summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
| * armv8: ls1046ardb: Add LS1046ARDB board supportMingkai Hu2016-09-14-0/+1470
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1046ARDB Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 512 Mbyte NAND flash * Two 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card * On-board 4G eMMC Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: * PCIe1 (SerDes2 Lane0) to miniPCIe slot * PCIe2 (SerDes2 Lane1) to x2 PCIe slot * PCIe3 (SerDes2 Lane2) to x4 PCIe slot SATA: * SerDes2 Lane3 to SATA port USB 3.0: one super speed USB 3.0 type A port one Micro-AB port UART: supports two UARTs up to 115200 bps for console Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: disable SATA ECC in DCSRShaohui Xie2016-09-14-0/+4
| | | | | | | | | | | | | | | | | | This is a workaround to fix SATA CRC error. Once the root cause is found the ECC disabling will be removed. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: Enable DDR erratum for ls1046aShengzhou Liu2016-09-14-0/+6
| | | | | | | | | | | | | | | | | | Enable ERRATUM_A008511, ERRATUM_A009801, ERRATUM_A009803, ERRATUM_A009942, ERRATUM_A010165 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: spl: remove BSS clearing and board_init_rQianyu Gong2016-09-14-5/+0
| | | | | | | | | | | | | | | | | | | | As per the top level U-Boot README "Board Initialisation Flow" section, board_init_f() should return without calling board_init_r() directly. Clearing BSS and calling board_init_r() will be done in crt0_64.S. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: add define CONFIG_STANDALONE_LOAD_ADDR for standalone appShaohui Xie2016-09-14-0/+2
| | | | | | | | | | | | | | | | The CONFIG_STANDALONE_LOAD_ADDR is set to 0x80300000 by default. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: fsl-layerscape: Increase L2 Data RAM latency and L2 Tag RAM latencyMingkai Hu2016-09-14-0/+15
| | | | | | | | | | | | | | | | | | | | | | According to design specification, the L2 cache operates at the same frequency as the A72 CPUs in the cluster with a 3-cycle latency, so increase the L2 Data RAM and Tag RAM latency to 3 cycles, or else, will run into different call trace issues. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * Export memset for standalone AQ FW load appsShaohui Xie2016-09-14-1/+2
| | | | | | | | | | | | | | | | | | | | The 'commit 95279315076c ("board/ls2085rdb: Export functions for standalone AQ FW load apps")' mentioned memset was exported but it was not, this patch exports the memset. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ddr: fsl: fix a compile issueShaohui Xie2016-09-14-1/+6
| | | | | | | | | | | | | | | | | | | | When CONFIG_SYS_FSL_ERRATUM_A009801 is defined but CONFIG_SYS_FSL_ERRATUM_A008511 not defined, there is compile error that temp32 undeclared, this patch fixes it. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * driver/ddr/fsl: Add general MMDC driver and reuse common MMDC driver for ls1012aShengzhou Liu2016-09-14-409/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This general MMDC driver adds basic support for Freescale MMDC (Multi Mode DDR Controller). Currently MMDC is integrated on ARMv8 LS1012A SoC for DDR3L, there will be a update to this driver to support more flexible configuration if new features (DDR4, multiple controllers/chip selections, etc) are implimented in future. Meantime, reuse common MMDC driver for LS1012ARDB/LS1012AQDS/ LS1012AFRDM. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv7:ls1021a: Enable workaround for DDR erratum A-009942Shengzhou Liu2016-09-14-1/+7
| | | | | | | | | | Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add LS1 PSCI system suspendHongbo Zhang2016-09-14-2/+284
| | | | | | | | | | | | | | | | The deep sleep function of LS1 platform, is mapped into PSCI system suspend function, this patch adds implementation of it. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add EPU Finite State MachineHongbo Zhang2016-09-14-0/+165
| | | | | | | | | | | | | | | | The EPU Finite State Machie (FSM) is used in both the last stage of system suspend and the earliest stage of system resume. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add registers definition for system sleepHongbo Zhang2016-09-14-1/+60
| | | | | | | | | | | | | | | | This patch adds definitions of all the regesters necessary for system sleep. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv7: psci: make v7_flush_dcache_all public for all psci codeHongbo Zhang2016-09-14-3/+5
| | | | | | | | | | | | | | | | | | | | | | The v7_flush_dcache_all function will be called by ls102xa platform system suspend, it is necessary to make it a public call instead of a local one, but changing the LENTRY to ENTRY isn't enough, because there is another one using the same name, so this one gets a psci_ prefix. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080a: Remove debug server supportYork Sun2016-09-14-323/+1
| | | | | | | | | | | | Debug server feature has been dropped from roadmap. Signed-off-by: York Sun <york.sun@nxp.com>
| * fsl-layerscape: Add workaround for PCIe erratum A010315Hou Zhiqiang2016-09-14-0/+65
