summaryrefslogtreecommitdiff
path: root/MAKEALL
Commit message (Collapse)AuthorAgeLines
* mpc83xx: fix mpc8313 in-tree building with NANDNick Spence2008-09-03-1/+1
| | | | | | | and add mpc8313 NAND build to MAKEALL Signed-off-by: Nick Spence <nick.spence@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2008-09-01-0/+1
|\
| * ARM: Add support for S3C6400 based SMDK6400 boardGuennadi Liakhovetski2008-08-31-0/+1
| | | | | | | | | | | | | | | | | | SMDK6400 can only boot U-Boot from NAND-flash. This patch adds a nand_spl driver for it too. The board can also boot from the NOR flash, but due to hardware limitations it can only address 64KiB on it, which is not enough for U-Boot. Based on the original sources by Samsung for U-Boot 1.1.6. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* | sh: Add support sh2 to MAKEALLNobuhiro Iwamatsu2008-08-31-1/+1
| | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Renesas Solutions AP325RXA board supportNobuhiro Iwamatsu2008-08-31-0/+2
| | | | | | | | | | | | | | | | | | AP325RXA is SH7723's reference board. This has SCIF, NOR Flash, Ethernet, USB host, LCDC, SD Host, Camera and other. In this patch, support SCIF, NOR Flash, and Ethernet. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Renesas RSK+ 7203 board supportNobuhiro Iwamatsu2008-08-31-0/+3
| | | | | | | | | | | | | | This adds initial support for the RTE RSK+ SH7203 board. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Renesas R0P7785LC0011RL board supportNobuhiro Iwamatsu2008-08-31-0/+1
|/ | | | | | | | | | | | | | This board has SH7785, 512MB DDR2-SDRAM, NOR Flash, Graphic, Ethernet, USB, SD, RTC, and I2C controller. This patch supports the following functions: - 128MB DDR2-SDRAM (29-bit address mode only) - NOR Flash - USB host - Ethernet Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* mpc85xx: Add support for the MPC8536DS reference boardKumar Gala2008-08-27-0/+1
| | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dejan Minic <minic@freescale.com> Signed-off-by: Jason Jin <Jason.jin@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc85xx: Add support for the MPC8572DS reference boardKumar Gala2008-08-27-0/+1
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* remove MVS1 boardAndre Schwarz2008-08-26-1/+0
| | | | | | MVS1 board has reached end-of-life and can be removed completely. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
* Merge branch 'next' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-08-20-0/+3
|\ | | | | | | | | | | Conflicts: MAINTAINERS
| * Merge branch 'mimc200' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-08-20-0/+1
| |\ | | | | | | | | | | | | | | | | | | Conflicts: MAKEALL Makefile
| | * avr32: Add MIMC200 boardMark Jackson2008-08-20-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The MIMC200 board is based on Atmel's NGW100 dev kit, but with an extra 8MByte FLASH and 128KByte FRAM. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | Merge branch 'favr-32' of git://git.denx.de/u-boot-avr32Haavard Skinnemoen2008-08-06-0/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: MAINTAINERS MAKEALL Makefile
| | * | avr32: add support for EarthLCD Favr-32 boardHans-Christian Egtvedt2008-08-06-0/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Favr-32 board made by EarthLCD. This kit, which is also called ezLCD-101 when running with EarthLCD firmware, has a 10.4" touch screen LCD panel, 16 MB 32-bit SDRAM, 8 MB parallel flash, Ethernet, audio out, USB device, SD-card slot, USART and various other connectors for cennecting stuff to SPI, I2C, GPIO, etc. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | Add support for the hammerhead (AVR32) boardJulien May2008-07-30-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. It offers versatile peripherals, such as ethernet, usb device, usb host etc. The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered Device (PD). Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which will cover even the most exceptional need of memory bandwidth. Together with the onboard video decoder the board is ready for video processing. For more information see: http:///www.miromico.com/hammerhead Signed-off-by: Julien May <mailinglist@miromico.ch> [haavard.skinnemoen@atmel.com: various small fixes and adaptions] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * Removed support for the adsvix board.Adrian Filipi2008-07-30-1/+0
| | | | | | | | | | | | | | | | Support for the adsvix was originally provided by Applied Data Systems (ADS), inc., now EuroTech, Inc. The board never shipped aside from some sample boards. Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
* | ColdFire: Add M54451EVB platform support for MCF5445xTsiChung Liew2008-08-14-0/+1
| | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | ColdFire: Add M5253DEMO platform support for MCF5253TsiChung Liew2008-08-14-0/+1
| | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* | Fix merge problemsStefan Roese2008-08-06-1/+0
| | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: ML507: U-Boot in flash and System ACERicardo Ribalda Delgado2008-07-30-0/+1
| | | | | | | | | | | | | | | | This patch allows booting from FLASH the ML507 board by Xilinx. Previously, U-Boot needed to be loaded from JTAG or a Sytem ACE CF Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
