summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ARM64: zynqmp: Enable TI phy by defaultMichal Simek2015-11-19-0/+1
| | | | | | Enable TI phy for Xilinx ZynqMP platform. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: phy: Add support for Texas Instruments DP83867Edgar E. Iglesias2015-11-19-0/+205
| | | | | | | | | Code is taken from Linux kernel driver (v4.2). Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* ARM: zynq: Choose boot image based on OF_SEPARATE macroMichal Simek2015-11-19-1/+1
| | | | | | | | | OF_CONTROL is enabled by default for all Zynq boards. The difference between two boot images is done by OF_SEPARATE or OF_EMBED macros. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* zynqmp: mp: Add support for booting R5 from any addressMichal Simek2015-11-19-3/+35
| | | | | | | Put jump trampoline to TCM at 0 and setup R5 reset address to 0. Jump trampoline ensures that jump to the right location. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* itest: add missing break statements to evalexp()Stephen Warren2015-11-18-3/+9
| | | | | | | | | | The commit mentioned below replaced return statements inside a switch so that other code could be called after the switch. However, it didn't add any break statements, causing the cases to run together. Fix this. Reported-by: Coverity (CID 132282, 132283) Fixes: 7861204c9af7 ("itest: make memory access work under sandbox") Signed-off-by: Stephen Warren <swarren@nvidia.com>
* test: fat: add error-checking to non-contig testStephen Warren2015-11-18-0/+32
| | | | | | | | | | | | | | | Check the result code of all command that are executed. Without this, if the fallocate invocation fails (this feature is not supported on ext3 filesystems for example) then a zero-length output file will be created, and subsequent the mkfs and mount invocations will fail, which will cause the subsequent dd invocation to attempt to fill up the host's entire free disk space. That's not a nice user experience! Related, if fallocate does fail, try to create the test disk image using dd instead. That should work everywhere. Fixes: 4a28274227d0 ("test: fat: add test of non-contiguous file reads") Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Fix sandbox build on Ubuntu 10.04Stephen Warren2015-11-18-1/+3
| | | | | | | | | | | | | | gcc 4.4.3 (which is the default native compiler on x86-64 Ubuntu 10.04) doesn't seem to like initializers for sub-fields of anonymous unions. Solve this by replacing the initialization with an assignment. This fixes: lib/lz4_wrapper.c: In function ‘ulz4fn’: lib/lz4_wrapper.c:97: error: unknown field ‘raw’ specified in initializer Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Simon Glass <sjg@chromium.org>
* km/powerpc: fix ft_board_setup prototype for km82xx & km83xxValentin Longchamp2015-11-18-2/+2
| | | | Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* powerpc/83xx: add support for kmtegr1 boardValentin Longchamp2015-11-18-4/+66
| | | | | | | | | This board uses the same CPU (8309) as VECT1. The memory however is different since it has NAND Flash, the NOR Flash partitioning is different and of course the FPGAs as well. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Christoph Dietrich <christoph.dietrich@keymile.com>
* km8309: change the default QE_FW addressValentin Longchamp2015-11-18-2/+4
| | | | | | | | | | | It should be after the u-boot reserved sectors and before the env sectors, since the solution used for kmvect1 (tell the linker to put the firmware into the u-boot produced binary, at the end of the area) should be the exception. The #define is only "conditional" so that we can still support kmvect1. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* km83xx: use CONFIG_ENV_ADDR for the newenv env commandValentin Longchamp2015-11-18-2/+6
| | | | | | | | | | The hardcoded value are bad, since the address could change between different boards. Furthermore, the relevant #defines are set only if #undefined here, so that they can be changed by some boards if required. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloaderBagavathiannan Palanisamy2015-11-18-2/+2
| | | | | | | | | | Setting dip_switch 3 and 4 also will run bootloader in COGE3 and COGE6 It is required remove local mgmt IP address, when DIP Switch PIN3 is enabled. DIP Switch 4 also enabled to avoid u-boot update in future for DIP switch enhancements. Signed-off-by: Bagavathiannan Palanisamy <Bagavathiannan.Palanisamy@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* powerpc/km8360: fix the ODT parameters for CS0Valentin Longchamp2015-11-18-2/+2
