summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* SPL: tiny-printf: add "l" modifierAndre Przywara2017-01-04-11/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | tiny-printf does not know about the "l" modifier so far, which breaks the crash dump on AArch64, because it uses %lx to print the registers. Add an easy way of handling longs correctly. Using a relatively decent compiler (GCC 5.3.0) this does _not_ increase the code size of tiny-printf.o for 32-bit builds (where long and int are actually the same), actually it looses three (ARM Thumb2) instructions from the actual SPL (numbers for orangepi_plus_defconfig): text data bss dec hex filename 758 0 0 758 2f6 spl/lib/tiny-printf.o before 18839 488 232 19559 4c67 spl/u-boot-spl before 758 0 0 758 2f6 spl/lib/tiny-printf.o after 18833 488 232 19553 4c61 spl/u-boot-spl after This adds some substantial amount of code to a 64-bit build, though: (taken after a later commit, which enables the ARM64 SPL build for sunxi) text data bss dec hex filename 1542 0 0 1542 606 spl/lib/tiny-printf.o before 25830 392 360 26582 67d6 spl/u-boot-spl before 1758 0 0 1758 6de spl/lib/tiny-printf.o after 26040 392 360 26792 68a8 spl/u-boot-spl after Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
* armv8: add lowlevel_init.SAndre Przywara2017-01-04-0/+45
| | | | | | | | | | | | For boards that call s_init() when the SPL runs, we are expected to setup an early stack before calling this C function. Implement the proper AArch64 version of this based on the ARMv7 code. This allows sunxi boards to setup the basic peripherals even with a 64-bit SPL. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
* armv8: prevent using THUMBAndre Przywara2017-01-04-1/+3
| | | | | | | | | | | | | | | | The predominantely 32-bit ARM targets try to compile the SPL in Thumb mode to reduce code size. The 64-bit AArch64 instruction set does not know an alternative, concise encoding, so the Thumb build option should only be set for 32-bit targets. Likewise -marm machine options are only valid for ARMv7 targets. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* sun6i: Restrict some register initialization to Allwinner A31 SoCAndre Przywara2017-01-04-1/+5
| | | | | | | | | | | | | | | | | | | These days many Allwinner SoCs use clock_sun6i.c, although out of them only the (original sun6i) A31 has a second MBUS clock register. Also the requirement for setting up the PRCM PLL_CTLR1 register to provide the proper voltage seems to be a property of older SoCs only as well. Restrict the MBUS initialization to this SoC only to avoid writing bogus values to (undefined) registers in other chips. I can only verify that the PLL voltage setup is not needed for H3 and A64, so for now we only spare those two SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* spl: sunxi: Fix build error with CONFIG_SPL_SPI_SUNXIPriit Laes2017-01-04-1/+1
| | | | | | | Fix typo introduced in ebc4ef61d76fc182773fe225151adc9b913c62eb Signed-off-by: Priit Laes <plaes@plaes.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
* Prepare v2017.01-rc3Tom Rini2017-01-02-1/+1
| | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-01-02-137/+486
|\
| * udoo: neo: Fix indentationFabio Estevam2017-01-02-2/+2
| | | | | | | | | | | | The standard way is to put ifdef/endif in the very first column. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * imx6ul: geam6ul: Enable I2C supportJagan Teki2017-01-02-0/+2
| | | | | | | | | | | | | | | | | | Enable I2C support for Engicam GEAM6UL NAND module. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx6ul: geam6ul: Add MAINTAINERS for nand_defconfigJagan Teki2017-01-02-0/+1
| | | | | | | | | | | | | | | | | | Add Jagan as MAINTAINERS of configs/imx6ul_geam_nand_defconfig Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * configs: engicam: Add fitboot env supportJagan Teki2017-01-02-6/+33
| | | | | | | | | | | | | | | | | | | | | | Add FIT image booting from MMC device, during MMC bootcmd u-boot env script look for bootscript, else fit image or else finally look for legacy image uImage. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * configs: engicam: Cleanup on mmcboot envJagan Teki2017-01-02-21/+20
