summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7Steve Sakoman2010-07-05-43/+43
| | | | | | | | | | | | The purpose of this patch is to prepare for adding the OMAP4 architecture, which is Cortex A9 Cortex A8 and A9 both belong to the armv7 architecture, hence the name change. The two architectures are similar enough that substantial code can be shared. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP: mmc: add support for second and third mmc channelsSteve Sakoman2010-07-05-5/+49
| | | | | | | | | | | | | | This patch adds support for the second and third mmc channels on OMAP3 processors Boards wishing to use this feature should define CONFIG_SYS_MMC_SET_DEV in the board config Tested on Overo Signed-off-by: Steve Sakoman <steve@sakoman.com> Tested-by: Philip Balister <philip@opensdr.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Make sure that argv[] argument pointers are not modified.Wolfgang Denk2010-07-04-670/+671
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hush shell dynamically allocates (and re-allocates) memory for the argument strings in the "char *argv[]" argument vector passed to commands. Any code that modifies these pointers will cause serious corruption of the malloc data structures and crash U-Boot, so make sure the compiler can check that no such modifications are being done by changing the code into "char * const argv[]". This modification is the result of debugging a strange crash caused after adding a new command, which used the following argument processing code which has been working perfectly fine in all Unix systems since version 6 - but not so in U-Boot: int main (int argc, char **argv) { while (--argc > 0 && **++argv == '-') { /* ====> */ while (*++*argv) { switch (**argv) { case 'd': debug++; break; ... default: usage (); } } } ... } The line marked "====>" will corrupt the malloc data structures and usually cause U-Boot to crash when the next command gets executed by the shell. With the modification, the compiler will prevent this with an error: increment of read-only location '*argv' N.B.: The code above can be trivially rewritten like this: while (--argc > 0 && **++argv == '-') { char *arg = *argv; while (*++arg) { switch (*arg) { ... Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Redundant environment: move flag definitions to header fileWolfgang Denk2010-07-04-8/+3
| | | | | | | Instead of defining the flags sevaral times in different source files (which is error prone), move them to a central place in a header file. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Make *printf() return "int" instead of "void"Wolfgang Denk2010-07-04-12/+18
| | | | | | | | | | Change the return type of the *printf() functions to the standard "int"; no changes are needed but returning the already available length count. This will save a few additional strlen() calls later... Signed-off-by: Wolfgang Denk <wd@denx.de>
* exports.c: fix warning: 'dummy' defined but not usedWolfgang Denk2010-07-04-1/+1
| | | | | | | Also get rid of the #ifdef's while doing this. Suggested-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Wolfgang Denk <wd@denx.de>
* cmd_ide.c: fix unused variable warning for SC3 boardWolfgang Denk2010-07-04-1/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* shannon/INFERNO: fix special handling of environment configurationWolfgang Denk2010-07-04-19/+4
| | | | | | | | | | | Remove some INFERNO related #ifdef's from common environment code by fixing the board configuration settings (add CONFIG_ENV_SECT_SIZE). While we are at it, fix comment which incorrectly talks about 4 KB environment size, while it's actually 0x4000 = 16 KiB. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Rolf Offermanns <rof@sysgo.de>
* boards.cfg: fix ML2, am3517_evm and s5p_goni boardsWolfgang Denk2010-07-04-1/+3
| | | | | | | Fix board directory name for ML2 board, and add missing definitions for am3517_evm and s5p_goni boards. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-07-04-53/+1104
|\
| * ppc4xx: Add T3COPR board support (PPC460GT based)Stefan Roese2010-07-01-0/+990
| | | | | | | | | | | | | | This patch adds support for the T3CORP board, based on the AppliedMicro (APM) PPC460GT. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Cleanup Boot/FLASH TLB reassignment for PPC440/460Stefan Roese2010-07-01-15/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background Info: Some PPC440/460 boards have caches enabled in the Boot/FLASH TLB (via init.S) to speed up the boot process. In relocate_code (start.S) the cache inhibit attribute for this TLB is set to disable cache. This is needed for the CFI FLASH driver. This patch now cleans this code up: - CONFIG_SYS_TLB_FOR_BOOT_FLASH is defined to 0 (default TLB) if not defined in the top of this file. This way, we can remove an ugly #ifdef in this code. - Replace complex "#if defined(CONFIG_440EP) || defined(CONFIG_GR)..." statement with "#if defined(CONFIG_440)". - Remove unnecessary cache invalidate calls resulting in faster bootup. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Add DDR1/2 macros in ppc4xx-sdram.h for non-405EX as wellStefan Roese2010-07-01-1/+3
