summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAgeLines
* Prepare v2013.04-rc2Tom Rini2013-04-03-1/+1
| | | | Signed-off-by: Tom Rini <trini@ti.com>
* build: Fix make errors generated when building 'distclean'Vadim Bendebury2013-04-02-1/+3
| | | | | | | | | | | | | | | | | | | | | | | It was noticed that when `make distclean' is run, the make process terminates with error reporting something like: rm: cannot remove '/tmp/foobar/': Is a directory make: *** [clobber] Error 1 The problem is that the list of files targeted for removal includes a directory in case CONFIG_SPL_TARGET is not set. The fix has been tested as follows: Ran several times the following sequence of commands: CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make O=/tmp/foobar smdk5250_config CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make O=/tmp/foobar distclean it did not cause an error, it used to before this change. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* ti814x_evm: add ti814x evm board supportMatt Porter2013-03-24-1/+1
| | | | | | | | | | Add TI814X EVM board directory, config file, and MAINTAINERS entry. Enable build. Signed-off-by: Matt Porter <mporter@ti.com> Reviewed-by: Tom Rini <trini@ti.com> [trini: Adapt to recent omap_hsmmc requirements, Matt re-tested] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-15-2/+2
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2013-02-23-9/+9
| |\
| * | build: imx: Fix 'u-boot.imx' build without full OBJTREE referenceOtavio Salvador2013-02-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When calling 'make u-boot.imx' the build were failing as it were expecting the full path for the file; this regression has been included by commit 71a988a (imximage.cfg: run files through C preprocessor). The direct references for u-boot.imx were replaced by $(obj) as config.mk handles the proper setting of it making it set to $(OBJTREE) when required. The build has been test using: - ./MAKEALL -s mx5 -s mx6 - make u-boot.imx - make O=/tmp/build Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
* | | Refactor linker-generated arraysAlbert ARIBAUD2013-03-12-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refactor linker-generated array code so that symbols which were previously linker-generated are now compiler- generated. This causes relocation records of type R_ARM_ABS32 to become R_ARM_RELATIVE, which makes code which uses LGA able to run before relocation as well as after. Note: this affects more than ARM targets, as linker- lists span possibly all target architectures, notably PowerPC. Conflicts: arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds arch/arm/cpu/armv7/omap-common/u-boot-spl.lds board/ait/cam_enc_4xx/u-boot-spl.lds board/davinci/da8xxevm/u-boot-spl-da850evm.lds board/davinci/da8xxevm/u-boot-spl-hawk.lds board/vpac270/u-boot-spl.lds Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* | | Prepare v2013.04-rc1Tom Rini2013-03-04-2/+2
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | | sandbox: Add host filesystemSimon Glass2013-03-04-0/+1
| |/ |/| | | | | | | | | | | This allows reading of files from the host filesystem in sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@ti.com>
* | x86: Remove unneeded cruft from main MakefileSimon Glass2013-02-14-5/+1
| | | | | | | | | | | | | | | | These lines are dealt with in the x86 Makefile and link script, so punt them. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Gabe Black <gabeblack@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-02-12-7/+8
|\ \
| * \ Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-02-02-4/+5
| |\ \ | | |/
| | * imximage.cfg: run files through C preprocessorTroy Kisky2013-01-22-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * mx23: config: Enable building of u-boot.sb binaryOtavio Salvador2013-01-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | For i.MX23 we need to pass imx23 as elftosb param. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * | Tegra30: Add generic Tegra30 build supportTom Warren2013-01-16-3/+3
| |/ | | | | | | | | | | | | | | This patch adds basic Tegra30 (T30) build support - no specific board is targeted. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | Merge remote-tracking branch 'mpc83xx/next'Kim Phillips2013-01-16-1/+5
|\ \ | |/ |/|
| * spl: Change PAD_TO to CONFIG_SPL_PAD_TOScott Wood2012-12-19-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | This was already used by some SPL targets, and allows the pad amount to be specified by board config headers rather than only in makefile fragments. Also supply a pad-to of zero if the variable is undefined. It works without this, but this avoids relying on undocumented behavior. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Prepare v2013.01Tom Rini2013-01-15-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-01-11-1/+1
|\ \
| * | Makefile: remove MLO.byteswap on clobberNishanth Menon2013-01-10-1/+1
| | | | | | | | | | | | | | | | | | | | | On clobber, do a cleanup even for SPL build else, we'd have MLO.byteswap remaining for certain platforms like am33xx SPL builds Signed-off-by: Nishanth Menon <nm@ti.com>
* | | Prepare v2013.01-rc3Tom Rini2013-01-10-1/+1
|/ / | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| |
| \
| \
| \
*---. \ Merge samsung, imx, tegra into u-boot-arm/masterAlbert ARIBAUD2012-12-22-18/+46
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | This commit merges branches from samsung, imx and tegra meant to fix merge issues between u-boot/master and u-boot-arm/master, as well as a few manual merge fixes.