| | | | | | | | | | | | | | | | | | | | - Add tab space - remove exctra 'mmc dev ${mmcdev}' Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * configs: engicam: Enable CONFIG_IMAGE_FORMAT_LEGACYJagan Teki2017-01-02-0/+3
| | | | | | | | | | | | | | | | | | | | | | Enabling FIT along with Signature will make bootm to not-understanding u-boot legacy image formats like uImage, etc. So this patch enabling legacy image format for backward compatibility. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * defconfigs: imx6: engicam: Enable FITJagan Teki2017-01-02-0/+45
| | | | | | | | | | | | | | | | | | Enable Flattened Image Tree support for all Engicam boards. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx6: engicam: Add nandboot env supportJagan Teki2017-01-02-4/+38
| | | | | | | | | | | | | | | | | | Add config options for booting Linux from NAND in UBI format. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * defconfigs: engicam: Enable UBI commandsJagan Teki2017-01-02-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create ubifs.img: $ mkfs.ubifs -q -r /rootfs -m 4096 -e 253952 -c 7936 -o ubifs.img Write ubifs.img: --------------- icorem6qdl> nand erase.part rootfs icorem6qdl> ubi part rootfs icorem6qdl> ubi create rootfs icorem6qdl> ext4load mmc 0:2 ${loadaddr} ubifs.img 166592512 bytes read in 8091 ms (19.6 MiB/s) icorem6qdl> ubi write ${loadaddr} rootfs ${filesize} 166592512 bytes written to volume rootfs icorem6qdl> ubifsmount ubi0:rootfs Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * defconfigs: engicam: Enable MMC commands in nandJagan Teki2017-01-02-0/+15
| | | | | | | | | | | | | | | | | | | | | | For writing Linux or rootfs on to NAND, the best suitable way is to use MMC commands since MMC driver by default enabled by mx6_common.h, hence enabled MMC commands in nand defconfigs. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * configs: engicam: Rename nand with gpmi-name in mtdpartsJagan Teki2017-01-02-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | gpmi-nand is the proper name used in nand driver from Linux for all imx related nand boards, so rename mtdparts name as gpmi-nand instead of nand, this will eventually reflects all nand info to Linux from u-boot like mtdparts. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx6: engicam: Use bootm instead of bootzJagan Teki2017-01-02-20/+12
| | | | | | | | | | | | | | | | | | | | Boot Linux with uImage instead of zImage, so update bootz with bootm. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * configs: engicam: Increase nand kernel partition sizeJagan Teki2017-01-02-2/+2
| | | | | | | | | | | | | | | | | | | | Increase the nand kernel partition size, for supporting large uImage files, maximum 8MiB. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * mx6qsabreauto: Fix the EIM clock for the mx6qp variantFabio Estevam2017-01-02-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the MX6Q the aclk_eim_slow_podf field is '1' after POR, while on the MX6DQP it is '3'. This makes the EIM clock to be only 66MHz on the mx6qp variant, instead of 132 MHz. Instead of relying on the POR values for the CSMR1 register, make sure to manually configure the clk_eim_slow_sel field as '00' so that EIM clock is derived from AXI clock and the aclk_eim_slow_podf field as '1' so that EIM clock can be AXI clock divided by 2. This way a consistent EIM clock frequency is configured for all the mx6 variants. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
| * ARM: imx7s-warp: enable USB gadget ethernetKevin Hilman2017-01-02-0/+26
| | | | | | | | | | | | | | | | | | Enable USB gadget ethernet by default to have networking capabilities. Tested using DHCP and TFTP to transfer kernel, DT, ramdisk. Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
| * udoo_neo: Use 'fdtfile' variable nameFabio Estevam2017-01-02-6/+6
| | | | | | | | | | | | | | | | | | | | 'fdtfile' is the preferred name for the variable that contains the device tree blob according to the README file. It also makes it consistent with other i.MX boards that use config_distro, so change it accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * imx: thermal: Kconfig: add MX7Peng Fan2017-01-02-1/+1
