summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAgeLines
* ppc/85xx: Add ATM config for MPC8569MDSLiu Yu2010-01-25-1/+2
| | | | | Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mkimage: Add Freescale imx Boot Image support (imximage)Stefano Babic2010-01-25-0/+4
| | | | | | | | | | | | This patch adds support for "imximage" (MX Boot Image) to the mkimage utility. The imximage is used on the Freescales's MX.25, MX.35 and MX.51 processors. Further details under doc/README.imximage. This patch was tested on a Freescale mx51evk board. Signed-off-by: Stefano Babic <sbabic@denx.de>
* SPEAr : Support added for SPEAr320 boardVipin KUMAR2010-01-23-1/+2
| | | | | | | | | | | | | SPEAr320 SoC support contains basic spear320 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
* SPEAr : Support added for SPEAr310 boardVipin KUMAR2010-01-23-1/+2
| | | | | | | | | | | | | SPEAr310 SoC support contains basic spear310 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver - emi driver(cfi support) Signed-off-by: Vipin <vipin.kumar@st.com>
* SPEAr : Support added for SPEAr300 boardVipin KUMAR2010-01-23-0/+3
| | | | | | | | | | | | SPEAr300 SoC support contains basic spear300 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
* SPEAr : Support added for SPEAr600 boardVipin KUMAR2010-01-23-0/+3
| | | | | | | | | | | | SPEAr600 SoC support contains basic spear600 support along with the usage of following drivers - serial driver(UART) - i2c driver - smi driver - nand driver(FSMC) - usbd driver Signed-off-by: Vipin <vipin.kumar@st.com>
* tools: allow people to compile w/out configuringMike Frysinger2010-01-21-2/+7
| | | | | | | | | | | It's useful to be able to build up the host tools without having to select a board first. Pretty much all tools in there are config-independent anyways. Also add a shortcut "tools-all" to quickly build all host tools that are actually config-independent to allow for simple test builds. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Removing Atmel from ARM926EJ-S SystemsMatthias Weisser2010-01-21-1/+1
| | | | Signed-off-by: Matthias Weisser <weisserm@arcor.de>
* Makefile: fix parallel buildDaniel Hobi2010-01-18-1/+4
| | | | | | | | | | | | | | | | | | | | | During parallel build, the top Makefile spawns multiple sub-makes for targets in cpu/$(CPU) and $(dir $(LDSCRIPT)). If the .depend files are not present in these directories, the sub-makes may end up generating these files simultaneously which leads to corrupted content. A typical error message is: .depend:39: *** multiple target patterns. Stop. This patch serializes the creation of .depend in cpu/$(CPU) and $(dir $(LDSCRIPT)) by adding these directories to the depend target in the top Makefile. Other directories in $(LIBS) are not affected since they contain only one Make target and thus only one sub-make is spawned per directory. Signed-off-by: Daniel Hobi <daniel.hobi@schmid-telecom.ch> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: tcm-bf518: new board portHarald Krapfenbauer2010-01-17-1/+2
| | | | | Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add support for BF527-EZKIT v2.1Michael Hennerich2010-01-17-0/+4
| | | | | | | The new board revision has a different LCD. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf561-acvilon: new board portValentin Yakovenkov2010-01-17-1/+1
| | | | | Signed-off-by: Valentin Yakovenkov <yakovenkov@niistt.ru> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: tweak embedded LDR env config optionMike Frysinger2010-01-17-1/+1
| | | | | | | Use the common config option for extracting the environment for embedding into LDR files and clarify the LDR-specific option. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* mpc83xx: Add support for MPC8349 esd caddy2Reinhard Arlt2010-01-07-1/+2
| | | | | | | | | | | | | | | The caddy2 is a variant of the already supported vme8349. So we just add the differences to this board port. To better support those two boards we switched from fixed SDRAM configuration to usage of spd_sdram(). This is done by providing a board specific SPD EEPROM routine with different values for both boards. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de> changed to use mkconfig -t option instead, plus misc codingstyle fixes. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: Add NAND boot support for MPC8315E-RDB boardsAnton Vorontsov2010-01-07-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The core support for NAND booting is there already, so this patch is pretty straightforward. There is one trick though: top level Makefile expects nand_spl to be in nand_spl/board/$(BOARDDIR), but we can fully reuse the code from mpc8313erdb boards, and so to not duplicate the code we just symlink nand_spl/board/freescale/mpc8315erdb to mpc8313erdb. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> o silence make during ln echo o update documentation o and avoid: $ ./MAKEALL MPC8315ERDB_NAND Configuring for MPC8315ERDB board... sdram.o: In function `fixed_sdram': /home/r1aaha/git/u-boot/nand_spl/board/freescale/mpc8313erdb/sdram.c:72: undefined reference to `udelay' by renaming udelay -> __udelay in the spirit of commit 3eb90bad651fab39cffba750ec4421a9c01d60e7 "Generic udelay() with watchdog support". Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2009-12-21-0/+1
|\
| * TWL4030 Add usb PHY supportTom Rix2009-12-20-0/+1