| | | * \ Merge remote-tracking branch 'u-boot/master' into u-boot-arm-mergedAllen Martin2012-12-19-17/+45
| | | |\ \ | |_|/ / / |/| | | / | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: README arch/arm/cpu/armv7/exynos/clock.c board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| | | * Prepare v2013.01-rc2Tom Rini2012-12-14-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| | * | Merge branch 'master' of git://git.denx.de/u-boot into masterStefano Babic2012-12-08-16/+44
| | |\ \ | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/woodburn_common.h board/woodburn/woodburn.c These boards still use the old old PMIC framework, so they do not merge properly after the power framework was merged into mainline. Fix all conflicts and update woodburn to use Power Framework. Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | mxs: Silence elftosbMarek Vasut2012-12-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The elftosb tool is now called with -d switch, which produces debug output to the stdout. The debug output is completely useless for regular operation, so silence it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| * | | Merge branch 'master' of git://git.denx.de/u-boot into resolveMinkyu Kang2012-12-10-16/+44
| |\ \ \ |/ / / / | | | _ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: README board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| * | Allow CONFIG_BOARD_SIZE_LIMIT to be specified in hexJoe Hershberger2012-12-06-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Use the printf command to convert the number in any valid format into the expected decimal format. The resulting errors should be printed to stderr. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | Makefile: Add target for combined spl/u-boot.bin & u-boot.imgStefan Roese2012-12-05-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new make target "u-boot-img.bin" consists of the U-Boot SPL image with the real, full-blown U-Boot image directly attached to it. The full-blown U-Boot image has the mkimage header included, with its load-address and entry-point. This will be used by the upcoming a3m071 MPC5200 board port. Signed-off-by: Stefan Roese <sr@denx.de>
| * | Makefile: Add possibility to set entry-point for u-boot.imgStefan Roese2012-12-05-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enabled boards using the SPL framework to set an entry point in the U-Boot mkimage image "u-boot.img". Until now the entry point in the header has been set to 0. By setting CONFIG_SYS_UBOOT_START in the board header, boards can override this default location. This will be used by the upcoming a3m071 MPC5200 board port. Signed-off-by: Stefan Roese <sr@denx.de>
| * | x86: Allow excluding reset vector code from u-bootGabe Black2012-11-28-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running from coreboot we don't want this code. This version works by ifdef-ing out all of the code that would go into those sections and all the code that refers to it. The sections are then empty, and the linker will either leave them empty for the loader to ignore or remove them entirely. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2012-11-26-5/+17
| |\ \
| | * | powerpc: change .fixup test to a GCC version testScott Wood2012-11-26-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was introduced by commit 244615197469dd6fe75ae082f38424b97c79aeaf, but it fails in a minimal SPL build where the only thing in arch/powerpc/lib is cache.c, which apparently doesn't generate any fixup records. The problem is reported to occur with GCC 3.x, so insist on GCC 4.0 or newer. Patterned after checkthumb as suggested by Tom Rini. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Tom Rini <trini@ti.com> -- v2: test gcc version instead of testing nothing
| | * | spl: introduce CONFIG_SPL_TARGETScott Wood2012-11-26-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the SPL target is specified in a CPU-specific makefile fragment. While some targets may need something more complicated than a simple target name, targets which don't need this shouldn't have to provide a makefile fragment just for this. Signed-off-by: Scott Wood <scottwood@freescale.com> --- v2: Removed default target as it's been pointed out to me how existing platforms cause the SPL to be built.
| | * | spl: rename u-boot-pad.bin to u-boot-with-spl.binScott Wood2012-11-26-4/+4
| | | | | | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
| | * | Add u-boot-pad.bin target to the MakefileJosé Miguel Gonçalves2012-11-26-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Samsung's S3C24XX SoCs need this in order to generate a binary image with a padded SPL concatenated with U-Boot. Signed-off-by: José Miguel Gonçalves <jose.goncalves@inov.pt> [scottwood@freescale.com: fixed prereq of u-boot.ubl] Signed-off-by: Scott Wood <scottwood@freescale.com> -- v2: Removed spl/ prefix from u-boot.ubl prerequisite.
