summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/mx6
Commit message (Collapse)AuthorAgeLines
* arm: mx6: introduce disable_sata_clockNikita Kiryanov2014-11-24-0/+8
| | | | | | | Implement disable_sata_clock for mx6 SoCs. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de>
* mx6: thermal: Check cpu temperature via thermal sensorYe.Li2014-11-21-0/+15
| | | | | | | | Add imx6 thermal device to mx6 soc file. Read the cpu temperature using this device to access onchip thermal sensor. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* mx6: clock: Add thermal clock enable functionNitin Garg2014-11-21-0/+30
| | | | | | | | Add api to check and enable pll3 as required for thermal sensor driver. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* arm: imx: make bmode command work with SPL/U-Boot comboNikita Kiryanov2014-11-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The bmode command forces the SoC to use a specific boot device by writing its boot mode into SRC_GPR9, and notifying the SoC of the change using SRC_GPR10[28] bit: if the bit is on, bootROM uses the value in SRC_GPR9 instead of SRC_SMBR1 to determine the boot device. SPL on the other hand is oblivious to this distinction, so once the bootROM loads SPL from the device configured in SRC_GPR10, SPL will attempt to load U-Boot from the device configured in SRC_SMBR1, which is not updated by the bootROM to the value in SRC_GPR9. The result is that the selected boot device is not used across all the boot stages. Update spl_boot_device() to look at gpr9 when necessary. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2014-11-05-0/+21
|\
| * imx: mx6sl: Set the preclk clock source to OSC 24MhzYe.Li2014-11-03-0/+17
| | | | | | | | | | | | | | For MX6SL, uses the OSC 24Mhz as the preclk source in CCM. Align the preclk setting with kernel. Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: mx6: Change the get_ipg_per_clk for OSC 24Mhz sourceYe.Li2014-11-03-0/+4
| | | | | | | | | | | | | | For MX6SL and MX6SX, the perclk can come from OSC 24Mhz source. Fix the get_ipg_per_clk function to support it. Signed-off-by: Ye.Li <B37916@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini2014-10-27-0/+1
|\ \ | |/
| * ARM: i.MX6: include prototype for get_board_rev()Eric Nelson2014-10-21-0/+1
| | | | | | | | | | | | | | Include <asm/bootm.h> to see the prototype for get_board_rev() and prevent warning "Should it be static?" with "make C=1". Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* | imx: add missing includesJeroen Hofstee2014-10-25-0/+1
|/ | | | Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD2014-10-08-9/+226
|\ | | | | | | | | | | | | The single file conflict below is actually trivial. Conflicts: board/boundary/nitrogen6x/nitrogen6x.c
| * imx: mx6: Checking PLL2 PFD0 and PFD2 for periph_clk before PFD resetYe.Li2014-09-29-8/+16
| | | | | | | | | | | | | | | | | | Checking the pre_periph_clk_sel and pre_periph2_clk of CCM CBCMR register, if the PLL2 PFD0 or PLL2 PFD2 is used for the clock source, do not reset this PFD to avoid system hang. Customers may set this in DDR script or use BT_FREQ to select low freq boot. Signed-off-by: Ye.Li <B37916@freescale.com>
| * imx: Support i.MX6 High Assurance Boot authenticationNitin Garg2014-09-22-1/+210
| | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_SECURE_BOOT is enabled, the signed images like kernel and dtb can be authenticated using iMX6 CAAM. The added command hab_auth_img can be used for HAB authentication of images. The command takes the image DDR location, IVT (Image Vector Table) offset inside image as parameters. Detailed info about signing images can be found in Freescale AppNote AN4581. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* | cosmetic: replace MIN, MAX with min, maxMasahiro Yamada2014-09-24-20/+20
|/ | | | | | | The macro MIN, MAX is defined as the aliase of min, max, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* imx: Fix build of mx6sxsabresdStefano Babic2014-09-11-1/+1
