summaryrefslogtreecommitdiff
path: root/README
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2012-11-26-6/+39
|\
| * README: Reference nand monitor commands in U-Boot READMEKarl O. Pinc2012-11-26-0/+1
| | | | | | | | | | | | Reference nand monitor commands in U-Boot README Signed-off-by: Karl O. Pinc <kop@meme.com>
| * spl/nand: config symbol documentationScott Wood2012-11-26-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | Document parameters used for specifying the NAND image to be loaded. Also fix the definition of CONFIG_SPL_NAND_SIMPLE -- it's only nand_spl_simple.c, not the entire nand directory. The word "simple" is there for a reason. :-) Signed-off-by: Scott Wood <scottwood@freescale.com> --- v2: updated for makefile changes earlier in patchset
| * spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC.Scott Wood2012-11-26-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some small SPLs do not use nand_base.c, and a subset of those also require a special driver. Some SPLs need software ECC but others can't fit it. All existing boards that specify CONFIG_SPL_NAND_SUPPORT have these symbols added to preserve existing behavior. Signed-off-by: Scott Wood <scottwood@freescale.com> -- v2: use positive logic for including bits of NAND, rather than a MINIMAL symbol that excludes things.
| * powerpc/mpc85xx/p1_p2_rdb_pc: new SPL supportScott Wood2012-11-26-0/+9
| | | | | | | | | | | | | | Introduces CONFIG_SPL_RELOC_TEXT_BASE and CONFIG_SPL_RELOC_STACK. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
| * spl/powerpc: introduce CONFIG_SPL_INIT_MINIMALScott Wood2012-11-26-0/+3
| | | | | | | | | | | | | | | | | | cpu_init_nand.c is renamed to spl_minimal.c as it is not really NAND-specific. Signed-off-by: Scott Wood <scottwood@freescale.com> --- v2: factor out START, and change cpu_init_nand.c to spl_minimal.c Cc: Andy Fleming <afleming@freescale.com>
| * spl: introduce CONFIG_SPL_TARGETScott Wood2012-11-26-0/+5
| | | | | | | | | | | | | | | | | | | | | | Currently the SPL target is specified in a CPU-specific makefile fragment. While some targets may need something more complicated than a simple target name, targets which don't need this shouldn't have to provide a makefile fragment just for this. Signed-off-by: Scott Wood <scottwood@freescale.com> --- v2: Removed default target as it's been pointed out to me how existing platforms cause the SPL to be built.
* | Merge branch 'next'Gerald Van Baren2012-11-19-0/+11
|\ \ | |/ |/|
| * fdt: Add option to default to most compatible conf in a fit imageGabe Black2012-11-12-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When booting a fit image with multiple configurations, the user either has to specify which configuration to use explicitly, or there has to be a default defined which is chosen automatically. This change adds an option to change that behavior so that a configuration can be selected explicitly, or the configuration which has the device tree that claims to be compatible with the earliest item in U-Boot's device tree. In other words, if U-Boot claimed to be compatible with A, B, and then C, and the configurations claimed to be compatible with A, D and B, D and D, E, the first configuration, A, D, would be chosen. Both the first and second configurations match, but the first one matches a more specific entry in U-Boot's device tree. The order in the kernel's device tree is ignored. Signed-off-by: Gabe Black <gabeblack@google.com> Commit-Ready: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | lcd: Implement RLE8 bitmap decodingTom Wai-Hong Tam2012-11-07-0/+5
|/ | | | | | | | | | | | | Add support for drawing compressed RLE8 bitmaps. Reference: http://www.digicamsoft.com/bmp/bmp.html Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Che-Liang Chiou <clchiou@chromium.org> [agust: fix some minor style issues and build warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-11-05-0/+4
|\
| * Merge remote-tracking branch 'u-boot-ti/master'Albert ARIBAUD2012-11-03-0/+4
| |\
| | * cfb_console: Add support for some ANSI terminal escape codesPali Rohár2012-10-30-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add optional support for some ANSI escape sequences to the cfb_console driver. Define CONFIG_CFB_CONSOLE_ANSI to enable cursor moving, color reverting and clearing the cfb console via ANSI escape codes. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | scsi: Add function and env var to report number of scsi drivesStefan Reinauer2012-11-02-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Add a new function to find out the number of available SCSI disks. Also set the 'scsidevs' environment variable after each scan. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | | README: Document CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIGTom Rini2012-11-02-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option is intended to be set by boards which will set the board_name and board_rev environment variables. These are to be used when the U-Boot binary can support more than one board type at run-time and the user needs an easy way (for example for scripting to determine what device tree to load) to determine what board they are on. Signed-off-by: Tom Rini <trini@ti.com>