| | | | | | | | | | | | | | | | | | | | As the access to serders protocol unselected PCIe controller will hang. So disable the R/W permission to unselected PCIe controller including its CCSR, IO space and memory space according to the serders protocol field of RCW. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: csu: add an API to set R/W permission to PCIeHou Zhiqiang2016-09-14-0/+30
| | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: csu: add an API to set individual device access permissionHou Zhiqiang2016-09-14-14/+21
| | | | | | | | | | | | | | | | Add this API to make the individual device is able to be set to the specified permission. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: fsl-layerscape: move forward the non-secure access permission setupHou Zhiqiang2016-09-14-36/+10
| | | | | | | | | | | | | | | | | | | | Move forward the basic non-secure access enable operation, so the subsequent individual device access permission can override it. And collect the dispersed callers in board level, and then move them to SoC level. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: serdes: ensure accessing the initialized maps of serdes protocolHou Zhiqiang2016-09-14-9/+276
| | | | | | | | | | | | | | | | | | | | | | | | Up to now, the function is_serdes_configed() doesn't check if the map of serdes protocol is initialized before accessing it. The function is_serdes_configed() will get wrong result when it was called before the serdes protocol maps initialized. As the first element of the map isn't used for any device, so use it as the flag to indicate if the map has been initialized. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * ls1043ardb: PPA: add PPA validation in case of secure bootSumit Garg2016-09-14-0/+39
| | | | | | | | | | | | | | | | | | | | As part of Secure Boot Chain of trust, PPA image must be validated before the image is started. The code for the same has been added. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board: ls1043ardb: move sec_init to board_initSumit Garg2016-09-14-15/+17
| | | | | | | | | | | | | | | | | | | | sec_init() which was earlier called in misc_init_r() is now done in board_init() before PPA init as SEC block will be used during PPA image validation. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * driver/ddr/fsl: Revise workaround A008511 for A009803York Sun2016-09-14-36/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DDR controller 5.2.1 has this erratum A008511 partially fixed. The workaround needs to be adjusted to take advantage of Vref training. This patch enables the training and force output enable to be off. Erratum A009803 requires the controller to be idel before enabling address parity. It was combined with workaround for A008511. With new A008511 flow, this flow needs to be changed to enabling data init (D_INIT) after the address parity is enabled. Signed-off-by: York Sun <york.sun@nxp.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
| * driver/ddr/fsl: Add more debug registersYork Sun2016-09-14-6/+5
| | | | | | | | | | | | | | 32 more debug registers are added for newer DDR controllers. Signed-off-by: York Sun <york.sun@nxp.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
| * armv8: fsl-layerscape: Update ddr erratum a008336Shengzhou Liu2016-09-14-2/+4
| | | | | | | | | | | | | | | | | | DDR erratum A008336 only applies to DDR controller v5.2.0. DDR controller v5.2.1 already has default 0x43b30002 in EDDRTQCR1 register for optimal performance. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * net: fm: fix spi flash probe for using driver modelQianyu Gong2016-09-14-0/+10
| | | | | | | | | | | | | | | | | | | | | | The current code would always use the speed and mode set by CONFIG_ENV_SPI_MAX_HZ and CONFIG_ENV_SPI_MODE. But if using SPI driver model it should get the values from DT. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | kconfig: introduce kconfig for UBIHeiko Schocher2016-09-26-76/+251
| | | | | | | | | | | | | | | | | | move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-coldfireTom Rini2016-09-26-2/+30
|\ \
| * | board: amcore: update to use dm serial driverAngelo Dureghello2016-09-25-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update amcore board to use dm serial driver. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v2: - None
| * | board: amcore: add update scriptsAngelo Dureghello2016-09-25-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add some useful update scripts. Signed-off-by: Angelo Dureghello <angelo@sysam.it> --- Changes for v.2: - Fix syntax error on upgrade_jffs2 script
* | | i2c: mvtwsi.c: Add support for Marvell Armada 7K/8KStefan Roese2016-09-26-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By adding the "marvell,mv78230-i2c" compatible property, we can enable this I2C driver to support these new ARM64 chips as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Heiko Schocher <hs@denx.de>
* | | i2c: mv_i2c.c: Validate read length in I2C commandjinghua2016-09-26-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The I2C bus will get stuck when reading 0 byte. So we add validation of the read length in i2c_read(). This issue only occurs on read operation. Signed-off-by: jinghua <jinghua@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
