summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* x86: ivybridge: bd82x6x: Support FSP enabled configurationBin Meng2016-02-21-1/+5
| | | | | | | | Wrap initialization codes with #ifndef CONFIG_HAVE_FSP #endif, and enable the build for both FSP and non-FSP configurations. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Make sure HOB list is not overwritten by U-BootBin Meng2016-02-21-0/+43
| | | | | | | | | | | | | | | | | | | | | Intel IvyBridge FSP seems to be buggy that it does not report memory used by FSP itself as reserved in the resource descriptor HOB. The FSP specification does not describe how resource descriptor HOBs are generated by the FSP to describe what memory regions. It looks newer FSPs like Queensbay and BayTrail do not have such issue. This causes U-Boot relocation overwrites the important boot service data which is used by FSP, and the subsequent call to fsp_notify() will fail. To resolve this, we find out the lowest memory base address allocated by FSP for the boot service data when walking through the HOB list in fsp_get_usable_lowmem_top(). Check whether the memory top address is below the FSP HOB list, and if not, use the lowest memory base address allocated by FSP as the memory top address. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on link (ivybridge non-FSP) Tested-by: Simon Glass <sjg@chromium.org>
* superio: Add SMSC SIO1007 driverBin Meng2016-02-21-0/+242
| | | | | | | | | | | The SMSC SIO1007 superio chipset integrates two ns16550 compatible serial ports for legacy applications, 16 GPIO pins and some other functionalities like power management. This adds a simple driver to enable serial port and handle GPIO. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* x86: ivybridge: Add FSP supportBin Meng2016-02-21-0/+131
| | | | | | | | | | IvyBridge FSP package is built with a base address at 0xfff80000, and does not use UPD data region. This adds basic FSP support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested on link (ivybridge non-FSP) Tested-by: Simon Glass <sjg@chromium.org>
* x86: fix memalign() parameter orderStephen Warren2016-02-21-1/+1
| | | | | | | | | | | | Purely by code inspection, it looks like the parameter order to memalign() is swapped; its parameters are (align, size). 4096 is a likely desired alignment, and a variable named size sounds like a size:-) Fixes: 45b5a37836d5 ("x86: Add multi-processor init") Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-02-20-602/+1573
|\
| * vinco: add Maintainers fileAndreas Bießmann2016-02-20-0/+6
| | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
| * ARM: Add Support for the VInCo platformGregory CLEMENT2016-02-19-0/+411
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Versatile Industrial Communication platform is a community oriented board from Landis + Gyr. It comes with: - an RS-485 port - 2 Ethernet ports - a wireless M-BUS - a 4G modem - a 4MB SPI flash - a 4GB eMMC Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> [rebase on current TOT] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: at91: sama5d2: configure the L2 cache memorySamuel Mescoff2016-02-18-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | The SAMA5D2 has a second internal SRAM that can be reassigned as a L2 cache memory. Make sure it is configured as a L2 cache memory when booting from a SPL image. Based on the commit b5ea95ef2b5b from the at91bootstrap repository. Signed-off-by: Samuel Mescoff <samuel.mescoff@mobile-devices.fr> Reviewed-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * arm: at91: Add support for DENX MA5D4 SoM and EVKMarek Vasut2016-02-18-0/+709
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for DENX MA5D4 SoM and MA5D4EVK board, based on the Atmel SAMA5D4 SoC. The SoM contains the SoC, eMMC, SPI NOR, SPI CAN controllers and DRAM, the baseboard contains UART connectors, ethernet port, microSD slot, LCD header, 2x CAN connector and a lot of expansion headers. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * siemens,at91: enable features for smartwebMatthias Michel2016-02-18-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | New features for smartweb: * switch to hush command parser * change autoboot stop to <ESC><ESC> * allow to write ethaddr Signed-off-by: Matthias Michel <matthias.michel@siemens.com> Reviewed-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * board: atmel: clean up the PMC_PLLICPR init codeWenyou Yang2016-02-18-12/+4
| | | | | | | | | | | | | | | | | | Due to introducing the PMC_PLLICPR init function, use this function to clean up the code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: at91: clean up the PMC_PLLICPR init codeWenyou Yang2016-02-18-4/+1
| | | | | | | | | | | | | | | | | | Due to introducing the PMC_PLLICPR init function, use this function to clean up the code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: at91: clock: add PMC_PLLICPR init functionWenyou Yang2016-02-18-0/+15
| | | | | | | | | | | | | | | | To avoid the duplicated code, add the PMC_PLLICPR init function. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * board: atmel: siemens: clean up PLLB codeWenyou Yang2016-02-18-10/+2
| | | | | | | | | | | | | | | | | | Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Heiko Schocher <hs@denx.de>
| * drivers: usb: ohci-at91: clean up the PLLB codeWenyou Yang2016-02-18-15/+7
| | | | | | | | | | | | | | | | | | Due to introducing the new PLLB clock handle functions, use these functions to clean up the PLLB enable/disable code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Heiko Schocher <hs@denx.de>
