summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/omap-common
Commit message (Collapse)AuthorAgeLines
* omap: emif: Set initial DDR PHY config firstTaras Kondratiuk2013-08-15-1/+1
| | | | | | | | | Commit "OMAP5: emif/ddr: Change emif settings as required for ES1.0 silicon" (f40107345cbcd6e0d1747eda45e76c4e2a6df0db) changed sequence to set final DDR PHY config register value at the beginning. Looks like it was made by mistake and should be reverted. Signed-off-by: Taras Kondratiuk <taras@ti.com>
* ARM: AM43xx: Add build supportLokesh Vutla2013-08-15-1/+2
| | | | | | Add AM43xx support in the required places Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: OMAP: Add CONFIG_OMAP_COMMONLokesh Vutla2013-08-15-1/+1
| | | | | | | Adding a new CONFIG_OMAP_COMMON which is included by all boards that needs to build cpu/armv7/omap-common folder. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7xx: Lock DPLL_GMACLokesh Vutla2013-07-26-0/+18
| | | | | | | | | Locking DPLL_GMAC [mugunthanvnm@ti.com:Configure only if CPSW is selected] Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-211/+13
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* ARM: OMAP4+: Fix MA detection during SDRAM_AUTO_DETECTIONLokesh Vutla2013-07-02-0/+3
| | | | | | | | | | | During SDRAM_AUTO_DETECTION MA is not configured. For Soc's > OMAP4460 MA is present. So populating MA for the same. Tested on OMAP4430 PANDA, OMAP4460 PANDA. Reported-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7xx: EMIF: Change settings required for EVM boardSricharan R2013-06-10-3/+23
| | | | | | | | | | | DRA7 EVM board has the below configuration. Adding the settings for the same here. 2Gb_1_35V_DDR3L part * 2 on EMIF1 2Gb_1_35V_DDR3L part * 4 on EMIF2 Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7xx: clocks: Update PLL valuesLokesh Vutla2013-06-10-9/+7
| | | | | | | | | | | Update PLL values. SYS_CLKSEL value for 20MHz is changed to 2. In other platforms SYS_CLKSEL value 2 represents reserved. But in sys_clk array ind 1 is used for 13Mhz. Since other platforms are not using 13Mhz, reusing index 1 for 20MHz. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com>
* ARM: DRA7xx: Correct the SYS_CLK to 20MHZSricharan R2013-06-10-0/+1
| | | | | | | | | | The sys_clk on the dra evm board is 20MHZ. Changing the configuration for the same. And also moving V_SCLK, V_OSCK defines to arch/clock.h for OMAP4+ boards. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: OMAP5: DRA7xx: support class 0 optimized voltagesNishanth Menon2013-06-10-12/+46
| | | | | | | | | | | | | DRA752 now uses AVS Class 0 voltages which are voltages in efuse. This means that we can now use the optimized voltages which are stored as mV values in efuse and program PMIC accordingly. This allows us to go with higher OPP as needed in the system without the need for implementing complex AVS logic. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7xx: clocks: Fixing i2c_init for PMICLokesh Vutla2013-06-10-2/+1
| | | | | | | | In DRA7xx Soc's voltage scaling is done using GPI2C. So i2c_init should happen before scaling. I2C driver uses __udelay which needs timer to be initialized. So moving timer_init just before voltage scaling. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7xx: power Add support for tps659038 PMICLokesh Vutla2013-06-10-0/+23
| | | | | | | | TPS659038 is the power IC used in DRA7XX boards. Adding support for this and also adding pmic data for DRA7XX boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: OMAP4+: pmic: Make generic bus init and write functionsLokesh Vutla2013-06-10-5/+15
| | | | | | | | | | Voltage scaling can be done in two ways: -> Using SR I2C -> Using GP I2C In order to support both, have a function pointer in pmic_data so that we can call as per our requirement. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: OMAP2+: Rename asm/arch/clocks.h asm/arch/clock.hLokesh Vutla2013-06-10-2/+2
| | | | | | | To be consistent with other ARM platforms, renaming asm/arch-omap*/clocks.h to asm/arch-omap*/clock.h Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* OMAP5: add ABB setup for MPU voltage domainAndrii Tseglytskyi2013-06-10-0/+9