* | | fs: separate CONFIG_FS_{FAT, EXT4} from CONFIG_CMD_{FAT, EXT*}Stephen Warren2012-10-29-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the FAT and ext4 filesystem implementations build if CONFIG_FS_{FAT,EXT4} are defined, rather than basing the build on whether CONFIG_CMD_{FAT,EXT*} are defined. This will allow the filesystems to be built separately from the filesystem-specific commands that use them. This paves the way for the creation of filesystem-generic commands that used the filesystems, without requiring the filesystem- specific commands. Minor documentation changes are made for this change. The new config options are automatically selected by the old config options to retain backwards-compatibility. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* | | PPC: remove dead boards (AMX860, c2mon, ETX094, IAD210, LANTEC, SCM)Wolfgang Denk2012-10-28-2/+2
|/ / | | | | | | | | | | | | | | | | These boards have long reached EOL, and there has been no indication of any active users of such hardware for years. Get rid of the dead weight. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Wolfgang Grandegger <wg@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxTom Rini2012-10-22-0/+6
|\ \
| * | powerpc/mpc85xx: Rewrite spin table to comply with ePAPR v1.1York Sun2012-10-22-0/+6
| |/ | | | | | | | | | | | | | | | | | | | | | | Move spin table to cached memory to comply with ePAPR v1.1. Load R3 with 64-bit value if CONFIG_SYS_PPC64 is defined. 'M' bit is set for DDR TLB to maintain cache coherence. See details in doc/README.mpc85xx-spin-table. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | README : Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111, ↵Ashok2012-10-22-2/+2
| | | | | | | | | | | | | | | | | | | | CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 Rename CONFIG_DRIVER_SMC91111 to CONFIG_SMC91111, CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com> Reviewed-by: Tom Rini <trini@ti.com>
* | fs: Add a Coreboot Filesystem (CBFS) driver and commandsGabe Black2012-10-22-0/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds CBFS support and some commands to use it to u-boot. These commands are: cbfsinit - Initialize CBFS support and pull all metadata into RAM. The end of the ROM is an optional parameter which defaults to the standard 0xffffffff and can be used to support multiple CBFSes in a system. The last one set up with cbfsinit is the one that will be used. cbfsinfo - Print information from the CBFS header. cbfsls - Print out the size, type, and name of all the files in the current CBFS. Recognized types are translated into symbolic names. cbfsload - Load a file from CBFS into memory. Like the similar command for fat filesystems, you can optionally provide a maximum size. Support for CBFS is compiled in when the CONFIG_CMD_CBFS option is specified. The CBFS driver can also be used programmatically from within u-boot. If u-boot needs something out of CBFS very early before the heap is configured, it won't be able to use the normal CBFS support which caches some information in memory it allocates from the heap. The cbfs_file_find_uncached function searches a CBFS instance without touching the heap. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'agust@denx.de-next' of git://git.denx.de/u-boot-stagingTom Rini2012-10-15-0/+25
|\
| * bootstage: Add bootstage commandSimon Glass2012-10-03-0/+4
| | | | | | | | | | | | | | | | | | Now that there are a few features, add a bootstage command to access them. bootstage report - prints a report bootstage stash/unstash - stashes bootstage records in memory, reads them back Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Store boot timings in device treeSimon Glass2012-10-02-0/+21
| | | | | | | | | | | | | | | | Add an option, CONFIG_BOOTSTAGE_FDT to pass boot timings to the kernel in the device tree, if available. To use this, you must have CONFIG_OF_LIBFDT defined. Signed-off-by: Simon Glass <sjg@chromium.org>
* | tegra20: add USB ULPI init codeLucas Stach2012-10-15-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds the required code to set up a ULPI USB port. It is mostly a port of the Linux ULPI setup code with some tweaks added for more correctness, discovered along the way of debugging this. To use this both CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT have to be set in the board configuration file. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | Add a command to access the system timerJoe Hershberger2012-10-03-1/+2
| | | | | | | | | | | | | | | | | | | | Two sub-commands... start and get. * start sets the reference. * get prints out the time since the last start (in "<sec>.<msec>" format). If get is called without start, returns time since boot. Simple way to benchmark an operation: "timer start;<commands-to-measure>;timer get" Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | Add a new "ini" commandJoe Hershberger2012-10-03-0/+1
| | | | | | | | | | | | | | | | | | This allows you to read ini-formatted data from anywhere and then import one of the sections into the environment This is based on rev 16 at http://code.google.com/p/inih/ Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | Allow runtime configuration of "zero-delay" checkJoe Hershberger2012-10-03-0/+2
