summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* arch/powerpc/cpu/mpc512x/i2c.c: Fix GCC 4.6 warningsAnatolij Gustschin2011-11-16-2/+1
| | | | | | | | | Fix: i2c.c: In function 'wait_for_bb': i2c.c:81:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* arch/powerpc/cpu/mpc512x/pci.c: Fix GCC 4.6 warningsAnatolij Gustschin2011-11-16-2/+0
| | | | | | | | | Fix: pci.c: In function 'pci_init_board': pci.c:55:26: warning: variable 'pci_conf' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* board/esd/cpci750/sdram_init.c: Fix GCC 4.6 build warningsWolfgang Denk2011-11-16-314/+193
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: sdram_init.c: In function 'check_dimm': sdram_init.c:267:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:253:16: warning: variable 'spd_checksum' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1693:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1693:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Biggest part o the fix is converting the custom debug code to standard debug(). No attempts were made to cleanup the code. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* board/esd/cpci750/cpci750.c: Fix error handlingWolfgang Denk2011-11-16-2/+2
| | | | | | | | | | | ThE code recorded error conditions but did not pass these on to the higher level caller. Fixing this fixes also this build warning: cpci750.c: In function 'do_loadpci': cpci750.c:569:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* drivers/video/ct69000.c: Fix GC 4.6 build warningWolfgang Denk2011-11-16-5/+7
| | | | | | | | | | | Convert custom debug code to use standard debug() facility. This also fixes these build warning: ct69000.c: In function 'FindAndSetPllParamIntoXrRegs': ct69000.c:706:28: warning: variable 'new_pixclock' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* common/cmd_universe.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-16-3/+1
| | | | | | | | | Fix: cmd_universe.c: In function 'universe_init': cmd_universe.c:49:17: warning: variable 'lastError' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* common/cmd_fdc.c: Fix GCC 4.6 build warningsWolfgang Denk2011-11-16-12/+17
| | | | | | | | | | | | | | | Fix: cmd_fdc.c: In function 'fdc_read_data': cmd_fdc.c:435:6: warning: variable 'flags' set but not used [-Wunused-but-set-variable] cmd_fdc.c:432:16: warning: variable 'pcn' set but not used [-Wunused-but-set-variable] cmd_fdc.c:431:20: warning: variable 'lastblk' set but not used [-Wunused-but-set-variable] Note: no attempts were made to otherwise cleanup the code. Signed-off-by: Wolfgang Denk <wd@denx.de>
* board/evb64260/zuma_pbb_mbox.c: Fix GCC 4.6 build warningsWolfgang Denk2011-11-16-7/+18
| | | | | | | | | | | Fix: zuma_pbb_mbox.c: In function 'zuma_mbox_dump': zuma_pbb_mbox.c:115:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] zuma_pbb_mbox.c:117:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Wolfgang Denk <wd@denx.de>
* board/evb64260/zuma_pbb_mbox.c: CodingStyle cleanupWolfgang Denk2011-11-16-124/+132
| | | | | | Make (mostly) checkpatch-clean Signed-off-by: Wolfgang Denk <wd@denx.de>
* board/evb64260/sdram_init.c: Fix GCC 4.6 build warningsWolfgang Denk2011-11-16-2/+5
| | | | | | | | | | | | Fix: sdram_init.c: In function 'setup_sdram_common': sdram_init.c:333:49: warning: variable 'ecc' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'setup_sdram': sdram_init.c:410:13: warning: variable 'check' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* board/evb64260/eth.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-16-18/+19
| | | | | | | | | Fix: eth.c: In function 'gt6426x_handle_SMI': eth.c:130:15: warning: variable 'psr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* board/evb64260/evb64260.c: Fix GC 4.6 build warningWolfgang Denk2011-11-16-1/+2
| | | | | | | | | Fix: evb64260.c: In function 'debug_led': evb64260.c:363:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* board/evb64260/i2c.c: Fix GCC 4.6 build warningsWolfgang Denk2011-11-16-2/+1
| | | | | | | | | | | Fix: i2c.c: In function 'i2c_init': i2c.c:23:15: warning: variable 'actualFreq' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Eran Man <eran@nbase.co.il> Acked-by: Heiko Schocher <hs@denx.de>
* board/evb64260/i2c.c: Coding Style cleanupWolfgang Denk2011-11-16-26/+22
| | | | | | | Make checkpatch-clean Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Eran Man <eran@nbase.co.il>
* drivers/block/sym53c8xx.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-16-2/+0
| | | | | | | | | Fix: sym53c8xx.c: In function 'scsi_write_dsp': sym53c8xx.c:456:16: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* drivers/block/sata_sil3114.c: Fix GCC 4.6 build warningKumar Gala2011-11-16-0/+4
| | | | | | | | | | | | | | | | | | Fix: sata_sil3114.c: In function 'scan_sata': sata_sil3114.c:793:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:794:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:795:39: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:795:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:797:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:800:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:801:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:802:39: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:802:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:804:7: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* drivers/bios_emulator/x86emu/ops.c: Fix GCC 4.6 build warningKumar Gala2011-11-16-11/+4
| | | | | | | | | | | | | | | Fix: x86emu/ops.c: In function 'x86emuOp_int3': x86emu/ops.c:3521:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_int_IMM': x86emu/ops.c:3549:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_into': x86emu/ops.c:3579:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_aad': x86emu/ops.c:3993:8: warning: variable 'a' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* drivers/block/ahci.c: Fix GCC 4.6 build warningKumar Gala2011-11-16-3/+0
