is in use (which it should be when building for secure parts), the TI secure development package is used to create a valid secure boot image. The u-boot SPL build processes is NOT aware of the details of creating the boot image - all of that information is encapsulated in the TI secure development package, which is available from TI. More info can be found in README.ti-secure Right now, two image types are generated, MLO and X-LOADER. The types are important, as certain boot modes implemented by the device's ROM boot loader require one or the other (they are not equivalent). The output filenames are u-boot-spl_HS_MLO and u-boot-spl_HS_X-LOADER. The u-boot-spl_HS_MLO image is also copied to a file named MLO, which is the name that the device ROM bootloader requires for loading from the FAT partition of an SD card (same as on non-secure devices). Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ti: AM43xx: config.mk: Add support for generating secure boot imagesDaniel Allred2016-05-27-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modifies the config.mk to build secure images when building the SPL for secure devices. Depending on the boot media, different images are needed for secure devices. The build generates u-boot*_HS_* files as appropriate for the different boot modes. The same u-boot binary file is processed slightly differently to produce a different boot image, depending on whether the user wants to boot off SPI, QSPI or other boot media. Refer to README.ti-secure for more information. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ti: omap-common: Add commands for generating secure SPL imagesDaniel Allred2016-05-27-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a centralized config_secure.mk in omap-common for OMAP-style TI secure devices to use for boot image generation Depending on the boot media, different images are needed for secure devices. These commands generates u-boot*_HS_* files that need to be used to boot secure devices. Please refer to README.ti-secure for more information. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ti: omap-common: Add Kconfig file for secure device supportMadan Srinivas2016-05-27-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Defines CONFIG_TI_SECURE_DEVICE which needs to be turned on when building images for secure devices. This flag is used to invoke the secure image creation tools for creating a boot image that can be used on secure devices. This flag may also be used to conditionally compile code specific to secure devices. This terminology will be used by all OMAP architecture devices, hence introducing to a common location. With the creation of Kconfig for omap-common, moved the sourcing of the Kconfig files for the omap3/4/5 and am33xx devices from arch/arm/KConfig to the omap-common one. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | arm: Kconfig: Add support for AM43xx SoC specific KconfigMadan Srinivas2016-05-27-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | arm: am33xx: Kconfig: Add secure device definitionsMadan Srinivas2016-05-27-0/+27
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a new Kconfig file for AM33xx class devices. We need a common place to define CONFIG parameters for these SOCs, especially for adding support for secure devices. a) Adds a definition for ISW_ENTRY_ADDR. This is the address to which the ROM branches when the SOC ROM hands off execution to the boot loader. CONFIG_SYS_TEXT_BASE and CONFIG_SPL_TEXT_BASE are set to this value for AM43xx devices. b) Adds CONFIG_PUB_ROM_DATA_SIZE which is used to calculate CONFIG_SPL_MAX_SIZE. This value indicates the amount of memory needed by the ROM to store data during the boot process. Currently, these CONFIG options are used only by AM43xx, but in future other AM33xx class SOCs will also use them. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-05-24-1/+1
|\ \ | |/ |/|
| * armv7: ls102xa: spl: fix the macro name of MMC modeQianyu Gong2016-05-18-1/+1
| | | | | | | | | | | | | | MMCSD_MODE_FAT has been renamed to MMCSD_MODE_FS by commit 205b4f33. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | imx: imx7d: fix ahb clock mux 1Stefan Agner2016-05-17-1/+1
|/ | | | | | | | | | | | | | The clock parent of the AHB root clock when using mux option 1 is the SYS PLL 270MHz clock. This is specified in Table 5-11 Clock Root Table of the i.MX 7Dual Applications Processor Reference Manual. While it could be a documentation error, the 270MHz parent is also mentioned in the boot ROM configuration in Table 6-28: The clock is by default at 135MHz due to a POST_PODF value of 1 (=> divider of 2). Signed-off-by: Stefan Agner <stefan@agner.ch>
