summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* board/T1040qds: Fix lane-to-slot mapping for SerDes protocol 0x89Codrin Ciubotariu2015-01-21-0/+1
| | | | | Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arch/powerpc: Initialize VSC9953 L2 SwitchCodrin Ciubotariu2015-01-21-0/+5
| | | | | | | This patch initializes VSC9953 L2 Switch for boards that have CONFIG_VSC9953 defined in their config file. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
* net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IPCodrin Ciubotariu2015-01-16-0/+948
| | | | | | | | | | | | | | | | | | | | | | This patch adds a driver for VSC9953 L2 Switch. This Vitesse IP is integrated in Freescale T1040 and T1020 SoCs. The L2 switch has 10 Ethernet ports: 2 internal fixed-links (ports 8 and 9) at 2.5 Gbps and and 8 external ports at 1 Gbps. The external ports may be connected to PHYs over QSGMII and SGMII. Commands have also been added to enable/disable a port and to check a port's link speed, duplexity and status. The commands are: ethsw port <port_nr> enable|disable - enable/disable an l2 switch port ethsw port <port_nr> show - show an l2 switch port's configuration port_nr=0..9; use "all" for all ports For more detailse please see doc/README.t1040-l2switch Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/fm: Enable FMAN ports if l2switch ports are connected over SGMIICodrin Ciubotariu2015-01-16-1/+2
| | | | | | | | | | If SerDes is configured to connect L2 Switch ports from T1040 over SGMII or QSGMII, the two FMAN fixed ports (FM1@DTSEC1 and FM2@DTSEC2) that are connected to two L2 swtch ports must be enabled. These ports don't have PHYs and must be treated accordingly. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arch/powerpc: Add SGMII support for the L2 Switch portsCodrin Ciubotariu2015-01-16-4/+16
| | | | | | | | | Some Freescale SoCs like T1020 and T1040 have an integrated L2 Switch. The L2 Switch ports may be connected to Ethernet PHYs over SGMII and QSGMII. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* arch/powerpc: Fix mapping of Freescale SerDes protocolsCodrin Ciubotariu2015-01-16-30/+38
| | | | | | | | | | | | | | | | The number of supported serdes protocols on Freescale SoCs has increased over time. Until now, an u64 variable have been initialized on boot with the configured protocols. However, since this number has increased (enum srds_prtcl has more than 64 values), 64 bits are no longer sufficient to hold track of all the configured protocols. This patch replaces the u64 map values with static arrays. To keep track of the number of serdes protocols, the SERDES_PRCTL_COUNT vale has been added at the end of enum srds_prtcl. This value must always be the last one. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/fm: Fix error when FMAN MAC has no PHYCodrin Ciubotariu2015-01-16-12/+18
| | | | | | | | | | U-boot assumes that all FMAN ports have a PHY. Some SoCs (like T1040) have fixed links. This means that the ports are connected MAC to MAc and there is no Ethernet PHY attatched. This patch initializes a FMAN MAC even if it doesn't have a PHY attached. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* phylib: add support for aquantia PHYsShaohui Xie2015-01-16-0/+161
| | | | | | | | This patch supports AQ1202, AQ2104, AQR105 PHY. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx: clean up the old deep sleep frameworktang yuantian2015-01-16-30/+1
| | | | | | | | | All the boards that support deep sleep feature are converted to deep sleep generic board interface. The old interface which support non-generic board is not used anymore. So clean it up. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t1040qds: convert deep sleep to generic board interfacetang yuantian2015-01-16-12/+33
| | | | | | | | A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t102xqds: convert deep sleep to generic board interfacetang yuantian2015-01-16-12/+33
| | | | | | | | A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1024rdb: Add support for T1024RDB-PBShengzhou Liu2015-01-16-4/+63
