summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
* ARM: imx6ul: Add support for liteSOMMarcin Niestroj2016-12-16-0/+231
| | | | | | | | | | | | | | | | liteSOM is a System On Module (http://grinn-global.com/litesom/). It can't exists on its own, but will be used as part of other boards. Hardware specification: * NXP i.MX6UL processor * 256M or 512M DDR3 memory * optional eMMC (uSDHC2) Here we treat SOM similar to SOC, so we place it inside arch/arm/mach-* directory and make it possible to reuse initialization code (i.e. DDR, eMMC init) for all boards that use it. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
* udoo_neo: Add Ethernet supportBreno Lima2016-12-16-2/+112
| | | | | | | | UDOO Neo boards has one FEC port connected to KSZ8091, add support for it. Tested on a UDOO Neo Full with "dhcp zImage" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add PFUZE300 PMIC supportBreno Lima2016-12-16-0/+156
| | | | | | | | UDOO Neo boards has a PFUZE300 connected to I2C1 bus. Tested on a UDOO Neo Full with "pmic PFUZE3000 dump" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* power: pmic: Add Voltage configuration macroBreno Lima2016-12-16-0/+5
| | | | | | | Add pfuze3000 voltage configuration macro for SW1AB, SW3 and VLDO1/2 according to tables 53, 57 and 62 on PF3000 datasheet. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add thermal supportBreno Lima2016-12-16-0/+4
| | | | | | | Add thermal support on the Kconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove console optionBreno Lima2016-12-16-1/+0
| | | | | | | It's not necessary to define the console option as we use the distro config. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove mmcautodetect optionBreno Lima2016-12-16-1/+0
| | | | | | | It's not necessary to define the mmcautodetect as it is not used anywhere. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Staticize board_string()Breno Lima2016-12-16-1/+1
| | | | | | | Change board_string() function to static because it's being used locally. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Move MX6SX configuration to KconfigBreno Lima2016-12-16-1/+2
| | | | | | | | | It's not necessary to define the processor in the defconfig file. The preferred method to select the SoC is via Kconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove USDHC3 supportBreno Lima2016-12-16-89/+6
| | | | | | | | It's not necessary to support USDHC3 in U-Boot as it's being used for the WLAN. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* arm: imx: initial support for colibri imx6Max Krummenacher2016-12-16-0/+2449
| | | | | | | | This adds board support for the Toradex module family Colibri iMX6. The familiy consists of a module with i.MX6 DualLite, i.MX6 Solo, both with a version for commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* arm: imx: initial support for apalis imx6Max Krummenacher2016-12-16-0/+2691
| | | | | | | | This adds board support for the Toradex module family Apalis iMX6. The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* ARM: dts: vf: Fix warning about missing reg propertyStefan Agner2016-12-16-0/+2
| | | | | | | | | Add proper reg values for the two AIPS bus nodes. This avoids this two warnings: Node /soc/aips-bus@40000000 has a unit name, but no reg property Node /soc/aips-bus@40080000 has a unit name, but no reg property Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* colibri_vf: use same NAND clock as Linux usesStefan Agner2016-12-16-1/+1
| | | | | | | | | | | | | | | | Currently a divider of 6 has been used, leading to following NAND Flash Controller (NFC) clocks: VF61: 27.7 MHz (166.7MHz bus clock) VF50: 22 MHz (132MHz bus clock) The NAND Flash Memory used on VF50 allows to use clock speed of up to 33MHz, while the Flash Memory of VF61 allows 50MHz. We can use the same divider of 4 on both modules to configure the maximal possible clock speeds: VF61: 41.7 MHz VF50: 33 MHz Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* colibri_vf: cleanup USB clock initializationStefan Agner2016-12-16-4/+10
| | | | | | | | | Use the same preprocessor define to enable clocks as we use to enable the driver. Make sure that the necessary PLL's are on (they get enabled by boot ROM by default, so this is more for completness). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* colibri_vf: use device-tree for MTD partitionsStefan Agner2016-12-16-0/+13
| | | | | | | | Use device-tree fixup to communicate the MTD partitions to the kernel. U-Boot's mtdparts environment variable will be used as partition source for the device-tree based partition table too. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* toradex: allow custom fdt board setup in board fileStefan Agner2016-12-16-5/+53
| | | | | | | | | | The config block support currently uses the ft_board_setup function to patch the device tree with config block information. However, this does not allow to patch the device tree with board specific information. Rename the common setup function to ft_common_board_setup and use the call it from the board files directly. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* toradex: fix USB Download gadget fixup callbackStefan Agner2016-12-16-2/+2
