summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* hrcon: Add support for the DH variantDirk Eibach2015-11-12-37/+225
| | | | | | hrcon DH(dual head) has two video outputs per FPGA. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* hrcon: Fix videoboard i2c setupDirk Eibach2015-11-12-2/+8
| | | | | | | | - i2c addresses for the videoboard port expanders were wrong. - the fpga reset signal was not initialized. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* hrcon: Use generic ioep-fpga supportDirk Eibach2015-11-12-239/+9
| | | | | | | The strider platform moved some generic code into ioep-fpga.c. Make use of that on hrcon platform. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* mpc83xx: Add strider boardDirk Eibach2015-11-12-41/+1764
| | | | | | | | | | | | | | The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: Tom Rini <trini@konsulko.com>
* hrcon: Remove CH7301 configurationDirk Eibach2015-11-12-1/+0
| | | | | | | hrcon has no CH7301 DVI-transmitter. Probably not removed when copying from iocon. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* iocon: reset FPGAs in last_stage_init()Reinhard Pfau2015-11-12-1/+7
| | | | | | | - Reset FPGAs in last_stage_init() Signed-off-by: Reinhard Pfau <pfau@gdsys.de> Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* controlcenterd: Disable sideband clocksDirk Eibach2015-11-12-0/+5
| | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* dlvision-10g: Support displayportDirk Eibach2015-11-12-36/+51
| | | | | | Support dlvision-10g hardware with displayport output. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* board: gdsys: Consider DP501 limits on link trainingDirk Eibach2015-11-12-2/+20
| | | | | | | | DP501 only supports DP 1.1a. Limit settings for link bandwidth and lane count to values allowed by DP 1.1a. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* board: gdsys: Increase DP501 I2C retry intervalDirk Eibach2015-11-12-1/+2
| | | | | | | | | With Club 3D dual link adapter there are AUX-channel timeouts when EDID is read. Increasing retry interval time to max (400us) fixes this. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Heiko Schocher <hs@denx.de>
* board: gdsys: Configure DP501 SPDIF inputDirk Eibach2015-11-12-0/+2
| | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Reviewed-by: Heiko Schocher <hs@denx.de>
* i2c: ihs_i2c: Fix hold_bus controlDirk Eibach2015-11-12-1/+1
| | | | | | | | Bus has to be held for repeated start regardless of read/write access. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: ihs_i2c: Use macro bestpracticesDirk Eibach2015-11-12-10/+14
| | | | | | | Reinhard Pfau complained that macros in ihs_i2c do not follow best practices. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Heiko Schocher <hs@denx.de>
* i2c: ihs_i2c: Dual channel supportDirk Eibach2015-11-12-18/+79
| | | | | | | Support two i2c masters per FPGA. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Heiko Schocher <hs@denx.de>
* driver: net: Fix pointer conversion warnings for xilinx_zynqmp_epPrabhakar Kushwaha2015-11-12-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix below warnings happening for xilinx_zynqmp_ep_defconfig drivers/net/zynq_gem.c: In function ‘zynq_gem_init’: drivers/net/zynq_gem.c:330:7: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] ((u32)(priv->rxbuffers) + ^ In file included from drivers/net/zynq_gem.c:19:0: drivers/net/zynq_gem.c:336:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] writel((u32)priv->rx_bd, &regs->rxqbase); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ drivers/net/zynq_gem.c: In function ‘zynq_gem_send’: drivers/net/zynq_gem.c:399:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] writel((u32)priv->tx_bd, &regs->txqbase); ^ ./arch/arm/include/asm/io.h:146:34: note: in definition of macro ‘writel’ #define writel(v,c) ({ u32 __v = v; __iowmb(); __arch_putl(__v,c); __v; }) ^ drivers/net/zynq_gem.c:404:22: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] priv->tx_bd->addr = (u32)ptr; ^ drivers/net/zynq_gem.c:409:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] addr = (u32) ptr; ^ drivers/net/zynq_gem.c:414:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] addr = (u32)priv->rxbuffers; ^ drivers/net/zynq_gem.c: In function ‘zynq_gem_recv’: drivers/net/zynq_gem.c:454:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] net_process_received_packet((u8 *)addr, frame_len); ^ drivers/net/zynq_gem.c: In function ‘zynq_gem_initialize’: drivers/net/zynq_gem.c:533:35: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE); ^ drivers/net/zynq_gem.c:533:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] priv->rx_bd = (struct emac_bd *)((u32)bd_space + BD_SEPRN_SPACE); Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* driver: usb: Fix pointer conversion warnings for hikeyPrabhakar Kushwaha2015-11-12-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix below compilation warings happening for hikey_defconfig drivers/usb/eth/smsc95xx.c:698:56: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); ^ include/common.h:109:26: note: in definition of macro ‘debug_cond’ printf(pr_fmt(fmt), ##args); \ ^ drivers/usb/eth/smsc95xx.c:698:2: note: in expansion of macro ‘debug’ debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg); ^ drivers/usb/eth/smsc95xx.c:718:2: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 2 has type ‘long unsigned int’ [-Wformat=] debug("Tx: len = %u, actual = %u, err = %d\n", ^ drivers/usb/eth/smsc95xx.c: In function ‘smsc95xx_recv’: drivers/usb/eth/smsc95xx.c:802:19: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cur_buf_align = (int)buf_ptr - (int)recv_buf; ^ drivers/usb/eth/smsc95xx.c:802:34: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cur_buf_align = (int)buf_ptr - (int)recv_buf; Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* driver: dwmmc: Fix pointer conversion warnings for hikeyPrabhakar Kushwaha2015-11-12-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix below compilation warings happening for hikey_defconfig drivers/mmc/dw_mmc.c: In function ‘dwmci_set_idma_desc’: drivers/mmc/dw_mmc.c:43:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac); ^ drivers/mmc/dw_mmc.c: In function ‘dwmci_prepare_data’: drivers/mmc/dw_mmc.c:61:35: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac); ^ drivers/mmc/dw_mmc.c:73:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] (u32)bounce_buffer + (i * PAGE_SIZE)); ^ CC drivers/mmc/hi6220_dw_mmc.o drivers/mmc/hi6220_dw_mmc.c: In function ‘hi6220_dwmci_add_port’: drivers/mmc/hi6220_dw_mmc.c:51:17: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] host->ioaddr = (void *)regbase; Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* driver: gpio: hikey: Fix pointer conversion warnings for hikeyPrabhakar Kushwaha2015-11-12-1/+1
| | | | | | | | | | Fix below compilation warnings- drivers/gpio/hi6220_gpio.c: In function ‘hi6220_gpio_probe’: drivers/gpio/hi6220_gpio.c:82:15: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] bank->base = (u8 *)plat->base; Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
* mmc: Use lldiv() for 64-bit division in write_raw_image()Siarhei Siamashka2015-11-12-1/+2
| | | | | | | | | | | | | This fixes compilation problems when using a hardfloat toolchain on ARM, which manifest themselves as "libgcc.a(_udivmoddi4.o) uses VFP register arguments, u-boot does not". These problems have been reported in the U-Boot mailing list: http://lists.denx.de/pipermail/u-boot/2015-October/230314.html http://lists.denx.de/pipermail/u-boot/2015-October/231908.html Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* uuid: add selection by string for known partition type GUIDPatrick Delaunay2015-11-12-2/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | short strings can be used in type parameter of gpt command to replace the guid string for the types known by u-boot partitions = name=boot,size=0x6bc00,type=data; \ name=root,size=0x7538ba00,type=linux; gpt write mmc 0 $partitions and they are also used to display the type of partition in "part list" command Partition Map for MMC device 0 -- Partition Type: EFI Part Start LBA End LBA Name Attributes Type GUID Partition GUID 1 0x00000022 0x0000037f "boot" attrs: 0x0000000000000000 type: ebd0a0a2-b9e5-4433-87c0-68b6b72699c7 type: data guid: d117f98e-6f2c-d04b-a5b2-331a19f91cb2 2 0x00000380 0x003a9fdc "root" attrs: 0x0000000000000000 type: 0fc63daf-8483-4772-8e79-3d69d8477de4 type: linux guid: 25718777-d0ad-7443-9e60-02cb591c9737 Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* gpt: add optional parameter type in gpt commandPatrick Delaunay2015-11-12-0/+67
| | | | | | | | | | | | | | | | code under flag CONFIG_PARTITION_TYPE_GUID add parameter "type" to select partition type guid example of use with gpt command : partitions = uuid_disk=${uuid_gpt_disk}; \ name=boot,size=0x6bc00,uuid=${uuid_gpt_boot}; \ name=root,size=0x7538ba00,uuid=${uuid_gpt_root}, \ type=0fc63daf-8483-4772-8e79-3d69d8477de4; gpt write mmc 0 $partitions Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* part:efi: add GUID for linux file system dataPatrick Delaunay2015-11-12-1/+5
| | | | | | | | | | | Previously, Linux used the same GUID for the data partitions as Windows (Basic data partition: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7). This created problems when dual-booting Linux and Windows in UEFI-GPT Setup, so a new GUID (Linux filesystem data: 0FC63DAF-8483-4772-8E79-3D69D8477DE4) was defined jointly by GPT fdisk and GNU Parted developers. Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
* pci: fix checking PCI_REGION_MEM in pci_hose_phys_to_bus()Cheng Gu2015-11-12-2/+2
| | | | | | | | | | | | | | | When converting between PCI bus and phys addresses, a two pass search was introduced with preference to non-PCI_REGION_SYS_MEMORY regions. See commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf. However, since PCI_REGION_MEM is defined as 0, the if statement was always asserted true: ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) This patch uses PCI_REGION_TYPE bit to check if the region is PCI_REGION_MEM: ((flags & PCI_REGION_TYPE) == PCI_REGION_MEM) Signed-off-by: Cheng Gu <chenggu@marvell.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* include/linux/mtd: Update copyright noticesTom Rini2015-11-12-12/+14
| | | | | | | | Condense these updates down to SPDX tags too while doing this. This is a port of a1452a3771c4eb85bd779790b040efdc36f4274e from the Linux Kernel. Signed-off-by: Tom Rini <trini@konsulko.com>
* board/ti/am335x: beaglebone stop muxing i2c1_pin_muxrobertcnelson@gmail.com2015-11-12-2/+0
