summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* net: rtl8169: Properly align buffersThierry Reding2014-12-18-29/+34
| | | | | | | | | | | | | | | | RX and TX descriptor rings should be aligned to 256 byte boundaries. Use the DEFINE_ALIGN_BUFFER() macro to define the buffers so that they don't have to be manually aligned later on. Also make sure that the buffers do align to cache-line boundaries in case the cache-line is higher than the 256 byte alignment requirements of the NIC. Also add a warning if the cache-line size is larger than the descriptor size, because the driver may discard changes to descriptors made by the hardware when requeuing RX buffers. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* net: rtl8169: Honor CONFIG_SYS_RX_ETH_BUFFERThierry Reding2014-12-18-1/+5
| | | | | | | | | | According to the top-level README file, this configuration setting can be used to override the number of receive buffers that an ethernet NIC uses. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Enable non-cached memoryThierry Reding2014-12-18-1/+3
| | | | | | | | | | | | | Some boards, most notably those with a PCIe ethernet NIC, require this to avoid cache coherency problems. Since the option adds very little code and overhead enable it across all Tegra generations. Other drivers may also start supporting this functionality at some point, so enabling it now will automatically reap the benefits later on. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: Implement non-cached memory supportThierry Reding2014-12-18-0/+79
| | | | | | | | | | | | | | | | | | | | | | Implement an API that can be used by drivers to allocate memory from a pool that is mapped uncached. This is useful if drivers would otherwise need to do extensive cache maintenance (or explicitly maintaining the cache isn't safe). The API is protected using the new CONFIG_SYS_NONCACHED_MEMORY setting. Boards can set this to the size to be used for the non-cached area. The area will typically be right below the malloc() area, but architectures should take care of aligning the beginning and end of the area to honor any mapping restrictions. Architectures must also ensure that mappings established for this area do not overlap with the malloc() area (which should remain cached for improved performance). While the API is currently only implemented for ARM v7, it should be generic enough to allow other architectures to implement it as well. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Enable PCIe on Jetson TK1Thierry Reding2014-12-18-0/+412
| | | | | | | | | | The Jetson TK1 has an ethernet NIC connected to the PCIe bus and routes the second root port to a miniPCIe slot. Enable the PCIe controller and the network driver to allow the device to boot over the network. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add Tegra124 PCIe device tree nodeThierry Reding2014-12-18-0/+66
| | | | | | | | | Add the device tree node for the PCIe controller found on Tegra124 SoCs. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add GIC for Tegra124Thierry Reding2014-12-18-0/+13
| | | | | | | | | | | Add a device tree node for the GIC v2 found on the Cortex-A15 CPU complex of Tegra124. U-Boot doesn't use this but subsequent patches will add device tree nodes that reference it by phandle. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Enable PCIe on BeaverThierry Reding2014-12-18-0/+255
| | | | | | | | | | | | The Beaver has an ethernet NIC connected to the PCIe bus. Enable the PCIe controller and the network device driver so that the device can boot over the network. In addition the board has a mini-PCIe expansion slot. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Enable PCIe on CardhuThierry Reding2014-12-18-0/+424
| | | | | | | | | | | The PCIe bus on Cardhu is routed to the dock connector. An ethernet NIC is available on the dock over the PCIe bus. Enable the PCIe controller and the network device driver so that the device can boot over the network. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add Tegra30 PCIe device tree nodeThierry Reding2014-12-18-1/+75
| | | | | | | | Add the device tree node for the PCIe controller found on Tegra30 SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add GIC for Tegra30Thierry Reding2014-12-18-0/+9
| | | | | | | | | | Add a device tree node for the GIC found on Tegra30. U-Boot doesn't use it directly but subsequent patches will add device tree nodes that reference it by phandle. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Enable PCIe on TrimSliceThierry Reding2014-12-18-0/+87
| | | | | | | | | | The TrimSlice has an ethernet NIC connected to the PCIe bus. Enable the PCIe controller and the network driver so that the device can boot over the network. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add Tegra20 PCIe device tree nodeThierry Reding2014-12-18-1/+60
| | | | | | | | | Add the device tree node for the PCIe controller found on Tegra20 SoCs. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* pci: tegra: Add Tegra PCIe driverThierry Reding2014-12-18-0/+1150
| | | | | | | | | | | | | | | Add support for the PCIe controller found on some generations of Tegra. Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has 3 root ports with a total of 6 lanes and Tegra124 has 2 root ports with a total of 5 lanes. This is based on the Linux kernel driver, originally submitted upstream by Mike Rapoport. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Enable XUSB pad controller on Jetson TK1Thierry Reding2014-12-18-0/+26