| | | | | | | Use the proper config option to guard the USB Download Function fixup callback. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2016-12-16-3765/+9059
|\
| * MAINTAINERS: DFU: Change e-mail address for DFU maintainerLukasz Majewski2016-12-12-1/+1
| | | | | | | | | | | | | | Despite I leave Samsung by the end of the year, I'm going to maintain DFU in u-boot. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| * MAINTAINERS: ONENAND: MTD: Mark Samsung's OneNAND as orphanedLukasz Majewski2016-12-12-2/+2
| | | | | | | | | | | | | | | | | | Since I leave Samsung by the end of the year, I will not have access to OneNAND devices anymore. Hence the custodian position has been marked as "Orphaned". Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| * Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-12-12-64/+1800
| |\
| | * arm64: mvebu: Enable hush parser in A8K default configurationKonstantin Porotchkin2016-12-12-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable hush parser in Armada-7040 and Armada-8040 DB default configurations. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: Enable PCIe support in Armada-7040 configurationKonstantin Porotchkin2016-12-12-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable PCIe bus support in Armada-7040 DB default configuration Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: Add L3 cache flush functionality to A8K familyKonstantin Porotchkin2016-12-12-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing L3 cache flush functionality which absence prevents Linux kernel from normal boot in case the L3 cache is enabled by ATF. The L3 cache is named the "last level" cache in order to keep the terminology similar to the ATF code. This cache should not be disabled by u-boot since the Linux kernel cannot activate it, so it is activates at ATF stage. However the cache flush is required for preventing data corruption after disabling the MMU and the data cache before passing control to the loaded Linux image. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: Enable pin control support in A8K default configKonstantin Porotchkin2016-12-12-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable mvebu pin control support in the default configuration files for Armada-7040 and Armada-8040 development boards Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: Enable BUBT command support in A8K default configKonstantin Porotchkin2016-12-12-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable mvebu "bubt" command support in the default configuration file for Armada-7040 and Armada-8040 development boards Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: Add pin control nodes to A8K family DTS filesKonstantin Porotchkin2016-12-12-22/+183
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pin control nodes to APN806, CP-master, CP-slave and Armada-7040 and Armada-8040 boards DTS files Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: pinctrl: Add pin control driver for A8K familyKonstantin Porotchkin2016-12-12-0/+651
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a DM port of Marvell pin control driver. The A8K SoC family contains several silicone dies interconnected in a single package. Every die is normally equipped with its own pin controller unit. There are 2 pin controllers in A70x0 SoC and 3 in A80x0 SoC. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: Add bubt command for flash image burnKonstantin Porotchkin2016-12-12-0/+896
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for mvebu bubt command for flash image load, check and burn on boot device. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * arm64: mvebu: Modify the A8K SPI and I2C config in DTSKonstantin Porotchkin2016-12-12-67/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Align the Armada-8040-db and Armada-7040-db SPI and I2C DTS settings with latest DB settings: - 8040-db: disable i2c0 and spi0 on AP (MPPs are reserved for SDIO) - 8040-db: disable cps_i2c0 on CP1 - 8040-db: enable spi1 on CP1 (the new location of the boot flash) The spi1 on CP1 is aliased as spi0 since this is the way the driver enumerates it. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-12-12-1857/+2697
| |\ \
| | * | ARM: uniphier: remove BLK selectMasahiro Yamada2016-12-11-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a user configurable option, but "select BLK" forces users to enable it. Even with this commit, BLK is still enabled by "default y if DM_MMC" for UniPhier SoCs; the difference is users can disable it if they do not need it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| | * | ARM: dts: uniphier: sync Device Tree with LinuxMasahiro Yamada2016-12-11-1851/+2684
| | | | | | | | | | | | | | | | | | | | | | | | Sync with the latest kernel. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| | * | ARM: uniphier: disable CONFIG_ARCH_FIXUP_FDT_MEMORYMasahiro Yamada2016-12-10-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not overwrite the memory nodes in the kernel DT where some parts of the memory region might be carved out. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| | * | ARM: uniphier: remove unneeded parenthesesMasahiro Yamada2016-12-10-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Just a cosmetic cleanup. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| | * | ARM: uniphier: remove unneeded initializerMasahiro Yamada2016-12-10-2/+4