| | | | | | | | Patch adds a call of abb_setup() function, and proper registers definitions needed for ABB setup sequence. ABB is initialized for MPU voltage domain. Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
* OMAP3+: introduce generic ABB supportAndrii Tseglytskyi2013-06-10-0/+138
| | | | | | | | | | | | | | | | | Adaptive Body Biasing (ABB) modulates transistor bias voltages dynamically in order to optimize switching speed versus leakage. Adaptive Body-Bias ldos are present for some voltage domains starting with OMAP3630. There are three modes of operation: * Bypass - the default, it just follows the vdd voltage * Foward Body-Bias - applies voltage bias to increase transistor performance at the cost of power. Used to operate safely at high OPPs. * Reverse Body-Bias - applies voltage bias to decrease leakage and save power. Used to save power at lower OPPs. Signed-off-by: Andrii Tseglytskyi <andrii.tseglytskyi@ti.com> Acked-by: Nishanth Menon <nm@ti.com>
* am33xx/omap: Move save_omap_boot_params to omap-common/boot-common.cTom Rini2013-06-05-36/+39
| | | | | | | | | | | We need to call the save_omap_boot_params function on am33xx/ti81xx and other newer TI SoCs, so move the function to boot-common. Only OMAP4+ has the omap_hw_init_context function so add ifdefs to not call it on am33xx/ti81xx. Call save_omap_boot_params from s_init on am33xx/ti81xx boards. Reviewed-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* omap-common/hwinit-common.c: Mark omap_rev_string as staticTom Rini2013-06-04-1/+1
| | | | | | Only called in this file, mark as static. Signed-off-by: Tom Rini <trini@ti.com>
* ARM: OMAP: Add arch_cpu_init functionSRICHARAN R2013-05-10-0/+11
| | | | | | | | | | | | The boot parameters passed from SPL to UBOOT must be saved as a part of uboot's gd data as early as possible, before we will inadvertently overwrite it. So adding a arch_cpu_init for the required Socs to save it. Signed-off-by: Sricharan R <r.sricharan@ti.com> [trini: Add igep0033 hunk] Signed-off-by: Tom Rini <trini@ti.com>
* ARM: OMAP: Cleanup boot parameters usageSRICHARAN R2013-05-10-65/+16
| | | | | | | | | | | The boot parameters are read from individual variables assigned for each of them. This been corrected and now they are stored as a part of the global data 'gd' structure. So read them from 'gd' instead. Signed-off-by: Sricharan R <r.sricharan@ti.com> [trini: Add igep0033 hunk] Signed-off-by: Tom Rini <trini@ti.com>
* ARM: OMAP: Correct save_boot_params and replace with 'C' functionSRICHARAN R2013-05-10-6/+44
| | | | | | | | | | | Currently save_boot_params saves the boot parameters passed from romcode. But this is not stored in a writable location consistently. So the current code would not work for a 'XIP' boot. Change this by saving the boot parameters in 'gd' which is always writable. Also add a 'C' function instead of an assembly code that is more readable. Signed-off-by: Sricharan R <r.sricharan@ti.com>
* ARM: OMAP5: Fix warm reset with USB cable connectedLokesh Vutla2013-05-10-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warm reset on OMAP5 freezes when USB cable is connected. Fix requires PRM_RSTTIME.RSTTIME1 to be programmed with the time for which reset should be held low for the voltages and the oscillator to reach stable state. There are 3 parameters to be considered for calculating the time, which are mostly board and PMIC dependent. -1- Time taken by the Oscillator to shut + restart -2- PMIC OTP times -3- Voltage rail ramp times, which inturn depends on the PMIC slew rate and value of the voltage ramp needed. In order to keep the code in u-boot simple, have a way for boards to specify a pre computed time directly using the 'CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC' option. If boards fail to specify the time, use a default as specified by 'CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC' instead. Using the default value translates into some ~22ms and should work in all cases. However in order to avoid this large delay hiding other bugs, its recommended that all boards look at their respective data sheets and specify a pre computed and optimal value using 'CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC' In order to help future board additions to compute this config option value, add a README at doc/README.omap-reset-time which explains how to compute the value. Also update the toplevel README with the additional option and pointers to doc/README.omap-reset-time. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [rnayak@ti.com: Updated changelog and added the README] Signed-off-by: Rajendra Nayak <rnayak@ti.com>