| | | | | | | | | | | On the BeagleBone these i2c1 pins are routed to the expanasion header, where they can be defined as either pr1_usart0_Xxd/pwm0/spi0/i2c1, dont assume i2c1 Fixes: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/313894/1387696 Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com> CC: Tom Rini <trini@konsulko.com>
* sunxi: cubietruck: Enable the USB OTG controllerMaxime Ripard2015-11-12-0/+5
| | | | | | | | | | The Cubietruck has a mini-USB connector that can be used to power up the board and as an OTG connector. Since we have already some USB host-only ports right beside this one, enable it in gadget mode Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* sunxi: A13-Olinuxino: Enable the USB OTG controllerMaxime Ripard2015-11-12-0/+3
| | | | | | | | | | The A13-Olinuxino has a mini-USB connector that can be used to power up the board and as an OTG connector. Since we have already some USB host-only ports right beside this one, enable it in gadget mode Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* sparse: Rename the file and headerMaxime Ripard2015-11-12-4/+4
| | | | | | | | | | | | The Android sparse image format is currently supported through a file called aboot, which isn't really such a great name, since the sparse image format is only used for transferring data with fastboot. Rename the file and header to a file called "sparse", which also makes it consistent with the header defining the image structures. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* fastboot: nand: Add pre erase and write hooksMaxime Ripard2015-11-12-0/+18
| | | | | | | | | | | Some devices might need to do some per-partition initialization (ECC/Randomizer settings change for example) before actually accessing it. Add some hooks before the write and erase operations to let the boards define what they need to do if needed. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* fastboot: Implement NAND backendMaxime Ripard2015-11-12-1/+223
| | | | | | | | | So far the fastboot code was only supporting MMC-backed devices for its flashing operations (flash and erase). Add a storage backend for NAND-backed devices. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* sparse: Implement several chunks flashingMaxime Ripard2015-11-12-2/+15
| | | | | | | | | | | | | | | The fastboot client will split the sparse images into several chunks if the image that it tries to flash is bigger than what the device can handle. In such a case, the bootloader is supposed to retain the last offset to which it wrote to, so that it can resume the writes at the right offset when flashing the next chunk. Retain the last offset we used, and use the session ID to know if we need it or not. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* fastboot: Implement flashing session counterMaxime Ripard2015-11-12-9/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fastboot flash command that writes an image to a partition works in several steps: 1 - Retrieve the maximum size the device can download through the "max-download-size" variable 2 - Retrieve the partition type through the "partition-type:%s" variable, that indicates whether or not the partition needs to be erased (even though the fastboot client has minimal support for that) 3a - If the image is smaller than what the device can handle, send the image and flash it. 3b - If the image is larger than what the device can handle, create a sparse image, and split it in several chunks that would fit. Send the chunk, flash it, repeat until we have no more data to send. However, in the 3b case, the subsequent transfers have no particular identifiers, the protocol just assumes that you would resume the writes where you left it. While doing so works well, it also means that flashing two subsequent images on the same partition (for example because the user made a mistake) would not work withouth flashing another partition or rebooting the board, which is not really intuitive. Since we have always the same pattern, we can however maintain a counter that will be reset every time the client will retrieve max-download-size, and incremented after each buffer will be flashed, that will allow us to tell whether we should simply resume the flashing where we were, or start back at the beginning of the partition. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sparse: Implement storage abstractionMaxime Ripard2015-11-12-34/+104
| | | | | | | | | | | The current sparse image parser relies heavily on the MMC layer, and doesn't allow any other kind of storage medium to be used. Rework the parser to support any kind of storage medium, as long as there is an implementation for it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* fastboot: Move fastboot response functions to fastboot coreMaxime Ripard2015-11-12-59/+76
| | | | | | | | | | The functions and a few define to generate a fastboot message to be sent back to the host were so far duplicated among the users. Move them all to a common place. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sparse: Simplify multiple logicMaxime Ripard2015-11-12-4/+10
| | | | | | | | | To check the alignment of the image blocks to the storage blocks, the current code uses a convoluted syntax, while a simple mod also does the work. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sparse: Refactor chunk parsing functionMaxime Ripard2015-11-12-133/+239