| | | | | | | | | | | | | | The thermal drivers support i.MX6 and i.MX7, add MX7 in Kconfig file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * Makefile: preserve output for images that can contain HAB BlocksSven Ebenfeld2017-01-02-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To being able to sign created binaries, we need to know the HAB Blocks for that image. Especially for the imximage type the HAB Blocks are only available during creation of the image. We want to preserve the information until we get to sign the files. In the verbose case we still get them printed out instead of writing to log files. Cc: sbabic@denx.de v2-Changes: - No usage of MKIMAGEOUTPUT_$(@F) macro. - Predefine default value /dev/null in every involved Makefile. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
| * doc: imx6: add section for secure boot with SPLSven Ebenfeld2017-01-02-0/+48
| | | | | | | | | | | | | | Cc: sbabic@denx.de Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com>
| * tools: mkimage: add firmware-ivt image type for HAB verificationSven Ebenfeld2017-01-02-3/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we want to use Secure Boot with HAB from SPL over U-Boot.img, we need to append the IVT to the image and leave space for the CSF. Images generated as firmware_ivt can directly be signed using the Freescale code signing tool. For creation of a CSF, mkimage outputs the correct HAB Blocks for the image. The changes to the usual firmware image class are quite small, that is why I implemented that directly into the default_image. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
| * arm: imx: add HAB authentication of image to SPL bootSven Ebenfeld2017-01-02-59/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using HAB as secure boot mechanism on Wandboard, the chain of trust breaks immediately after the SPL. As this is not checking the authenticity of the loaded image before jumping to it. The HAB status output will not be implemented in SPL as it adds a lot of strings that are only required in debug cases. With those it exceeds the maximum size of the available OCRAM (69 KiB). The SPL MISC driver support must be enabled, so that the driver can use OTP fuse to check if HAB is enabled. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
| * arm: imx: remove bmode , hdmidet and dek commands from SPLSven Ebenfeld2017-01-02-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These files are blowing up the SPL and should not be required there as the SPL delivers no command console. Because building fails for mx27 and mx31 machines with SPL build, we remove the linker flag for them from the Makefile. Nothing is built for them to be linked in that directory. Cc: sbabic@denx.de v2 Changes: - Remove mx27 and mx31 from Makefile during SPL build as nothing is built for them in that directory. And removing the commands with the libs-y directive lead to linker failures. e.g. "armv5te-ld.bfd: cannot find arch/arm/imx-common/built-in.o: No such file or directory)" Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
| * udoo_neo: Remove USDHC3 entryFabio Estevam2017-01-02-2/+1
| | | | | | | | | | | | | | | | Commit c94981efa20cc58 ("udoo_neo: Remove USDHC3 support") removed the SDHC3 support, but missed to remove the entry from the usdhc_cfg structure, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | arm: am57xx: cl-som-am57x: update default envUri Mashiach2017-01-02-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify U-Boot default env settings. Boot sequence: 1. SD card boot script 2. SD card boot no script 3. SATA boot script 4. SATA boot no script 5. eMMC boot script 6. eMMC boot no script Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am57xx: cl-som-am57x: add ETH supportDmitry Lifshitz2017-01-02-0/+240
