summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7
Commit message (Collapse)AuthorAgeLines
* armv7: Add missing newline after OMAP die IDLadislav Michl2016-01-20-2/+2
| | | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
* am33xx/am43xx: Add platform data for GPIOsTom Rini2016-01-08-0/+23
| | | | | | | | | | | | | On these platforms we have many cases of boards that enable device model and GPIO support but do not enable OF_CONTROL and pass in a device tree with the binary. We need to bring in the platform data here as well. Tested on Beaglebone Black. Reported-by: Robert Nelson <robertcnelson@gmail.com> Reported-by: Francisco Aguerre <franciscoaguerre@gmail.com> Reported-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-01-03-1/+2
|\
| * imx: ddr: drop duplicated debug infoPeng Fan2016-01-03-1/+0
| | | | | | | | | | | | | | Drop duplicated debug info for tcl. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6: add missing return valueJeroen Hofstee2015-12-07-0/+2
| | | | | | | | | | | | | | cc: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Reviewed-by: Peng Fan <Peng.Fan@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-12-14-0/+99
|\ \
| * | armv7/fsl-ls102xa: Workaround for DDR erratum A008514Yao Yuan2015-12-15-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a workaround for hardware erratum. Write the value of 63b2_0042h to EDDRTQCFG will optimal the memory controller performance. The value: 63b2_0042h comes from the hardware team. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | armv7: ls102xa: cci-400: Enable snoop and DVM message requests.Yao Yuan2015-12-15-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable snoop and DVM message on all CCI-400 slave ports. Setting on disabled feature (snoop or DVM) is ignored by CCI-400. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> [York Sun: Add commit message] Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls102xa: enable all the snoop signal for masters.Yao Yuan2015-12-13-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the IP feature's snoop signal to support hardware snoop for cache coherence. SNPCNFGCR contains the bits to drive snoop signal for various masters. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls1021a: merge SoC specific code in a separate fileYao Yuan2015-12-13-0/+67
| | | | | | | | | | | | | | | | | | | | | Create a soc.c file to put the code for soc special settings. Signed-off-by: Yuan Yao <yao.yuan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls102x: add get_svr and IS_SVR_REV helperShengzhou Liu2015-12-13-0/+8
| | | | | | | | | | | | | | | Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | armv7: omap-common: Rework SPL board_mmc_init()Tom Rini2015-12-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the changes in a1e56cf the way that we had board_mmc_init() structured for OMAP parts (so that we always report device 0) are no longer functional. For now, make the case of booting from the second device initialize both devices (we have no devices that only have the second device as MMC). A further rework and consolidation of the functions should be done at a later date. Tested on Beaglebone Black (SD and eMMC boot). Reported-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | am33xx,ddr3: fix ddr3 sdram configurationEgli, Samuel2015-12-12-1/+10
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the DDR3 initialization procedure in order to comply with DDR3 standard. A 500 us delay is specified between the DDR3 reset and clock enable signal. Until now, this delay was not respected. Some DDR3 chips don't bother but the bigger the RAM becomes the more likely it seems that this delay is needed. We observed that DRAM > 256 MB from the manufacturer Samsung have an issue when the specification is not respected. Changes: 1) Add a 1 ms wait for L3 timeout error trigger 2) Don't delay DDR3 initialization Bit 31 of emif_sdram_ref_ctrl shouldn't be set because his suppresses the initialization of DDR3 Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Reviewed-by: James Doublesin <doublesin@ti.com> Cc: Tom Rini <trini@konsulko.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de>
* | sunxi: Fix H3 DRAM DQ read delay configurationJens Kuske2015-12-10-6/+6