| | | | | | | | | | Add the PCIe and SATA lane configuration to the Jetson TK1 device tree, so that the XUSB pad controller can be appropriately configured. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Add XUSB pad controller on Tegra124Thierry Reding2014-12-18-0/+10
| | | | | | | | | | The XUSB pad controller is used for pinmuxing of the XUSB, PCIe and SATA lanes. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Implement XUSB pad controllerThierry Reding2014-12-18-0/+794
| | | | | | | | | | | | | | | This controller was introduced on Tegra114 to handle XUSB pads. On Tegra124 it is also used for PCIe and SATA pin muxing and PHY control. Only the Tegra124 PCIe and SATA functionality is currently implemented, with weak symbols on Tegra114. Tegra20 and Tegra30 also provide weak symbols for these functions so that drivers can use the same API irrespective of which SoC they're being built for. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Implement powergate supportThierry Reding2014-12-18-0/+165
| | | | | | | | | Implement the powergate API that allows various power partitions to be power up and down. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Provide PCIEXCLK reset IDThierry Reding2014-12-18-3/+4
| | | | | | | | | | | | | This reset is required for PCIe and the corresponding ID therefore needs to be defined. The enumeration value for this was properly defined on some SoCs but not on others. Similarly, some contained it in the mapping of peripheral IDs to clock IDs, other didn't. This patch defines it consistently for all supported SoC generations. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: Implement tegra_plle_enable()Thierry Reding2014-12-18-0/+406
| | | | | | | | | | | This function is required by PCIe and SATA. This patch implements it on Tegra20, Tegra30 and Tegra124. It isn't implemented for Tegra114 because it doesn't support PCIe or SATA. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* power: Add AMS AS3722 PMIC supportThierry Reding2014-12-18-0/+294
| | | | | | | | | The AS3722 provides a number of DC/DC converters and LDOs as well as 8 GPIOs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: colibri_t30: comment style fixMarcel Ziswiler2014-12-18-4/+8
| | | | | Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-12-16-60/+389
|\
| * mpc85xx/t104xrdb: convert deep sleep to generic board interfaceTang Yuantian2014-12-15-29/+36
| | | | | | | | | | | | | | | | A new interface is introduced to support generic board structure. Converts it to use new interface. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * qe/deep-sleep: modify qe deep-sleep for generic boardZhao Qiang2014-12-15-0/+11
| | | | | | | | | | | | | | | | Deep sleep for generic board is supported now, modify qe deep-sleep code to adapt it. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * p5040ds: changed liodn offsetsTudor Laurentiu2014-12-15-12/+12
| | | | | | | | | | | | | | | | | | Offsets were overlaping, causing pamu access violations in hypervised scenarios. Signed-off-by: Cristian Sovaiala <cristian.sovaiala@freescale.com> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * crypto/fsl: Fix RNG instantiation failure.gaurav rana2014-12-15-1/+1
| | | | | | | | | | | | | | | | | | | | Corrected the order of arguments in memset in run_descriptor function. Wrong order of argumnets led to improper initialization of members of struct type result. This resulted in RNG instantiation error. Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/T10xx: Fix number of portalsJeffrey Ladouceur2014-12-15-8/+8
| | | | | | | | | | | | | | | | | | | | | | Following boards has incorrect number of portals defined. powerpc/T102xQDS powerpc/T102xRDB powerpc/T1040QDS powerpc/T104xRDB Signed-off-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * mpc85xx: inhibit qman and bman portals by defaultJeffrey Ladouceur2014-12-15-0/+267
| | | | | | | | | | | | | | | | | | Not all portals might be managed and therefore visible. Set the isdr register so that the corresponding isr register won't be set. This is required when supporting power management. Signed-off-by: Jeffrey Ladouceur <Jeffrey.Ladouceur@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * net/fm: update ft_fixup_port to differentiate dual-role macShengzhou Liu2014-12-15-5/+16
| | | | | | | | | | | | | | | | | | | | we need to differentiate dual-role MACs into two types: MACs with 10GEC enumeration consistent with DTSEC enumeration(defined by CONFIG_FSL_FM_10GEC_REGULAR_NOTATION) and other MACs without CONFIG_FSL_FM_10GEC_REGULAR_NOTATION defined. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/mpc85xx: Fix DDR TLB mapping leftoverYork Sun2014-12-15-4/+8
| | | | | | | | | | | | | | | | | | | | Commit f29f804a93e87c17670607641d120f431a3b0633 generalized the TLB mapping function, but made the DDR mapping leftover size to zero, causing the message not printed. Signed-off-by: York Sun <yorksun@freescale.com> CC: Alexander Graf <agraf@suse.de> CC: Scott Wood <scottwood@freescale.com>
| * driver/ddr/fsl: Fix MRC_CYC calculation for DDR3York Sun2014-12-15-1/+20
| | | | | | | | | | | | | | | | | | | | For DDR controller version 4.7 or newer, MRC_CYC (mode register set cycle time) is max(tMRD, tMOD). tMRD is 4nCK, or 8nCK (RDIMM). tMOD is max(12nCK, 15ns) according to JEDEC spec. DDR4 is not affected by this change. Signed-off-by: York Sun <yorksun@freescale.com>
| * powerpc/p2041rdb: enable generic board configsShaohui Xie2014-12-15-0/+2