| | | | | | | | | | | | The chunk parsing code was duplicating a lot of code among the various chunk types, while all of them could be covered by generic and simple functions. Refactor the current code to reuse as much code as possible and hopefully make the chunk parsing loop more readable and concise. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* sparse: Move main header parsing to a function of its ownMaxime Ripard2015-11-12-21/+24
| | | | | | | | | | | The current sparse image format parser is quite tangled, with a lot of code duplication. Start refactoring it by moving the header parsing function to a function of its own. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* mtd: uboot: Add meaningful error messageMaxime Ripard2015-11-12-1/+1
| | | | | | | | | | The current error message in get_part if CONFIG_MTDPARTS is disabled is "offset is not a number" which is confusing and doesn't help at all. Change that for something that might give a hint on what's going on. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board/BuR/kwb: use bootvx(...) (with bootline feature) instead go(...)Hannes Petermaier2015-11-12-21/+17
| | | | | | | | | | | | | | | | Since we don't have for sure a valid IP-setup during board_late_init(...) because it maybe allready stored in environment or not, we cannot form a proper vxWorks bootline at this place. So we move to the way, forming the bootline just before executing/launching vxWorks. To do this we use the bootvx command instead go. We only have to form the "othbootargs" environment variable, the rest is done pretty good by the "bootvx" commannd. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* Merge branch 'next' of git://git.denx.de/u-boot-blackfinTom Rini2015-11-12-6/+0
|\
| * blackfin: Disable CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED in some casesTom Rini2015-11-04-6/+0
| | | | | | | | | | | | | | | | | | The boards do not link for me due to exceeding their size constrains, change the config so they fit again. Cc: Sonic Zhang <sonic.adi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | nios2: add 3c120 and 10m50 devboards MAINTAINERSThomas Chou2015-11-12-0/+13
| | | | | | | | | | | | | | Add 3c120 and 10m50 devboards MAINTAINERS Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
* | nios2: change README.nios2 to use 10m50 as templateThomas Chou2015-11-12-7/+7
| | | | | | | | | | | | | | | | The 10m50 devboard becomes the new golden reference design of Nios II Linux. So change README.nios2 to use 10m50 as template. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Acked-by: Marek Vasut <marex@denx.de>
* | nios2: rename board nios2-generic to 3c120_devboardThomas Chou2015-11-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Rename board nios2-generic to 3c120_devboard. Since nios2 is converted to driver model and device tree control of u-boot, the nios2-generic board directory is removed. We can rename the board back to a real board name. Now the boards maintained in u-boot mainline are the same as Linux kernel, namely 3c120 and 10m50. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* | nios2: add 10m50 devboard supportThomas Chou2015-11-12-0/+396
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 10m50 devboard support. It is based on the Golden Hardware Reference Design (GHRD), available at, http://rocketboards.org/foswiki/view/Documentation/ AlteraMAX1010M50RevCDevelopmentKitLinuxSetup Though we supported only one nios2-generic board in the past. Now, with the removal of the nios2-generic board dir, adding new nios2 boards to u-boot is easier than before. It should be helpful to add those boards supported in Linux mainline. There are only two such nios2 boards, the 3c120 devboard and 10m50 devboard. The nios2-generic is actually 3c120, and should restore the name. The 10m50 is this one. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
* | net: altera_tse: add mSG-DMA supportThomas Chou2015-11-12-0/+191
| | | | | | | | | | | | | | | | | | | | | | The Modular Scatter-Gather DMA core is a new DMA core to work with the Altera Triple-Speed Ethernet MegaCore. It replaces the legacy Scatter-Gather Direct Memory Access (SG-DMA) controller core. Please find details on the "Embedded Peripherals IP User Guide" of Altera. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
* | net: altera_tse: add priv ops to prepare msgdma supportThomas Chou2015-11-12-25/+81
| | | | | | | | | | | | | | | | Add priv ops to prepare msgdma support. These ops are dma type specific. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
* | net: altera_tse: wait sgdma in altera_tse_recvThomas Chou2015-11-12-1/+1
| | | | | | | | | | | | | | | | Move the sgdma wait from free_pkt to recv. This is the proper place to wait recv sgdma done. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
* | net: altera_tse: factor out stop mac funcThomas Chou2015-11-12-15/+21
| | | | | | | | | | | | | | Factor out the stop mac function to prepare msgdma support. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
* | net: zap altera_tse_initialize prototypesThomas Chou2015-11-12-3/+0
| | | | | | | | | | | | | | | | Zap the altera_tse_initialize() prototypes, since it is converted to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-09 06:04:10 +0000