| | | | | | | | | | | | | | | | | | | | The twl4030 provides a PHY device for connecting a link device, like musb, to physical connection. This change adds the twl4030 usb registers and functions for initializing the PHY as required by omap3. Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* | Update Makefile for tag generatingLi Yang2009-12-17-41/+7
|/ | | | | | Get tag directories from the $(__LIB) and also generate tag for .S files. Signed-off-by: Li Yang <leoli@freescale.com>
* Merge branch 'next' of ../nextWolfgang Denk2009-12-15-0/+9
|\
| * Merge branch 'master' of ../work into nextWolfgang Denk2009-12-07-1/+1
| |\
| * \ Merge branch 'master' into nextWolfgang Denk2009-12-07-0/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: lib_generic/zlib.c Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | arm: A320: Add support for Faraday A320 evaluation boardPo-Yu Chuang2009-11-27-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for A320 evaluation board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch. Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
| * | | TI DA8xx: Integrate DA830 EVM support into U-BootSekhar Nori2009-11-27-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Integrate DA830 EVM support into U-Boot. Provides initial support for TI OMAP-L137/DA830 SoC devices on a Spectrum Digital EVM board. See http://www.spectrumdigital.com/ Signed-off-by: Nick Thompson <nick.thompson@gefanuc.com>
| * | | mpc52xx: add support for the IPEK01 boardWolfgang Grandegger2009-10-31-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the board IPEK01 based on the MPC5200. The Futjitsu Lime graphics controller is configured in 16 bpp mode. Signed-off-by: Wolfgang Grandegger <wg@denx.de>
* | | | Update CHANGELOG; prepare Prepare v2009.11v2009.11Wolfgang Denk2009-12-15-1/+1
| |_|/ |/| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Update CHANGELOG, prepare -rc2v2009.11-rc2Wolfgang Denk2009-12-07-1/+1
| |/ |/| | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Fix out-of-tree building of "apollon" board.Wolfgang Denk2009-12-06-0/+1
|/ | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup; update CHANGELOG, prepare -rc1v2009.11-rc1Wolfgang Denk2009-10-28-2/+2
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master-sync' of git://git.denx.de/u-boot-armWolfgang Denk2009-10-24-0/+12
|\
| * TI OMAP3 SDP3430: Initial SupportTom Rix2009-10-24-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Start of support of Texas Instruments Software Development Platform(SDP) for OMAP3430 - SDP3430 Highlights of this platform are: Flash Memory devices: Sibley NOR, Micron 8bit NAND and OneNAND Connectivity: 3 UARTs and expanded 4 UART ports + IrDA Ethernet, USB Other peripherals: TWL5030 PMIC+Audio+Keypad VGA display Expansion ports: Memory devices plugin boards (PISMO) Connectivity board for GPS,WLAN etc. Completely configurable boot sequence and device mapping etc. Support default jumpering and: - UART1/ttyS0 console(legacy sdp3430 u-boot) - UART3/ttyS2 console (matching other boards, and SDP HW docs) - Ethernet - mmc0 - NOR boot Currently the UART1 is enabled by default. for compatibility with other OMAP3 u-boot platforms, enable the #define of CONSOLE_J9. Conflicts: Makefile Fixed the conflict with smdkc100_config by moving omap_sdp3430_config to it is alphabetically sorted location above zoom1. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
| * TI: DaVinci: DM355 Leopard board supportSandeep Paulraj2009-10-18-0/+3
| | | | | | | | | | | | | | This patch adds support for the leopard board which is based on the DM355 SOC. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * TI DaVinci DM646x: Adding initial support for DM6467 EVMSandeep Paulraj2009-10-18-0/+3
| | | | | | | | | | | | | | This patch adds the initial support for DM6467 EVM. Other features like NET and NAND support will be added as follow up patches. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * s5pc1xx: add support SMDKC100 boardMinkyu Kang2009-10-13-0/+3
| | | | | | | | | | | | | | Adds new board SMDKC100 that uses s5pc100 SoC Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com>
* | new default shortcut to config & build a boardMike Frysinger2009-10-18-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The majority of the time that I build things in U-Boot, I want to just build for the board. I don't make board config tweaks after selecting the board. So add a new pattern rule that allows people to combine two steps in one go: `make foo_config && make` => `make foo` This shouldn't conflict with any existing make rules as the pattern rule is used only the rule doesn't already exist. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | ppc/P1_P2_RDB: On-chip BootROM supportDipen Dudhat2009-10-16-1/+9
| | | | | | | | | | | | | | | | | | On Chip BootROM support for P1 and P2 series RDB platforms. This patch is derived from latest On Chip BootROM support on MPC8536DS Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | ppc/P1_P2_RDB: NAND Boot SupportDipen Dudhat2009-10-16-1/+5
|/ | | | | | | | | NAND Boot support for P1 and P2 series RDB platforms. This patch is derived from NAND Boot support on MPC8536DS. Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Support for the OpenRD base boardSimon Kagstrom2009-10-13-0/+3
| | | | | | | The implementation is borrowed from the sheevaplug board and the Marvell 1.1.4 code. Unsupported (or untested) is the SD card, PCIe and SATA. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