| * ARM: at91: clock: add PLLB enable/disable functionsWenyou Yang2016-02-18-0/+78
| | | | | | | | | | | | | | | | | | | | To avoid the duplicated code, add the PLLB handle functions. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> Tested-by: Heiko Schocher <hs@denx.de> [add enable/disable functions to arm920t] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * board: atmel: siemens: clean up UTMI PLL codeWenyou Yang2016-02-18-3/+1
| | | | | | | | | | | | | | | | | | Due to introducing the new UTMI PLL clock handle functions, use the functions to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * drivers: usb: atmel: clean up the UTMI PLL codeWenyou Yang2016-02-18-47/+11
| | | | | | | | | | | | | | | | | | Due to introducing the new UTMI PLL clock handle functions, use these function to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: at91: armv7: clean up UTMI PLL handle codeWenyou Yang2016-02-18-12/+3
| | | | | | | | | | | | | | | | | | Due to introducing the UTMI PLL enable function, use this function to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: at91: clock: add UTMI PLL enable/disable functionWenyou Yang2016-02-18-0/+51
| | | | | | | | | | | | | | | | | | To avoid the duplicated code, add the UTMI PLL handle functions, and add PMC_USB init function too. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * drivers: at91: clean up peripheral clock codeWenyou Yang2016-02-18-29/+9
| | | | | | | | | | | | | | | | | | | | Due to introducing the new peripheral clock handle functions, use these functions to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> [fixup for missing clk.h in at91_emac.c] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * board: atmel: clean up peripheral clock codeWenyou Yang2016-02-18-226/+103
| | | | | | | | | | | | | | | | | | | | Due to introducing the new peripheral clock handle functions, use these functions to reduce duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> [Rebased on current master, fixup for at91rm9200ek] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: cpu: at91: clean up peripheral clock codeWenyou Yang2016-02-18-203/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | Due to introducing the new peripheral clock handle functions, use these functions to clean up the duplicated code. Meanwhile, remove unneeded header file include, at91_pmc.h. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com> [fixup for arm920t code] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: at91: clock: add a new file to handle clockWenyou Yang2016-02-18-33/+69
| | | | | | | | | | | | | | | | | | | | To reduce the duplicated code, add a new file to accommodate the peripheral's and system's clock handle code, shared with the SoCs with different ARM core. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * ARM: at91: asm/at91_pmc.h: fix trival register offsetWenyou Yang2016-02-18-6/+2
| | | | | | | | | | | | | | | | Remove unnecessary #ifdef CPU_HAS_PCR. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Heiko Schocher <hs@denx.de> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | arc: cache - utilize IO coherency (AKA IOC) engineAlexey Brodkin2016-02-20-8/+58
| | | | | | | | | | | | | | | | | | | | | | With release of ARC HS38 v2.1 new IO coherency engine could be built-in ARC core. This hardware module ensures coherency between DMA-ed data from peripherals and L2 cache. With L2 and IOC enabled there's no overhead for L2 cache manual maintenance which results in significantly improved IO bandwidth. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | arc: cache - accommodate different L1 cache line lengthsAlexey Brodkin2016-02-20-56/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARC core could be configured with different L1 and L2 (AKA SLC) cache line lengths. At least these values are possible and were really used: 32, 64 or 128 bytes. Current implementation requires cache line to be selected upon U-Boot configuration and then it will only work on matching hardware. Indeed this is quite efficient because cache line length gets hardcoded during code compilation. But OTOH it makes binary less portable. With this commit we allow U-Boot to determine real L1 cache line length early in runtime and use this value later on. This extends portability of U-Boot binary a lot. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FSGuillaume GARDET2016-02-19-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit fd61d39970b9901217efc7536d9f3a61b4e1752a: spl: mmc: add break statements in spl_mmc_load_image() RAW and FS boot modes are now exclusive again. So, if MMCSD_MODE_RAW fails, the board hangs. This patch allows to try MMCSD_MODE_FS then. It has been tested on a beaglebone black to boot on an EXT partition. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Tom Rini <trini@konsulko.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Simon Glass <sjg@chromium.org> Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
* | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-02-19-2190/+4606
|\ \
| * | ARM: tegra: enable USB device mode port on DalmoreStephen Warren2016-02-18-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | This allows U-Boot to expose UMS and DFU protocols on this port in device mode, or to act as a USB host on the port, using an "OTG" (micro-B to female A host) cable. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARM: tegra: don't set CONFIG_USB_MAX_CONTROLLER_COUNTStephen Warren2016-02-18-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | This option is no longer used now that DM_USB is enabled. Fixes: 534f9d3feffd ("dm: tegra: usb: Move USB to driver model") Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | video: tegra: Correct a Kconfig warning with VIDCONSOLE_AS_LCDSimon Glass2016-02-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This new feature causes a Kconfig warning on boards without a display enabled. Fix this. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Clean up the old LCD/PWM driver codeSimon Glass2016-02-16-147/+2
