summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sunxi_nand_spl: Add config parameter for 4KiB page sized NAND devicesStefan Roese2015-09-10-0/+1
| | | | | | | | | | This patch adds support for NAND chips with 4KiB page size and 24/1024 ECC strength. Like the Micron MT29F32G08CBACAWP which is used on the ICnova-A20 SoM. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Ensure that 'mksunxiboot' tool produces deterministic outputSiarhei Siamashka2015-09-10-1/+1
| | | | | | | | | | | | | | | | | | | | Currently some uninitialized padding bytes are written to the output file, as can be confirmed with valgrind: $ valgrind tools/mksunxiboot spl/u-boot-spl.bin spl/sunxi-spl.bin ==5581== Syscall param write(buf) points to uninitialised byte(s) ==5581== at 0x4F0F940: __write_nocancel (in /lib64/libc-2.20.so) ==5581== by 0x400839: main (in /tmp/u-boot/tools/mksunxiboot) ==5581== Address 0xffeff5d3c is on thread 1's stack ==5581== in frame #1, created by main (???) This patch fixes the problem by clearing the whole structure instead of just a portion of it. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Fix wrong serial console setup in Forfun Q88DB tabletSiarhei Siamashka2015-09-10-1/+1
| | | | | | | | | | | | The Forfun Q88DB tablet was unbootable since commit b6006baf9c2553543e3384983d23d95efbf24fa6 ("sunxi: Move all boards to the driver-model"). Appears that this is caused by the wrong serial console setup in the SPL. The serial console should use PG3/PG4 pins according to the FEX file. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun5i: Add A10s-Wobo-i5 defconfig and dtsJelle van der Waa2015-09-10-0/+252
| | | | | | | | | | | | | | The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. The dts file changes are identical to the changes submitted to the upstream kernel. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sun5i: Add q8_a13_tablet defconfig and dtsHans de Goede2015-09-10-0/+331
| | | | | | | | | | | | | | | | | | | | | | This commits adds a generic support for q8 formfactor a13 based tablets. These tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. ATM the kernel does not support the touchscreen / accelerometer on these devices. In the future we may need multiple configs with different CONFIG_DEFAULT_DEVICE_TREE settings, this depends on how we solve the hw differences on the kernel side. For now this will suffice. The dts files are identical to the dts files submitted to the upstream kernel for these tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add dts and defconfig for iNet-1 based tabletsHans de Goede2015-09-10-0/+250
| | | | | | | | | | | | | | | | | The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add defconfig and dts for inet9f-rev03 based tabletsHans de Goede2015-09-10-0/+241
| | | | | | | | | | | | | | | | The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sun4i: Add defconfig and dts for the pov protab2-ips9 tabletHans de Goede2015-09-10-1/+233
| | | | | | | | | | | The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. The dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Prepare v2015.10-rc3Tom Rini2015-09-07-1/+1
| | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-usbTom Rini2015-09-07-35/+426
|\
| * usb: ehci: remember init modeStephen Warren2015-09-07-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When an EHCI device is registered in device mode, the HW isn't actually initialized at all, and hence isn't left in a running state. Consequently, when the device is deregistered, ehci_shutdown() will fail, since the HW bits it expects to see set in response to its shutdown requests will not be sent, and the message "EHCI failed to shut down host controller." will be printed. Fix ehci-hcd.c to remember whether the device was registered in host or device mode, and only call ehci_shutdown() for host mode registrations. Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfigLukasz Majewski2015-09-07-0/+1
| | | | | | | | | | | | | | This commit enables support for DFU_TFTP on the am335x bone black device. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * dfu: tftp: Kconfig: Add Kconfig entry for dfu tftp featureLukasz Majewski2015-09-07-0/+10
| | | | | | | | | | | | | | | | The dfu tftp feature can be now enabled via Kconfig. This commit provides necessary code for it. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * dfu: command: Extend "dfu" command to handle receiving data via TFTPLukasz Majewski2015-09-07-0/+20
