| Commit message (Collapse) | Author | Age | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
Add the fuse checking in drivers, when the module is disabled in fuse,
the driver will not work.
Changed drivers: BEE, GPMI, APBH-DMA, ESDHC, FEC, QSPI, ECSPI, I2C,
USB-EHCI, GIS, LCDIF.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 1704e116f9b39aeb99201919a18bc2b1e19a980e)
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Need to check fuse bit 25 of bank 0 word 4 before initialize bee.
The bit: 0 means bee enabled, 1 means bee disabled.
If disabled, continuing initialize bee will cause system hang, so
need to check this bit before initialize bee.
Add macro to enable BEE in header file, default disabled.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit ef4cb7c53418e4e1dd7cfcb7c6974cfea77ef3c0)
|
|
|
This patch is to support Bus Encryption Engine(BEE) for i.MX 6UL.
Supported feature:
1. SNVS key and soft key
2. CTR and ECB mode
3. Specify address region to bee.
Two commands are included:
bee init [key] [mode] [start] [end] - BEE block initial
"Example: bee init 1 1 0x80000000 0x80010000\n"
bee test [region]
"Example: bee test 1\n"
Mapping:
[0x10000000 - (0x10000000 + size - 1)] : [start - (start + size - 1)]
[0x30000000 - (0x30000000 + IRAM_SIZE - 1)] : [IRAM_BASE_ADDR -
(IRAM_BASE_ADDR + IRAM_SIZE - 1)]
Whatever start is, start - (start + size -1) will be fixed mapping to
0x10000000 - (0x10000000 + size - 1)
Since default AES region's protected size is SZ_512M, so
on mx6ul evk board, you can not simply run 'bee init', it will
overlap with uboot execution environment, you can use
'bee init 0 0 0x80000000 0x81000000'.
If want to use bee, Need to define CONFIG_CMD_BEE in board configuration
header file, since CONFIG_CMD_BEE default is not enabled.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
(cherry picked from commit 29b9bdbbdac9678dba9b7bc2d3662598e9c548a5)
(cherry picked from commit 6d45292ff7e7020a48842f033f8a337daabe4476)
|