| | | | | | | | | | | | | | | | | | Add following configs in header file: CONFIG_SYS_GENERIC_BOARD CONFIG_DISPLAY_BOARDINFO Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/t4240rdb: Convert to use generic board codeChunhe Lan2014-12-15-0/+2
| | | | | | | | | | Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * powerpc/bsc913x: Convert to use generic board codeharninder rai2014-12-15-0/+6
| | | | | | | | | | Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2014-12-16-52/+1901
|\ \
| * | arm: socfpga: board: Repair Micrel PHY tuningPavel Machek2014-12-16-6/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add proper error checking into the PHY tuning patch. Make the PHY tunning only happen in case the KSZ9021 PHY is enabled in config. Call the config callback after the tuning finished. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Tom Rini <trini@ti.com> Cc: Pavel Machek <pavel@denx.de>
| * | socfpga: correctly increment freeze_controller_base addressDinh Nguyen2014-12-06-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correctly increment the base address of the freeze controller. And since SYSMGR_FRZCTRL_VIOCTRL_SHIFT is not needed, remove it from the include file. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| * | socfpga: add missing struct member fifo_triple_byteDinh Nguyen2014-12-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | socfpga_scan_manager structure was missing a data member. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Vince Bridgers <vbridger@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Cc: Wolfgang Denk <wd@denx.de>
| * | arm: socfpga: DW_SPI: Remove clock info from config headerStefan Roese2014-12-06-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the now unnecessary clocking info from the SoCFPGA config header. As this info in now used directly in the SPI driver itself. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | spi: designware_spi: Some fixes / changesStefan Roese2014-12-06-19/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As suggested by Pavel, here some fixes to the designware SPI driver: - Spelling fixes - Comment for timeout added - Removed n_bytes completely (bits_per_word is enough for this) - Unput clock now not defined via macro. The function to get the clock value is now called directly from within the driver Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | arm: socfpga: Add missing DW master SPI clock prototyp to clock_manager.hStefan Roese2014-12-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: Use only one clrbits_le32 call to deassert SPI reset bitsStefan Roese2014-12-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As suggested by Pavel, lets combine the two calls into one. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: dts: altr,rst-mgr.h: Move to SPDX license identifiersStefan Roese2014-12-06-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: Add Designware (DW) SPI support to config headerStefan Roese2014-12-06-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable support for the DW master SPI controller in the config header for the SoCFPGA. This controller can only be enabled, if DT support is enabled. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: dts: socrates: Add spi1/2 aliases needed DM SPI probingStefan Roese2014-12-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this alias, DM based probing does not work. So lets add this alias to get the bus numbering correct for the Designware SPI controllers. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | arm: socfpga: dts: Add spi0/1 dts nodes for the Designware master SPI devicesStefan Roese2014-12-06-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Pavel Machek <pavel@denx.de>
| * | spi: Add designware master SPI DM driver used on SoCFPGAStefan Roese2014-12-06-0/+426
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the driver for the Designware master SPI controller. This IP core is integrated on the Altera SoCFPGA. This implementation is a driver model (DM) implementation. So multiple SPI drivers can be used. Thats necessary, since SoCFPGA also integrates the Cadence QSPI controller used to connect the SPI NOR flashes. Without DM, using multiple SPI drivers is not possible. This driver is very loosely based on the Linux driver. Most of the Linux driver is removed. Only the polling loop for the transfer is really used from this driver, as we don't support interrupts and DMA right now. This is tested on the SoCrates SoCFPGA board using the SPI pins on the P14 header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | arm: socfpga: Add Cadence QSPI support to config headerStefan Roese2014-12-06-1/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this driver enabled for SoCFPGA, access to SPI NOR flash is supported. The configuration (page size, timing info) will be taken from the DT. See socrates as an example. This QSPI supports depends on DT. So QSPI is only enabled if CONFIG_OF_CONTROL is defined (see socfpga_socrates_defconfig). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
| * | arm: socfpga: dts: Add spi0 alias for Cadence QSPI driverStefan Roese2014-12-06-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this alias, DM based probing does not work. So lets add this alias to get the bus numbering correct. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Vince Bridgers <vbridger@altera.com> Cc: Marek Vasut <marex@denx.de> Cc: Pavel Machek <pavel@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>