| | | | | | | | | | | | | | This patch adds some DDR(2) macros to all PPC4xx's equipped with this IBM DDR1/2 controller. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: DDR2: Complete RDSS configuration on non-SPD based boardsStefan Roese2010-07-01-14/+38
| | | | | | | | | | | | | | | | | | As described in item #10 of the SDRAM initialization (chapter 22.2.9 of the PPC460EX/EXr/GT users manual), RDSS may need to be adjusted. The code for this is now factored out and executed for non-SPD based boards as well. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Enable overwriting of default scan window for IBM DDR2 controllerStefan Roese2010-07-01-12/+10
| | | | | | | | | | | | | | | | | | | | | | This patch makes it possible to overwrite the default auto-calibration scan window (SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR] values) with board specific values. The parameters of the weak default function are corrected as well. This way we don't need the casts any more. This feature will be used by an upcoming PPC460GT board port. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Enable PCIe support without PCI support on PPC440/460Stefan Roese2010-07-01-1/+11
| | | | | | | | | | | | | | | | | | | | | | By not defining CONFIG_SYS_PCI_MASTER_INIT and CONFIG_SYS_PCI_TARGET_INIT, PCI support (host and adapter) will not be enabled. But it's still possible to use the U-Boot PCI infrastructure for the PCIe ports. This configuration option is needed for a new 460GT board, which uses PCIe but has PCI disabled. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Enable booting with Option E on 460EX/EXr/GTStefan Roese2010-07-01-10/+46
| | | | | | | | | | | | | | | | | | This patch enables booting with option E on the PPC460EX/EXr/GT. When booting with Option E, the PLL is in bypass, CPR0_PLLC[ENG]=0. The Software Boot Configuration Procedure is needed to engage the PLL and perform a chip reset. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'sf' of git://git.denx.de/u-boot-blackfinWolfgang Denk2010-07-04-16/+276
|\ \
| * | sf: move useful messages from debug to printfMike Frysinger2010-06-30-16/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment, the default SPI flash subsystem is quite terse. Errors and successes both result in a generic message. So move the useful errors and useful successes to printf output by default. While we're here, also convert the messages to use print_size(). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * | spi_flash: support old STMicro parts with RESThomas Chou2010-06-30-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | Some old STMicro parts do not support JEDEC ID (0x9f). This patch uses RES (0xab) to get Electronic ID and translates it to JEDEC ID. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Mike Frysinger <vapier@gentoo.org>
| * | add redundant environment for env_sf.cWolfgang Wegner2010-06-30-0/+232
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds redundant environment for environment in SPI flash. I took env_flash.c as an example and slightly modified it. Apart from adapting things to SF, I also slightly changed the decision logic to use area 2 as a default in case the flags are wrong because not having a default path worried me. I did not add a section for CONFIG_ENV_IS_IN_SPI_FLASH in environment.h because I did not understand if this is desired and/or needed. So to use the feature, one has to set CONFIG_ENV_OFFSET_REDUND _and_ CONFIG_SYS_REDUNDAND_ENVIRONMENT. I checked it by powering off my board several times during flash erase or write, because I do not know if there are other stress test scenarios. Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | drivers/usb/host/ohci-hcd: rename readl/writel to ohci_readl/ohci_writelBecky Bruce2010-06-30-80/+85
| | | | | | | | | | | | | | | | | | This avoids a build warning that you see if anyone in the header chain has included io.h (which is coming shortly). The previous code redefined readl/writel; this patch renames it to be specific to ohci. The defines are also moved from ohci-hcd.c to ohci.h. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
* | musb: Program extvbus for OMAP3EVM Rev >= EAjay Kumar Gupta2010-06-30-0/+20
| | | | | | | | | | | | | | | | OMAP3EVM Rev >=E uses external Vbus supply so setting 'extvbus' to '1' for OMAP3EVM Rev >=E runtime based on EVM revision. CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
* | omap3evm: Add board revision functionAjay Kumar Gupta2010-06-30-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added function to differentiate between the OMAP3EVM revisions. The chip-id of the ethernet PHY is being used for this purpose. Rev A to D : 0x01150000 Rev >= E : 0x92200000 CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Sandeep Paulraj <s-paulraj@ti.com>
