summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAgeLines
* ENGR00173966-4: ARM2: add initial support for i.mx6sdlJason Liu2012-02-07-2/+3
| | | | | | | | | | | | | | | | | This patch add the initial support for i.mx6dl ARM2 board -SD/MMC basic -DDR 400Mhz, -FEC,basic Due to i.mx6dl shares the same board with i.mx6q on ARM2, the most common code should be the same as the i.mx6q ARM2 So, no need to create one seperate board file for i.mx6dl. But We can't simply resue anything from the board file since the i.mx6dl iomux is changed and thus we have to deal with the difference between i.mx6q and i.mx6dl for the pad setting part. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00172343 Add suport for i.MX 6Q Sabre Smart DeviceNancy Chen2012-01-24-0/+8
| | | | | | | | Add suport for i.MX 6Quad SABRE Smart Device. Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com> Signed-off-by: Tony Lin <tony.lin@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com>
* ENGR00170299-3 Android: add android board configure file.Zhang Jiejing2011-12-15-0/+1
| | | | | | add android mx6q sabrelite configure file. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00169919 MX6Q ARM2 U-Boot : Support Pop CPU BoardEric Sun2011-12-13-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for MX6Q ARM2 LPDDR2 POP CPU Board. Change thing include - TEXT_BASE - RAM address and size - Initialization DCD - MMU related code Use mx6q_arm2_lpddr2pop_config as the build config. After u-boot.bin is generated, set the board to serial download mode, use sb loader to run the bootloader. There is one line in the original DDR initialization script setmem /32 0x00B00000 = 0x1 however this address can not be accessed by DCD. A try to add it later in "dram_init" block the boot up. Waiting for IC team to give an explanation on it. Hold temperorily The MMU Change can be concluded as the following - Cacheable and Uncacheable SDRAM allocation changes to Phys Virtual Size Property ---------- ---------- -------- ---------- 0x10000000 0x10000000 256M cacheable 0x80000000 0x20000000 16M uncacheable 0x81000000 0x21000000 240M cacheable - TEXT_BASE change to 0x10800000, which reserves 8MB of memory at the start of SDRAM. This address makes sure that the text section of U-boot have the same Physical and Virtural address, thus the PC don't need to change when MMU is enabled. Also the text section is all allocated in cacheable memory, which may increase excecution performance. - Since this SDRAM allocation avoid overlap in physical memory between cacheable and uncacheable memory, the implementation of __ioremap can be ignored Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00162709 Add Support for MX6Q Sabre AutoEric Sun2011-11-21-0/+3
| | | | | | | 1. Change RAM size from 2GB to 1GB 2. Default boot from MMC Dev 2 Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00161691 Manufacturing update for Sabre-liteMahesh Mahadevan2011-11-08-1/+2
| | | | | | Add support for the manufacturing tool on MX6 Sabre-lite Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
* ENGR00161004 MX6Q Uboot Rename sabreauto to arm2 boardAnish Trivedi2011-10-28-6/+6
| | | | | | | | | Sabreauto is an inaccurate name for the Armadillo2 board that this code is actually meant for. So, replaced "sabreauto" in folder names, file names, configs, and code with "arm2". Created a new machine id for ARM2 board. Signed-off-by: Anish Trivedi <anish@freescale.com>
* ENGR00160399 Added support for the MX6Q Sabre-lite boardMahesh Mahadevan2011-10-25-0/+3
| | | | | | Includes support for uSDHC read, write, FEC, SPI-NOR etc. Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
* ENGR00139279-2 MX6Q: add mfgtool supportHuang Shijie2011-10-14-0/+1
| | | | | | add the MFGTOOL support for mx6q. Signed-off-by: Huang Shijie <b32955@freescale.com>
* ENGR00159696 [MX6]Enable lpddr2 boardAnson Huang2011-10-11-0/+1
| | | | | | | And new config to enable lpddr2 board with H9TKNNN4KDMPQR-NDM chip. Signed-off-by: Anson Huang <b20788@freescale.com>
* ENGR00153526 mx53 pcba: add pcba board revB support in ubootXinyu Chen2011-07-27-0/+4
| | | | | | | | | | | | | | | Add new machine type for pcba. Add UART, I2C, SD/MMC, PMIC, DDR initial support. Add MFG tool support. Add support for MC34708 on revB pcba board. Update VDDGP setting on MC34708 PMIC for revB board. Close unused clock, for fastboot it will enable usb_phy usb_oh3 clock by itself, still need to verify this work or not when revB bootup. Signed-off-by: Wayne Zou <b36644@freescale.com> Signed-off-by: Lily Zhang <r58066@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU boardAnson Huang2011-06-24-0/+8