| | | | | | | | | Fix: ahci.c: In function 'ata_scsiop_read10': ahci.c:564:6: warning: variable 'lba' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* davinci, mmc: fix gcc 4.6 build warningsHeiko Schocher2011-11-16-4/+3
| | | | | | | | | | | | | | Fix: davinci_mmc.c: In function 'dmmc_wait_fifo_status': davinci_mmc.c:72:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable] davinci_mmc.c: In function 'dmmc_busy_wait': davinci_mmc.c:89:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable] Delete the unused variable. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* FPGA: drivers/fpga/ivm_core.c: GCC4.6 fix build warningsStefano Babic2011-11-16-2/+0
| | | | | | | | | Fix: ivm_core.c: In function 'ispVMLCOUNT': ivm_core.c:2105:16: warning: unused variable 'usByte' Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2011-11-16-4647/+4944
|\ | | | | | | | | | | | | | | | | | | * 'master' of /home/wd/git/u-boot/custodians: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
| * Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2011-11-16-4647/+4944
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-video: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
| | * api: export LCD device to external appsChe-Liang Chiou2011-11-15-1/+210
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch exports LCD info-query and bitmap-rendering functions to external apps. This patch is tested on a Seaboard. Because the LCD driver is not yet upstreamed, the test was done in a local downstream repo. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
| | * font: split font data from video_font.hChe-Liang Chiou2011-11-15-4614/+4647
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While video_font.h is useful even without referencing the font data, it is not possible to be included multiple times because it defines font data array right in the header. This patch splits the font data array into video_font_data.h and so now video_font.h can be included multiple times. This at least solves the code duplication in board/mcc200/lcd.c. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * tools: logo: split bmp arrays from bmp_logo.hChe-Liang Chiou2011-11-15-21/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generated header bmp_logo.h is useful even outside common/lcd.c for the logo dimension. However, the problem is, the generated bmp_logo.h cannot be included multiple times because bmp_logo_palette[] and bmp_logo_bitmap[] are defined in the bmp_logo.h. This patch fixes this by defining these arrays in another header bmp_logo_data.h and in bmp_logo.h only declaring these arrays. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * lcd: add clear and draw bitmap declarationChe-Liang Chiou2011-11-15-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions for clearing and drawing bitmaps on the screen were not exposed publicly and are made public in this patch in preparation for implementing the display interface of api_public.h. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * VIDEO: mx3fb: GCC4.6 fix build warningsStefano Babic2011-11-10-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix: mx3fb.c: In function 'video_hw_init': mx3fb.c:827:30: warning: variable 'vesa_idx' set but not used Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de>
| | * Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bugJerry Huang2011-11-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | When the resolution is set to 800x600 and 1024x768, but, the driver will use 1280x1024 resolution to set the DIU register Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Acked-by: Timur Tabi <timur@freescale.com>
* | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2011-11-16-6487/+21354
|\ \ \ | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of /home/wd/git/u-boot/custodians: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
| * | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-11-16-6487/+21354
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
| | * | arm, davinci: add DAVINCI_MMC_CLKIDHeiko Schocher2011-11-15-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | arm, davinci_emac: fix driver bug if more then 3 PHYs are detectedHeiko Schocher2011-11-15-8/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | since commits: davinci: emac: add support for more than 1 PHYs 062fe7d332c28ede25626f448681e43d76bb312e davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM fb1d6332b5430b90a8fa8ebab709f33a60e9f816 I get following warning on the enbw_cmc board: Err: serial Net: 5 ETH PHY detected miiphy_register: non unique device name 'KSZ8873 @ 0x01' DaVinci-EMAC Hit any key to stop autoboot: 0 Also I see some debug printfs: => run load + emac_close + emac_ch_teardown - emac_ch_teardown + emac_ch_teardown - emac_ch_teardown - emac_close + emac_open - emac_open Using DaVinci-EMAC device reason is 062fe7d332c28ede25626f448681e43d76bb312e new define MAX_PHY. This is set to 3! I get on this board 5 active phys, so this leads in wrong memory writes ... so I changed: - define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT to set the MAX_PHY value, add a description in README for the new CONFIG_SYS option. - print an error message if more then MAX_PHYs are detected. - fill the active_phy_addr array in a for loop with 0xff - changed printf() in debug_emac() Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Wolfgang Denk <wd@denx.de> Cc: Manjunath Hadli <manjunath.hadli@ti.com> Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Tom Rini <tom.rini@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | arm, davinci: da850/dm365 lowlevel cleanupHeiko Schocher2011-11-15-125/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Cleanup a lot of fix values, and use defines instead. - Also make some values configurable through the board config file. - delete the NAND_SPL code for da850, as it is not used actually - remove the asm code Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Tom Rini <tom.rini@gmail.com> Cc: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | omap5: Add omap5_evm board build support.Sricharan2011-11-15-8/+286
