summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* mpc85xx/t104x: Enable L2 and CPC cache when resumeTang Yuantian2014-07-22-76/+98
| | | | | | | | | | | When resume from deep sleep, uboot needs to enable L2 and CPC cache, or they would be keeping unusable in kernel because kernel didn't enble or initialized them. This patch didn't change the existing L2 cache enabling code, just put them in a function. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/chassis2: Configure and enable L2 cache for PPC clusters onlyShaveta Leekha2014-07-22-1/+2
| | | | | | Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/t4240qds: fix offset of serdes when checking reference clockShaohui Xie2014-07-22-4/+12
| | | | | | | | T4240 has 4 serdes, each serdes has 4k memory space, two PLLs. We use PLL1CR0 to check the serdes reference clock. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/ddr: Fix DDR register timing_cfg_8York Sun2014-07-22-0/+3
| | | | | | | The field wrtord_bg should add 2 clocks if on the fly chop is enabled, according to DDR controller manual for DDR4. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/ifc: fix invalid CSn FTIM2.TCH settingShaohui Xie2014-07-22-7/+7
| | | | | | | | | On some platforms, CSn FTIM2.TCH is set to zero which is invalid, an invalid hold time makes DUT timing variances, whether it works or not on luck. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Check return value of find_tlb_idxYork Sun2014-07-22-67/+198
| | | | | | | | | | find_tlb_idx() is called in board_early_init_r() on multiple boards. The return value is not checked before being used to disable a TLB. In normal case the return value wouldn't be -1. In case of a mis- configuration during porting to a new board, checking the return value may be helpful to reveal some user errors. Signed-off-by: York Sun <yorksun@freescale.com>
* driver/ddr: Fix DDR4 driver for ARMYork Sun2014-07-22-2/+13
| | | | | | | Previously the driver was only tested on Power SoCs. Different barrier instructions are needed for ARM SoCs. Signed-off-by: York Sun <yorksun@freescale.com>
* powerpc/t1040qds: Initialize EPHY2 clock to RGMII onlyvijay rai2014-07-22-1/+7
| | | | | | | | | Setting FPGA register brdcfg9 EPHY2 bits to '0' to initialize EPHY2 clock to RGMII mode. Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/nand: Add support of 16K SRAM for IFC 2.0Prabhakar Kushwaha2014-07-22-2/+10
| | | | | | | | | Internal SRAM has been incresed from 8KB to 16KB for IFC cotroller ver 2.0. Update the page offset calculation logic to support the same. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl/pcie: Change 'no link' to 'undetermined' for pcie endpointZang Roy-R619112014-07-22-2/+8
| | | | | | | | | | | Even u-boot boots up, the pcie link may not setup correctly when Freescale SOC acts as endpoint. So change the link status from 'no link' to 'undetermined' to reduce the confusion. The link status can check from host side eventually. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/nand: Update SRAM initialize logic for IFC.Prabhakar Kushwaha2014-07-22-4/+33
| | | | | | | | | | | | | IFC controller v1.1.0 requires internal SRAM initialize by reading NAND flash. Higher controller versions have provided "SRAM init" bit in NCFGR register space. update SRAM initialize logic to reflect the same. Also print error message in case of Page read error. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* driver/nand:Define MAX_BANKS same as SoC defined for IFCPrabhakar Kushwaha2014-07-22-1/+5
| | | | | | | | | | The number of chip select used by IFC controller vary from one SoC to other. For eg. P1010 has 4, T4240 has 8. Update MAX_BANKS same as SoC defined Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Remove P1023 RDS supportLijun Pan2014-07-22-949/+0
| | | | | | | | | | Since P1023RDS is no longer supported/manufactured by Freescale, we clean up P1023RDS related code. Since P1023RDB is still supported by Freescale, we keep P1023RDB releated code. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/mpc85xx: Removed support for G4060Sandeep Singh2014-07-22-2/+0
| | | | | | | G4060 has no PA cores, hence removing its support. Signed-off-by: Sandeep Singh <Sandeep@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* qe: move immap_qe.h from arch directory into common directoryZhao Qiang2014-07-22-9/+9
| | | | | | | | ls1021 is arm-core and supports qe too. Move immap_qe.h into common directory for both arm and powerpc. Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* board/t2080qds: enable sst and eon spi flash for nor bootShengzhou Liu2014-07-22-1/+1
| | | | | | | | Remove unnecessary condition CONFIG_RAMBOOT_PBL to have SST and EON SPI flash work in case of NOR boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* net/fm: call fm_port_to_index() with proper checksRotariu Marian-Cristian2014-07-22-1/+8