| | | | | | | | | | | | | The ODT parameters for km8360 set the ODT_WR_ACS bit in u-boot KM-2011.09 that is used in the release bootpackage for kmcoge5ne. During the transition from the kmeter1 to km8360 this was changed to ODT_RD_ONLY_CURRENT, which is uncorrect and causes faulty RAM accesses at low temperatures. This is now changed to ODT_WR_ONLY_CURRENT which is the equivalent of ODT_WR_ACS. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* powerpc/km8309: define CONFIG_SYS_DDRCDRValentin Longchamp2015-11-18-0/+6
| | | | | | | For consistency with all the other km83xx plaforms, this should also be defined for km8309. The same settings as for km8321 are taken. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* powerpc/km8321: define CONFIG_SYS_DDRCDRValentin Longchamp2015-11-18-0/+6
| | | | | | | | | | | | | | | | | | | | | | On the km8321 boards is CONFIG_SYS_DDRCDR not defined, which leads to the DDRCDR not being configured at startup and still containing the reset value. The required settings for our km8321 hardware designs are different than the reset value and must be set with CONFIG_SYS_DDRCDR, that is used by mpc83xx's cpu_init_f function at early CPU initialization. The important settings are the DDR2 internal voltage level and the half-strength "drivers". In our case where the DRAM chips are soldered on board and the routing for these signals under control, half-strength is sufficient as a few measurements done in the lasts have shown. Since all the hardware qualification tests have been performed with half strength, the nominal strength settings are removed in favor of the default reset half strength settings. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* km/powerpc82xx: remove unused functionHolger Brunck2015-11-18-16/+0
| | | | | | | | commit 0a4f88b98 removed the usage of our setports function, but the function itself were not removed. So toss it it's dead code. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* km/powerpc: remove unneeded definesHolger Brunck2015-11-18-9/+3
| | | | | | | | We use CONFIG_OF_LIBFDT and CONFIG_OF_BOARD_SETUP on all our powerpc targets, so there is no need to check these defines within our C code. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* km/powerpc: move open firmware defines to km-powerpc.hHolger Brunck2015-11-18-6/+4
| | | | | | | | | We use the same settings for open firmware defines on all our powerpc targets, so move them from the CPU specific headers to the common powerpc header. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* km/powerpc: increase space for kernel imange and FDT blobHolger Brunck2015-11-18-3/+3
| | | | | | | | | 128kByte and 3,986MB may be in the future too little for kernel the fdt blob respectively the kernel image. So increase the reserved areas here, we have the space for this. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* powerpc/82xx/km: add testpin detection for mgcoge3neHolger Brunck2015-11-18-1/+15
| | | | | | | | | On mgcoge3ne we also want to start the test application if the testpin is asserted. But we don't have a full POST test support yet. So simply add a function to read the testpin value. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* powerpc/82xx: make set/get_pin for km82xx more flexibleHolger Brunck2015-11-18-12/+12
| | | | | | | | | The get_pin and set_pin funciton was only used for pins on Port D and therefore the value was hard coded in the function. Enhance this with a parameter, that we are able to use this functions for other ports too. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* powerpc/83xx: add support for kmtepr2 boardChristoph Dietrich2015-11-18-7/+41
| | | | | | | | This board is similar to TUXX1, but it has differend FPGAs. Signed-off-by: Christoph Dietrich <christoph.dietrich@keymile.com> Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* km/scripts: search for kernel/DTBs at serverip:/PRODUCTNAME via TFTP in ↵Tobias Müller2015-11-18-3/+3
| | | | | | | | | | | develop mode Search for the kernel and DTBs in a folder named PRODUCTNAME (found in the IVM) at the TFTP server instead of the u-boot boardname. Signed-off-by: Tobias Müller <Tobias.Mueller@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* km/scripts: load fdt_bid_kwkey.dtb when working with tftpHolger Brunck2015-11-18-1/+1