| | | | | | | | | | | | | Use 528M DDR script Disable L2 cache because rom enable L2 cache when use plug-in Fix usdhc pad settings Remove mac address hardcode Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Richard Zhu <r65037@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Anish Trivedi <anish@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00143442 uboot: support android spi boot and mfg on mx50 rd3 boardXinyu Chen2011-05-16-0/+1
| | | | | | | | | | | | Add mx50_rd3_android default config file Add basic support for UBI partition mount and UBIFS file read for recovery Add gpmi nand enable in MFG kernel commandline by uboot configure, which enable MFG tool to flash system images on NAND. The total NAND boot and NAND recovery has been disabled. They will be enabled later. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00143178 mx53 ARD DDR3 board: add MFG tool supportLily Zhang2011-05-10-0/+1
| | | | | | Add MFG tool support for MX53 ARD DDR3 board. Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00140872 Add MX50 RD3 SupportRobby Cai2011-03-22-0/+2
| | | | | | | | Assembled With new PMIC chip - MC34708 (Ripley), and new SPI NOR - M25P32 as well. Add new config file for RD3. Signed-off-by: Robby Cai <R63905@freescale.com>
* ENGR00140824 Android: Enable fastboot support for mx50 rdpSammy He2011-03-21-0/+1
| | | | | | Enable fastboot support for mx50 rdp. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00140692 Update for DDR3-based MX53 SABRE Auto boardsMahesh Mahadevan2011-03-16-0/+1
| | | | | | | Added a new config file, the DDR setup is similar to the MX53 Quick Start & MX53 SABRE-Tablet ref design boards. Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
* ENGR00137791 MX53: Update for MFG toolLily Zhang2011-01-11-0/+3
| | | | | | | | - Add MFG tool support for MX53 SMD and MX53 LOCO boards - Update mx53 ARD MFG defconfig to pass compile Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00137603 Add mx53_smd_android config for androidSammy He2011-01-08-0/+1
| | | | | | Add mx53_smd_android config for android build. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00137497-2 MX53: Add LOCO board supportLily Zhang2010-12-30-0/+2
| | | | | | | | | | | Add MX53 LOCO board support The following functions are tested in the board: - Micro SD boot - MMC/SD read/write. - clk command - fuse command Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00136075 MX53: Add SMD board supportLily Zhang2010-12-30-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Add MX53 SMD support: - Use DDR3 script for SMD board from Mike Kjar: "Rita_init_LCB_CMOS.inc" - Set the default CPU core frequency as 1GHZ. The following functions are tested on SMD board: - SD/MMC boot, read, write via SDHC1 - eMMC4.4 boot, read, write via SDHC3. - SATA boot, read, write. To support SATA boot via internal clock, please ensure the fuse "SATA_ALT_CLK_REF" was blown. - FEC - UART - clk command - iim command Signed-off-by: Liu Ying <b17645@freescale.com> Signed-off-by: Jason Chen <b02280@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Anish Trivedi <anish@freescale.com> Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00137410 MX53 split board files into different foldersLily Zhang2010-12-29-5/+5
| | | | | | Split different MX53 board files into different folder. Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00133744: Merge mx50_arm2 to mx50_rdpTerry Lv2010-12-01-7/+1
| | | | | | Merge mx50_arm2 to mx50_rdp. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00133551-2 Add fastboot driver support for android.Sammy He2010-11-19-0/+1
| | | | | | | | | | | | | | | | | | | Add fastboot driver support for android. In this commit, basic fastboot command is supported. 1) Reboot board >fastboot reboot 2) Get information of board, e.g, product name >fastboot getvar product 3) Download images in PC and flash to SD card >fastboot flash bootloader u-boot-no-padding.bin >fastboot flash kernel uImage >fastboot flash uramdisk uramdisk.img >fastboot flash system system.img >fastboot flash recovery recovery.img Certainly, SD card must have been formatted as Android user guider doc already. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00132886 mx50-rdp: add mx50 rdp board mfg-tool firmware defconfigPeter Chen2010-10-22-0/+1
| | | | | | Add mx50 rdp board mfg-tool firmware configration Signed-off-by: Peter Chen <peter.chen@freescale.com>
* ENGR00132656 MX53 ARD: Add MFG tool supportLily Zhang2010-10-15-0/+1
| | | | | | | Add default uboot defconfig for MX53 ARD MFG tool Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00131691 MX50 RDP UbootAnish Trivedi2010-09-21-0/+8
| | | | | | | | | | Add support for building uboot for MX50 reference design platform: 1) LPDDR2 init script (v0.3 from Mike Kjar, dated 9/14) 2) iomux 3) new board file and machine id for RDP 4) Updates for iram boot on RDP Signed-off-by: Anish Trivedi <anish@freescale.com>