| | | | | | | | | T1024RDB-PB board adds 2.5G SGMII support with AQR105 PHY. rcw_0x095 is used for 10G XFI + 3x PCIex1 rcw_0x135 is used for 2.5G SGMII + 2x PCIex1 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* mpc85xx/t102xrdb: convert deep sleep to generic board interfacetang yuantian2015-01-16-21/+49
| | | | | | | | | | A new deep sleep interface is introduced to support generic board structure. Converts it to use new interface. Besides, added SPI/SD/NAND boot deep sleep support. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* t1024qds: add missing T1024QDS_defconfigShengzhou Liu2015-01-16-0/+4
| | | | | | | Add missing T1024QDS_defconfig for NOR boot on T1024QDS. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t1024: add serdes protocol 0x40 and 0x5fShengzhou Liu2015-01-16-0/+2
| | | | | | | Add serdes protocol 0x40 and 0x5f. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: SECURE BOOT- Add secure boot target for T1042RDBgaurav rana2015-01-16-0/+5
| | | | | | | Secure boot target is added for T1042RDB platform. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/913x: Add config flag for bootdelayharninder rai2015-01-16-0/+2
| | | | | | | | | CONFIG_BOOTDELAY is missing from board header file. Add this macro to enable counting down of auto boot. Signed-off-by: Harninder Rai <harninder.rai@freescale.com> [York Sun: Add commit message] Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Define PBI Flash Base for C29XPCIE Secure BootAneesh Bansal2015-01-16-0/+2
| | | | | | | CONFIG_SYS_PBI_FLASH_BASE is defined for Secure Boot on C29X Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* b4860: Correct LIODN assignment for PCIeTudor Laurentiu2015-01-16-1/+1
| | | | | | | | | | | For B4 the LIODN register for PCIe is in PCIe address space and not in GUTs Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4240rdb: Add alternate SerDes 2 protocol to align with RCWChunhe Lan2015-01-16-3/+3
| | | | | | | | | SerDes 2 protocol 56 is not valid any longer due to the new RCW; protocol 55 is used instead, so add SerDes 2 protocol 55 to align with RCW. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc: mpc85xx: Add dummy gpio.h to enable CONFIG_OF_CONTROLRuchika Gupta2015-01-16-0/+15
| | | | | | | | | | | | | | | | | | | | If CONFIG_OF_CONTROL is enabled, lib/fdtdec.c is compiled. It includes <asm/gpio.h> and then <asm/gpio.h> includes <asm/arch/gpio.h>. As a result, all the SoCs that enable CONFIG_OF_CONTROL must have <asm/arch/gpio.h>. The right fix would be to split the lib/fdtdec.c to remove dependency on GPIO. This commit adds a dummy <asm/arch/gpio.h> to support OF_CONTROL for mpc85xx platform. A file mpc85xx_gpio.h exists in arch/powerpc/include/asm. The defintions in that file conflict with the ones in asm-generic/gpio.h. Hence a dummy header file has been added. This will be removed after FDT-GPIO stuff is fixed correctly. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: SECURE BOOT- Add secure boot target for P5040DSgaurav rana2015-01-16-0/+5
| | | | | | | Secure boot target is added for P5040DS platform. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/c29xpcie: Add secure boot supportPo Liu2015-01-16-0/+12
| | | | | | | | Add NOR and SPI flash secure boot target for C29XPCIE board. Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Mingkai.Hu <Mingkai.Hu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2015-01-16-399/+579
|\
| * omap5: Add netargs and netboot optionCooper Jr., Franklin2015-01-13-1/+14
| | | | | | | | | | | | | | | | * Add netargs and netboot option. * This enables tftp and nfs booting * This puts omap5 devices inline with other devices such as am335x and am437x Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
| * arm: omap3: devkit8000: inherit from ti_omap3_common.hAnthoine Bourgeois2015-01-13-42/+16
| | | | | | | | Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
| * arm: omap3: devkit8000: inherit from ti_armv7_common.hAnthoine Bourgeois2015-01-13-98/+36
| |
| * pcm051: Add boot script support to pcm051matwey.kornilov@gmail.com2015-01-13-11/+18
| | | | | | | | | | | | This patch adds boot script support to pcm051 Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
| * board: ti: am43xx: add support for AM43xx Industrial Development KitFelipe Balbi2015-01-13-19/+118