| | | | | | | | Some of the fm_port_to_index() callers did not check for -1 return value and used -1 as an array index. Signed-off-by: Marian Rotariu <marian.rotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/85xx: add fdt_fixup_dma3Shengzhou Liu2014-07-22-0/+47
| | | | | | | | On some SoC(e.g. T2080/T4240) the 3rd DMA is not functional if SRIO2 is chosen. we add fdt_fixup_dma3() to disable the 3rd DMA if SRIO2 is chosen. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* m68k: define __kernel_size_t as unsinged int againMasahiro Yamada2014-07-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ddc94378d changed the definition of __kernel_size_t from unsigned int to unsigned long. It is true that it fixed warnings on some crosstools but it increased warnings on the others. The problem is that we cannot see consistency in terms of the typedef of __kernel_size_t on M68K architecture. However, I'd like to suggest to have __kernel_size_t to be unsigned int again. Rationale: [1] Linux Kernel defines __kernel_size_t on M68K as unsigned int. Let's stick to the Linux's way. [2] We want to build boards with popular pre-built toolchains, not the one locally-built by indivisuals. I think m68-linux-gcc which can be downloaded from www.kernel.org is the candidate for our _recommended_ toolchains. With this patch, all the m68k boards can be built without any warnings. Give it a try with the following crosstools: https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.6.3/ x86_64-gcc-4.6.3-nolibc_m68k-linux.tar.xz or https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ x86_64-gcc-4.9.0-nolibc_m68k-linux.tar.xz (The latter is newer.) Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jason Jin <Jason.jin@freescale.com>
* m68k: fix an undefined behavior warning of M5253DEMO boardMasahiro Yamada2014-07-22-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest GCC is so clever that it reports more warnings than old ones did: ------------------------------>8------------------------------ board/freescale/m5253demo/flash.c: In function 'flash_get_offsets': board/freescale/m5253demo/flash.c:65:23: warning: iteration 2047u invokes undefined behavior [-Waggressive-loop-optimizations] info->start[k + 1] = info->start[k] + CONFIG_SYS_SST_SECTSZ; ^ board/freescale/m5253demo/flash.c:64:3: note: containing loop for (k = 0, j = 0; j < CONFIG_SYS_SST_SECT; j++, k++) { ^ ------------------------------8<------------------------------ The cause of the warning is like this: The for statement iterates 2048 times in flash_get_offsets() func. (Notice CONFIG_SYS_SST_SECT is defined as 2048) The last iteration does info->start[2048] = info->start[2047] + CONFIG_SYS_SST_SECTSZ; causing an undefined behavior. (Please note the array size of info->start is 2048. CONFIG_SYS_MAX_FLASH_SECT is defined as 2048 for this board.) This commit fixes that so as not to overrun the info->start array. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Jason Jin <Jason.jin@freescale.com>
* boards.cfg: re-claim ownership for TQM8xx boardsWolfgang Denk2014-07-22-9/+9
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Ethernet: let user know if there is no valid ethernet addressPavel Machek2014-07-22-8/+21
| | | | | | Improve error messages in case of invalid/unset ethernet addresses. Signed-off-by: Pavel Machek <pavel@denx.de>
* board_r: run scsi init() on ARM tooIan Campbell2014-07-22-4/+1
| | | | | | | | | | | | | | | | | This has been disabled for ARM in initr_scsi since that function was introduced. However it works fine for me on Cubieboard and Cubietruck (with the upcoming AHCI glue patch). I also tested on two random ARM platforms which seem to define CONFIG_CMD_SCSI: - highbank worked fine (on midway hardware) - omap5_uevm built OK and I confirmed using objdump that things were as expected (i.e. the default weak scsi_init nop was used). While there remove the mismatched comment from the #endif (omitting the comment seems to be the prevailing style in this file). Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Simon Glass <sjg@chromium.org>
* AHCI: Increase link timeout to 200msIan Campbell2014-07-22-1/+1
| | | | | | | | | | | | | In 73545f75b66d "ahci: wait longer for link" I increased the timeout to 40ms based on the observed behaviour of a WD disk on a Cubietruck. Since then Karsten Merker and myself have both observed timeouts with HGST disks (Karsten on Cubietruck, me on Cubieboard2). Increasing the timeout to ~175ms fixes this, so go to 200ms for a bit of headroom. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Karsten Merker <merker@debian.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
* .gitignore: clean-up unnecessary entriesMasahiro Yamada2014-07-22-4/+0
| | | | | | | | | There have been /errlog and /reloc_off in the top level .gitignore since commit 1b4aaffe added it about 7 years ago. But they are no longer generated. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Update .mailmap using scripts/mailmapperMasahiro Yamada2014-07-22-0/+15