* ARM: am33xx: Fix DDR initialization delaysRuss Dill2016-05-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | The current delays in the DDR initialization routines for am33xx architectures are sometimes not running long enough leading to DDR init errors. On am437x, this shows up as an L3 NOC error after the kernel boots. This is due to the timer not being initialized properly, but instead still containing the timer init values from the boot ROM which cause timers to expire in 1/4th the time required. timer_init is typically not called until board_init_r, however on am33xx/am43xx udelay is required in sdram_init which is called from board_init_f, so a call to timer_init is required earlier. Note that this issue introduced in v2015.01 by: b352dde "am33xx: Drop timer_init call from s_init". Although this could instead fixed by reverting said commit, it would cause timer_init to be called twice in both SPL and non-SPL cases. This gives a little more fine grained control and also matches what is being done on omap-command and fsl-layerscape. Signed-off-by: Russ Dill <russ.dill@ti.com>
* Revert "omap3: Use raw SPL by default for mmc1"Tom Rini2016-05-02-0/+2
| | | | | | | | | | | | | Unfortunately with this change we now are unable to do FS mode boots from MMC1 as with the way the code works today we will always load and assume that the hard-coded raw location contains U-Boot. Further, we cannot fix this by just changing other logic to try FS-then-RAW as it would also make us have to ignore what order the ROM is telling us to try. This reverts commit 22d90d560a2b01c47f180e196e6c6485eb8e65db. Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: DRA7: Add ABB setup for all domainsNishanth Menon2016-04-25-0/+40
| | | | | | | | | | | | | ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP5: Enable ABB configuration for MM voltage domainNishanth Menon2016-04-25-0/+14
| | | | | | | | | | Since we setup the voltage and frequency for the MM domain, we *must* setup the ABB configuration needed for the domain as well. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP5/DRA7: Move ABB TXDONE mask to voltage structureNishanth Menon2016-04-25-2/+5
| | | | | | | | | | | ABB TX_DONE mask will vary depending on ABB module. For example, 3630 never had ABB on IVA domain, while OMAP5 does use ABB on MM domain, DRA7 has it on all domains with the exception of CORE, RTC. Hence, move the txdone mask definition over to structure describing voltage domain. Signed-off-by: Nishanth Menon <nm@ti.com>
* ARM: OMAP5/DRA7: Get rid of control_std_fuse_opp_vdd_mpu_2Nishanth Menon2016-04-25-4/+2
| | | | | | | | | | | | | This information is already available under vcores->volts.efuse.reg. There is no reason for duplicating the information since AVS Class 0 definitions are common for OMAP5 and DRA7 and defined with STD_FUSE_OPP_* macros. This allows a central location of defining the ABB and voltage definitions especially since they are reused. This also makes it simpler to prevent mistakes involved when changing the boot OPP for the device. Signed-off-by: Nishanth Menon <nm@ti.com>
* Add initial support for Technexion's PICO-IMX6UL-EMMC boardFabio Estevam2016-04-19-0/+5
| | | | | | | | | | Add support for Technexion's PICO-IMX6UL-EMMC board. For information about this board, please visit: http://www.technexion.com/products/pico/pico-som/pico-imx6-emmc Signed-off-by: Richard Hu <richard.hu@technexion.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx: mx6: Fix procedure to switch the parent of LDB_DI_CLKAkshay Bhat2016-04-19-0/+151
| | | | | | | | | | | | | | | | | | | | | Due to incorrect placement of the clock gate cell in the ldb_di[x]_clk tree, the glitchy parent mux of ldb_di[x]_clk can cause a glitch to enter the ldb_di_ipu_div divider. If the divider gets locked up, no ldb_di[x]_clk is generated, and the LVDS display will hang when the ipu_di_clk is sourced from ldb_di_clk. To fix the problem, both the new and current parent of the ldb_di_clk should be disabled before the switch. This patch ensures that correct steps are followed when ldb_di_clk parent is switched in the beginning of boot. This patch was ported from the 3.10.17 NXP kernel http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/?h=imx_3.10.17_1.0.1_ga&id=eecbe9a52587cf9eec30132fb9b8a6761f3a1e6d NXP errata number: ERR009219, EB821 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-04-13-41/+89