* | | i2c: mv_i2c.c: Enable runtime speed selection (standard vs fast mode)Stefan Roese2016-09-26-7/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds runtime speed configuration to the mv_i2c driver. Currently standard (max 100kHz) and fast mode (max 400kHz) are supported. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
* | | i2c: mv_i2c.c: Add DM supportStefan Roese2016-09-26-48/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
* | | i2c: mv_i2c.c: Prepare driver for DM conversionStefan Roese2016-09-26-126/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To prepare for the DM conversion, we add a layer of compatibility functions to be used by both the legacy and the DM functions. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
* | | i2c: mv_i2c.c: Remove CONFIG_HARD_I2CStefan Roese2016-09-26-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HARD_I2C is not needed, lets remove it. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
* | | i2c: mv_i2c.c: cosmetic: Coding style cleanupsStefan Roese2016-09-26-34/+34
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some mostly indentation coding style cleanups. Also, move this driver to use debug() for debug output. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Heiko Schocher <hs@denx.de>
* | arm: mvebu: NAND support for DB-88F6820-AMCChris Packham2016-09-24-0/+14
| | | | | | | | | | | | | | Enable the NAND interface on this board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: add DB-88F6820-AMC boardChris Packham2016-09-24-0/+483
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is a plug in card for Marvell's switch system development kits. Form-factor aside it is similar to the DB-88F6820-GP with the following differences. - TCLK is 200MHz - SPI1 is used - No SATA - No MMC - NAND flash Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: create generic 88F6820 config optionChris Packham2016-09-24-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | 88F6820 is a specific Armada-38x chip that is used on the DB-88F6820-GP board. Rather than having DB_88F6820_GP and TARGET_DB_88F6820_GP which selects the former. Rename DB_88F6820_GP to 88F6820 so that other boards using the 88F6820 can be added. Stefan: Change 88F6820 for clearfog as well. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: theadorable: Configure board for PCIe 2.0 capabilityStefan Roese2016-09-24-0/+6
| | | | | | | | | | | | | | | | Use a board-specific board_sat_r_get() function to configure the board for PCIe 2.0 capability (e.g. 5GB/s link speed). Otherwise the default of 2.5GB/s will be established. Signed-off-by: Stefan Roese <sr@denx.de>
* | usb: ehci-generic: support reset control for generic EHCIMasahiro Yamada2016-09-23-0/+13
| | | | | | | | | | | | | | This driver is designed in a generic manner, so resets should be handled generically as well. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | reset: add no-op stubs for optional reset controlMasahiro Yamada2016-09-23-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | My motivation for this patch is to make reset control handling optional for generic drivers. I want to add reset control to drivers/usb/host/ehci-generic.c, but it is used by several platforms, some will implement a reset controller driver, some will not. Add no-op stubs in order to avoid link error for drivers that implement reset controlling, but still it is optional. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | errno.h: sync error macros with linux 4.8-rc7Masahiro Yamada2016-09-23-11/+46
| | | | | | | | | | | | | | | | | | | | | | For synchronization, import macros from - include/uapi/asm-generic/errno-base.h - include/uapi/asm-generic/errno.h - include/linux/errno.h of Linux 4.8-rc7. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Move ENOTSUPP defines to include/linux/errno.hMasahiro Yamada2016-09-23-6/+2
| | | | | | | | | | | | Collect a couple of duplicated defines into a single place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Move error macros from <asm-generic/errno.h> to <linux/errno.h>Masahiro Yamada2016-09-23-140/+126
| | | | | | | | | | | | | | | | | | | | | | There are no files that include <asm-generic/errno.h> any more. Move error macro defines to include/linux/errno.h and remove include/asm-generic/errno.h. Going forward, please include <linux/errno.h> when you need error macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Remove arch/${ARCH}/include/asm/errno.hMasahiro Yamada2016-09-23-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlike Linux, nothing about errno.h is arch-specific in U-Boot. As you see, all of arch/${ARCH}/include/asm/errno.h is just a wrapper of <asm-generic/errno.h>. Actually, U-Boot does not export headers to user-space, so we just have to care about the consistency in the U-Boot tree. Now all of include directives for <asm/errno.h> are gone. Deprecate <asm/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
* | treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-263/+263
| | | | | | | | | | | | | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Add <linux/errno.h> as a wrapper of <asm-generic/errno.h>Masahiro Yamada2016-09-23-0/+6
| | | | | | | | | | | | | | This will be used to consolidate errno.h variants. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-09-20 03:50:36 +0000