| | | | | | | | | | | | | | | | | | | | | | | | Remove the old PWM code. Remove calls to CONFIG_LCD functions now that we are using driver model for video. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Move LCD driver to use the DM PWM driverSimon Glass2016-02-16-4/+46
| | | | | | | | | | | | | | | | | | | | | | | | Use the driver-model PWM driver in preference to the old code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: Convert CONFIG_PWM_TEGRA to KconfigSimon Glass2016-02-16-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | Move this option to Kconfig and clean up the header files. Adjust the only user (the LCD driver) to work with the new driver. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Move all fdt-decoding into a single functionSimon Glass2016-02-16-159/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | Join the two functions which decode the device tree and put them in the ofdata_to_platdata() method. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Move LCD enums into the driverSimon Glass2016-02-16-22/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is no need to have these in a separate file as they are not referenced from anywhere else. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Remove the static variablesSimon Glass2016-02-16-16/+15
| | | | | | | | | | | | | | | | | | | | | | | | We can move the static variables into the driver-private data. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Convert tegra20 LCD driver to driver modelSimon Glass2016-02-16-255/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move this driver over to use driver model. This involves rearranging the code somewhat. The effect is that everything is run from the probe() method. Boards which use this are fixed up, but only seaboard is tested. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Merge the two config structures togetherSimon Glass2016-02-16-58/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | We have a structure for the display panel and another for the controller. There is some overlap between them. Merge them to simplify the driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Move the check for CONFIG_OF_CONTROL to KconfigSimon Glass2016-02-16-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | We can check this in Kconfig now. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Merge the display driver into one fileSimon Glass2016-02-16-401/+396
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present we have code in arch/arm and code in drivers/video. Move it all into drivers/video since it is a display driver and our current approach is to put all driver code in drivers/. Make a few functions static now that they are not used outside the file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: dts: Sync tegra20.dtsi with Linux v4.4Simon Glass2016-02-16-271/+560
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This file has changed quite a bit since it was set up. Sync it back with Linux v4.4. Adjust the users slightly to cope with the changes: - the host1x node is now called host1x@50000000 - we need a clocks node to provide the clk32k_in phandle - active usb nodes need status = "okay" - active i2c nodes need status = "okay" Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO_TEGRA20Simon Glass2016-02-16-10/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option refers only to the tegra20 video driver, so name it as such to avoid confusion with tegra124. Also move this option to Kconfig. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: nyan-big: Move the LCD driver to driver modelSimon Glass2016-02-16-198/+246
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust the driver to use driver model. The SOR becomes a bridge device. We use the normal simple_panel driver to handle the display itself. We also need to enable some options such as regulators, PWMs and DM_VIDEO itself. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: Allow CONFIG_DM_VIDEO to be used as well as CONFIG_LCDSimon Glass2016-02-16-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | While we transition to using driver model for video, we need to support both options. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: Allow driver model to be used for the PWMSimon Glass2016-02-16-1/+2
| | | | | | | | | | | | | | | | | | | | | We can skip this manual init when using driver model for the PWM. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: lcd: Merge tegra124-lcd.c into display.cSimon Glass2016-02-16-103/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There isn't a lot of benefit of have two separate files. With driver model the code needs to be in the same driver, so it's better to have it in the same file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: pwm: Add a driver for the tegra PWMSimon Glass2016-02-16-0/+90
| | | | | | | | | | | | | | | | | | | | | | | | This PWM supports four channels. The driver always uses the 32KHz clock, and adjusts the duty cycle accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-11-09 19:35:10 +0000