summaryrefslogtreecommitdiff
path: root/Makefile
Commit message (Collapse)AuthorAgeLines
* [ARM] TI DaVinci support, hopefully finalSergey Kubushyn2007-08-10-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de>
* Merge with git+ssh://atlas/home/wd/git/u-boot/masterWolfgang Denk2007-08-09-0/+1
|\
| * Merge with /home/wd/git/u-boot/workWolfgang Denk2007-08-09-0/+1
| |\
| | * Treat ppc64 host as ppcKumar Gala2007-08-09-0/+1
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-08-07-55/+86
|\ \ \ | |/ /
| * | Merge with /home/tur/git/u-boot#cm5200-siWolfgang Denk2007-08-07-7/+2
| |\ \ | | |/ | |/|
| | * cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.Bartlomiej Sieka2007-08-03-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability for modules from the Schindler cm5200 family to use a single U-Boot image: - rename cm1_qp1 to cm5200 - add run-time module detection - parametrize SDRAM configuration according to the module we are running on Few minor, board-specific fixes included in this patch: - better MAC address handling - updated default environment ('update' command uses +{filesize} now) - improved error messages in the auto-update code - allow booting U-Boot from RAM (CFG_RAMBOOT) Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-08-06-0/+1
| |\ \
| | * | Configurations for ATI video card BIOS emulatorJason Jin2007-08-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add definition of the BIOS emulator and the ATI framebuffer driver for MPC8641HPCN board. Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
| * | | Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-08-06-51/+54
| |\ \ \ | | |/ / | | | / | | |/ | |/|
| | * Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk2007-08-06-3/+8
| | |\
| | | * Merge branch 'testing' into workingAndy Fleming2007-08-03-8/+8
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: CHANGELOG fs/fat/fat.c include/configs/MPC8560ADS.h include/configs/pcs440ep.h net/eth.c
| | * | | Minor cleanup of <board>_nand build rules.Wolfgang Denk2007-08-02-9/+6
| | | | |
| | * | | Fix build errors and warnings / code cleanup.Wolfgang Denk2007-08-02-34/+40
| | | |/ | | |/| | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * | Fix Makefile to use $(MKCONFIG) macro for all board portsGrant Likely2007-07-04-8/+8
| | | | | | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | [ADS5121] Support for the ADS5121 boardRafal Jaworowski2007-07-27-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following MPC5121e subsystems are supported: - low-level CPU init - NOR Boot Flash (common CFI driver) - DDR SDRAM - FEC - I2C - Watchdog Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Rafal Jaworowski <raj@semihalf.com> Signed-off-by: Jan Wrobel <wrr@semihalf.com>
| * | | [PCS440EP] - fix compile error, if BUILD_DIR is usedHeiko Schocher2007-07-14-1/+1
| | | |
| * | | Merge with /home/tur/git/u-boot#cm1_qp1Wolfgang Denk2007-07-12-0/+8
| |\ \ \
| | * | | CM1.QP1: Support for the Schindler CM1.QP1 board.Bartlomiej Sieka2007-07-11-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | | | [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failedHeiko Schocher2007-07-11-1/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | - now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher <hs@denx.de>
| * | | Merge with /home/hs/Atronic/u-bootWolfgang Denk2007-07-09-3/+6
| |\ \ \ | | |/ / | |/| |
| | * | [PCS440EP] upgrade the PCS440EP board:Heiko Schocher2007-06-22-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
| * | | Merged POST framework with the current TOT.Sergei Poselenov2007-07-05-0/+2
| | |/ | |/| | | | | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
| * | [ppc4xx] Add initial lwmon5 board supportStefan Roese2007-06-15-0/+3
| |/ | | | | | | | | | | | | This patch adds initial support for the Liebherr lwmon5 board euqipped with an AMCC 440EPx PowerPC. Signed-off-by: Stefan Roese <sr@denx.de>
| * Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk2007-06-06-3/+0
| |\
| | * Merge branch 'mpc8641'Jon Loeliger2007-06-05-3/+0
| | |\