* ENGR00131779: Use serial_mxc as uart driver for all platformsTerry Lv2010-09-21-0/+5
| | | | | | Use serial_mxc as uart driver for all platforms. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00131705-2 Add MX53 ARD supportLily Zhang2010-09-20-0/+1
| | | | | | | | | | | Add MX53 Automotive Reference Board (ARD) support 1. Add DDR2 initialization script 2. Add external ethernet support 3. Update PIN settings for UART, I2C, SDHC etc Signed-off-by: Anish Trivedi <anish@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00131705-1 rename mx53_evk folder as mx53_rdLily Zhang2010-09-20-1/+1
| | | | | | | | Rename the folder "mx53_evk" as "mx53_rd" to put all MX53 board files. Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00131578: Add android recovery mode support for mx53Terry Lv2010-09-20-0/+3
| | | | | | Add android recovery mode support for mx53. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00131712 UBOOT:add DDR2 support for IMX50Huang Shijie2010-09-19-0/+1
| | | | | | | | | | | | | | add DDR2 support for U-BOOT. The infomation about the init script: Date : Aug-30,2010 Author : Tommy Version: 0.1 please check : http://compass.freescale.net/doc/219931536/Codex_DDR2_266MHz.inc.txt Signed-off-by: Huang Shijie <b32955@freescale.com>
* ENGR00125613 mfg-tool: Add mx50 mfg firmware supportPeter Chen2010-07-27-1/+2
| | | | | | Add mx50 mfg firmware support Signed-off-by: Peter Chen <peter.chen@freescale.com>
* ENGR00124359 Add uboot support for MX50Jason Liu2010-07-07-0/+9
| | | | | | | | | | | | | | Add initial support for MX50 -Support mddr200Mhz, lpddr2266Mhz ARM2 board, -Support boot from SD/MMC, -Support boot from SPI-NOR, -Support FEC, UART, -Support SD/MMC/SPI command within UBOOT Signed-off-by: Anish Trivedi <anish@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00124710 MX53 Uboot: Add MFG tool supportLily Zhang2010-06-28-0/+1
| | | | | | Add MFG tool support for MX53 EVK Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00123641 MX53: Add DDR3 CPU board supportJason Liu2010-05-20-0/+1
| | | | | | | | Add DDR3 CPU board support, DDR3 clock 400Mhz Create one config file for it since the DDR3 init script is much different wtih DDR2. Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00122342: missing mx23 evk machine ID settingTerry Lv2010-04-16-3/+3
| | | | | | Change stmp378x to mx23evk in u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00122030 Mfg Firmware support fot imx25Yan Wang2010-04-07-0/+1
| | | | | | Add mfg firmware support for imx25 Signed-off-by:Yan Wang<r65094@freescale.com>
* ENGR00122203 UBOOT: Add MX53 ARM2 board supportJason2010-04-01-0/+1
| | | | | | | | Both EVK and ARM2 board using the same machine id. Currently, use system_rev to diff ARM2 board. DDR freq for ARM2 has been set to 400M, but 300M on EVK. Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00122085 MX35 Add Uboot Firmware supportWallace Wang2010-03-31-0/+1
| | | | | | Build Mfg firmware for mx35 3stack Signed-off-by: Wallace Wang <r59996@freescale.com>
* ENGR00121202 Add uboot support for MX53Jason2010-03-17-0/+3
| | | | | | Add uboot support for MX53 Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00121379: MX28 U-BOOT enhancementsTerry Lv2010-03-12-2/+2
| | | | | | MX28 U-BOOT enhancements. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121029 Add MX51-BBG Uboot Firmware supportFrank Li2010-02-22-0/+1
| | | | | | Build Mfg firmware for mx51-bbg Signed-off-by: Frank Li <frank.li@freescale.com>
* ENGR00119716: MX28 basic support.Terry Lv2009-12-31-0/+3
| | | | | | Add mx28 to u-boot and pass the compiling. Signed-off-by: Terry Lv <r65388@freescale.com>
* u-boot v2009.08 sd/mmc support.Terry Lv2009-11-03-4/+4
| | | | Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116083: Recovery mode support for Android on mx51.Terry Lv2009-09-10-0/+2
| | | | | | Recovery mode support for Android on mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115592: Replace whitespaces with tabs in MakefileTerry Lv2009-09-10-1/+1
| | | | | | Replace whitespaces with tabs in Makefile. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115046: Add new MMC config option for mx35.Terry Lv2009-09-10-2/+3
| | | | | | Add new MMC config option for mx35. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113941 MX233: Make UBOOT v2009.01 work on EVK boardLionel Xu2009-09-10-0/+3
| | | | | | | | Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as CFG_HZ. Change MAC address getting source from initial configuration to On-Chip OTP. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00112298 BBG2: Basic boot.r653882009-09-10-0/+3
| | | | | | Basic boot on BBG2 board. Signed-off-by: r65388 <r65388@freescale.com>
generated by cgit v1.1 at 2024-11-24 15:37:05 +0000