| | | | | | | | | | | | | | | | The "dfu" command has been extended to support transfers via TFTP protocol. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * update: tftp: dfu: Extend update_tftp() function to support DFULukasz Majewski2015-09-07-14/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code allows using DFU defined mediums for storing data received via TFTP protocol. It reuses and preserves functionality of legacy code at common/update.c. The update_tftp() function now accepts parameters - namely medium device name and its number (e.g. mmc 1). Without this information passed old behavior is preserved. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * dfu: tftp: update: Add dfu_write_from_mem_addr() functionLukasz Majewski2015-09-07-0/+52
| | | | | | | | | | | | | | | | | | | | | | This function allows writing via DFU data stored from fixed buffer address (like e.g. loadaddr env variable). Such predefined buffers are used in the update_tftp() code. In fact this function is a wrapper on the dfu_write() and dfu_flush(). Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * dfu: tftp: update: Provide tftp support for the DFU subsystemLukasz Majewski2015-09-07-0/+92
| | | | | | | | | | | | | | | | This commit adds initial support for using tftp for downloading and upgrading firmware on the device. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * tftp: update: Allow some parts of the code to be reused when ↵Lukasz Majewski2015-09-07-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_NO_FLASH is set Up till now it was impossible to use code from update.c when system was not equipped with raw FLASH memory. Such behavior prevented DFU from reusing this code. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * net: tftp: Move tftp.h file from ./net to ./include/netLukasz Majewski2015-09-07-4/+4
| | | | | | | | | | | | | | | | | | | | This change gives the ability to reuse the <tftp.h> header file by other subsystems (like e.g. dfu). Without this change compilation error emerges for the legacy update.c file. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * doc: dfu: tftp: README entry for TFTP extension of DFULukasz Majewski2015-09-07-0/+121
| | | | | | | | | | | | | | | | | | | | Documentation file for DFU extension. With this functionality it is now possible to transfer FIT images with firmware updates via TFTP and use DFU backend for storing them. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * h2200: Fix build errorKishon Vijay Abraham I2015-09-07-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit <8bfc288c3955> ("usb: gadget: ether: Perform board initialization from ethernet gadget driver") added board_usb_init and board_usb_cleanup in ethernet gadget driver. But h2200 board didn't have board_usb_init and board_usb_cleanup implementations. This introduced the following build errors +drivers/usb/gadget/built-in.o: In function `usb_eth_halt': +drivers/usb/gadget/ether.c:2498: undefined reference to `board_usb_cleanup' +drivers/usb/gadget/built-in.o: In function `usb_eth_init': +drivers/usb/gadget/ether.c:2316: undefined reference to `board_usb_init' Fix it here by adding empty board_usb_init and board_usb_cleanup functions in h2200.c. Fixes: <8bfc288c3955> ("usb: gadget: ether: Perform board initialization from ethernet gadget driver") Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
| * dfu: Delete superfluous initialization of the dfu_buf_size static variableLukasz Majewski2015-09-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | After extension of the dfu_get_buf() to also setup (implicitly) the dfu_buf_size variable it is not needed to set dfu_buf_size to CONFIG_SYS_DFU_DATA_BUF_SIZE. This variable is set in the dfu_get_buf() by not only considering CONFIG_SYS_DFU_DATA_BUF but more importantly the "dfu_bufsiz" env variable. Therefore, dfu_get_buf() should be used for initialization. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Przemyslaw Marczak <p.marczak@samsung.com>
| * dfu:tests: Modify dfu_gadget_test.sh to accept USB device vendor:product IDLukasz Majewski2015-09-07-8/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | dfu-util allows filtering on USB device vendor:product ID by using the -d flag (-d 0451:d022). Such option is very handy when many DFU devices are connected to a single host PC. This commit allows testing when above situation emerges. Signed-off-by: Lukasz Majewski <l.majewski@majess.pl> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Lukasz Majewski <l.majewski@majess.pl> Test HW - AM335x Beagle Bone Black NOTE: Max size of file to transfer: 2MiB