| | |/ | | | | | | | | | | | | | | | This will be used to store the return value of readl(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | imgtec: Update MAINTAINERS for more config filesTom Rini2016-12-09-1/+6
| | | | | | | | | | | | | | | | | | Cover all of the boston and malta variations. Signed-off-by: Tom Rini <trini@konsulko.com>
| * | arm: am33xx: Initialize EMIF REG_PR_OLD_COUNT for BBB and am335x-evmJyri Sarha2016-12-09-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize EMIF OCP_CONFIG registers REG_COS_COUNT_1, REG_COS_COUNT_2, and REG_PR_OLD_COUNT field for Beaglebone-Black and am335x-evm. With the default values LCDC suffers from DMA FIFO underflows and frame synchronization lost errors. The initialization values are the highest that work flawlessly when heavy memory load is generated by CPU. 32bpp colors were used in the test. On BBB the video mode used 110MHz pixel clock. The mode supported by the panel of am335x-evm uses 30MHz pixel clock. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | calimain: Update maintainers and their email addressesChristian Riesch2016-12-09-2/+2
| | | | | | | | | | | | | | | | | | Signed-off-by: Christian Riesch <christian@riesch.at> Cc: Manfred Rudigier <manfred.rudigier@omicronenergy.com> Cc: Christoph Rüdisser <christoph.ruedisser@omicronenergy.com>
| * | travis-ci: Switch to building QEMUTom Rini2016-12-09-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | First, there are a number of features in newer QEMU that will allow us to test a wider range of platforms, so we want to use at least v2.8.0. Second, making use of a PPA for QEMU fails from time to time. So we change to checking out and building a copy of QEMU when we know that we are going to use test.py and need QEMU to be installed. This adds around 4 minutes per test.py job that we run. Signed-off-by: Tom Rini <trini@konsulko.com>
| * | tools: mkimage: Use fstat instead of stat to avoid malicious hacksMichal Simek2016-12-09-8/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch is fixing: "tools: mkimage: Check if file is regular file" (sha1: 56c7e8015509312240b1ee15f2ff74510939a45d) which contains two issues reported by Coverity Unchecked return value from stat and incorrect calling sequence where attack can happen between calling stat and fopen. Using pair in opposite order (fopen and fstat) is fixing this issue because fstat is using the same file descriptor (FILE *). Also fixing issue with: "tools: mkimage: Add support for initialization table for Zynq and ZynqMP" (sha1: 3b6460809c2a28360029c1c48247648fac4455c9) where file wasn't checked that it is regular file. Reported-by: Coverity (CID: 154711, 154712) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | davinci: omapl138_lcdk: boot from zImageFabien Parent2016-12-09-4/+6
| | | | | | | | | | | | | | | | | | | | | Stop booting legacy uImage and now boot zImage. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | defconfigs: am57xx_hs_evm: Add default OPTEE load addressAndrew F. Davis2016-12-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we let U-Boot find a spot at the end of DRAM at runtime, this forces us to build an OPTEE image based on the size of DRAM for an EVM. Add a default address that works across all current AM57xx EVMs. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | defconfigs: dra7xx_hs_evm: Add default OPTEE load addressAndrew F. Davis2016-12-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we let U-Boot find a spot at the end of DRAM at runtime, this forces us to build an OPTEE image based on the size of DRAM for an EVM. Add a default address that works across all current DRA7xx EVMs. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | davinci: omapl138_lcdk: fix bad NAND ECC configFabien Parent2016-12-09-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The configuration used to error correction was not in line with what linux and the ROM code is using. Fix it by using the correct configuration. Now u-boot and the SPL are able to read correctly anything written by them. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | davinci: omapl138_lcdk: increase u-boot load sizeFabien Parent2016-12-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | A size of 0x200 seems way too short for u-boot. Increase the size to 512k. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | cmd: pci: add option to parse and display BAR informationYehuda Yitschak2016-12-09-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the PCI command only allows to see the BAR register values but not the size and actual base address. This little extension parses the BAR registers and displays the base, size and type of each BAR. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | spl: sandbox: Drop spl_board_announce_boot_device()Simon Glass2016-12-09-14/+3
| | | | | | | | | | | | | | | | | | This function is not used anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | spl: uniphier: Drop spl_board_announce_boot_device()Simon Glass2016-12-09-5/+0
| | | | | | | | | | | | | | | | | | This function is not used anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-19 11:58:56 +0000