| | | | | | | | | | Commit 224beb833e544b802f08765271cec07667d39669 add clock enabling function for FEC, but the masks are not available for SX processor and the mx6sxsabresd cannot be built clean. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Nikita Kiryanov <nikita@compulab.co.il>
* pcie_imx: Add mx6solox supportFabio Estevam2014-09-09-4/+13
| | | | | | | Let PCI on mx6solox also be supported. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
* mx6: Fix ECSPI typo in soc_boot_modesNikolay Dimitrov2014-09-09-4/+4
| | | | | | Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* iMX6: Disable the L2 before chaning the PL310 latencyYe.Li2014-09-09-0/+3
| | | | | | | | | | | The Latency parameters of PL310 Tag RAM latency control register and Data RAM Latency control register are set in L2 cache enable. And setting these registers must have PL310 NOT enabled. But when using Plugin mode boot, the PL310 is enabled by bootrom. The patch disables the PL310 before applying this setting. Signed-off-by: Ye.Li <Ye.Li@freescale.com>
* arm: mx6: ddr: fix cs0_end calculationNikita Kiryanov2014-09-09-3/+1
| | | | | | | | | | | | | | | | Current way of calculation CS0_END field for MMDCx_MDASP register is problematic because in most cases the user is forced to define cs_density in an unnatural way: as value - 2, instead of value. This breaks the abstraction provided by struct mx6_ddr_sysinfo because the user is forced to be aware of the way the calculation is performed. Refactor the calculation. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* arm: mx6: ddr: configure MMDC for slow_pdNikita Kiryanov2014-09-09-0/+1
| | | | | | | | | | | | | | | | According to MX6 TRM, both MMDC and DRAM should be configured to the same powerdown precharge. Currently, mx6_dram_cfg() configures MMDC for fast pd (MDPDC[7] = 0), and the DRAM for 'slow exit (DLL off)' (MR0[12] = 0). Configure MMDC for slow pd. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Tim Harvey <tharvey@gateworks.com>
* arm: mx6: ddr: do not write into reserved bitNikita Kiryanov2014-09-09-1/+1
| | | | | | | | | Bit 16 in mapsr register is in a reserved field. Don't write to it. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* arm: mx6: ddr: cleanupNikita Kiryanov2014-09-09-141/+137
| | | | | | | | | No functional changes. Cc: Stefano Babic <sbabic@denx.de> Cc: Tim Harvey <tharvey@gateworks.com> Acked-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* mx6: add clock enabling functionsNikita Kiryanov2014-09-09-0/+90
| | | | | | | | | Add functions to enable/disable clocks for UART, SPI, ENET, and MMC. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
* mx6sx: Adjust enable_fec_anatop_clock() for mx6soloxFabio Estevam2014-08-20-0/+21
| | | | | | Configure and enable the ethernet clock for mx6solox. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* ARM: mx6: Handle the MMDCx_MDCTL COL field capricesMarek Vasut2014-08-20-1/+7
| | | | | | | | | The COL field value cannot be easily calculated from the desired column number. Instead, there are special cases for that, see the datasheet, MMDCx_MDCTL field description, field COL . Cater for those special cases. Signed-off-by: Marek Vasut <marex@denx.de>
* mx6: add support of multi-processor commandGabriel Huau2014-08-20-0/+94
| | | | | | | | | This allows u-boot to load different OS or Bare Metal application on different cores of the i.MX6 SoC. For example: running Android on cpu0 and a RT OS like QNX/FreeRTOS on cpu1. Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Stefano Babic <sbabic@denx.de>
* i.MX6: add enable_spi_clk()Heiko Schocher2014-07-23-0/+18
| | | | | | | | | add enable_spi_clk(), so board code can enable spi clocks. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de>
* mx6: soc: Do not apply the PFD erratum for mx6soloxFabio Estevam2014-07-23-0/+4
| | | | | | The PFD issue is not present on mx6solox, so skip it in this case. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: clock: Do not enable sata and ipu clocksFabio Estevam2014-07-10-0/+8