| | | | | | | | | | | | | | | | | | | | | | | | AM43xx Industrial Development Kit is a new board based on AM437x line of SoCs. Targetted at Industrial Automation applications, it comes with EtherCAT, motor control and other goodies. Thanks to James Doublesin for all the help. Cc: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * pmic: add tps62362 simple wrapper codeFelipe Balbi2015-01-13-0/+77
| | | | | | | | | | | | | | | | This regulator is used with AM437x IDK to feed VDD_MPU, without means to scale VDD_MPU we can't support higher frequencies. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * board: ti: am43xx: take care of all OPPsFelipe Balbi2015-01-13-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure that all OPPs are checked on scale_vcores(). While at that also fix 600MHz VDD_MPU voltage according to AM437x Data Manual available at [1]. Table 5-3 on that document, lists all valid voltages per frequency. [1] http://www.ti.com/lit/ds/symlink/am4379.pdf Signed-off-by: Felipe Balbi <balbi@ti.com>
| * power: tps65218: define all valid VDD_MPU voltagesFelipe Balbi2015-01-13-0/+3
| | | | | | | | | | | | | | | | DCDC1 is used as VDD_MPU in all known boards, let's define all other valid voltages for that rail so it can be used by our boards. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * board: ti: am43xx: replace if else if else with a switchFelipe Balbi2015-01-13-3/+6
| | | | | | | | | | | | | | | | A switch statement fits better in this case, specially considering we have a few extra frequencies to use. Signed-off-by: Felipe Balbi <balbi@ti.com>
| * arm: am437x: Correct PLL frequency for 25MHzJames Doublesin2015-01-13-1/+1
| | | | | | | | | | | | | | | | The frequencies for 25MHz in dpll_per were out of spec for 25MHz, correct. Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * arm: am437x: Enable hardware leveling for EMIFJames Doublesin2015-01-13-207/+138
| | | | | | | | | | | | | | | | | | | | | | | | Switch to using hardware leveling for certain parameters on the EMIF rather than using precalculated values. Doing this also means we have a common place now between am437x and am335x for setting emif_sdram_ref_ctrl with a value for the correct delay length. Tested-by: Felipe Balbi <balbi@ti.com> Tested-by: Tom Rini <trini@ti.com> Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * arm: am437x: PLL values for all input frequenciesJames Doublesin2015-01-13-26/+33
| | | | | | | | | | | | | | | | | | | | Need to provide PLL values for all possible input frequencies (19.2, 24, 25, 26MHz). Values provide are also optimized for jitter (needed especially for PER PLL and DDR PLL). Signed-off-by: James Doublesin <doublesin@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
| * mtd: OMAP: Enable GPMC prefetch modeDaniel Mack2015-01-13-3/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable GPMC's prefetch feature for NAND access. This speeds up NAND read access a lot by pre-fetching contents in the background and reading them through the FIFO address. The current implementation has two limitations: a) it only works in 8-bit mode b) it only supports read access Both is easily fixable by someone who has hardware to implement it. Note that U-Boot code uses non word-aligned buffers to read data into, and request read lengths that are not multiples of 4, so both partial buffers (head and tail) have to be addressed. Tested on AM335x hardware. Tested-by: Guido Martínez <guido@vanguardiasur.com.ar> Reviewed-by: Guido Martínez <guido@vanguardiasur.com.ar> Signed-off-by: Daniel Mack <zonque@gmail.com> [trini: Make apply again, use 'cs' fix pointed out by Guido] Signed-off-by: Tom Rini <trini@ti.com>
* | powerpc: 74xx_7xx: remove 74xx_7xx cpu supportMasahiro Yamada2015-01-16-18881/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | All the 74xx_7xx boards are still non-generic boards: P3G4, ZUMA, ppmc7xx, ELPPC, mpc7448hpc2 Acked-by: Marek Vasut <marex@denx.de> Acked-by: Stefan Roese <sr@denx.de> Acked-by: York Sun <yorksun@freescale.com> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Nye Liu <nyet@zumanetworks.com> Cc: Roy Zang <tie-fei.zang@freescale.com>
* | mpc8xx: remove unused linker scriptMasahiro Yamada2015-01-16-82/+0
