summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAgeLines
* Marvell MV88F6281GTW_GE Board supportPrafulla Wadaskar2009-07-18-0/+3
| | | | | | | | | | | | | | | This is Marvell's 88F6281_A0 based custom board developed for wireless access point product This patch is tested for- 1. Boot from DRAM/SPI flash/NFS 2. File transfer using tftp and loadb 3. SPI flash read/write/erase 4. Booting Linux kernel and RFS from SPI flash 5. Boot from USB supported Reviewed-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* Marvell Sheevaplug Board supportPrafulla Wadaskar2009-07-18-1/+3
| | | | | | | | | | | | | | | | | | | Reference: http://plugcomputer.org/ http://openplug.org/plugwiki/index.php/Das_U-boot_plug_support This patch is tested for- 1. Boot from DRAM/NAND flash 2. File transfer using tftp 3. NAND flash read/write/erase 4. Linux kernel and RFS Boot from NAND 5. Enabled USB PHY init for kernel need 6. Boot from USB supported Note: to boot Kirkwood kernel with USB support, you should add "usb start" in the boot sequence Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* fix: missing autoconfig.mk from general MakefileJean-Christophe PLAGNIOL-VILLARD2009-07-17-0/+1
| | | | | | | | | | | | | At the first run of make we generate the autoconf.mk and autoconf.mk.dep if not already the case and we currently include only to .dep In order to use these autogenerated values we need to include it also even if it's included in config.mk but it's done before their generation Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of /home/wd/git/u-boot/masterWolfgang Denk2009-07-14-12/+47
|\
| * Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-13-3/+38
| |\
| | * Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-13-3/+38
| | |\
| | | * at91: Introduction of at91sam9g10 SOC.Sedji Gaouaou2009-07-12-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
| | | * at91: Introduction of at91sam9g45 SOC.Sedji Gaouaou2009-07-12-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
| * | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-13-7/+8
| |\ \ \ | | |/ /
| | * | sh: Add support ESPT-GIGA boradNobuhiro Iwamatsu2009-07-11-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ESPT-Giga is SH7763-based reference board. Board support is relatively sparse, presently supporting serial, gigabit ethernet, USB host, and MTD. More information (in Japanese) available at: http://www.cente.jp/product/cente_hard/ESPT-Giga.html Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | sh: make the linker scripts more genericJean-Christophe PLAGNIOL-VILLARD2009-07-08-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | currently we need to sync the linker script enty and TEXT_BASE manualy and the reloc_dst is based on it instead provide it now from the ldflags tested on r2dplus Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | sh7785lcr: fix out of tree buildJean-Christophe PLAGNIOL-VILLARD2009-07-08-2/+3
| | |/ | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | api_examples/Makefile: General cleanupPeter Tyser2009-07-11-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Remove symlinking of files located outside api_examples/ * Auto generate dependencies for files located outside api_examples/ * Update names of variables to be similar to those in tools/Makefile * Fix out of tree build error Dependencies are calculated for all files in the SRCS variable. Previously, the SRCS variable contained files which were symlinked into the api_examples/ directory. These symlinked files did not exist when dependencies were calculated when building out of tree. This resulted in errors such as: make[1]: *** No rule to make target `/work/wd/tmp-ppc/api_examples/.depend', needed by `_depend'. Stop. make[1]: Leaving directory `/home/wd/git/u-boot/work/api_examples' make: *** [depend] Error 2 Since symlinked source files are no longer used, this bug no longer exists. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Rafal Jaworowski <raj@semihalf.com>
| * | kallsyms: fix escaping of NUL char in stringsMike Frysinger2009-07-10-1/+1
| |/ | | | | | | | | | | | | | | | | The current kallsyms code is using \\0 to escape the backslash in the awk code, but the shell too needs escaping. This way we make sure gcc is passed the \0. Then gcc itself will consume this as an octal, so we have to use 000 so gcc will create the final NUL. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | board support patch for phyCORE-MPC5200B-tinyJon Smirl2009-07-10-0/+9
|/ | | | | | | | | | Add support for the Phytec phyCORE-MPC5200B-tiny. Code originally from Pengutronix.de. Created CONFIG_SYS_ATA_CS_ON_TIMER01 define for when IDE CS is on Timer 0/1 Signed-off-by: Jon Smirl <jonsmirl@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-07-8/+39
|\ | | | | | | | | | | | | Conflicts: drivers/spi/Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
| * MX31: Add NAND SPL boot support to i.MX31 PDK board.Magnus Lilja2009-07-06-2/+10
| | | | | | | | Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| * arm nomadik: allow Nand and OneNand to coexistsAlessandro Rubini2009-07-06-2/+2
| | | | | | | | | | | | | | | | | | The evaluation kit has both Nand and OneNand, both drivers are there and the two configurations only select a different default for the jffs partition. This adds the OneNand driver and cleans up storage. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
| * arm nomadik: rename board to nhk8815Alessandro Rubini2009-07-06-3/+3
| | | | | | | | | | | | | | | | This is an error in my side in the initial submission: nobody calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
| * xscale: add support for the polaris boardStefano Babic2009-07-06-1/+6
| | | | | | | | | | | | | | The Polaris board is based on the TrizepsIV module of Keith & Koep (http://www.keith-koep.com). Signed-off-by: Stefano Babic <sbabic@denx.de>
| * at91: Add esd gmbh MEESC board supportDaniel Gorsulowski2009-07-06-0/+3
| | | | | | | | | | | | | | This patch adds support for esd gmbh MEESC board. The MEESC is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
| * MX31: Add basic support for Freescale i.MX31 PDK board.Magnus Lilja2009-07-06-0/+3
| | | | | | | | | | | | | | | | | | | | | | Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). This patch assumes that some other program performs the actual NAND boot. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Acked-by: Fabio Estevam <fabioestevam@yahoo.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * integrator: merge integratorap and integratorcpJean-Christophe PLAGNIOL-VILLARD2009-06-23-2/+2
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Peter Pearse <peter.pearse@arm.com>
| * at91sam9263ek: add nor flash supportJean-Christophe PLAGNIOL-VILLARD2009-06-21-0/+9
| | | | | | | | | | | | this will allow you to store use it for the env and to boot directly U-Boot from Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91: add support for the PM9261 board of Ronetix GmbHIlko Iliev2009-06-21-0/+3
| | | | | | | | | | | | | | | | | | | | The PM9261 board is based on the AT91SAM9261-EK board. Here is the page on Ronetix website: http://www.ronetix.at/starter_kit_9261.html Signed-off-by: Ilko Iliev <iliev@ronetix.at> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | 86xx: XPedite5170 board supportPeter Tyser2009-07-01-0/+3
|/ | | | | | | | | Initial support for Extreme Engineering Solutions XPedite5170 - a MPC8640-based 3U VPX single board computer with a PMC/XMC site. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Blackfin: move ALL += u-boot.ldr to blackfin_config.mkMike Frysinger2009-06-15-3/+1
| | | | | | | The way the ALL variable is used allows for config.mk's to add more targets themselves without having to clutter up the top level Makefile. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: unify u-boot linker scriptsMike Frysinger2009-06-14-5/+1
| | | | | | | | | | | All the Blackfin linker scripts were duplicated across the board dirs with no difference save from the semi-often used ENV_IS_EMBEDDED option. So unify all of them in the lib_blackfin/ dir and for the few boards that need to embedded the environment directly, add a LDS_BOARD_TEXT define for them to customize via their board config file. This is much simpler than forcing them to duplicate the rest of the linker script. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: ibf-dsp561: new board portHoan Hoang2009-06-14-0/+4
| | | | | Signed-off-by: Hoan Hoang <hnhoan@i-syst.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: blackstamp: new board portMike Frysinger2009-06-14-2/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf537-srv1: new board portMike Frysinger2009-06-14-2/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf537-minotaur: new board portMike Frysinger2009-06-14-1/+4
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf537-pnav: new board portMike Frysinger2009-06-14-1/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: cm-bf527: new board portMike Frysinger2009-06-14-2/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: cm-bf548: new board portMike Frysinger2009-06-14-2/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: tcm-bf537: new board portMike Frysinger2009-06-14-2/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: cm-bf561: new board portMike Frysinger2009-06-14-2/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: cm-bf537e: new board portMike Frysinger2009-06-14-2/+2
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: cm-bf533: new board portMike Frysinger2009-06-14-0/+4
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: support embedding the environment into loader files (LDRs)Mike Frysinger2009-06-14-0/+1
| | | | | | | | For the most part, the Blackfin processor boots files in the LDR format rather than binary/ELF files. So we want to export the environment as a raw blob to the LDR utility so it can embed it at the right location. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* make sure toplevel $(SUBDIRS) is always declaredMike Frysinger2009-06-14-8/+8