* | ppc4xx: ML507 Board SupportRicardo Ribalda Delgado2008-07-18-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Xilinx ML507 Board is a Virtex 5 prototyping board that includes, among others: -Virtex 5 FX FPGA (With a ppc440x5 in it) -256MB of SDRAM2 -32MB of Flash -I2C Eeprom -System ACE chip -Serial ATA connectors -RS232 Level Conversors -Ethernet Transceiver This patch gives support to a standard design produced by EDK for this board: ppc440, uartlite, xilinx_int and flash - Includes Changes propossed by Stefan Roese and Michal Simek Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Acked-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese2008-07-17-0/+1
|\ \ | |/
| * mpc5xxx: Add MVBC_P board supportAndre Schwarz2008-07-15-0/+1
| | | | | | | | | | | | | | | | The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet controller (using e1000) and custom Altera Cyclone-II FPGA on PCI. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | Merge branch 'master' of /home/stefan/git/u-boot/u-boot into nextStefan Roese2008-07-14-12/+2
|\ \ | |/
| * Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk2008-07-13-1/+1
| |\
| | * ColdFire: Fix incorrect board name in MAKEALL for M5253EVBETsiChung Liew2008-07-11-1/+1
| | | | | | | | | | | | Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
| * | MAKEALL: remove duplicated at91 from ARM9 list and add LIST_at91 to armJean-Christophe PLAGNIOL-VILLARD2008-07-10-11/+1
| |/ | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | ppc4xx: Initial framework of the AMCC PPC460SX redwood reference board.Feng Kan2008-07-11-0/+1
|/ | | | | | | | | | Add AMCC Redwood reference board that uses the latest PPC 464 CPU processor combined with a rich mix of peripheral controllers. The board will support PCIe, mutiple Gig ethernet ports, advanced hardware RAID assistance and IEEE 1588. Signed-off-by: Feng Kan <fkan@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* sh: Fix SH-boards compile errorNobuhiro Iwamatsu2008-07-08-1/+1
| | | | | | | | | By Cleanup out-or-tree building for some boards (.depend) (commit:c8a3b109f07f02342d097b30908965f7261d9f15) because filse ware changed, some SH-boards have compile error. I revised this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)Hugo Villeneuve2008-06-28-0/+1
| | | | | | | | | This patch adds support for the Lyrtech SFF-SDR board, based on the TI DaVinci architecture (ARM926EJS). Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: Philip Balister <philip@balister.org> Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-shWolfgang Denk2008-06-11-0/+1
|\
| * sh: Renesas Solutions SH7763RDP board supportNobuhiro Iwamatsu2008-06-09-0/+1
| | | | | | | | | | | | | | | | SH7763RDP has SCIF, NOR Flash, Ethernet, USB host, LCDC and MMC. In this patch, support SCIF, NOR Flash, and Ethernet. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2008-06-11-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | Conflicts: include/asm-ppc/fsl_lbc.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | TQM8548: Basic support for the TQM8548 modulesWolfgang Grandegger2008-06-11-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | This patch adds basic support for the TQM8548 module from TQ-Components (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for eTSEC 3 and 4 Furthermore Flash buffer write has been enabled to speed up output to the Flash by approx. a factor of 10. Signed-off-by: Thomas Waehner <thomas.waehner@tqs.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
* | add MPC8343 based board mvBlueLYNX-M7 (board+make files)Andre Schwarz2008-06-10-0/+1
|/ | | | | | | | | Add MPC8343 based board mvBlueLYNX-M7. It's a single board stereo camera system. Please read doc/README.mvblm7 for details. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge remote branch 'u-boot-at91/for-1.3.4'Wolfgang Denk2008-06-03-1/+22
|\
| * MAKEALL: add at91 listJean-Christophe PLAGNIOL-VILLARD2008-05-24-1/+19
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * Merging Stelian Pop AT91 patchesJean-Christophe PLAGNIOL-VILLARD2008-05-24-0/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge branch 'testing-V2' Conflicts: board/atmel/at91cap9adk/Makefile Fixing copyright board/atmel/at91sam9260ek/Makefile Fixing copyright board/atmel/at91sam9260ek/u-boot.lds Delete no more needed ld script Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9RLEK supportStelian Pop2008-05-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9263EK supportStelian Pop2008-05-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9261EK supportStelian Pop2008-05-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | Merge remote branch 'u-boot-avr32/master'Wolfgang Denk2008-06-03-0/+1
|\ \ \
| * | | avr32: Add support for the ATSTK1006 boardHaavard Skinnemoen2008-05-27-0/+1
| |/ / | | | | | | | | | | | | | | | | | | This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on board. It's currently in production and will be available soon. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | | Merge remote branch 'u-boot-ppc4xx/master'Wolfgang Denk2008-06-02-0/+1
|\ \ \ | |/ / |/| |
| * | Merge branch 'quad100hd'Stefan Roese2008-05-21-0/+1
| |\ \
| | * | ppc4xx: Add the Harris QUAD100HD AMCC 405EP-based boardGary Jennejohn2008-05-08-0/+1
| | |/ | | | | | | | | | | | | Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | | Initial support for "Socrates" boardSergei Poselenov2008-05-20-0/+1
|/ / | | | | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* | TQM8272: fix out-of-tree buildingWolfgang Denk2008-05-15-0/+1
|/ | | | | | ...and add to MAKEALL script Signed-off-by: Wolfgang Denk <wd@denx.de>
* MAKEALL: add inka4x0 boardWolfgang Denk2008-05-05-0/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>