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MAC support. Use PHY, connected to RGMII1 as a default Eth adapter, by appropriate setting of 'cpsw_data.active_slave'. 'cpsw_phy' env variable can override this setting. Set the MAC addresses in the U-Boot environment. The addresses are retrieved from the on-board EEPROM or from the SOC's MAC fuses. Set the following PHYs RGMII clock delays: - Enable RX delay - Disable TX delay Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> [uri.mashiach@compulab.co.il: add RGMII clock delays] Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am57xx: cl-som-am57x: fetch board rev from EEPROMDmitry Lifshitz2017-01-02-0/+28
| | | | | | | | | | | | | | | | | | | | | | Add PCB revision message. Implement board revision get_board_rev API. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Commit description update. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: am57xx: cl-som-am57x: add initial board supportDmitry Lifshitz2017-01-02-0/+579
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Features supported : * Serial console * SPI Flash * MMC/SD Card * eMMC storage * SATA * PCA9555 - GPIO expander over I2C5 bus * USB Use spl alternate boot device feature to define fallback to the main boot device as it is defined by hardware. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> [uri.mashiach@compulab.co.il: Adjust to v2016.11] Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | tools: binman: Use /usr/bin/env to find python executableEmmanuel Vadot2017-01-02-1/+1
| | | | | | | | | | | | | | | | | | Some OS (all BSD and probably others) do not have python in /usr/bin but in another directory. It is a common usage to use /usr/bin/env python as shebang for python scripts so use this for binman. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
* | OMAP3: omap3_logic: Remove display parameterAdam Ford2017-01-02-2/+1
| | | | | | | | | | | | | | The display is done in the device tree now, and there is no need to pass 'display' kernel parameter any longer. Signed-off-by: Adam Ford <aford173@gmail.com>
* | ARM: OMAP3_LOGIC: Remove ONENAND config optionsAdam Ford2017-01-02-3/+0
| | | | | | | | | | | | These boards do not and never have had ONENAND support, so let's remove it. Signed-off-by: Adam Ford <aford173@gmail.com>
* | doc/README.cfi: Update code snippet, and add example.Robert P. J. Day2017-01-02-5/+26
| | | | | | | | | | | | | | | | First, update the code snippet referenced in the README file. And since there are only two boards that override flash_cmd_reset(), might as well show them both. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* | digsy_mtc.c: Minor spelling/grammar fixes.Robert P. J. Day2017-01-02-2/+2
|/ | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* mmc: move MMC_SDHCI_IO_ACCESSORS to KconfigMasahiro Yamada2016-12-29-1/+8
| | | | | | | | | | This is a user-unconfigurable option that is selected by the drivers that need to overwrite SDHCI IO memory accessors. (BCM2835 SDHCI seems the only driver that needs to do so.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* mmc: move some SDHCI related options to KconfigMasahiro Yamada2016-12-29-31/+127
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While I moved the options, I also renamed them so that they are all prefixed with MMC_SDHCI_. This commit was created in the following steps. [1] Rename with the following command find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e ' s/CONFIG_MMC_SDMA/CONFIG_MMC_SDHCI_SDMA/g s/CONFIG_BCM2835_SDHCI/CONFIG_MMC_SDHCI_BCM2835/g s/CONFIG_KONA_SDHCI/CONFIG_MMC_SDHCI_KONA/g s/CONFIG_MV_SDHCI/CONFIG_MMC_SDHCI_MV/g s/CONFIG_S5P_SDHCI/CONFIG_MMC_SDHCI_S5P/g s/CONFIG_SPEAR_SDHCI/CONFIG_MMC_SDHCI_SPEAR/g ' [2] create the Kconfig entries in drivers/mmc/Kconfig [3] Move the options by the following command tools/moveconfig.py -y MMC_SDHCI_SDMA MMC_SDHCI_BCM2835 \ MMC_SDHCI_KONA MMC_SDHCI_MV MMC_SDHCI_S5P MMC_SDHCI_SPEAR [4] Sort drivers/mmc/Makefile for readability Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* mmc: move CONFIG_SDHCI to Kconfig, renaming to CONFIG_MMC_SDHCIMasahiro Yamada2016-12-29-21/+72
