summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
| * | sunxi: mctl_mem_matches: Add missing memory barrierHans de Goede2016-04-27-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are running with the caches disabled when mctl_mem_matches gets called, but the cpu's write buffer is still there and can still get in the way, add a memory barrier to fix this. This avoids mctl_mem_matches always returning false in some cases, which was resulting in: U-Boot SPL 2015.07 (Apr 14 2016 - 18:47:26) DRAM: 1024 MiB U-Boot 2015.07 (Apr 14 2016 - 18:47:26 +0200) Allwinner Technology CPU: Allwinner A23 (SUN8I) DRAM: 512 MiB Where 512 MiB is the right amount, but the DRAM controller would be initialized for 1024 MiB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | omap3: Reduce logic/overo SPL max image sizeTom Rini2016-04-27-2/+2
|/ | | | | | | | | | | | While the OMAP3 has 64KiB of SRAM, per the TRM the download area is only from 0x40200000 to 0x4020F000 and exceeding that will cause failure to boot. Further, we need to make sure that we don't run into SRAM_SCRATCH_SPACE_ADDR as once SPL is running we will write values there and would corrupt our running image. Cc: Adam Ford <aford173@gmail.com> Cc: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM64: zynqmp: Cleanup config file after CMD moveMichal Simek2016-04-26-4/+0
| | | | | | | | | The patch: "configs: Re-sync almost all of cmd/Kconfig" (sha1: 78d1e1d0a157c8b48ea19be6170b992745d30f38) doesn't remove empty if-endif. This patch is fixing it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* ARM: uniphier: revive some commands lost by Kconfig re-syncMasahiro Yamada2016-04-26-0/+2
| | | | | | | The recently added uniphier_ld20_defconfig missed the tree-wide re-sync by commit 89cb2b5f8be4 ("configs: Re-sync with cmd/Kconfig"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2016-04-26-4/+7
|\
| * exynos: Set CNTFRQAlexander Graf2016-04-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 73a1cb27 moved the check whether we should set the architected timer frequency from CONFIG_SYS_CLK_FREQ to CONFIG_TIMER_CLK_FREQ, but did not update all users of it. The one where I (finally) realized why KVM didn't work is the Arndale board, so this patch adds the respective define to it. Signed-off-by: Alexander Graf <agraf@suse.de> Fixes: 73a1cb27 Reviewed-by: York Sun <york.sun@nxp.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * odroid: Update README with correct firmware link and XU4 supportShawn Guo2016-04-14-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The firmware from link [1] only works with U-Boot image that is no bigger than 328KiB. Using it with the default mainline U-Boot today which is already around 500KiB is just not working. Correct the link to be hardkernel_1mb_uboot one [2], so that users can get mainline U-Boot work out of box. While at it, the README is updated to include XU4 support, like DTB file name. [1] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel [2] https://github.com/hardkernel/u-boot/tree/odroidxu3-v2012.07/sd_fuse/hardkernel_1mb_uboot Signed-off-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Prepare v2016.05-rc3Tom Rini2016-04-25-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | pico-imx6ul: Update the defconfigTom Rini2016-04-25-9/+18
| | | | | | | | | | | | | | | | | | The defconfig/config.h file were merged but were already out of sync with mainline. This brings them further into line now. Cc: Richard Hu <richard.hu@technexion.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2016-04-25-1/+1
|\ \
| * | drivers/video/am335x-fb: Fix bits for LCD_PALMODE_RAWDATA definitionMartin Pietryka2016-04-25-1/+1
| | | | | | | | | | | | | | | | | | | | | According to the TRM you have to set bits [21:20] to 0b10 for RAW mode, so (0x10 << 20) is obviously wrong here. Signed-off-by: Martin Pietryka <martin.pietryka@chello.at>
* | | pci: Device scanning range fixYoshinori Sato2016-04-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The terminal condition in the area where a PCI device is scanned is wrong, and 1f.7 isn't scanned. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | mmc: sdhci: add const qualifier to the name of struct sdhci_hostMasahiro Yamada2016-04-25-4/+4