| | | | | | | | | | | Add more entries to .mailmap for the canonical names with 50 commits or more. This commit was generated by the following command: scripts/mailmapper > tmp; mv tmp .mailmap Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* scripts: add mailmapper, a tool to create/update mailmap fileMasahiro Yamada2014-07-22-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This tool helps to create/update the mailmap file. It runs 'git shortlog' internally and searches differently spelled author names which share the same email address. The author name with the most commits is asuumed to be a canonical real name. If the number of commits from the cananonical name is equal to or greater than 'MIN_COMMITS' (=50), the entry for the cananical name will be output. ('MIN_COMMITS' is used here because we do not want to create a fat mailmap by adding every author with only a few commits.) If there exists a mailmap file specified by the mailmap.file configuration options or '.mailmap' at the toplevel of the repository, it is used as a base file. The base file and the newly added entries are merged together and sorted alphabetically (but the comment block is kept untouched), and then printed to standard output. Usage ----- scripts/mailmapper prints the mailmapping to standard output. scripts/mailmapper > tmp; mv tmp .mailmap will be useful for updating '.mailmap' file. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* add .mailmap for proper git-shortlog outputMasahiro Yamada2014-07-22-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the first version of .mailmap created by hand. Please see "man git-shortlog" for what this commit is trying to do. Without this file, for example, "git shortlog -n -s" shows as follows: 2693 Wolfgang Denk <------ 1002 Stefan Roese <------ 811 wdenk <------ 808 Mike Frysinger 806 Simon Glass [snip] 177 Matthias Fuchs 154 stroese <------ 153 Timur Tabi And then, with this file, it shows as follows: 3504 Wolfgang Denk <------ 1156 Stefan Roese <------ 808 Mike Frysinger 806 Simon Glass Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefan Roese <sr@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* whitespace cleanupsPavel Machek2014-07-22-5/+5
| | | | | | Whitespace cleanups. Signed-off-by: Pavel Machek <pavel@denx.de>
* Makefile: fix tags target documentationIgor Grinberg2014-07-22-1/+2
| | | | | | | | Replace the TAGS target name by the actual ctags target name. Also, add etags target documentation. Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* Makefile: fix ctags/etags clean targetsIgor Grinberg2014-07-22-1/+1
| | | | | | | | | | | | | | Commit efcf861 (kbuild: use scripts/Makefile.clean) refactored the cleaning targets and accidentially replaced the actually generated "ctags" and "etags" files in the file list by "tags" and "TAGS". "tags" and "TAGS" are not part of the Makefile build targets and therefore should not be a part of the list for clean targets. Substitute the actually generated files instead, to fix the clean targets behavior. Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* Makefile: fix the {c, e}tags/cscope build targetsIgor Grinberg2014-07-22-2/+2
| | | | | | | | | | | | | | | | Commit 9e41403 (kbuild: change out-of-tree build) changed the U-Boot build working directory to the output tree for the out-of-tree builds. This broke the {c,e}tags/cscope build targets as TAG_SUBDIRS variable collected directories based on assumption that the build working directory is the U-Boot source tree directory. Fix the {c,e}tags/cscope build targets by adding the $(srctree) prefix. Also, remove the $(obj) prefix from the etags build target to finish the $(obj) prefix removal started by the same commit. Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* rpi_b: handle import of environments in files with CRLF as line endingsAlexander Holler2014-07-22-1/+1
| | | | | | Use the new option -r for env import. Signed-off-by: Alexander Holler <holler@ahsoftware.de>
* am335x_evm: handle import of environments in files with CRLF as line endingsAlexander Holler2014-07-22-1/+1
| | | | | | Use the new option -r for env import. Signed-off-by: Alexander Holler <holler@ahsoftware.de>
* omap3_beagle: handle import of environments in files with CRLF as line endingsAlexander Holler2014-07-22-1/+1
| | | | | | Use the new option -r for env import. Signed-off-by: Alexander Holler <holler@ahsoftware.de>
* Add option -r to env import to allow import of text files with CRLF as line ↵Alexander Holler2014-07-22-9/+36
| | | | | | | | | | | | | | endings When this option is enabled, CRLF is treated like LF when importing environments from text files, which means CRs ('\r') in front of LFs ('\n') are just ignored. Drawback of enabling this option is that (maybe exported) variables which have a trailing CR in their content will get imported without that CR. But this drawback is very unlikely and the big advantage of letting Windows user create a *working* uEnv.txt too is likely more welcome. Signed-off-by: Alexander Holler <holler@ahsoftware.de>