| | | | | | | | | | | | When loading the dtb file via tftp we should load the one which matches boardId and hwKey and not a common one for the boardname. We have boards were different hwKeys are used and then we may load an incorrect dtb file. If no fdt_bid_kwkey.dtb file is not a fallback to boardname.dtb is used. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Tobias Müller <Tobias.Mueller@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* km: update the boot script to check for a DTBValentin Longchamp2015-11-18-2/+11
| | | | | | | | | | | | | | If a DTB is found with cramfsls, the bootscript continues as expected. If none is found, the cramfsloadfdt and boot subbootcmds are updated to not load the DTB from cramfs and not pass it to the kernel. The kernel thus must have an appended DTB otherwise the boot will fail. This is required for the km_kirkwood boards that must support .esw where the DTB sometimes is appended (for backwards compatibility) and sometimes is passed correctly (as we do now for all newer boards). Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* km/common: stop u-boot only if someone press <SPACE>Holger Brunck2015-11-18-0/+4
| | | | | | | | | | To prevent u-boot to stop accidently e.g. due to line noise on the serial line, we now use the option CONFIG_AUTOBOOT_KEYED. We choose the <SPACE> key for this. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* arm/km_kirkwood: fix the #ifdef for KM_COGE5UN dip switchValentin Longchamp2015-11-18-1/+1
| | | | | | | There was a small typo for KM_COGE5UN that resulted in the dip switch not to behave as expected. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* arm/mgcoge3un: check dip_switch at startupHolger Brunck2015-11-18-4/+7
| | | | | | | | | | | | Similar to kmcoge5un we need to check the dip switch at startup connected to the kirkwood at MPP43. If it's set we need to set the actual_bank to zero to boot from SW bank zero. Additional to kmcoge5un we need to check also the pin in misc_init to decide wether we wait for the ne to start or not. If the dip_switch is set we don't wait and continue immediately. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* arm/km: Fix LED configuration for 88E1118R PHY (PIGGY3)Tobias Müller2015-11-18-0/+55
| | | | | | | | | | Configure PHY LED register for Marvell 88E1118R PHY used on PIGGY3 to match with printed descriptions on PCB Signed-off-by: Tobias Müller <Tobias.Mueller@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> [trini: Fix typo, CRTL_PAGE -> CTRL_PAGE] Signed-off-by: Tom Rini <trini@konsulko.com>
* arm/km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUSValentin Longchamp2015-11-18-5/+1
| | | | | | | | | KM_ENV_BUS was used for nothing else than an direct assignment to CONFIG_I2C_ENV_EEPROM_BUS. To avoid this, directly use CONFIG_I2C_ENV_EEPROM_BUS instead. Patchwork: http://patchwork.ozlabs.org/patch/399411/ Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* board/ti/am335x: add support for BeagleBone Greenrobertcnelson@gmail.com2015-11-18-4/+15
| | | | | | | | | | | | | | | | | | | | | SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus the HDMI port and addition of two Grove connectors (i2c2 and usart2). This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] http://beagleboard.org/green http://www.seeedstudio.com/wiki/Beaglebone_green In Mainline Kernel as of: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=79a4e64c679d8a0b1037da174e4aea578c80c4e6 Patch tested on BeagleBone Black (rev C) and BeagleBone Green (production model) Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tom Rini <trini@konsulko.com> CC: Jason Kridner <jkridner@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* common: add CMD_GPIO to KconfigThomas Chou2015-11-18-166/+388
| | | | | | | Add CMD_GPIO to Kconfig and run tools/moveconfig.py . Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
* git-mailrc: Add Bin as a maintainer of x86Bin Meng2015-11-18-1/+2
| | | | | | | This updates git-mailrc to add me as a maintainer of x86. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* omap3: cm-t3517: add board specific get_board_rev()Dmitry Lifshitz2015-11-18-0/+9
| | | | | | | | CM-T3517 has several HW revisions. Add board specific get_board_rev() callback to retrieve revision number. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Reviewed-by: Igor Grinberg <grinberg@compulab.co.il>
* spl: mmc: add support for BOOT_DEVICE_MMC2Nikita Kiryanov2015-11-18-19/+36
| | | | | | | | | | | Currently the mmc device that SPL looks at is always mmc0, regardless of the BOOT_DEVICE_MMCx value. This forces some boards to implement hacks in order to boot from other mmc devices. Make SPL take into account the correct mmc device. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: mx6: cm-fx6: define fallback boot devices for splNikita Kiryanov2015-11-18-10/+10