| | | | | | | | | | | | | | Define the new "-2" value for bootdelay to mean autoboot with no delay and don't check for an abort key (while "0" value means do check). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* | README: Add handy kermit primerKarl O. Pinc2012-10-02-1/+4
|/ | | | Signed-off-by: Karl O. Pinc <kop@meme.com>
* common: add zip command supportLei Wen2012-09-29-0/+6
| | | | Signed-off-by: Lei Wen <leiwen@marvell.com>
* SPL: Add support for loading image from ram in SPL.Pavel Machek2012-09-27-0/+3
| | | | | Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* SPL: Move the omap SPL framework to common/splTom Rini2012-09-27-0/+5
| | | | | | | | | | | | | Add a new flag, CONFIG_SPL_FRAMEWORK to opt into the common/spl SPL framework, enable on all of the previously using boards. We move the spl_ymodem.c portion to common/ and spl_mmc.c to drivers/mmc/. We leave the NAND one in-place as we plan to replace it later in this series. We use common/spl to avoid linker problems with respect to merging constant strings in objects. Otherwise all strings in common/ will be linked in and kept which grows SPL in size too much. Signed-off-by: Tom Rini <trini@ti.com>
* omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print()Tom Rini2012-09-27-0/+4
| | | | | | | | Only omap4/5 currently have a meaningful set of display text and overo had been adding a function to display nothing. Change how this works to be opt-in and only turned on for omap4/5 now. Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2012-09-25-6/+31
|\
| * powerpc/fsl-corenet: work around erratum A004510Scott Wood2012-08-23-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Erratum A004510 says that under certain load conditions, modified cache lines can be discarded, causing data corruption. To work around this, several CCSR and DCSR register updates need to be made in a careful manner, so that there is no other transaction in corenet when the update is made. The update is made from a locked cacheline, with a delay before to flush any previous activity, and a delay after to flush the CCSR/DCSR update. We can't use a readback because that would be another corenet transaction, which is not allowed. We lock the subsequent cacheline to prevent it from being fetched while we're executing the previous cacheline. It is filled with nops so that a branch doesn't cause us to fetch another cacheline. Ordinarily we are running in a cache-inhibited mapping at this point, so we temporarily change that. We make it guarded so that we should never see a speculative load, and we never do an explicit load. Thus, only the I-cache should ever fill from this mapping, and we flush/unlock it afterward. Thus we should avoid problems from any potential cache aliasing between inhibited and non-inhibited mappings. NOTE that if PAMU is used with this patch, it will need to use a dedicated LAW as described in the erratum. This is the responsibility of the OS that sets up PAMU. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/corenet_ds: Update README and README.srio-pcie-boot-corenetLiu Gang2012-08-23-6/+6
| | | | | | | | | | | | | | | | | | Added descriptions about boot from PCIE in the files README and doc/README.srio-pcie-boot-corenet, and changed the name of the doc/README.srio-boot-corenet to doc/README.srio-pcie-boot-corenet. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | README: Cleanup description of supported partitions.Karl O. Pinc2012-09-02-4/+11
| | | | | | | | | | | | README: Cleanup description of supported partitions. Signed-off-by: Karl O. Pinc <kop@meme.com>
* | README: Update ver env var descriptionBenoît Thébaudeau2012-09-02-1/+2
| | | | | | | | | | | | | | | | Commit 155cb01 replaced the read-only property of the ver env var with an auto-restoring behavior. Update the README file accordingly. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Wolfgang Denk <wd@denx.de>
* | pci: add CONFIG_PCI_ENUM_ONLY for platforms that don't need PCI setup doneAndrew Sharp2012-09-02-0/+7
| | | | | | | | | | | | | | | | | | | | | | Introduce CONFIG_PCI_ENUM_ONLY variable for platforms that just want a quick enumberation of the PCI devices, but don't need any setup work done. This is very beneficial on platforms that have u-boot loaded by another boot loader which does a more sophisticated job of setup of PCI devices than u-boot. That way, u-boot can just read what's there and get on with life. This is what SeaBIOS does. Signed-off-by: Andrew Sharp <andywyse6@gmail.com>
* | README: fix references to config_cmd_default.hStephen Warren2012-09-01-2/+2
|/ | | | | | | All usage of config_cmd_default.h uses <> for the include statement. Update the README to do the same, rather than using "". Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
* net: nfs: make NFS_TIMEOUT configurableTetsuyuki Kobayashi2012-07-12-0/+7
| | | | | | | NFS_TIMEOUT is constant value defined in net/nfs.c. But sometimes it needs to adjust. This patch enables to override NFS_TIMEOUT by defining CONFIG_NFS_TIMEOUT in a board specific config file. Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
* Add env vars describing U-Boot target boardStephen Warren2012-07-09-0/+14