* arm: omap: emif: Fix DDR3 init after warm resetLokesh Vutla2013-05-10-3/+8
| | | | | | | | | | | | | | | | EMIF supports a global warm reset mode, during which the EMIF keeps the SDRAM content. But if leveling is enabled at the time of warm reset for DDR3, the following steps needs to be done after warm reset: 1) Keep EMIF in self refresh mode. 2) Reset PHY to bring back the PHY to a known state. 3) Start Levelling procedure. Doing the same. And also enabling DLL lock and code output after warm reset. Tested on OMAP5432 ES2.0 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* arm: Make all linker scripts compatible with per-symbol sectionsBenoît Thébaudeau2013-04-12-1/+1
| | | | | | | | Let all ARM linker scripts handle properly -ffunction-sections and -fdata-sections. This will be useful for future changes in order to create symbol-specific sections in common .S files. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* OMAP3/4/5/AM33xx: Correct logic for checking FAT or RAW MMCTom Rini2013-04-08-3/+7
| | | | | | | | | | | | | | | In the case of booting from certain peripherals, such as UART, we must not see what the device descriptor says for RAW or FAT mode because in addition to being nonsensical, it leads to a hang. This is why we have a test currently for the boot mode being within range. The problem however is that on some platforms we get MMC2_2 as the boot mode and not the defined value for MMC2, and in others we get the value for MMC2_2. This is required to fix eMMC booting on omap5_uevm. Tested on am335x_evm (UART, NAND, SD), omap3_beagle (NAND, SD on classic, SD only on xM rev C5) and omap5_uevm (SD, eMMC). Signed-off-by: Tom Rini <trini@ti.com>
* arm: omap4: Fix SDRAM AUTO DETECTIONLokesh Vutla2013-04-08-13/+16
| | | | | | | | | | | | | | Commit "8602114 omap: emif: configure emif only when required" breaks SDRAM_AUTO_DETECTION. The issue is dmm_init() depends on emif_sizes[](SDRAM Auto detection) done in do_sdram_init(). The above commit moves dmm_init() above do_sdram_init() because of which dmm_init() uses uninitialized emif_sizes[]. So instead of using global emif_sizes[], get sdram details locally and calculate emif sizes. Reported-by: Michael Cashwell <mboards@prograde.net> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* OMAP: Fix copy-paste bug that did not enable UART4 clockLubomir Popov2013-04-08-2/+2
| | | | | | | | | | | V2 fixes line wrap issue of the patch itself. UART3 was enabled twice instead of UART4. One more cosmetic change in a comment on EMIF clock. Signed-off-by: Lubomir Popov <lpopov@mm-sol.com> Reviewed-by: R Sricharan <r.sricharan@ti.com>
* ARM: mmu: Set domain permissions to client accessR Sricharan2013-03-28-0/+35
| | | | | | | | | | | | | | | | | The 'XN' execute never bit is set in the pagetables. This will prevent speculative prefetches to non executable regions. But the domain permissions are set as master in the DACR register. So the pagetable attribute for 'XN' is not effective. Change the permissions to client. This fixes lot of speculative prefetch aborts seen on OMAP5 secure devices. Signed-off-by: R Sricharan <r.sricharan@ti.com> Tested-by: Vincent Stehle <v-stehle@ti.com> Cc: Vincent Stehle <v-stehle@ti.com> Cc: Tom Rini <trini@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* ti814x_evm: add ti814x evm board supportMatt Porter2013-03-24-1/+1
| | | | | | | | | | Add TI814X EVM board directory, config file, and MAINTAINERS entry. Enable build. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt to recent omap_hsmmc requirements, Matt re-tested] Signed-off-by: Tom Rini <trini@ti.com>
* am33xx: Add required includes to some omap/am33xx codeTom Rini2013-03-24-0/+2