| | | | | | | | | | | | | | | | | | | | | This allows to drop annoying (char *) casts when setting the host name of struct sdhci_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | ARM: DRA7: Add ABB setup for all domainsNishanth Menon2016-04-25-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | | ARM: OMAP5: Enable ABB configuration for MM voltage domainNishanth Menon2016-04-25-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we setup the voltage and frequency for the MM domain, we *must* setup the ABB configuration needed for the domain as well. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>
* | | ARM: OMAP5/DRA7: Move ABB TXDONE mask to voltage structureNishanth Menon2016-04-25-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ABB TX_DONE mask will vary depending on ABB module. For example, 3630 never had ABB on IVA domain, while OMAP5 does use ABB on MM domain, DRA7 has it on all domains with the exception of CORE, RTC. Hence, move the txdone mask definition over to structure describing voltage domain. Signed-off-by: Nishanth Menon <nm@ti.com>
* | | ARM: OMAP5/DRA7: Get rid of control_std_fuse_opp_vdd_mpu_2Nishanth Menon2016-04-25-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This information is already available under vcores->volts.efuse.reg. There is no reason for duplicating the information since AVS Class 0 definitions are common for OMAP5 and DRA7 and defined with STD_FUSE_OPP_* macros. This allows a central location of defining the ABB and voltage definitions especially since they are reused. This also makes it simpler to prevent mistakes involved when changing the boot OPP for the device. Signed-off-by: Nishanth Menon <nm@ti.com>
* | | common/dlmalloc.c: Delete content that was moved to malloc.hRobert P. J. Day2016-04-25-929/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove several hundred lines of content surrounded by: #if 0 /* Moved to malloc.h */ ... moved stuff ... #endif /* 0 */ /* Moved to malloc.h */ Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | spl: spl_mmc: Disambiguate error messageFabio Estevam2016-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The error message "spl: mmc block read error" may come from two different functions, so we should better annotate the function name where the error comes from to help debugging. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: hikey: Simplify README instructions.Peter Griffin2016-04-25-46/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates and simplifies the hikey README. The old instructions were hard to follow, and convoluted. This patch also updates the link to the mcuimage.bin which was outdated. Using an outdated mcuimage.bin results in the additional a53 cores not coming online when the kernel issues PSCI requests to arm trusted firmware (ATF). Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: hisilicon: hikey: Align memory node with upstream kernelPeter Griffin2016-04-25-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory node gets automatically generated by U-Boot in arch_fixup_fdt(), before passing control to the kernel using U-Boots representation of the dram banks. However the upstream kernel uses the memory node to carve-out regions of RAM for various purposes. To make this work without changing arch_fixup_fdt() which will effect many platforms we replicate the upstream memory node layout using the dram banks. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: hisilicon: hikey: dts: Add pl011 additional clock binding.Peter Griffin2016-04-25-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | This is a binding which only exists in U-Boot, but is required to get working serial in U-Boot. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: hisilicon: hikey: Implement reset_cpu() for hikey.Peter Griffin2016-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the reset command to reset the board from u-boot. => reset resetting ... INFO: BL1: 0xf9810000 - 0xf9818000 [size = 32768] NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.1(debug):7fb9b0e NOTICE: BL1: Built : 17:06:41, Apr 19 2016 Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.Peter Griffin2016-04-25-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently only the serial pl01x driver is using DT, and the other drivers still use platform data but as more DT lands in the upstream kernel the aim is to migrate the other drivers over to DT as well to have a fully DT configured hikey u-boot. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | MAINTAINERS: Add myself as maintainer for hikeyPeter Griffin2016-04-25-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds myself as maintainer for the hikey U-Boot port. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | ARM: hisilicon: hikey: Add hikey & hi6220 dts from v4.6-rc3.Peter Griffin2016-04-25-0/+427