| | | | | | | | | | | This can be useful for generic scripts. For example, rather than hard- coding a script to ext2load tegra-harmony.dtb, it could load ${soc}-${board}.dtb and hence not need adjustments to run on multiple boards. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* PATCH 1/4][v4] doc:Add documentation for e500 external debugger supportPrabhakar Kushwaha2012-07-06-0/+9
| | | | | | | | | | | | This describes requirement of e500 and e500v2 processor to support external debugger. It also provide an insight of the configuration switch required and their description. Signed-off-by: Radu Lazarescu <radu.lazarescu@freescale.com> Signed-off-by: Marius Grigoras <marius.grigoras@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* net: Add link-local addressing supportJoe Hershberger2012-05-23-0/+10
| | | | | | | Code based on networking/zcip.c in busybox commit 8531d76a15890c2c535908ce888b2e2aed35b172 Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
* net: Add option CONFIG_BOOTP_MAY_FAILJoe Hershberger2012-05-23-0/+7
| | | | | | | | This is useful if you want to look for a DHCP server, but try some other settings if not available. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* ARM: enable Thumb buildAneesh V2012-05-15-0/+8
| | | | | | | | Enable Thumb build and ARM-Thumb interworking based on the new config flag CONFIG_SYS_THUMB_BUILD Signed-off-by: Aneesh V <aneesh@ti.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2012-04-30-0/+24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/85xx: don't touch MAS7 on e500v1 when relocating CCSR powerpc/85xx: don't display address map size (32-bit vs. 36-bit) during boot cmd_bdinfo: display the address map size (32-bit vs. 36-bit) PowerPC: correct the SATA for p1/p2 rdb-pc platform powerpc/corenet_ds: Slave core in holdoff when boot from SRIO powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO powerpc/corenet_ds: Slave uploads ucode when boot from SRIO powerpc/corenet_ds: Slave module for boot from SRIO powerpc/corenet_ds: Master module for boot from SRIO powerpc/corenet_ds: Document for the boot from SRIO powerpc/corenet_ds: Correct the compilation errors about ENV powerpc/srio: Rewrite the struct ccsr_rio powerpc/85xx:Fix lds for nand boot debug info powerpc/p2041rdb: add env in NAND support powerpc/p2041rdb: add NAND and NAND boot support powerpc/mpc8xxx: Fix CONFIG_DDR_RAW_TIMING for two boards powerpc/85xx:Avoid vector table compilation for nand_spl powerpc/85xx:Fix IVORs addr after vector table relocation powerpc/85xx:Avoid hardcoded vector address for IVORs powerpc/p1023rds: Disable nor flash node and enable nand flash node
| * powerpc/corenet_ds: Slave reads ENV from master when boot from SRIOLiu Gang2012-04-24-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When boot from SRIO, slave's ENV can be stored in master's memory space, then slave can fetch the ENV through SRIO interface. NOTE: Because the slave can not erase, write master's NOR flash by SRIO interface, so it can not modify the ENV parameters stored in master's NOR flash using "saveenv" or other commands. Master needs to: 1. Put the slave's ENV into it's own memory space. 2. Set an inbound SRIO window covered slave's ENV stored in master's memory space. Slave needs to: 1. Set a specific TLB entry in order to fetch ucode and ENV from master. 2. Set a LAW entry with the TargetID SRIO1 or SRIO2 for ucode and ENV. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
| * powerpc/corenet_ds: Slave module for boot from SRIOLiu Gang2012-04-24-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the powerpc processors with SRIO interface, boot location can be configured from SRIO1 or SRIO2 by RCW. The processor booting from SRIO can do without flash for u-boot image. The image can be fetched from another processor's memory space by SRIO link connected between them. The processor boots from SRIO is slave, the processor boots from normal flash memory space and can help slave to boot from its memory space is master. They are different environments and requirements: master: 1. NOR flash for its own u-boot image, ucode and ENV space. 2. Slave's u-boot image in master NOR flash. 3. Normally boot from local NOR flash. 4. Configure SRIO switch system if needed. slave: 1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV. 2. Boot location should be set to SRIO1 or SRIO2 by RCW. 3. RCW should configure the SerDes, SRIO interfaces correctly. 4. Slave must be powered on after master's boot. 5. Must define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE because of no ucode locally. For the slave module, need to finish these processes: 1. Set the boot location to SRIO1 or SRIO2 by RCW. 2. Set a specific TLB entry for the boot process. 3. Set a LAW entry with the TargetID SRIO1 or SRIO2 for the boot. 4. Slave's u-boot image should be generated specifically by make xxxx_SRIOBOOT_SLAVE_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
* | CMD: Fix typo CMD_FSL -> CMD_MFSL in readmeMarek Vasut2012-04-19-1/+1
|/ | | | | | Signed-off-by: Marek Vasut <marex@denx.de> Cc: vapier@gentoo.org Acked-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.1 at 2024-12-27 07:42:43 +0000