* Add support for Eukrea CPU9260/CPU9G20 SBCTom Rix2009-10-13-0/+8
| | | | | | | | | these boards are built around Atmel's AT91SAM9260/9G20 and have up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND and include a 10/100 Ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* Add support for Eukrea CPUAT91 SBCTom Rix2009-10-13-0/+6
| | | | | | | | | CPUAT91 is built around Atmel's AT91RM9200 and has up to 16MB of NOR flash, up to 128MB of SDRAM, and includes a Micrel KS8721 PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-09-30-0/+3
|\
| * On-chip ROM boot: MPC8536DS supportMingkai Hu2009-09-30-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8536E is capable of booting from the on-chip ROM - boot from eSDHC and boot from eSPI. When power on, the porcessor excutes the ROM code to initialize the eSPI/eSDHC controller, and loads the mian U-Boot image from the memory device that interfaced to the controller, such as the SDCard or SPI EEPROM, to the target memory, e.g. SDRAM or L2SRAM, then boot from it. The memory device should contain a specific data structure with control word and config word at the fixed address. The config word direct the process how to config the memory device, and the control word direct the processor where to find the image on the memory device, or where copy the main image to. The user can use any method to store the data structure to the memory device, only if store it on the assigned address. The on-chip ROM code will map the whole 4GB address space by setting entry0 in the TLB1, so the main image need to switch to Address space 1 to disable this mapping and map the address space again. This patch implements loading the mian U-Boot image into L2SRAM, so the image can configure the system memory by using SPD EEPROM. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * NAND boot: MPC8536DS supportMingkai Hu2009-09-30-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MPC8536E can support booting from NAND flash which uses the image u-boot-nand.bin. This image contains two parts: a 4K NAND loader and a main U-Boot image. The former is appended to the latter to produce u-boot-nand.bin. The 4K NAND loader includes the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL. The main U-Boot image just like a general U-Boot image except the parts that included by CONFIG_SYS_RAMBOOT. When power on, eLBC will automatically load from bank 0 the 4K NAND loader into the FCM buffer RAM where CPU can execute the boot code directly. In the first stage, the NAND loader copies itself to RAM or L2SRAM to free up the FCM buffer RAM, then loads the main image from NAND flash to RAM or L2SRAM and boot from it. This patch implements the NAND loader to load the main image into L2SRAM, so the main image can configure the RAM by using SPD EEPROM. In the first stage, the NAND loader copies itself to the second to last 4K address space, and uses the last 4K address space as the initial RAM for stack. Obviously, the size of L2SRAM shouldn't be less than the size of the image used. If so, the workaround is to generate another image that includes the code to configure the RAM by SPD and load it to L2SRAM first, then relocate the main image to RAM to boot up. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2009-09-30-5/+4
|\ \
| * | Refactor OneNAND IPL codeKyungmin Park2009-09-28-5/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Refactoring the OneNAND IPL code and some minor fixed: - Remove unnecessary header file - Fix wrong access at read interrupt - The recent OneNAND has 4KiB pagesize Also Board can override OneNAND IPL image Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | sbc8349: tidy up Makefile to use new configuration script.Paul Gortmaker2009-09-25-14/+1
|/ | | | | | | | | | Commit 804d83a5 allows us to move all the configuration variation tweaks out of the top level Makefile and down into the board config header. This takes advantage of that for the sbc8349 board. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* sbc85x0: tidy up Makefile to use new configuration script.Paul Gortmaker2009-09-24-16/+2
| | | | | | | | | | | | | Commit 804d83a5 allows us to move all the configuration variation tweaks out of the top level Makefile and down into the boards config header. This takes advantage of that for the sbc8540/sbc8560 boards. There were a couple of cheezy comments pointing at incorrect files, or files that don't exist, so I've cleaned those up too. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* sbc8548: allow enabling PCI via a make config optionPaul Gortmaker2009-09-24-2/+6
| | | | | | | | | | | | | | Prior to this commit, to enable PCI, you had to go manually edit the board config header, and if you had 33MHz PCI, you had to manually change CONFIG_SYS_NS16550_CLK too, which was not real user friendly, This adds the typical PCI and clock speed make targets to the toplevel Makefile in accordance with what is being done with other boards (i.e. using the "-t" to mkconfig). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Simplify the top makefile for P1_P2_RDB boardsKumar Gala2009-09-24-18/+4
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Simplify the top makefile for 36-bit config for P2020DSKumar Gala2009-09-24-6/+1
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Simplify the top makefile for 36-bit config for MPC8572DSKumar Gala2009-09-24-6/+1
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-11-10 22:12:32 +0000