| | | | | | | | | | | | | | | | | | | | | | The read delays were set incorrectly, leading to reliability issues at higher DRAM clock speeds. This commit adjusts this to match the vendor boot0 behaviour. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sun4i: clock: Cleanup some whitespace errorsOlliver Schinagl2015-12-10-3/+3
| | | | | | | | | | | | | | | | Add some spaces around operators. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: twi: Enable clocks on sun7iOlliver Schinagl2015-12-10-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6c739c5d added code to enable i2c bus 4 and 5 on the sun7i SoC but forgot to extend the range check in clock_twi_onoff, resulting in the clock not getting enabled. The range-check is not needed at all, since clock_twi_onoff only gets called with such high indexes when CONFIG_I2C3_ENABLE / CONFIG_I2C4_ENABLE is set and Kconfig already only allows these on sun6i / sun7i. This commit removes the range-check all together fixing i2c bus 4 and 5 not working on sun7i. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> [hdegoede@redhat.com] Remove range check instead of extending it Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add support for Allwinner A83T DRAMvishnupatekar2015-12-10-0/+425
| | | | | | | | | | | | | | | | | | | | | | Add support for A83T dram. Register are different from sun8i A33. init code is similar to A33 dram init. hope we'll shift duplicate code in dram_sun8i_* to dram helper in future. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: clk: add basic clocks for A83Tvishnupatekar2015-12-10-0/+140
| | | | | | | | | | | | | | | | | | | | | | Add basic clocks pll1, pll5, and some default values from allwinner u-boot. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> [hdegoede@redhat.com] Fix PLL6 init to run at 600 MHz instead of 288 MHz, fixing the mmc support not working [hdegoede@redhat.com] Fix PLL init code to properly wait for the PLL-s to stabilize, fixing cold-booting directly from sdcard not working Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: power: enabled support for axp818vishnupatekar2015-12-10-3/+5
| | | | | | | | | | | | | | | | | | Enabled support for AXP818 in SPL and u-boot. DCDC1, DCDC2, DCDC3 and DCSC5 are enabled. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add support for UART0 in PB pin group on A83Tvishnupatekar2015-12-10-0/+4
| | | | | | | | | | | | | | | | | | | | On A83T, PB9,PB10 are UART0 pins. On allwinner A83T Dev board(h8homlet), this uart0 serial connector is exposed. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add Machine Support for A83T SOCvishnupatekar2015-12-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | Allwinner A83T is octa-core cortex-a7 SOC. This enables support for A83T. SMP is not yet supported. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | am33xx: Update serial pdataTom Rini2015-12-06-11/+7
| | | | | | | | | | | | | | | | We now want to make sure that we have the platform data for NS16550 when we do not have OF_CONTROL set. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-12-04-0/+15
|\ \ | |/
| * mx6: clock: Modify GPMI clock to support mx6sxYe.Li2015-11-25-0/+12
| | | | | | | | | | | | | | On mx6sx, the CCM register bits for GPMI are different as other mx6 platforms. Modify the GPMI clock function to support mx6sx. Signed-off-by: Ye.Li <B37916@freescale.com>
| * cgtqmx6eval: Add SPL supportOtavio Salvador2015-11-25-0/+3
| | | | | | | | | | | | | | | | | | Congatec has several MX6 boards based on quad, dual, dual-lite and solo. Add SPL support so that all the variants can be supported Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-11-30-1/+12
|\ \
| * | arm: ls1021a: Ensure Generic Timer disabled before jumping into the OSAlison Wang2015-11-30-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a problem mentioned recently on this mailing list: [1]. In that posting a LS1021 based system was locking up at about 5 minutes after boot,but the problem was mysteriously related to the toolchain used for building u-boot.Debugging the problem reveals a stuck interrupt 29 on the GIC. It appears Freescale's LS1021 support in u-boot erroneously sets the 64-bit ARM generic PL1 physical time CompareValue register to all-ones with a 32-bit value.This causes the timer compare to fire 344 seconds after u-boot configures it.Depending on how fast u-boot gets the kernel booted,this amounts to about 5-minutes of Linux uptime before locking up. Apparently the bug is masked by some toolchains. Perhaps this is explained by default compiler options, word sizes, or binutils versions. To fix the above issue, the generic physical timer is disabled before jumping to the OS. [1] https://lists.yoctoproject.org/pipermail/meta-freescale/2015-June/014400.html Signed-off-by: Chris Kilgour <techie@whiterocker.