| | | | | | | | | | | | | - In arch/arm/cpu/armv7/omap-common/timer.c, drivers/mtd/nand/omap_gpmc.c and drivers/net/cpsw.c add #include files that the driver needs but had been relying on <config.h> to bring in. - In arch/arm/cpu/armv7/omap-common/lowlevel_init.S add <config.h> - In am335x_evm.h and pcm051.h don't globally include <asm/arch/hardware.h> and <asm/arch/cpu.h> but just <asm/arch/omap.h> as that is the only include which defines things the config uses. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-03-18-153/+277
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Albert's rework of the linker scripts conflicted with Simon's making everyone use __bss_end. We also had a minor conflict over README.scrapyard being added to in mainline and enhanced in u-boot-arm/master with proper formatting. Conflicts: arch/arm/cpu/ixp/u-boot.lds arch/arm/cpu/u-boot.lds arch/arm/lib/Makefile board/actux1/u-boot.lds board/actux2/u-boot.lds board/actux3/u-boot.lds board/dvlhost/u-boot.lds board/freescale/mx31ads/u-boot.lds doc/README.scrapyard include/configs/tegra-common.h Build tested for all of ARM and run-time tested on am335x_evm. Signed-off-by: Tom Rini <trini@ti.com>
| * Remove linker lists (LGAs) from SPL linker scriptsAlbert ARIBAUD2013-03-12-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Many SPL linker scripts needlessly include linker lists (aka LGAs). Remove them whenever possible; keep it only in the seven am335x_evm variants (am335x_evm, am335x_evm_uart[1-5], am335x_evm_spiboot), where there is actual content in output section .u_boot_list. This commit keeps all u-boot.bin and u-boot-spl.bin in ARM targets byte-identical. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * arm: omap: map u_boot_lists section to .sramAlbert ARIBAUD2013-03-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Output section .u_boot_list was left unmapped in u-boot-spl.lds for omap-common, causing the location counter to roll back to bteween .rodata and .data, making __image_copy_end and _end symbols wrong. Mapping output section .u_boot_list to memory .sram fixes these symbols' mapping. This modifies the SPL binary but has no functional impact, as __image_copy_end and _end are never used in SPLs and u_boot_list is empty for all 29 boards affected (omap4_sdp4430 eco5pk igep0030 am335x_evm_uart3 omap3_beagle am3517_crane igep0032 mt_ventoux pcm051 am3517_evm omap3_evm_quick_mmc am335x_evm_uart2 am335x_evm_spiboot am335x_evm_uart1 omap3_evm igep0030_nand omap3_overo igep0020 am335x_evm omap4_panda omap5_evm am335x_evm_uart4 devkit8000 tricorder mcx twister omap3_evm_quick_nand am335x_evm_uart5 igep0020_nand). Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * arm: dra7xx: Add silicon id support for DRA752 socLokesh Vutla2013-03-11-2/+7
| | | | | | | | | | | | | | | | Adding CPU detection support for the DRA752 ES1.0 soc. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * arm: dra7xx: Add DDR related data for DRA752 ES1.0Lokesh Vutla2013-03-11-1/+1
| | | | | | | | | | | | | | | | | | | | DRA752 uses DDR3. Populating the corresponding structures with DDR3 data. Writing into MA registers if only MA is present in that soc. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * arm: dra7xx: clock: Add the dplls dataLokesh Vutla2013-03-11-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | A new DPLL DDR is added in DRA7XX socs. Now clocks to EMIF CD is from DPLL DDR. So DPLL DDR should be locked before initializing RAM. Also adding other dpll data which are different from OMAP5 ES2.0. SYS_CLK running at 20MHz is introduced in DRA7xx socs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ARM: OMAP5: srcomp: enable slew rate compensation cells after powerupLokesh Vutla2013-03-11-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | After power-up SRCOMP cells are by-passed by default in OMAP5. Software has to enable these SRCOMP sells. For ES2: All 5 SRCOMP cells needs to be enabled. For ES1: Only 4 SRCOMP cells in core power domain are enabled. The 1 in wkup domain is not enabled because smart i/os of wkup domain work with default compensation code. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com> Cc: Tom Rini <trini@ti.com>