|\
| * imx: mx7d: move MX7D to Kconfig entryPeng Fan2016-03-26-0/+1
| | | | | | | | | | | | | | | | | | | | | | If including MX7D in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX7D to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX7D" to boards using i.MX7 Dual. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * imx: mx6sx: move MX6SX to Kconfig entryPeng Fan2016-03-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | If including MX6SX in CONFIG_SYS_EXTRA_OPTIONS, CONFIG_ROM_UNIFIED_SECTIONS will not effect.So move MX6SX to Kconfig entry from CONFIG_SYS_EXTRA_OPTIONS to "select MX6SX" to boards using i.MX6 SoloX. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * arm: mx6: Add CCV xPress board supportStefan Roese2016-03-26-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for the CCV xPress board which is equipped with the i.MX6UL. And provides the following interfaces: - 128MiB DDR - UART - I2C - eMMC (with booting) - Ethernet - USB This patch adds two build targets. One with and one without SPL. The non-SPL version is used for loading U-Boot via USB (imx_usb_loader). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * warp7: Add initial supportFabio Estevam2016-03-26-0/+7
| | | | | | | | | | | | | | | | | | | | | | Add the basic support for Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| * arm: imx6: Switch DDR3 calibration to wait_for_bit()Marek Vasut2016-03-25-32/+12
| | | | | | | | | | | | | | | | | | Switch the DDR3 calibration from ad-hoc implementation of wait_for_bit() to generic implementation of wait_for_bit(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: print ARM clock for clocks commandPeng Fan2016-03-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Default print ARM clock for clocks command. Test on i.MX6UL 14x14 evk board: " => clocks PLL_SYS 792 MHz PLL_BUS 528 MHz PLL_OTG 480 MHz PLL_NET 50 MHz ARM 396000 kHz " Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6ul configure the PMIC_STBY_REQ pin as open drainPeng Fan2016-03-25-1/+11
| | | | | | | | | | | | | | | | | | Configure the PMIC_STBY_REQ pin as open drain 100K according to the design team's requirement for the PMIC_STBY_REQ pin for i.MX 6UltraLite TO1.0. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6ul: skip setting ahb ratePeng Fan2016-03-25-7/+12
| | | | | | | | | | | | | | | | To i.MX6UL, default ARM rate and AHB rate is 396M and 198M, no need to set them. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6: Fix incorrect clear mmdc_ch0 handshake maskYe Li2016-03-25-1/+4
| | | | | | | | | | | | | | | | | | | | | | Since the MX6UL/SL/SX only has one DDR channel, in CCM_CCDR register the bit[17] for mmdc_ch0 is reserved and its proper state should be 1. When clear this bit, the periph_clk_sel cannot be set and that CDHIPR[periph_clk_sel_busy] handshake never clears. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <van.freenix@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * Merge branch 'next'Stefano Babic2016-03-20-0/+31
| |\
| | * mx7: Distinguish between dual and solo versionsFabio Estevam2016-03-09-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Read the number of cores in the fuses to distinguish between the dual and solo versions. Tested on a mx7d sabresd and on a mx7solo warp7. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
| | * arm: imx: Add support for GE Bx50v3 boardsAkshay Bhat2016-03-09-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for GE B450v3, B650v3 and B850v3 boards. The boards are based on Advantech BA16 module which has a i.MX6D processor. The boards support: - FEC Ethernet - USB Ports - SDHC and MMC boot - SPI NOR - LVDS and HDMI display Basic information about the module: - Module manufacturer: Advantech - CPU: Freescale ARM Cortex-A9 i.MX6D - SPECS: Up to 2GB Onboard DDR3 Memory; Up to 16GB Onboard eMMC NAND Flash Supports OpenGL ES 2.0 and OpenVG 1.1 HDMI, 24-bit LVDS 1x UART, 2x I2C, 8x GPIO, 4x Host USB 2.0 port, 1x USB OTG port, 1x micro SD (SDHC),1x SDIO, 1x SATA II, 1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* | | arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm codeHans de Goede2016-04-11-96/+74
| | | | | | | | | | | | | | | | | | | | | Lets be consistent and also replace v7_maint_dcache_all() with asm code for the invalidate case. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.1 at 2024-11-14 03:32:57 +0000