| | | | | | mx6sx does not have sata nor ipu blocks, so do not handle such clocks. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: Add support for the mx6solox variantFabio Estevam2014-07-10-2/+28
| | | | | | | | | | | | mx6solox is the newest member of the mx6 family. Some of the new features on this variants are: - Cortex M4 microcontroller (besides the CortexA9) - Dual Gigabit Ethernet Add the initial support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: soc: Update the comments of set_ldo_voltage()Fabio Estevam2014-07-09-3/+2
| | | | | | | | | | | | | Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces set_ldo_voltage() function that can be used to set the voltages of any of the three LDO regulators controlled by the PMU_REG_CORE register. Prior to this commit there was a single set_vddsoc() which only configured the VDDSOC regulator. Update the comments to align with the new set_ldo_voltage() implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX6: Correct calculation of PLL_SYSAndre Renaud2014-07-09-1/+1
| | | | | | | DIV_SELECT is used as Fout = Fin * div_select / 2.0, so we should do the shift after the multiply to avoid rounding errors Signed-off-by: Andre Renaud <andre@bluewatersys.com>
* imx: correct HAB status for new chip TOStefano Babic2014-06-17-7/+66
| | | | | | | | | | | | | | | | | | | | According to: http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/log/?h=imx_v2009.08_3.0.35_4.1.0 ENGR00287268 mx6: fix the secure boot issue on the new tapout chip commit 424cb1a79e9f5ae4ede9350dfb5e10dc9680e90b newer i.MX6 silicon revisions have an updated ROM and HAB API table. Please see also: i.MX Applications Processors Documentation Engineering Bulletins EB803, i.MX 6Dual/6Quad Applications Processor Silicon Revsion 1.2 to 1.3 Comparison With this change the secure boot status is correctly displayed Signed-off-by: Stefano Babic <sbabic@denx.de>
* mx6: add mmdc configuration for MX6Q/MX6DLTim Harvey2014-06-06-0/+491
| | | | | | | | | | | | | | | - add function for configuring iomux based on board-specific regs - add function for configuring mmdc based on board-specific and chip-specific data Cc: Stefan Roese <sr@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Andy Ng <andreas2025@gmail.com> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Tom Rini <trini@ti.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* ARM: imx6: fix wrong fec clkMarkus Niebel2014-02-11-1/+1
| | | | | | | | | | imx_get_fecclk() returns enet_ref instead of ipg. Since the clock is used to calculate the prescaler for the MDIO interface wrong values can be calculated. Tested on a custom MX6S board with 100MBit interface Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
* mx6: Enable L2 cache supportFabio Estevam2014-02-11-0/+58
| | | | | | | | | | | Add L2 cache support and enable it by default. Configure the L2 cache in the same way as done by FSL kernel: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/mach-mx6/mm.c?h=imx_3.0.35_4.1.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6: Distinguish mx6dual from mx6quadFabio Estevam2014-02-11-3/+11
| | | | | | | | | | | | Currently when we boot a mx6dual U-boot reports that it is a mx6quad. Report it as MX6D instead: CPU: Freescale i.MX6D rev1.2 at 792 MHz Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
* imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failureAnson Huang2014-02-11-0/+11
| | | | | | | | | Boot ROM may mask MMDC_CHx_MASK in CCM_CCDR(such as i.MX6SL TO1.2), it will cause warm reset fail, need to clear this MMDC_CHx_MASK field to make sure all the i.MX6 series SOCs reset function work. Otherwise, uboot "reset" command will fail, tested on i.MX6SL EVK board with TO1.2. Signed-off-by: Anson Huang <b20788@freescale.com>
* imx6: ensure AHB clock is 132MHz in low freq boot modeAnson Huang2014-02-11-0/+20
| | | | | | | | | | | | For low freq boot mode(ARM boot up with 396MHz), ROM will not set AHB clock to 132MHz, and the reset value of AHB divider is incorrect which will lead to wrong AHB rate, need to correct it. To enable low freq boot mode, need to set BOOT_CFG2[2] to high, tested on i.MX6Q/DL SabreSD board and i.MX6SL EVK board. Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Anson Huang <b20788@freescale.com>