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | arm: ls1021a: Ensure LS1021 ARM Generic Timer CompareValue Set 64-bitAlison Wang2015-11-30-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a problem mentioned recently on this mailing list: [1]. In that posting a LS1021 based system was locking up at about 5 minutes after boot, but the problem was mysteriously related to the toolchain used for building u-boot. Debugging the problem reveals a stuck interrupt 29 on the GIC. It appears Freescale's LS1021 support in u-boot erroneously sets the 64-bit ARM generic PL1 physical time CompareValue register to all-ones with a 32-bit value. This causes the timer compare to fire 344 seconds after u-boot configures it. Depending on how fast u-boot gets the kernel booted, this amounts to about 5-minutes of Linux uptime before locking up. Apparently the bug is masked by some toolchains. Perhaps this is explained by default compiler options, word sizes, or binutils versions. At any rate this patch makes the manipulation explicitly 64-bit which alleviates the issue. [1] https://lists.yoctoproject.org/pipermail/meta-freescale/2015-June/014400.html Signed-off-by: Chris Kilgour <techie@whiterocker.com> Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | arm: s5pc1xx: move SoC to mach-s5pc1xxMinkyu Kang2015-11-30-444/+0
|/ / | | | | | | | | | | move arm/arm/cpu/armv7/s5pc1xx to arch/arm/mach-s5pc1xx Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | am33xx: Remove serial_init in s_init for QSPI/NOR XIP bootVignesh R2015-11-23-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | serial_init() reads global_data, since global_data is not yet initialized, this can cause unwanted behaviour leading to QSPI XIP boot hang. Also, since serial_init() is anyways called later from boar_init_f(), it does not make sense to do the same in s_init(). Tested on AM437x IDK EVM with QSPI XIP boot. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | sunxi: clock: Set AHB1 clock frequency to 200MHz on Allwinner H3Siarhei Siamashka2015-11-22-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 3.4 kernel from the Allwinner SDK is clocking AHB1 at 200MHz on Allwinner H3 and using PLL6 as the clock source (PLL6/3). This can be verified by reading the value of the AHB1_APB1_CFG_REG register via /dev/mem. It always reads as 0x3180 regardless of the current cpufreq operating point. So this configuration should be safe for use in U-Boot too. PLL6 also needs to be configured before it is used as the clock source, according to the "CCU / Programming Guidelines" section of the Allwinner manual. The current low AHB1 clock speed is limiting the USB transfer speed when booting via FEL. This patch can increase the FEL USB transfer speed from ~510 KB/s to ~950 KB/s. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add H3 DRAM initialization supportJens Kuske2015-11-22-0/+470
| | | | | | | | | | | | | | | | Based on existing A23/A33 code and the original H3 boot0. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | sunxi: Add basic H3 supportJens Kuske2015-11-22-0/+6
|/ | | | | | | | Add initial sun8i H3 support, only uart + mmc are supported for now. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* spl: mmc: add support for BOOT_DEVICE_MMC2Nikita Kiryanov2015-11-18-9/+1
| | | | | | | | | | | Currently the mmc device that SPL looks at is always mmc0, regardless of the BOOT_DEVICE_MMCx value. This forces some boards to implement hacks in order to boot from other mmc devices. Make SPL take into account the correct mmc device. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: change return values of spl_*_load_image()Nikita Kiryanov2015-11-18-1/+3
| | | | | | | | | | | | | | | | | | | | | | | Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* board: ti: beagle_x15: Rename to indicate support for TI am57xx evmsKipisz, Steven2015-11-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* imx: mx6: implement reset_miscPeng Fan2015-11-12-0/+7