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the build support for the omap5_evm board. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | omap4/5: Add support for booting with CH.Sricharan2011-11-15-73/+248
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Configuration header(CH) is 512 byte header attached to an OMAP boot image that will help ROM code to initialize clocks, SDRAM etc and copy U-Boot directly into SDRAM. CH can help us in by-passing SPL and directly boot U-boot, hence it's an alternative for SPL. However, we intend to support both CH and SPL for OMAP4/5. Initialization done through CH is limited and is not equivalent to that done by SPL. So U-Boot has to distinguish between the two cases and handle them accordingly. This patch takes care of doing this. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | omap5: emif: Add emif/ddr configurations required for omap5 evmSricharan2011-11-15-1234/+1549
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the emif configurations required for omap5 soc.Add the correct ddr part configurations required for omap5 evm board. EDB8164B3PH from ELPIDA is the part used on the board. Also changes are done to retain some part of the code common for OMAP4/5 and keep only the remaining in the Soc specific directories. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | omap5: clocks: Add clocks support for omap5 platform.Sricharan2011-11-15-474/+1735
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding the correct configurations required for dplls, clocks, for omap5 Soc. Also changes are done to retain some part of the code common for OMAP4/5 and move only the remaining to the Soc specific directories. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | omap5: Add minimal support for omap5430.Sricharan2011-11-15-354/+2156
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the minimal support for OMAP5. The platform and machine specific headers and sources updated for OMAP5430. OMAP5430 is Texas Instrument's SOC based on ARM Cortex-A15 SMP architecture. It's a dual core SOC with GIC used for interrupt handling and SCU for cache coherency. Also moved some part of code from the basic platform support that can be made common for OMAP4/5. Rest is kept out seperately. The same approach is followed for clocks and emif support in the subsequent patches. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | omap: Checkpatch fixesSricharan2011-11-15-30/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixing them here so that when the files are reused in subsequent patches for omap5, avoids new checkpatch warnings. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | omap4: make omap4 code common for future reuseSricharan2011-11-15-9/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Much of omap4 soc support code can be reused for omap5. Move them to the omap-common directory to facilitate this. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | * | GCC4.6: Squash warnings in onenand_base.cMarek Vasut2011-11-15-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | onenand_base.c: In function ‘onenand_do_lock_cmd’: onenand_base.c:1946:6: warning: variable ‘wp_status_mask’ set but not used [-Wunused-but-set-variable] onenand_base.c: In function ‘onenand_check_maf’: onenand_base.c:2229:8: warning: variable ‘name’ set but not used [-Wunused-but-set-variable] onenand_base.c: In function ‘flexonenand_get_boundary’: onenand_base.c:2258:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Scott Wood <scottwood@freescale.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
| | * | GCC4.6: Fix common/usb.c on xscaleMarek Vasut2011-11-15-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem was that the code, when the function was compiled with -Os, was misgenerated. As in the function description, this is likely another manifestation of the bug in GCC. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
| | * | OneNAND: Add simple OneNAND SPLMarek Vasut2011-11-15-0/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces small OneNAND loader, fitting into 1kB of space (smallest possible OneNAND RAM size). Some devices equipped with such crappy chips will use this. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Scott Wood <scottwood@freescale.com> V2: Introduce spl_onenand_load_image() to load data from OneNAND in SPL V3: Cleanup, align with nand_spl. Skip whole blocks.
| | * | PXA: vpac270: Enable the new generic MMC driverMarek Vasut2011-11-15-1/+11
| | | | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| | * | PXA: Cleanup serial_pxaMarek Vasut2011-11-15-387/+297
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Cleanup register definitions by introducing new regs-uart.h, compliant with rest of U-Boot. * Remove old register definitions from pxa-regs.h * Convert serial_pxa to new regs-uart.h * Cleanup serial_pxa Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| | * | PXA: Drop csb226 and innokom boards (unmaintained)Marek Vasut2011-11-15-2251/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Robert Schwebel <robert@schwebel.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
| | * | m28evk: Fix comment about the number of RAM banksFabio Estevam2011-11-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | m28evk has one bank of RAM. Fix the comment. Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
| | * | mx31: Fix checkpatch warnings in generic.cFabio Estevam2011-11-11-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix checkpatch warnings in generic.c. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | mx31: Use proper IO accessor for GPR registerFabio Estevam2011-11-11-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use proper IO accessor for GPR register. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | mx31: Remove duplicate definition for GPR registerFabio Estevam2011-11-11-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GPR register definition is already available at imx-regs.h, so remove the duplication. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-22 14:15:57 +0000