| | | | | | | | | | | | Use spl alternate boot device feature to define fallback to the main boot device as it is defined by hardware. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* spl: announce boot devicesNikita Kiryanov2015-11-18-0/+79
| | | | | | | | | | | | | Now that we support alternative boot devices, it can sometimes be unclear which boot devices was actually used. Provide a function to announce which boot devices are attempted during boot. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* spl: add support for alternative boot deviceNikita Kiryanov2015-11-18-4/+29
| | | | | | | | | | | | | | Introduce spl_boot_list array, which defines a list of boot devices that SPL will try before hanging. By default this list will consist of only spl_boot_device(), but board_boot_order() can be overridden by board code to populate the array with custom values. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* common: spl: move image load to its own functionNikita Kiryanov2015-11-18-67/+50
| | | | | | | | | | | | | Refactor spl image load code out of board_init_r and into its own function. This is a preparation for supporting alternative boot devices. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: change return values of spl_*_load_image()Nikita Kiryanov2015-11-18-65/+123
| | | | | | | | | | | | | | | | | | | | | | | Make spl_*_load_image() functions return a value instead of hanging if a problem is encountered. This enables main spl code to make the decision whether to hang or not, thus preparing it to support alternative boot devices. Some boot devices (namely nand and spi) do not hang on error. Instead, they return normally and SPL proceeds to boot the contents of the load address. This is considered a bug and is rectified by hanging on error for these devices as well. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Jagan Teki <jteki@openedev.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* spl: mmc: get rid of emmc boot code duplicationNikita Kiryanov2015-11-18-36/+18
| | | | | | | | | | | | | | | | | Get rid of emmc boot code duplication in spl_mmc_load_image() using a switch case fallthrough into MMCSD_MODE_RAW. Since the #ifdef CONFIG_SUPPORT_EMMC_BOOT check is not really necessary, remove it in the process. No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: mmc: move fs boot into its own functionNikita Kiryanov2015-11-18-30/+51
| | | | | | | | | | | | | | | | Move the code that handles fs boot out of spl_mmc_load_image() and into its own function to reduce the #ifdef complexity of spl_mmc_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: mmc: get rid of #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION checkNikita Kiryanov2015-11-18-4/+9
| | | | | | | | | | | | | | | | | | Implement defaults for the raw partition image loading so that the #ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION in spl_mmc_load_image() will no longer be necessary. This change makes it possible for mmc_load_image_raw_partition() and mmc_load_image_raw_sector() to coexist. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: mmc: remove #ifdef CONFIG_SPL_OS_BOOT checkNikita Kiryanov2015-11-18-8/+21
| | | | | | | | | | | | | | | | | | | Implement default versions of falcon mode functions to make the CONFIG_SPL_OS_BOOT check in spl_mmc_load_image() unnecessary, thus reducing its #ifdef complexity. No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Suriyan Ramasami <suriyan.r@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: mmc: refactor device location code to its own functionNikita Kiryanov2015-11-18-22/+55
| | | | | | | | | | | | | | | | | | | Simplify spl_mmc_load_image() code by moving the part that finds the mmc device into its own function spl_mmc_find_device(), available in two flavors: DM and non-DM. This refactor fixes a bug in which an error in the device location sequence does not necessarily aborts the rest of the code. With this refactor, we fail the moment there is an error. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: mmc: add break statements in spl_mmc_load_image()Nikita Kiryanov2015-11-18-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original intention of the mmc load_image() function was to try multiple boot modes before failing. This is evident by the lack of break statements in the switch, and the following line in the default case: puts("spl: mmc: no boot mode left to try\n"); This implementation is problematic because: - The availability of alternative boot modes is very arbitrary since it depends on the specific order of the switch cases. If your boot mode happens to be the first case, then you'll have a bunch of other boot modes as alternatives. If it happens to be the last case, then you have none. - Opting in/out is tied to config options, so the only way for you to prevent an alternative boot mode from being attempted is to give up on the feature completely. - This implementation makes the code more complicated and difficult to understand. Address these issues by inserting a break statements between the cases to make the function try only one boot mode. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: nand: remove code duplicationNikita Kiryanov2015-11-18-15/+16
| | | | | | | | | | | | | | | Remove code duplication in spl_nand_load_image(). No functional changes. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Scott Wood <scottwood@freescale.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Scott Wood <scottwood@freescale.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> [trini: Add back cast to unsigned long of spl_image.load_addr] Signed-off-by: Tom Rini <trini@konsulko.com>
* Allow fw env tools to be available as libraryStefano Babic2015-11-18-1/+3
| | | | | | | | | | | Sometimes it can be useful to link the fw_ tools instead of having the fw_setenv/fw_printenv installed. Patch exports the tool as library and allowes to link it with own programs. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: ti: beagle_x15: Rename to indicate support for TI am57xx evmsKipisz, Steven2015-11-18-12/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BeagleBoard X15 (http://beagleboard.org/x15) support in u-boot does actually support two different platform configuration offered by TI. In addition to BeagleBoard X15, it also supports the TMDXEVM5728 (or more commonly known as AM5728-evm). Information about the TI AM57xx EVM can be found here http://www.ti.com/tool/tmdxevm5728 The EVM configuration is 1-1 compatible with BeagleBoard X15 with the additional support for mPCIe, mSATA, LCD, touchscreen, Camera, push button and TI's wlink8 offering. Hence, we rename the beagle_x15 directory to am57xx to support TI EVMs that use the AM57xx processor. By doing this we have common code reuse. This sets the stage to have a common u-boot image solution for multiple TI EVMs such as that already done for am335x and am437x. This sets the stage for upcoming multiple TI EVMs that share the same code base. NOTE: Commit eae7ae185335 ("am437x: Add am57xx_evm_defconfig using CONFIG_DM") introduced DT support for beagle_x15 under am57xx_evm platform name. However, this ignored the potential confusion arising for users as a result. To prevent this, existing beagle_x15_defconfig is renamed as am57xx_evm_nodt_defconfig to denote that this is the "non device tree" configuration for the same platform. We still retain am57xx-beagle-x15.dts at this point, since we just require the common minimum dts. As a result of this change, users should expect changes in build procedures('make am57xx_evm_nodt_defconfig' instead of 'make beagle_x15_defconfig'). Hopefully, this would be a one-time change. Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Schuyler Patton <spatton@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
* tools/env: allow config filename to be passed via command line argumentMichael Heimpold2015-11-18-3/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When for example generating/manipulating SD card/eMMC images which contain U-Boot and its environment(s), it is handy to use a given configuration file instead of the compiled-in default one. And since the default configuration file is expected under /etc it's hard for an usual linux user account without special permissions to use fw_printenv/fw_setenv for this purpose. So allow to pass an optional filename via a new '-c' command line argument. Example: $ ln -s fw_printenv tools/env/fw_setenv $ cat fw_env.config test.img 0x20000 0x20000 test.img 0x40000 0x20000 $ tools/env/fw_printenv -c ./fw_env.config fdt_file fdt_file=imx28-duckbill.dtb $ tools/env/fw_setenv -c ./fw_env.config fdt_file imx28-duckbill-spi.dtb $ tools/env/fw_printenv -c ./fw_env.config fdt_file fdt_file=imx28-duckbill-spi.dtb Signed-off-by: Michael Heimpold <mhei@heimpold.de>
generated by cgit v1.1 at 2024-12-21 14:35:52 +0000