| | | | | | | | | | | | | | | | | | | | | | | | | | | Import the upstream kernel dts into U-Boot. Currently only serial is supported, but a lot more DT changes are queued for v4.7. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | sf: fix timebase data type in _wait_ready()Stephen Warren2016-04-25-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_timer() returns an unsigned 64-bit value, but is currently assigned to a signed 32-bit variable. Due to sign extension and data truncation, this causes the timeout loop in spi_flash_cmd_wait_ready() to immediately (and incorrectly) fire for about 50% of all time values, based on whether bit 31 is set. In sandbox at least, this causes the test to pass or fail based on system uptime, as opposed to time since the U-Boot binary was started. Fixes: 4efad20a1751 ("sf: Update status reg check in spi_flash_cmd_wait_ready") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* | | ti_armv7_common.h: Fix U-Boot location on eMMCSemen Protsenko2016-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to common eMMC partition table for Android boot (see PARTS_DEFAULT definition in include/configs/dra7xx_evm.h), "bootloader" partition (where u-boot.img is stored) starts at 256 KiB. Which is equal to 512 sectors (as 1 MMC sector size is 512 bytes). This patch fixes CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR constant so that it points to correct address of "bootloader" partition and SPL is able to read, parse and run u-boot.img correctly. This change was originally done as part of patch [1] in omapzoom u-boot. Without this patch, SPL fails to parse U-Boot header with next error: mkimage signature not found - ih_magic = 4814325a While at it, also fix U-Boot partition size, which is 384 KiB (as stated in include/configs/dra7xx_evm.h). [1] http://omapzoom.org/?p=repo/u-boot.git;a=commit;h=742b82d0c0aa0ed8096c2225a00e9f350212efa9 Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | configs: Re-sync with cmd/KconfigTom Rini2016-04-25-1300/+5125
| | | | | | | | | | | | | | | | | | | | | Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
* | | cmd: Kconfig: Add a Kconfig options for a few CMDDinh Nguyen2016-04-25-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the following CMD options to Kconfig: CMD_BOOTZ CMD_ASKENV CMD_GREPENV CMD_USB_MASS_STORAGE CMD_FAT CMD_MII CMD_CACHE CMD_DFU CMD_EXT2 CMD_EXT4 CMD_EXT4_WRITE CMD_FS_GENERIC CMD_MMC Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [trini: Don't make CMD_USB_MASS_STORAGE nor CMD_DFU depend on CMD_USB] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | include/configs: Whitespace fixupTom Rini2016-04-25-675/+0
| | | | | | | | | | | | | | | | | | | | | A number of moveconfig.py runs have left a instances of multiple empty lines in a row. Correct this to a single empty line. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | configs: Re-sync almost all of cmd/KconfigTom Rini2016-04-25-1509/+4344
| | | | | | | | | | | | | | | | | | | | | | | | This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | configs: Re-sync CONFIG_USB_MUSB_HOSTTom Rini2016-04-25-12/+23
| | | | | | | | | | | | | | | | | | | | | Now that CONFIG_USB_MUSB_HOST is part of Kconfig, migrate that over to the defconfig files. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | configs: Re-sync HUSH optionsTom Rini2016-04-25-441/+909
| | | | | | | | | | | | | | | | | | | | | Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-uniphierTom Rini2016-04-25-174/+1151
|\ \ \
| * | | ARM: uniphier: speed up loading kernel image from NOR deviceMasahiro Yamada2016-04-24-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Copy the kernel image double-word-wise rather than byte-wise. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | clk: uniphier: add Media I/O clock driver support for PH1-LD20Masahiro Yamada2016-04-24-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | PH1-LD20 needs this for its SD card controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: dts: uniphier: add SD controller node for PH1-LD20Masahiro Yamada2016-04-24-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PH1-LD20 does not support 1.8V signaling for SD card; only Default Speed and High Speed (up to 50MHz) with 3.3V signaling is supported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: reserve the last 64 byte of SDRAMMasahiro Yamada2016-04-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The last 64 byte of each DDR channel of PH1-LD20 is periodically used as a scratch area for the DDR PHY training. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: add PH1-LD20 SoC supportMasahiro Yamada2016-04-24-10/+956