| * usb: gadget: f_thor: Allocate request up to THOR_PACKET_SIZESiva Durga Prasad Paladugu2015-09-07-1/+1
| | | | | | | | | | | | | | | | | | | | Allocate request up to THOR_PACKET_SIZE not the ep0->maxpacket as the descriptors data depend on the number of descriptors and this 64 bytes were not enough and the buffer might overflow which results in memalign failures later. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * f_thor: Dont perform reset at the end of thorSiva Durga Prasad Paladugu2015-09-07-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | Dont perform reset at the end of thor download if configured to do reset off. Reset may not be required in all cases and hence provided an option to do so. The case would be to download the images to DDR instead of flash device. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * implement Fastboot via USB OTG on bcm28155_ap boardsJiandong Zheng2015-09-07-0/+19
| | | | | | | | | | Signed-off-by: Jiandong Zheng <jdzheng@broadcom.com> Signed-off-by: Steve Rae <srae@broadcom.com>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-09-07-31/+4851
|\ \
| * | net: altera_tse: Zap unused variableMarek Vasut2015-09-04-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Zap variable which is set but never used. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Thomas Chou <thomas@wytron.com.tw>
| * | arm: socfpga: Add support for the Terasic DE-0 Atlas boardDinh Nguyen2015-09-04-0/+1567
| | | | | | | | | | | | | | | | | | | | | Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | arm: socfpga: Add support for DENX MCV SoM and MCVEVK boardMarek Vasut2015-09-04-0/+1578
| | | | | | | | | | | | | | | | | | | | | | | | Add support for DENX MCV SoM, which is CycloneV based and the associated DENX MCVEVK baseboard. The board can boot from eMMC. Ethernet and USB is supported. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: socfpga: Add support for Terasic SoCkit boardMarek Vasut2015-09-04-0/+1622
| | | | | | | | | | | | | | | | | | | | | | | | Add support for Terasic SoCkit, which is CycloneV based board. The board can boot either from SD/MMC or QSPI. Ethernet is also supported. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: socfpga: Do not call board_init_r() from board_init_f()Marek Vasut2015-09-04-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of calling board_init_r() directly from board_init_f(), just return from board_init_f(). This will make the code continue executing in crt0.S _main(), from which the board_init_r() is called. This patch aligns the SoCFPGA SPL with the correct SPL design as well as reduces the stack utilisation slightly. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | arm: socfpga: Zap OF_CONTROL checks, it's always enabledMarek Vasut2015-09-04-4/+3
| | | | | | | | | | | | | | | | | | | | | The CONFIG_OF_CONTROL and CONFIG_SPL_OF_CONTROL is always enabled on Altera SoCFPGA, remove the unnecessary checks. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: socfpga: Always enable OF_CONTROL and SPL_OF_CONTROLMarek Vasut2015-09-04-0/+2
| | | | | | | | | | | | | | | | | | | | | The SoCFPGA probes mostly from OF and the OF is mandatory both in U-Boot itself and U-Boot SPL. Enable it by default. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: socfpga: Assure ISWGRP 0 and 1 are initedMarek Vasut2015-09-04-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fix makes sure that the ISWGRP0 and ISWGRP1 registers are correctly inited. In case those registers are not initialized, it is not possible to access the registers synthesised in the FPGA through the bridges. Any such access produces data abort. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | mmc: dw_mmc: Probe the MMC from OFMarek Vasut2015-09-04-22/+72
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Rework the driver to probe the MMC controller from Device Tree and make it mandatory. There is no longer support for probing from the ancient qts-generated header files. This patch now also removes previous temporary workaround. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com>
* | arc: make AXS101 default platformAlexey Brodkin2015-09-07-4/+3