| | | | | | | | | | | | | | | | | | | | | | | Move CONFIG_SDHCI to Kconfig and rename it to CONFIG_MMC_SDHCI. My motivation for the rename is, ultimately, to make all the MMC options prefixed with MMC_ and SDHCI options with MMC_SDHCI_, like Linux. This commit was created as follows: [1] Rename the config option with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e 's/CONFIG_SDHCI/CONFIG_MMC_SDHCI/g' [2] create the entry for MMC_SDHCI in drivers/mmc/Kconfig [3] run "tools/moveconfig.py -y MMC_SDHCI" [4] add "depends on MMC_SDHCI" to existing SDHCI driver entries Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* mmc: make MMC driver entries dependent on MMCMasahiro Yamada2016-12-29-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, CONFIG_MMC is not related to any other options by "depends on" or "select". One of big advantages of using Kconfig is automatic dependency tracking, but the current state is lacking it. As the first step, make the existing MMC driver entries depend on MMC. This commit was created by the following steps: [1] Run the following script: --------------------8<-------------------- rm -f tmp.txt for d in $(find . -path './configs/*_defconfig') do if grep -q -e 'CONFIG_MSM_SDHCI=y' $d || grep -q -e 'CONFIG_ATMEL_SDHCI=y' $d || grep -q -e 'CONFIG_ROCKCHIP_DWMMC=y' $d || grep -q -e 'CONFIG_SH_SDHI=y' $d || grep -q -e 'CONFIG_PIC32_SDHCI=y' $d || grep -q -e 'CONFIG_ZYNQ_SDHCI=y' $d || grep -q -e 'CONFIG_ROCKCHIP_SDHCI=y' $d || grep -q -e 'CONFIG_MMC_UNIPHIER=y' $d || grep -q -e 'CONFIG_SANDBOX_MMC=y' $d then echo CONFIG_MMC=y >> $d echo ${d#./configs/} >> tmp.txt fi done tools/moveconfig.py -y -s -d tmp.txt rm tmp.txt --------------------8<-------------------- [2] surround MMC driver entries with "if MMC" and "endif" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* mmc: complete unfinished move of CONFIG_MMCMasahiro Yamada2016-12-29-202/+382
| | | | | | | | | | | | | | | | | | | | | | | | Commit 7a777f6d6f35 ("mmc: Add generic Kconfig option") created a Kconfig entry for this option without any actual moves, then commit 44c798799f66 ("sunxi: Use Kconfig CONFIG_MMC") moved instances only for SUNXI. We generally do not like such partial moves. This kind of work is automated by tools/moveconfig.py, so it is pretty easy to complete this move. I am adding "default ARM || PPC || SANDBOX" (suggested by Tom). This shortens the configs and will ease new board porting. This commit was created as follows: [1] Edit Kconfig (remove the "depends on", add the "default", copy the prompt and help message from Linux) [2] Run 'tools/moveconfig.py -y -s -r HEAD MMC' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* Sync defconfig files by savedefconfigMasahiro Yamada2016-12-29-447/+310
| | | | | | | | Generated by "tools/moveconfig -s". This will make config moves easier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* imx: mx6sllevk: add MAINTAINERS filePeng Fan2016-12-27-0/+7
| | | | | | | add MAINTAINERS files Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* board: samsung: update the MAINTAINERS fileJaehoon Chung2016-12-27-5/+5
| | | | | | Update the maintainer from Przemyslaw and Lukasz to me. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
* cmd: net: fix function name in commentBaruch Siach2016-12-27-1/+1
| | | | | | | | | In commit 7044c6bb6 (net: cosmetic: Clean up DHCP variables and functions) BootpCopyNetParams() was renamed to store_net_params(). Update the reference in comment. Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
* fs/ext4: Initialize group descriptor size for revision level 0 filesystemsStefan Brüns2016-12-27-0/+1
| | | | | | | | | | | genext2fs creates revision level 0 filesystems, which are not readable by u-boot due to the initialized group descriptor size field. f798b1dda1c5de818b806189e523d1b75db7e72d Reported-by: Kever Yang <kever.yang@rock-chips.com> Reported-by: FrostyBytes@protonmail.com Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Tested-by: Kever Yang <kever.yang@rock-chips.com>
* disk: Fixed capacity messageJean-Jacques Hiblot2016-12-27-2/+2
| | | | | | | | | | With capacities getting bigger, we can see see messages with negative numbers like "Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)". Here the printed LBA is -387938128 when it should have been 3907029168. To fix this, use the right format when displaying the unsigned integers. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reported-by: Yan Liu <yan-liu@ti.com>
generated by cgit v1.1 at 2024-11-02 17:06:08 +0000