* | musb: Add Phy programming for using external VbusAjay Kumar Gupta2010-06-30-1/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MUSB PHY on OMAP3EVM Rev >= E uses external Vbus supply to support 500mA of power.We need to program MUSB PHY to use external Vbus for this purpose. Adding 'extvbus' member in musb_config structure which should be set by all the boards where MUSB interface is using external Vbus supply. Also added ULPI bus control register read/write abstraction for Blackfin processor as it doesn't have ULPI registers. CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | musb: Use name based initialization for musb_configAjay Kumar Gupta2010-06-30-9/+9
| | | | | | | | | | | | | | | | | | | | | | Changed musb_config initialization for omap3.c, davinci.c and da8xx.c using name of structure fields. This would cause the uninitialized field to be null by default and thus would help in avoiding to init some flags required to be set only for a few selected platforms. CC: Remy Bohmer <linux@bohmer.net> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
* | USB OHCI support for at91sam9g45 SoCSergey Matyukevich2010-06-30-2/+39
|/ | | | | | | | | | Add USB OHCI support for at91sam9g45ekes/at91sam9m10g45ek boards. Note that according to errata from Atmel, OHCI is not operational on the first revision of at91sam9g45 chip. So this patch enables OHCI support for later revisions. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
* Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/masterWolfgang Denk2010-06-30-10714/+1600
|\
| * Merge branch 'master' into nextWolfgang Denk2010-06-30-21/+201
| |\
| * | powerpc/bootcount: Add bootcount support for MPC512xMichael Weiss2010-06-29-0/+5
| | | | | | | | | | | | | | | | | | | | | This also uses the breadcrumb register as on MPC5200. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de>
| * | Tools: set multiple variable with fw_setenv utilityStefano Babic2010-06-29-52/+288
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a sort of batch mode to fw_setenv, allowing to set multiple variables in one shot, without updating the flash after each set as now. It is added the possibility to pass a config file with a list of pairs <variable, value> to be set, separated by a TAB character. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | avr32: add unaligned.hAndreas Bießmann2010-06-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes following error: zlib.c:31:27: error: asm/unaligned.h: No such file or directory Suggested-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
| * | avr32: fix linking of atstk100x and favr32 boardsAndreas Bießmann2010-06-29-2/+2
| | | | | | | | | | | | | | | | | | | | | When building some avr32 boards out of tree (e.g. O=..) the linker script could not be found. This patch references the linker script in source tree. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
| * | avr32: disable branch foldingAndreas Bießmann2010-06-29-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | Due to a hardware bug mentioned in latest AP7000 datasheet errata (revision M from 09.09) branch folding is unreliable. This patch disables CPUCR.FE bitfield as stated in datasheet. Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
| * | Fix #if chain and added AVR32 case in cmd_bdinfo.cReinhard Meyer2010-06-29-9/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AVR32 case was missing in cmd_bdinfo, resulting in compiler warning (bd->bi_baudrate declared unsigned int at AVR32, but printf used %d) At the same time slightly reordered #if #elif #endif to make ARM one of the cases and not an extra case surrounding all others Signed-off-by: Reinhard Meyer <info@emk-elektronik.de> Tested-by: Andreas Bießmann <biessmann@corscience.de>
| * | Fix (null) problem for AVR32 boardsReinhard Meyer (-VC)2010-06-29-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the U-Boot address ranges for AVR32 boards are printed like this: "U-Boot code: (null) -> 0001183c data: 000188e8 -> 0004e9b0" This patch fixes this to print: "U-Boot code: 00000000 -> 0001183c data: 000188f8 -> 0004e9c0" Signed-off-by: Reinhard Meyer <info@emk-elektronik.de>
| * | examples/standalone: Remove relocation compile flags for PowerPCPeter Tyser2010-06-29-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, standalone applications were compiled with gcc flags that produced relocatable executables on the PowerPC architecture (eg with the -mrelocatable and -fPIC flags). There's no reason for these applications to be fully relocatable at this time since no relocation fixups are performed on standalone applications. Additionally, removing the gcc relocation flags results in the entry point of applications residing at the base of the image. When a standalone application was relocatable, the entry point was generally located at an offset into the image which was confusing and prone to errors. This change moves the entry point of PowerPC standalone applications from 0x40004 (usually) to 0x40000. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | hwconfig: Add some unit testsAnton Vorontsov2010-06-29-0/+55