| | | | | | | | | | | | | | | | | | | | | | | | This is the first ARMv8 SoC from Socionext Inc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: rework uniphier_set_fdt_file()Masahiro Yamada2016-04-24-31/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current table look-up for the DTB file name turned out bothersome in terms of maintainability; I ended up adding a new entry every time a new board is supported. There is a common pattern between the DT compatible string and the corresponding file name; drop the vendor prefix "socionext," and prefix it with "uniphier-" and suffix it with ".dtb". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: carry on booting for Unknown boot modeMasahiro Yamada2016-04-24-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need to stop booting U-Boot even if boot mode is unknown. Setting the "bootmode" environment is only useful for booting Linux Kernel. Anyway, U-Boot has already booted by this point. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: add sg_set_iectrl_range()Masahiro Yamada2016-04-24-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For PH1-LD20 or later, per-pin input-enable control is supported, that is, we need to set-up IECTRL registers for a group of pins. This helper function will be useful for a bunch of register settings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: dts: uniphier: move aliases node up to satisfy fdtgrepMasahiro Yamada2016-04-24-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, fdtgrep would not accept uniphier-ph1-ld20-ref.dtb and uniphier-ph1-ld11-ref.dtb unless the aliases node comes the first in the root node. $ make -s uniphier_pxs2_ld6b_defconfig $ make CROSS_COMPILE=arm-linux-gnueabi- DEVICE_TREE=uniphier-ph1-ld20-ref [snip] LDS spl/u-boot-spl.lds LD spl/u-boot-spl OBJCOPY spl/u-boot-spl-nodtb.bin FDTGREP spl/u-boot-spl.dtb Error at 'fdt_find_regions': FDT_ERR_BADLAYOUT /aliases node must come before all other nodes Error: FDT_ERR_BADMAGIC make[1]: *** [spl/u-boot-spl.dtb] Error 1 make: *** [spl/u-boot-spl] Error 2 This commit moves the aliases node as the error message from the fdtgrep tool suggests, although this requirement does not sound reasonable to me. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: dts: uniphier: use Ref Daughter board on PH1-LD20 Ref boardMasahiro Yamada2016-04-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes the EEPROM device on the Reference Daughter board available. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: uniphier: avoid unaligned access to DT on 64bit SoCMasahiro Yamada2016-04-24-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Because DT properties are 4-byte aligned, the pointer access *(fdt64_t *) in this code causes unaligned access. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | pinctrl: uniphier: fix NAND and SD pin-mux settings for PH1-LD11/LD20Masahiro Yamada2016-04-24-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I found many mistakes in the initial version. Fixes: 8a3328c209d0 ("pinctrl: uniphier: support UniPhier PH1-LD20 pinctrl driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | pinctrl: uniphier: rename function/array namesMasahiro Yamada2016-04-24-102/+102
| |/ / | | | | | | | | | | | | | | | Make function/array names match the file names for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-usbTom Rini2016-04-25-56/+119
|\ \ \
| * | | dfu: ram: fix number base of RAM entity parametersStephen Warren2016-04-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot typically interprets unprefixed numbers as base 16, and DFU RAM entity parsing has historically done so. Reverse the change to default to base 10, so that values in previously working command-lines aren't mis-parsed, causing RAM corruption, crashes, hangs, etc. Fixes: 6aeb877afef0 ("drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env") Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Mugunthan V N <mugunthanvnm@ti.com> [Test HW: AM335x BBB]
generated by cgit v1.1 at 2024-11-06 05:58:01 +0000