| | | * mpc8641 image size cleanupEd Swarthout2007-06-05-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e600 does not have a bootpg restriction. Move the version string to beginning of image at fff00000. Resetvec.S is not needed. Update flash copy instructions. Add tftpflash env variable Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | Merge with /home/wd/git/u-boot/custodian/u-boot-armWolfgang Denk2007-06-06-1/+4
| |\ \ \
| | * \ \ Merge with git://www.denx.de/git/u-boot.gitPeter Pearse2007-05-18-0/+13
| | |\ \ \
| | * | | | Makefile permissionsPeter Pearse2007-05-18-0/+0
| | | | | |
| | * | | | New board SMN42 branchPeter Pearse2007-05-09-1/+4
| | | | | |
| | * | | | Makefile permissionsPeter Pearse2007-05-09-0/+0
| | | |/ / | | |/| |
| * | | | Merge with /home/stefan/git/u-boot/acadia-nand-bootStefan Roese2007-06-06-0/+9
| |\ \ \ \
| | * | | | ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval boardStefan Roese2007-06-06-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds NAND booting support for the AMCC Acadia eval board. Please make sure to configure jumper J7 to position 2-3 when booting from NOR, and to position 1-2 when booting for NAND. I also added a board command to configure the I2C bootstrap EEPROM values. Right now only 267MHz is support for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 267 nor ;to configure the board for 267MHz NOR booting => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-06-06-2/+19
|\ \ \ \ \ \ | |/ / / / /
| * | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk2007-06-04-0/+9
| |\ \ \ \ \ | | |/ / / /
| | * | | | Merge with /home/stefan/git/u-boot/bamboo-nandStefan Roese2007-06-01-0/+9
| | |\ \ \ \ | | | |_|/ / | | |/| | |
| | | * | | ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval boardStefan Roese2007-06-01-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds NAND booting support for the AMCC Bamboo eval board. Since the NAND-SPL boot image is limited to 4kbytes, this version only supports the onboard 64MBytes of DDR. The DIMM modules can't be supported, since the setup code for I2C DIMM autodetection and configuration is too big for this NAND bootloader. Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | | Merge with /home/wd/git/u-boot/stx-gp3ssaWolfgang Denk2007-05-31-2/+10
| |\ \ \ \ \ | | |/ / / / | |/| | | |
| | * | | | Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.Wolfgang Denk2007-05-31-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | | | Merge git://www.denx.de/git/u-boot into 2007_05_15-testingMarkus Klotzbuecher2007-05-29-0/+13
|\ \ \ \ \ \ | |/ / / / /
| * | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xxWolfgang Denk2007-05-16-0/+13
| |\ \ \ \ \ | | |_|_|/ / | |/| | | |
| | * | | | mpc83xx: minor fixups for 8313rdb introductionKim Phillips2007-04-25-13/+13
| | | | | |
| | * | | | mpc83xx: Add MPC8313ERDB support.Scott Wood2007-04-23-0/+13
| | | |_|/ | | |/| | | | | | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
* | | | | Merge with git://www.denx.de/git/u-boot.gitMarkus Klotzbuecher2007-05-07-1/+12
|\ \ \ \ \ | |/ / / /
| * | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk2007-05-05-0/+6
| |\ \ \ \
| | * | | | Add support for the 8568 MDS boardAndy Fleming2007-05-02-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This included some changes to common files: * Add 8568 processor SVR to various places * Add support for setting the qe bus-frequency value in the dts * Add the 8568MDS target to the Makefile Signed-off-by: Andy Fleming <afleming@freescale.com>
| | * | | | Enable 8544 supportAndy Fleming2007-04-23-0/+3
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add support to the Makefile * Add 8544 configuration support to the tsec driver * Add 8544 SVR numbers to processor.h Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-05-05-0/+3
| |\ \ \ \ | | | |/ / | | |/| |
| | * | | Add support for STX GP3SSA (stxssa) BoardDan Malek2007-05-03-0/+3
| | |/ / | | | | | | | | | | | | Signed-off-by Dan Malek, <dan@embeddedalley.com>
generated by cgit v1.1 at 2024-11-16 02:13:16 +0000