| | | | | | | | We need to power down lcdif before uboot reset to make reset can pass stress test. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6: add clock api for lcdifPeng Fan2015-11-12-0/+245
| | | | | | | | | Implement mxs_set_lcdclk, enable_lcdif_clock and enable_pll_video. The three API can be used to configure lcdif related clock when CONFIG_VIDEO_MXS enabled. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* mx7: psci: add basic psci supportPeng Fan2015-11-12-0/+136
| | | | | | | | | | | | 1. add basic psci support for imx7 chip. 2. support cpu_on and cpu_off. 3. switch to non-secure mode when boot linux kernel. 4. set csu allow accessing all peripherial register in non-secure mode. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* Merge git://git.denx.de/u-bootStefano Babic2015-11-12-2/+60
|\
| * s5p: cpu_info: print "cpu-model" if exists in dtsPrzemyslaw Marczak2015-11-02-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CPU name for Exynos was concatenated with cpu id, but for new Exynos platforms, like Chromebook Peach Pi based on Exynos5800, the name of SoC variant does not include the real SoC cpu id (0x5422). For such case, the CPU name should be defined in device tree. This commit introduces new device-tree property for Exynos: - "cpu-model" - with cpu name string If defined, then the cpu id is not printed. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * arm: ls1021a: Add sata support on qds and twr boardtang yuantian2015-10-29-0/+43
| | | | | | | | | | | | | | | | | | | | Freescale ARM-based Layerscape LS102xA contain a SATA controller which comply with the serial ATA 3.0 specification and the AHCI 1.3 specification. This patch adds SATA feature on ls1021aqds and ls1021atwr boards. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * arm: ls102xa: enable snooping for CAAM transactionshoria.geanta@freescale.com2015-10-29-0/+3
| | | | | | | | | | | | | | | | | | | | | | Enable snooping for CAAM read & write transactions by programming the SCFG snoop configuration register: SCFG_SNPCNFGCR[SECRDSNP] SCFG_SNPCNFGCR[SECWRSNP] Signed-off-by: Horia Geantă <horia.geanta@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * ls102xa: fdt: Disable IFC in SD boot for QSPIAlison Wang2015-10-29-1/+1
| | | | | | | | | | | | | | | | | | As QSPI/DSPI and IFC are pin multiplexed, IFC is disabled in SD boot for QSPI. This patch will add fdt support for this rule. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | arm: imx: add secure boot fuse details for imx7 SoCAdrian Alonso2015-10-30-0/+8
| | | | | | | | | | | | | | Add secure boot fuse details (location) bank = 1, word = 3; for imx7 SoC platforms. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* | arm: imx: add secure boot fuse details for imx6 SoCAdrian Alonso2015-10-30-0/+8
| | | | | | | | | | | | | | Add secure boot fuse details (location) bank = 0, word = 6; for imx6 SoC platforms. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* | imx: hab: rework unified rom section for mx7Adrian Alonso2015-10-30-0/+2
| | | | | | | | | | | | | | Rework unified section macro select via Kconfig option instead of macro definition in mx7_common header file. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* | imx: hab: use unified rom section for mx6sx and mx6ulAdrian Alonso2015-10-30-0/+2
| | | | | | | | | | | | | | | | | | Add CONFIG_ROM_UNIFIED_SECTIONS for mx6sx and mx6ul target platforms to resolve corresponding HAB_RVT_BASE base address, the RVT table contains pointers to the HAB API functions in ROM code. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* | imx: hab: rework secure boot support for imx6Adrian Alonso2015-10-30-503/+0
|/ | | | | | | Rework secure boot support for imx6, move existing hab support for imx6 into imx-common for SoC reuse. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* omap-common: Common get_board_serial function to pass serial through ATAGPaul Kocialkowski2015-10-22-0/+18
| | | | | | | | | Since there is a common function to grab the serial number from the die id bits, it makes sense have one to parse that serial number and feed it to the serial ATAG. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-09-18 03:46:15 +0000