| | | | | | | | | | | | | | | | | | | | Now TQM8xx is the only remaining board family of mpc8xx. It uses its own linker script, board/tqc/tqm8xx/u-boot.lds. arch/powerpc/cpu/mpc8xx/u-boot.lds is not used by any boards. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
* | ppc4xx: remove dead codeMasahiro Yamada2015-01-16-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | Since commit 843125daebd7 (ppc4xx: remove HH405 board), CONFIG_HH405 is not defined. Since commit d52633047913 (ppc4xx: remove PMC405), CONFIG_PMC405 is not defined. Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
* | Merge branch 'buildman' of git://git.denx.de/u-boot-x86Tom Rini2015-01-15-78/+606
|\ \
| * | buildman: Add an option to write the full build outputSimon Glass2015-01-14-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | Normally buildman runs with 'make -s' meaning that only errors and warnings appear in the log file. Add a -V option to run make in verbose mode, and with V=1, causing a full build log to be created. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Add the option to download toolchains from kernel.orgSimon Glass2015-01-14-13/+303
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The site at https://www.kernel.org/pub/tools/crosstool/ is a convenient repository of toolchains which can be used for U-Boot. Add a feature to download and install a toolchain for a selected architecture automatically. It isn't clear how long this site will stay in the current place and format, but we should be able to rely on bug reports if it changes. Suggested-by: Marek Vašut <marex@denx.de> Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Allow architecture to alias to multiple toolchainsSimon Glass2015-01-14-5/+23
| | | | | | | | | | | | | | | | | | | | | Some archs have need than one alias, so support a list of alises in the ..buildman file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Don't use the local settings when running testsSimon Glass2015-01-14-1/+14
| | | | | | | | | | | | | | | | | | | | | We should create a test setting file when running testes, not use whatever happens to be on the local machine. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Don't complain about missing sections in ~/.buildmanSimon Glass2015-01-14-1/+0
| | | | | | | | | | | | | | | | | | Silently ignore this since it is valid to have missing sections. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | buildman: Add documentation about the .buildman fileSimon Glass2015-01-14-20/+53
| | | | | | | | | | | | | | | | | | | | | This file is only partially documented. Add some more details. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
| * | buildman: Add a note about Python pre-requisitesSimon Glass2015-01-14-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | Since we need a few modules which might not be available in a bare-bones distribution, add a note about that to the README. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Wolfgang Denk <wd@denx.de>
| * | buildman: Add an option to use the full tool chain pathSimon Glass2015-01-14-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases there may be multiple toolchains with the same name in the path. Provide an option to use the full path in the CROSS_COMPILE environment variable. Note: Wolfgang mentioned that this is dangerous since in some cases there may be other tools on the path that are needed. So this is set up as an option, not the default. I will need test confirmation (i.e. that this commit fixes a real problem) before merging it. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Steve Rae <srae@broadcom.com>
| * | buildman: Put the toolchain path first instead of last in PATHSimon Glass2015-01-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If: 1. Toolchains A and B have the same filename 2. Toolchain A is in the PATH 3. Toolchain B is given in ~/.buildman and buildman uses it to build then buildman will add toolchain B to the end of its path but will not necessarily use it since U-Boot will find toolchain A first in the PATH. Try to fix this by putting the toolchain first in the path instead of last. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-07 09:51:30 +0000