| | | | | | | | | | | | | | | | | | | | | I use this for testing, and I think this might be useful in the future. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
| * | hwconfig: Fix stop characters parsing for subkeysAnton Vorontsov2010-06-29-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the following hwconfig string: key1:subkey1=value1,subkey2=value2;key2:value3 The subkey2 cannot be extracted correctly. The parsing code looks for comma as a stopch, but there may be two kind of stop characters: a comma and a semicolon. Currently the code would return "value2;key2:value3", while just "value2" is the correct answer. This patch fixes the issue by making the code aware of multiple stop characters. For old U-Boots, the issue can be workarounded by placing a comma before a semicolon, i.e.: hwconfig=key1:subkey1=value1,subkey2=value2,;key2:value3 Reported-by: York Sun <yorksun@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
| * | Merge branch 'next' of git://git.denx.de/u-boot-ti into nextWolfgang Denk2010-06-29-68/+135
| |\ \
| | * | Davinci: SPI performance enhancementsNick Thompson2010-06-22-67/+128
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following restructuring and optimisations increase the SPI read performance from 1.3MiB/s (on da850) to 2.87MiB/s (on da830): Remove continual revaluation of driver state from the core of the copy loop. State can not change during the copy loop, so it is possible to move these evaluations to before the copy loop. Cost is more code space as loop variants are required for each set of possible configurations. The loops are simpler however, so the extra is only 128bytes on da830 with CONFIG_SPI_HALF_DUPLEX defined. Unrolling the first copy loop iteration allows the TX buffer to be pre-loaded reducing SPI clock starvation. Unrolling the last copy loop iteration removes testing for the final loop iteration every time round the loop. Using the RX buffer empty flag as a transfer throttle allows the assumption that it is always safe to write to the TX buffer, so polling of TX buffer full flag can be removed. Signed-off-by: Nick Thompson <nick.thompson@ge.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config filesPrakash PM2010-06-22-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently EMAC_MDIO_PHY_NUM is defined as 1 in emac_defs.h. Because of this, EMAC does not work on EVMs which do not have phy connected at 1. Moving the macro to board config file makes this configurable depending on where the phy is connected on the MDIO bus. This patch fixes the board reset issue observed during network access on DM365EVM. EMAC driver was assuming EMAC_MDIO_PHY_NUM as 1 but it is 0 on DM365EVM. This patch is verified on da830/omap-l137, dm365 and dm644x evms. Signed-off-by: Prakash PM <prakash.pm@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | | image.h: remove bogus ';' after function declarationsWolfgang Denk2010-06-29-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | ISO C does not allow extra ';' outside of a function Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-sh into nextWolfgang Denk2010-06-29-6/+48
| |\ \ \
| | * | | sh: Add trigger_address_error and support cpu resetNobuhiro Iwamatsu2010-06-28-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support cpu reset by trigger_address_error function. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | sh: Fix path of irqflags.hNobuhiro Iwamatsu2010-06-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This changes path of irqflags.h from linux/ to asm/. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | sh: Fix overflow problem in get_ticksNobuhiro Iwamatsu2010-06-28-2/+18
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | * | | sh: Fix build on the targetNobuhiro Iwamatsu2010-06-28-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SH fails building on the target. This supports this. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | Remove AmigaOneG3SE boardWolfgang Denk2010-06-23-8868/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AmigaOneG3SE board has been orphaned or a very long time, and broken for more than 12 releases resp. more than 3 years. As nobody seems to be interested any more in this stuff we may as well ged rid of it, especially as it clutters many areas of the code so it is a continuous pain for all kinds of ongoing work. Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitionsWolfgang Denk2010-06-23-52/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_BUS_HZ has not really been used anywhere except to be redined as CONFIG_SYS_BUS_CLK; in addition, the mpc7448hpc2 had the bogus CONFIG_SYS_CONFIG_BUS_CLK setting which duplicated the funtionality. Change all this to use CONFIG_SYS_BUS_CLK consistently. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Frank Gottschling <fgottschling@eltec.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Cc: Eran Man <eran@nbase.co.il> Cc: Stefan Roese <sr@denx.de> Cc: Nye Liu <nyet@zumanetworks.com> Cc: Roy Zang <tie-fei.zang@freescale.com>
generated by cgit v1.1 at 2024-11-05 09:02:22 +0000