summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ARM: rmobile: Add support salvator-x boardNobuhiro Iwamatsu2016-08-17-0/+329
| | | | | | | | Salvator-x is an entry level development board based on R-Car H3 SoC (R8A7795). This commit supports SCIF only. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Add support R8A7795Nobuhiro Iwamatsu2016-08-17-0/+5877
| | | | | | | | | Renesas R8A7795 is CPU with Cortex-a57. This supports the basic register definition and GPIO and framework of PFC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Add support R-Car Generation 3Nobuhiro Iwamatsu2016-08-17-1/+198
| | | | | | | This adds supporting R-Car Generation 3 (Gen3) as Renesas ARM64 SoC. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Move rcar-gen2-common to rcar-commonNobuhiro Iwamatsu2016-08-17-7/+7
| | | | | | | To common use of rcar-gen2-common directory in the R-Car SoCs, and change from rcar-gen2-common to rcar-common. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Create R-Car 32bit (Gen1 and Gen2) for KconfigNobuhiro Iwamatsu2016-08-17-82/+96
| | | | | | This creates Kconfig of R-Car 32bit for Kconfig of R-Car 64bit (Gen3). Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* serial: sh: Add support R8A7795Hiroyuki Yokoyama2016-08-17-1/+2
| | | | | | | This can be used in the same way as other R-CAR serial setting. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* MAINTAINERS: Add maintainer entry of RMOBILENobuhiro Iwamatsu2016-08-17-0/+6
| | | | | | Add MAINTAINERS entry. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: Rmobile: Rename CONFIG_RMOBILE to CONFIG_ARCH_RMOBILENobuhiro Iwamatsu2016-08-17-67/+69
| | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Move SoC headers to mach-rmobile/include/machNobuhiro Iwamatsu2016-08-17-0/+0
| | | | | | Move form arch/arm/include/asm/arch-rmobile/ to arch/arm/mach-rmobile/include/mach/. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* ARM: rmobile: Move SoC sources to mach-rmobileNobuhiro Iwamatsu2016-08-17-2/+3
| | | | | | Move from arch/arm/cpu/armv7/rmobile/ to arch/arm/mach-rmobile/. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* SPL: tiny-printf: avoid any BSS usageAndre Przywara2016-07-08-3/+8
| | | | | | | | | | As printf calls may be executed quite early, we should avoid using any BSS stored variables, since some boards put BSS in DRAM, which may not have been initialised yet. Explicitly mark those "static global" variables as belonging to the .data section, to keep tiny-printf clear of any BSS usage. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* test/py: fix CONFIG_ testsStephen Warren2016-07-08-5/+5
| | | | | | | | | | | Some CONFIG_ variables were recently renamed, but test/py wasn't updated to match. This causes some tests to be skipped. Fix test/py so the tests are run. Fixes: 11636258981a ("Rename reset to sysreset") Fixes: f1f9d4fac527 ("hush: complete renaming CONFIG_SYS_HUSH_PARSER to CONFIG_HUSH_PARSER") Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
* mmc: msm_sdhci: Set mmc->dev pointer in msm_sdc_probe()Mateusz Kulikowski2016-07-08-1/+6
| | | | | | | | | | | MMC core expects (now) valid mmc->dev pointer. During conversion in commit cffe5d86 not every driver was updated. This patch fixes crash while accessing MMC on boards using Qualcomm SDHCI controller. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-07-07-28/+21
|\
| * powerpc: mpc85xx: kmp204x: Fix compiling error for usb errataYork Sun2016-07-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Commit 9262367 moves USB errata workaround into a C file. This causes compiling error for kmcoge4 and kmlion1. To enable the errata workaround, define CONFIG_USB_EHCI_FSL in common header. Signed-off-by: York Sun <york.sun@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Ed Swarthout <Ed.Swarthout@nxp.com> Cc: Sriram Dash <sriram.dash@nxp.com> Fixes: 92623672f9d3 ("fsl: usb: make errata function common for PPC and ARM")
| * powerpc: mpc85xx: Do not build errata command in SPLMarek Vasut2016-07-05-0/+2
| | | | | | | | | | | | | | | | | | The errata command is useless in SPL, so don't build it. This fixes multiple build failures on PowerPC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: York Sun <york.sun@nxp.com> Fixes: 92623672f9d3 ("fsl: usb: make errata function common for PPC and ARM")
| * usb: dm: Make "usb info" use usb_for_each_root_dev()Hans de Goede2016-07-05-25/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old dm "usb info" implementation has several issues: 1) NULL pointer deref when a bus has no children 2) Not showing usb devices on busses without an emulated root-hub (otg host) 3) Attempting to show devices on inactive busses 4) "usb info" Would cause some hosts to get re-probed something which only "usb reset" should do TL;DR: proper iterating over usb bus root devs is hard, use the helper for it. Reported-by: Bernhard Nortmann <bernhard.nortmann@web.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * usb: dm: Add a usb_for_each_root_dev() helper functionHans de Goede2016-07-05-3/+12
| | | | | | | | | | | | | | | | Iterating over usb-root devs and doing something for all of them is a bit tricky with dm, factor out the proven usb_show_tree() for this into a helper function. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-07-06-452/+2329
|\ \
| * | fdt: Drop some unused compatible stringsSimon Glass2016-07-05-8/+0