| * ARM: OMAP4/5: clocks: Add the required OPP settings as per the latest addendumSRICHARAN R2013-03-11-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change OPP settings as per the latest 0.5 version of addendum for OMAP5430 ES2.0. omap4/hw_data.c is touched here to add dummy dividers. While here correcting OPP_NOM mpu, core frequency for OMAP4430 ES2.x Note that OMAP5430 ES1.0 support is still kept alive and would be removed in a cleanup later. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Cc: Tom Rini <trini@ti.com> Cc: Nishanth Menon <nm@ti.com>
| * ARM: OMAP4+: Make control module register structure genericLokesh Vutla2013-03-11-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | A seperate omap_sys_ctrl_regs structure is defined for omap4 & 5. If there is any change in control module for any of the ES versions, a new structure needs to be created. In order to remove this dependency, making the register structure generic for all the omap4+ boards. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ARM: OMAP4+: Cleanup emif specific filesLokesh Vutla2013-03-11-37/+9
| | | | | | | | | | | | | | | | | | | | | | | | Removing the duplicated code in ddr3 initialization. Also creating structure for lpddr2 mode registers to avoid unnessecary revision checks. These change reduces code addition for future Socs. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ARM: OMAP4+: Clean up the pmic codeSRICHARAN R2013-03-11-26/+57
| | | | | | | | | | | | | | | | | | | | The pmic code is duplicated for OMAP 4 and 5. Instead move the data to Soc specific place and share the code. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ARM: OMAP4+: Cleanup the clocks layerSRICHARAN R2013-03-11-8/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is quite a lot of code which is duplicated in the clocks code for OMAP 4 and 5 Socs. Avoiding this here by moving the clocks data to a SOC specific place and the sharing the common code. This helps in addition of a new Soc with minimal changes. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * ARM: OMAP4+: Change the PRCM structure prototype common for all SocsSRICHARAN R2013-03-11-60/+64
| | | | | | | | | | | | | | | | | | | | | | | | The current PRCM structure prototype directly matches the hardware register layout. So there is a need to change this for every new silicon revision which has register space changes. Avoiding this by making the prototye generic and populating the register addresses seperately for all Socs. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * ARM: OMAP4+: emif: Detect SDRAM from SDRAM config registerLokesh Vutla2013-03-11-5/+19
| | | | | | | | | | | | | | | | | | | | | | Now SDRAM initialization is done on the basis of omap revision. Instead this should be done on basis of SDRAM type read from EMIF_SDRAM_CONFIG register. This will be helpful to avoid unnessecary cpu checks for new boards Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
| * omap_hsmmc: add driver check for write protectionNikita Kiryanov2013-03-08-2/+2
| | | | | | | | | | | | | | | | Add check for write protection in omap mmc driver. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@ti.com>
| * omap_hsmmc: implement driver check for card detectionNikita Kiryanov2013-03-08-2/+2
| | | | | | | | | | | | | | Implement driver check for card detection. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * am33xx: support for booting via usbethIlya Yanok2013-02-18-0/+3
| | | | | | | | | | | | | | | | This patch adds BOOT_DEVICE define for USB booting and fixes spl_board_init function to call arch_misc_init (this is the place there musb is initialized). Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* | Replace __bss_end__ with __bss_endSimon Glass2013-03-15-1/+1
|/ | | | | | | | | | | | | Note this is a tree-wide change affecting multiple architectures. At present we use __bss_start, but mostly __bss_end__. This seems inconsistent and in a number of places __bss_end is used instead. Change to use __bss_end for the BSS end symbol throughout U-Boot. This makes it possible to use the asm-generic/sections.h file on all archs. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Move lastinc to arch_global_dataSimon Glass2013-02-01-5/+6
| | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: Move tbl to arch_global_dataSimon Glass2013-02-01-7/+8
| | | | | | Move this field into arch_global_data and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-07 04:37:31 +0000