| | | | | | | | | The $(SUBDIRS) variable is only declared when U-Boot has been configured, but it gets used all the time. In the non-configured case, it is used to generate a helpful error message, but it needs to be set properly for that to occur. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'next' of ../masterWolfgang Denk2009-06-14-8/+48
|\
| * 85xx: Add P2020DS supportSrikanth Srinivasan2009-06-12-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds support for P2020DS reference platform. DDR3 interface uses hard-coded initialization rather than SPD for now and was tested at 667Mhz. Some PIXIS register definitions and associated code sections need to be fixed. TSEC1/2/3, NOR flash, MAC/SYS ID EEPROM, PCIE1/2/3 are all tested under u-boot. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Travis Wheatley <Travis.Wheatley@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * mpc512x: Add esd gmbh mecp5123 board supportStefan Roese2009-06-12-0/+3
| | | | | | | | | | | | | | MECP5123 is a MPC5121E based module by esd gmbh. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
| * MPC512x: add support for ARIA boardWolfgang Denk2009-06-12-1/+3
| | | | | | | | | | | | | | ARIA is a MPC5121E based COM Express module by Dave/DENX. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
| * Rename ads5121 board into mpc5121adsWolfgang Denk2009-06-12-3/+3
| | | | | | | | | | | | | | | | | | We rename the board so we use a consistent name in U-Boot and in Linux. Also, we use this opportunity to move the board into the Freecale vendor directory. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: John Rigby <jcrigby@gmail.com>
| * Add support for Linux-like kallsysmsMike Frysinger2009-06-12-4/+13
| | | | | | | | | | | | | | The kernel stores address<->symbol names in it so things can be decoded at runtime. Do it in U-Boot, and we get nice symbol decoding when crashing. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * dm355 evm supportDavid Brownell2009-06-12-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial U-Boot support for the DaVinci DM355 EVM. This is a board from Spectrum Digital. Board docs include schematic and firmware for its microcontroller: http://c6000.spectrumdigital.com/evmdm355/revd/ Most of the DM355 chip is fully documented by TI, the most notable exception being the MPEG/JPEG coprocessor (programmable using codecs available at no cost from TI), which is omitted from its DM335 sibling: http://focus.ti.com/docs/prod/folders/print/tms320dm355.html This version can boot from the on-board DM9000 Ethernet chip, after being loaded (from NAND, MMC/SD, or UART). In the near future, NAND and USB support could be added ... NAND support is being held back until the support for the 4-bit ECC hardware is ready. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
| * ZOOM2 Add initial support for Zoom2Tom Rix2009-06-12-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zoom2 is a new board from Texas Instruments and LogicPD The logicpd web site is a good source for general information on this board. Please start looking here if the below links are broken. http://www.logicpd.com This is a pdf of the product http://www.logicpd.com/sites/default/files/1012659A_Zoom_OMAP34x-II_MDP_Brief.pdf This is the product description web page http://www.logicpd.com/products/development-kits/texas-instruments-zoom%E2%84%A2-omap34x-ii-mdp This patch provides a zoom2 base target by copying zoom1 and by making some obvious changes. To configure, run make omap3_zoom2_config Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * ppc4xx: Add Sequoia RAM-booting targetStefan Roese2009-06-12-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds another build target for the AMCC Sequoia PPC440EPx eval board. This RAM-booting version is targeted for boards without NOR FLASH (NAND booting) which need a possibility to initially program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000) configured to setup the SDRAM, this debugger can load this RAM- booting image to the target address in SDRAM (in this case 0x1000000) and start it there. Then U-Boot's standard NAND commands can be used to program the NAND FLASH (e.g. "nand write ..."). Here the commands to load and start this image from the BDI2000: 440EPX>reset halt 440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin 440EPX>go 0x1000000 Please note that this image automatically scans for an already initialized SDRAM TLB (detected by EPN=0). This TLB will not be cleared. This TLB doesn't need to be TLB #0, this RAM-booting version will detect it and preserve it. So booting via BDI2000 will work and booting with a complete different TLB init via U-Boot works as well. Signed-off-by: Stefan Roese <sr@denx.de>
generated by cgit v1.1 at 2024-11-26 02:21:47 +0000