| | | | | | | | | | | | | | | | | | We have driver-model drivers for some of these now, so drop them. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Always use write-through cache on LCDSimon Glass2016-07-05-18/+3
| | | | | | | | | | | | | | | | | | | | | | | | This seems to give the best performance, so let's use it always. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | video: tegra: Move to using simple-panel and pwm-backlightSimon Glass2016-07-05-335/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have standard drivers for panels and backlights which can do most of the work for us. Move the tegra20 LCD driver over to use those instead of custom code. This patch includes device tree changes for the nvidia boards. I have only been able to test seaboard. If this patch is applied, these boards will also need to be synced with the kernel, and updated to use display-timings: - colibri - medcom-wide - paz00 - tec Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: dts: Sync tegra20 device tree files with LinuxSimon Glass2016-07-05-73/+2154
| | | | | | | | | | | | | | | | | | | | | | | | Sync everything except the display panel, which will come in a future patch. One USB port is left disabled since we don't want to support it in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | errno: Allow errno_str() to be used without CONFIG_ERRNO_STRSimon Glass2016-07-05-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pmic framework uses errno_str() and this requires board that use it to enable CONFIG_ERRNO_STR to avoid a build error. Update the header to provide a NULL error message when CONFIG_ERRNO_STR is not defined, and fix the build error. This will show as "(null)" when U-Boot prints it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | errno: Add copyright header and header guardSimon Glass2016-07-05-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bring in a copyright for this file from cmd/pmic.c since this file was submitted by the same author at around the same time. Also fix the missing header guard. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | pci: tegra: actually program REFCLK_CFG* on recent SoCsStephen Warren2016-07-05-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On recent SoCs, tegra_pcie_phy_enable() isn't called; but instead tegra_pcie_enable_controller() calls tegra_xusb_phy_enable(). However, part of tegra_pcie_phy_enable() needs to happen in all cases. Move that code to tegra_pcie_port_enable() instead. For reference, NVIDIA's downstream Linux kernel performs this operation in tegra_pcie_enable_rp_features(), which is called immediately after tegra_pcie_port_enable(). Since that function doesn't exist in the U-Boot driver, we'll just add it to the tail of tegra_pcie_port_enable() instead. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | pci: tegra: correctly program PADS_REFCLK registersStephen Warren2016-07-05-13/+9
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value that should be programmed into the PADS_REFCLK register varies per SoC. Fix the Tegra PCIe driver to program the correct values. Future SoCs will require different values in cfg0/1, so the two values are stored separately in the per-SoC data structures. For reference, the values are all documented in NV bug 1771116 comment 20. The Tegra210 value doesn't match the current TRM, but I've filed a bug to get the TRM fixed. Earlier TRMs don't document the value this register should contain, but the ASIC team has validated all these values, except for the Tegra20 value which is simply left unchanged in this patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-07-06-11/+51
|\ \
| * | net: rtl8169: Fix return value for rtl_send_commonOleksandr Tymoshenko2016-07-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Return value of rtl_send_common propogates unmodified all the way up to eth_send and further to API consumer if CONFIG_API is enabled. Previously rtl_send_common returned number of bytes sent on success which was erroneouly detected as error condition by API consumers that checked for operation success by comparing return value with 0. Switch rtl_send_common to use common convention: return 0 on success and negative value for failure. Cc: Stephen Warren <swarren@nvidia.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: Fix incorrect RPC packets on 64-bit systemsRalf Hubert2016-07-06-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes incorrect RPC packet layout caused by 'long' type size difference on 64 and 32-bit architectures. Signed-off-by: Ralf Hubert <r.hubert@technisat.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | driver: net: phylib: add support for aquantia AQR106/107 PHYMingkai Hu2016-07-06-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for aquantia AQR106/107 PHY. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: designware: Make driver independent from DM_GPIO againAlexey Brodkin2016-07-06-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 90b7fc924adf "net: designware: support phy reset device-tree bindings" made DW GMAC driver dependent on DM_GPIO by unconditional usage of purely DM_GPIO stuff like: * dm_gpio_XXX() * gpio_request_by_name() But since that driver as of today might be easily used without DM_GPIO (that's the case for Synopsys AXS10x boards) we're shielding all DM_GPIO things by ifdefs. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Beniamino Galvani <b.galvani@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | common: Always include errno.h in common.hJoe Hershberger2016-07-06-0/+1