* ARM: mx6: Add PCI express clock configurationMarek Vasut2014-01-26-10/+65
| | | | | | | | | | | | | | | | Split the SATA clock enabling function and add PCI express clock enabling function. The SATA clock enabling function starts up the 100MHz SATA reference PLL in ENET_PLL register, but the code can be re-used to enable the 125MHz PCIe reference in ENET_PLL, so pull this code into separate function. Moreover, add the PCIe clock enabling code. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Eric Nelson <eric.nelson@boundarydevices.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
* mx6: Revert "mx6: soc: Disable VDDPU regulator"Fabio Estevam2014-01-17-41/+0
| | | | | | | | | Commit 022298278 (mx6: soc: Disable VDDPU regulator) is causing kernel hang for people using FSL kernel 3.0.35 and 3.10, so revert it for now. Reported-by: Otavio Salvador <otavio@ossystems.com.br> Reported-by: Pierre Aubert <p.aubert@staubli.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: clock: Pass the frequency as argument of enable_fec_anatop_clock()Fabio Estevam2014-01-15-1/+7
| | | | | | | | | | Provide an argument to enable_fec_anatop_clock() to specify the clock frequency that will be generated. No changes are made to mx6slevk, which uses the default 50MHz fec clock. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* imx6: make use of lldiv(..)Christian Gmeiner2014-01-13-1/+2
| | | | | | | | | | Commit 762a88ccf8540948fbf8c31b40a29d1e0684a25b introduces a 64-bit division without using the lldiv() function, which pulls in previously unused libgcc stuff. Signed-off-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Acked-by: Stefano Babic <sbabic@denx.de>
* ARM: mx6: Allow enablement of FEC Anatop based clock for all MX6Otavio Salvador2014-01-03-10/+11
| | | | | | | | | | The enable_fec_anatop_clock method should be available for all MX6 variant as it is not MX6 SoloLite specific. This moves the code out of the #ifdef/#endif and we make it conditional to CONFIG_FEC_MXC instead. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* mx6: soc: Disable VDDPU regulatorFabio Estevam2014-01-02-0/+41
| | | | | | | | | As U-boot does not use GPU/VPU peripherals, shutdown the VDDPU regulator in order to save power. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: soc: Add the required LDO ramp up delayFabio Estevam2014-01-02-3/+19
| | | | | | | | | | When changing LDO voltages we need to wait for the required amount of time for the voltage to settle. Also, as the timer is still not available when arch_cpu_init() is called, we need to call it later at board_postclk_init() phase. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: soc: Introduce set_ldo_voltage()Fabio Estevam2014-01-02-7/+26
| | | | | | Introduce set_ldo_voltage() so that all three LDO regulators can be configured. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: soc: Set the VDDSOC at 1.175 VFabio Estevam2014-01-02-1/+1
| | | | | | | | | | mx6 datasheet specifies that the minimum VDDSOC at 792 MHz is 1.15 V. Add a 25 mV margin and set it to 1.175V. This also matches the VDDSOC voltages for 792MHz operation that the kernel configures: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/mach-mx6/cpu_op-mx6.c?h=imx_3.0.35_4.1.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: soc: Clear the LDO ramp values up prior to setting the LDO voltagesFabio Estevam2014-01-02-0/+16
| | | | | | | | | | | | | | Since ROM may modify the LDO ramp up time according to fuse setting, it is safer to reset the ramp up field to its default value of 00: 00: 64 cycles of 24MHz clock; 01: 128 cycles of 24MHz clock; 02: 256 cycles of 24MHz clock; 03: 512 cycles of 24MHz clock; Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6: soc: Staticize set_vddsoc()Fabio Estevam2014-01-02-1/+1
| | | | | | set_vddsoc() is not used anywhere else, so make it static. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-11-19 03:20:25 +0000