| * | | musb-new: port of Linux musb driverIlya Yanok2012-11-20-0/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Existing U-Boot musb driver has no support for the new gadget framework and also seems to have other limitations. As gadget framework is ported from Linux it seems pretty natural to port musb gadget driver as well. This driver supports both host and peripheral modes. This is not a replacement for current musb driver (at least now) as there are still some consumers of the old UDC interface. No DMA operation support included, CONFIG_MUSB_PIO_ONLY should be defined. Virtual root hub device is not implemented. Known problems: with no devices connected usb_lowlevel_start() fails. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
| * | pmic:fuel-gauge: Support for MAX17042 fuel-gaugeŁukasz Majewski2012-11-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for MAX17042 fuel-gauge (FG), which is built into the MAX8997 power management device. Special file - fg_battery_cell_params.h with cells characteristics added. The FG device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | pmic:battery: Support for Trats Battery at PMIC frameworkŁukasz Majewski2012-11-14-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trats battery is now treated in the same way as other power related devices. This approach allows for more unified handling of all devices responsible for power management. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | pmic: Move pmic related code to ./drivers/power directoryŁukasz Majewski2012-11-14-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | The PMIC framework has been moved to its more natural place ./drivers/power from ./drivers/misc directory. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| * | Makefile: silence 'make clean'Andreas Bießmann2012-11-14-1/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* | | SOUND: SAMSUNG: Add I2S driverRajeshwari Shinde2012-11-15-0/+1
| |/ |/| | | | | | | | | | | | | | | This patch adds driver for I2S interface specific to samsung. Signed-off-by: R. Chandrasekar <rcsekar@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge git://git.denx.de/u-bootStefano Babic2012-11-10-32/+29
|\ \ | |/
| * Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-11-05-7/+8
| |\
| | * ARM: tegra: combine duplicate Makefile rulesStephen Warren2012-10-29-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The rules to generate u-boot-{no,}dtb-tegra.bin were almost identical. Combine them into a single paremeterized rule. This will allow the next patch to edit a single rule, rather than being cut/paste twice. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | Makefile: use EXTRAVERSION for -rc? tagWolfgang Denk2012-11-04-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | When using SUBLEVEL for the -rc? tag, this results in an ugly version string like "2013.01.-rc1" - let's use EXTRAVERSION instead to get the simple "2013.01-rc1" Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
| * | Prepare v2013.01-rc1Tom Rini2012-11-04-3/+3
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | fs: add filesystem switch libary, implement ls and fsload commandsStephen Warren2012-10-29-1/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | Implement "ls" and "fsload" commands that act like {fat,ext2}{ls,load}, and transparently handle either file-system. This scheme could easily be extended to other filesystem types; I only didn't do it for zfs because I don't have any filesystems of that type to test with. Replace the implementation of {fat,ext[24]}{ls,load} with this new code too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * arm: arm925t: remove SX1 boardAlbert ARIBAUD2012-10-26-14/+0
| | | | | | | | | | | | | | | | | | | | SX1 does not build properly by itself, is not built as part of MAKEALL arm or MAKEALL -a arm, and is only present in Makefile, not boards.cfg. As it also has no entry in MAINTAINERS, it is orphan and non-functional. Remove it. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
| * fs: Add a Coreboot Filesystem (CBFS) driver and commandsGabe Black2012-10-22-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change adds CBFS support and some commands to use it to u-boot. These commands are: cbfsinit - Initialize CBFS support and pull all metadata into RAM. The end of the ROM is an optional parameter which defaults to the standard 0xffffffff and can be used to support multiple CBFSes in a system. The last one set up with cbfsinit is the one that will be used. cbfsinfo - Print information from the CBFS header. cbfsls - Print out the size, type, and name of all the files in the current CBFS. Recognized types are translated into symbolic names. cbfsload - Load a file from CBFS into memory. Like the similar command for fat filesystems, you can optionally provide a maximum size. Support for CBFS is compiled in when the CONFIG_CMD_CBFS option is specified. The CBFS driver can also be used programmatically from within u-boot. If u-boot needs something out of CBFS very early before the heap is configured, it won't be able to use the normal CBFS support which caches some information in memory it allocates from the heap. The cbfs_file_find_uncached function searches a CBFS instance without touching the heap. Signed-off-by: Gabe Black <gabeblack@google.com> Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>