|/ | | | | | | | | | | | | | | | | | This fixes building in automated flow that doesn't use defconfigs. See discussion on that topic here: http://patchwork.ozlabs.org/patch/502558/ See similar patches for other architectures/platforms here: [1] http://git.denx.de/?p=u-boot.git;a=commit;h=ff560a13056a565a4e9ce1761bd04276a3cace88 [2] http://git.denx.de/?p=u-boot.git;a=commit;h=589907e2c187ec69b351c38ccda36730d25ab5d6 And while at it add missing shell prompt to axs103. Cc: Tom Rini <trini@konsulko.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* doc: document the fdtdir PXE commandStefan Brüns2015-09-03-0/+7
| | | | Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
* doc: Fix inconsistent filename in PXE config exampleStefan Brüns2015-09-03-1/+1
| | | | | | The default config includes base.menu, not linux.list Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2015-09-03-42/+11350
|\
| * rockchip: Put README image creation commands on one lineSimon Glass2015-09-02-3/+5
| | | | | | | | | | | | | | It is easier to paste these into the command line if they are a single common. Use line continuation instead of separate lines. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Update todo in README.rockchipSjoerd Simons2015-09-02-1/+0
| | | | | | | | | | | | | | | | MMC support works now, so it can be dropped from the todo Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Drop first 32kb of zeros from the rkSD image typeSjoerd Simons2015-09-02-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of creating a rockchip SPL SD card image with 32KB of zeros which can be written to the start of an SD card, create the images with only the useful data that should be written to an offset of 32KB on the SD card. The first 32 kilobytes aren't needed for bootup and only serve as convenient way of accidentally obliterating your partition table. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * arm: Turn of d-cache before i-cacheSjoerd Simons2015-09-02-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Booting the kernel fails on RK3288 (and probably other rockchip SoCs) when the i-cache is disabled/flushed before d-cache. I have not investigated whether this is due to U-Boot hanging or whether it's very early in the linux boot, but following the approach of the various rockchip U-Boot forks (first disable d-cache then i-cache) makes things work. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add config_distro_bootcmd supportSjoerd Simons2015-09-02-0/+21
| | | | | | | | | | | | | | | | | | | | | | Now that MMC works in U-Boot add config distro command support to start Linux in a standard fashion. One oddity here is that linux fails to load when the fdt is relocated to above 512MB, so set fdt_high to make sure it's loaded below that. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Turn off CONFIG_SPL_LED for fireflySjoerd Simons2015-09-02-1/+0
| | | | | | | | | | | | | | | | | | | | With LED support enabled the SPL easily goes over the size limit (e.g. with both Debians gcc 4.9 and 5.2 cross-compilers). Turn off LED support in the SPL to reduce the size just enough for those compilers. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tweaked commit subject to remove _SUPPORT Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Disable sdio mmc slot on rk3288-fireflySjoerd Simons2015-09-02-1/+1
| | | | | | | | | | | | | | | | | | U-Boot can't use the sdio card so turn it of to prevent things getting confused/struck when trying to use the card as storage. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * mmc: Probe DM based mmc devices in u-bootSjoerd Simons2015-09-02-4/+39
| | | | | | | | | | | | | | | | | | During mmc initialize probe all devices with the MMC Uclass if build with CONFIG_DM_MMC Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * doc: Fix reference to Rock pro when Rock 2 is meantSjoerd Simons2015-09-02-3/+3
| | | | | | | | | | | | | | | | | | | | | | The Radxa Rock pro board is rk3188 based and thus won't work with U-Boot built for RK3288. Change the documentation to refer to the intended board, the Radxa Rock 2, which is an RK3288-based design very similar to the firefly Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add a simple READMESimon Glass2015-09-02-0/+246
| | | | | | | | | | | | Add a few notes on how to try out the Rockchip support so far. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-12-24 13:16:12 +0000