| |/ | | | | | | | | | | | | | | We want people using errnos for errors instead of -1, so make it easy by always including the definition of all the errnos. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | rockchip: video: Lower hpd wait timeSjoerd Simons2016-07-05-1/+1
|/ | | | | | | | | | | | | Waiting 30 seconds for the hpd to go high seems a bit much, especially on headless boots. Lowering the timeout to 300ms. Sending as RFC because frankly i don't know what a sensible timeout is here, but 30 seconds is clearly not it :) Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org> Dropped RFC tag: Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-arcTom Rini2016-07-04-2/+4
|\
| * arc: make global_data.h usable in assembly filesAlexey Brodkin2016-07-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently on attempt to use global_data.h in an assembly file following will happen: -------------------->8----------------- ./arch/arc/include/asm/global_data.h: Assembler messages: ./arch/arc/include/asm/global_data.h:11: Error: bad instruction 'struct arch_global_data{' ./arch/arc/include/asm/global_data.h:12: Error: junk at end of line, first unrecognized character is `}' scripts/Makefile.build:316: recipe for target 'arch/arc/lib/start.o' failed -------------------->8----------------- In this change we disable struct arch_global_data in ASM which fixes the issue above. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * arc: Use "-mcpu=archs" instead of deprecated "-marchs" for ARC HSAlexey Brodkin2016-07-04-2/+2
| | | | | | | | | | | | | | | | | | Newer ARC toolchains don't support "-marchs" option any longer. Instead "-mcpu=archs" should be used. What's also important older toiolchains that support ARC HS cores will also happily accept "-mcpu=archs" so that's a very safe move. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2016-07-02-2/+396
|\ \
| * | sunxi: Add defconfig and DTS file for Allwinner R16 EVB (Parrot)Quentin Schulz2016-07-02-1/+393
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Parrot Board is an evaluation board with an Allwinner R16 (assumed to be close to an Allwinner A33), 4GB of eMMC, 512MB of RAM, USB host and OTG, a WiFi/Bluetooth combo chip, a micro SD Card reader, 2 controllable buttons, an LVDS port with separated backlight and capacitive touch panel ports, an audio/microphone jack, a camera CSI port, 2 sets of 22 GPIOs and an accelerometer. The DTS file is identical to the one submitted to the upstream kernel. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Add missing boot_media fields in the SPL headerOlliver Schinagl2016-07-02-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b19236fd1 ("sunxi: Increase SPL header size to 64 bytes to avoid code corruption") Added defines for MMC0 and SPI as boot identification. After verifying on an OLinuXino Lime2 with NAND and eMMC, the expected values have been confirmed and added to spl.h Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: spl: Fix DRAM info printingHans de Goede2016-07-02-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | The switch to simple_printf was causing the SPL dram info to show as: DRAM: u MiB This fixes this by switching from %lu to %d for printing the DRAM size. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-07-01-4/+9
|\ \
| * | ehci: mx7: fix otg id detectionPeng Fan2016-06-25-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USBNC_PHYCFG2_ACAENB bit should be cleared to enable the OTG ID detection, not set it. When the bit is set, the ACA Resistance Detection is enabled, which disables the OTG ID detection, because the internal pull up is off. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | ehci: mx7: fix usbnc_regsPeng Fan2016-06-25-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | There is a 4 bytes hole between phy_cfg2 and phy_status, fix the usbnc_regs structure to include the hole. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | usb: fsl: Fix NULL terminating issue for usb controller name stringRajesh Bhagat2016-06-25-1/+2
| | | | | | | | | | | | | | | | | | | | | Fixes NULL terminating issue for usb controller name string by using sizeof operator. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-07-01-1/+1
|\ \ \ | |_|/ |/| |
| * | arm: socfpga: Fix "improve raw MMC SPL boot"Marek Vasut2016-06-23-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | This fixes commit d31e9c575f24f4b7f5f382ccae70d7a86bbc379d , which broke booting from SD card on all SoCFPGA boards. The patch assumes the bootloader partition to be partition 3, at the end of the SD card, which doesn't make any sense. U-Boot assumes the bootloader partition is partition 1 or that the bootloader image is at offset +1 MiB from the start of SD card. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sylvain Lesne <lesne@alse-fr.com>
* | Prepare v2016.07-rc3Tom Rini2016-07-01-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-07-01-454/+714
|\ \
| * | ARM: uniphier: add external IRQ setup codeMasahiro Yamada2016-07-02-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | I will carry this work-around until it is cared in the kernel. This looks up the AIDET node and sets up a register to handle active low interrupt signals. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.1 at 2024-11-04 17:50:48 +0000