* h2200: Disable SHA256 on FIT imagesTom Rini2014-07-22-0/+1
| | | | | | | This board is close in binary size to one of its hard limits, so disable SHA256 FIT image support to gain some breathing room. Signed-off-by: Tom Rini <trini@ti.com>
* lib/time.c cleanupsPavel Machek2014-07-22-8/+10
| | | | | | | | | | As I initially suspected overflow in time handling, I took a detailed look at lib/time.c. This adds comments about units being used, reduces amount of type casting being done, and makes __udelay() always wait at least one tick. (Current code could do no delaying at all for short delays). Signed-off-by: Pavel Machek <pavel@denx.de>
* common: cmd_ide: use __weak and add prototypesJeroen Hofstee2014-07-22-38/+17
| | | | | | | | | | | clang chokes about the concept of having an alias to an always_inlined function. gcc likely just ignores the always inlined since binary sizes are equal before and after this patch. Convert the aliases to weak functions and provide missing prototypes. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* common: cmd_ide: remove PIO modeJeroen Hofstee2014-07-22-84/+0
| | | | | | | | Since no board defines CONFIG_TUNE_PIO this is just dead code, so remove it. cc: Pavel Herrmann <morpheus.ibis@gmail.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* serial: ns16550: use a const variable instead of macroMasahiro Yamada2014-07-22-3/+3
| | | | | | | | Just for type checking. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* serial: ns16550: use DIV_ROUND_CLOSEST macro to compute the divisorMasahiro Yamada2014-07-22-7/+3
| | | | | | | | | The function still returns the same value. The comment block is no longer necessary because our intention is clear enough by using DIV_ROUND_CLOSEST() macro. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* serial: ns16550: drop CONFIG_OMAP1610 from the special caseMasahiro Yamada2014-07-22-6/+0
| | | | | | | | | | | | | | | | | | | If CONFIG_OMAP1610 is defined, the code returning the fixed value (26) is enabled. But this case is covered by the following code. (CONFIG_SYS_NS16550_CLK + (gd->baudrate * (MODE_X_DIV / 2))) / (MODE_X_DIV * gd->baudrate) = (48000000 + (115200 * (16 / 2))) / (16 * 115200) = 48921600 / 1843200 = 26 The "#ifdef CONFIG_OMAP1610" was added by commit 6f21347d more than ten years ago. In those days, the divide-and-round was not used. I guess that is why this weird code was added here. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com> Cc: Rishi Bhattacharya <rishi@ti.com>
* bootp can use mdelayPavel Machek2014-07-22-3/+2
| | | | | | | Cleanup bootp code by using mdelay. Signed-off-by: Pavel Machek <pavel@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* spl: nand: read only in the size of image_header on the first accessMasahiro Yamada2014-07-22-3/+3
| | | | | | | | | | | For the same reason as in commit 50c8d66d, all the remaining CONFIG_SYS_NAND_PAGE_SIZE in common/spl/spl_nand.c can be replaced with sizeof(*header). Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tim Harvey <tharvey@gateworks.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* catch wrong load address passed to fatload / ext2loadPavel Machek2014-07-22-1/+4
| | | | | | | | If filename is passed instead of address to ext2load or fatload, u-boot silently accepts that, and uses 0 for load address and default filename from environment. That is confusing, display help instead. Signed-off-by: Pavel Machek <pavel@denx.de>
* Fix help text of ext2load and fatload.Pavel Machek2014-07-22-2/+2
| | | | | | | Fix help text of ext2load and fatload to match code in fs/fs.c Signed-off-by: Pavel Machek <pavel@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
* tools: compiler.h: add missing time.hJeroen Hofstee2014-07-22-0/+1
| | | | | | | | | | genimg_print_time uses time_t, but time.h is never included. Linux gets away with this since types.h includes time.h. Explicitly include the header file so building on e.g. FreeBSD also works. cc: Tom Rini <trini@ti.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
* driver/usb: include upper/lower_32_bits() from linux/compat.hLijun Pan2014-07-22-4/+2
| | | | | | | upper_32_bits() and lower_32_bits() have been ported into linux/compat.h. Start use them now in drivers/usb/host/xhci.h. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
* linux/compat.h: port lower_32_bits and upper_32_bits from LinuxLijun Pan2014-07-22-0/+19
| | | | | | | | | | | | | | [backport from linux commit 204b885e and 218e180e7] 64 bit processors are becomming more and more popular. lower_32_bits and upper_32_bits save our labor doing shifts/manipulations like (u32)(n) and (u32)((n) >> 32). They are good helpers in both little and big endian cases. Port these two functions here from Linux:include/linux/kernel.h, cater the comment message to little/big endian cases. Later on, developers could include linux/compat.h if they want to use these two functions. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>