summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sandbox: Add serial uartSimon Glass2011-10-17-0/+64
| | | | | | | | This uart simply writes to stdout and reads from stdin. We might imagine instead buffering the data so that a test interface can check output and inject input. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add main programSimon Glass2011-10-17-1/+34
| | | | | | Add a main program so that we can run U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add OS dependent layerSimon Glass2011-10-17-5/+135
| | | | | | | We want to keep all OS-dependent code in once place, with a simple interface to U-Boot. For now, this is that place. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Force command sections to be 4-byte alignedSimon Glass2011-10-17-1/+2
| | | | | | | | | | | By default sections are 16-byte aligned on some architectures, but the command name structure (struct cmd_tbl_s) does not have padding to 16 bytes. This reduces the alignment to 4-bytes so that the command table can be accessed correctly on any architecture. (Note: this needs doing properly) Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Disable standalone/API supportSimon Glass2011-10-17-3/+6
| | | | | | | This is not useful on the sandbox architecture since we can simply link all our code with U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Disable built-in mallocSimon Glass2011-10-17-0/+2
| | | | | | | We prefer to U-Boot's malloc but for now it is easier to use the C library's version. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add bootm supportSimon Glass2011-10-17-4/+3
| | | | | | | | | This adds sandbox architecture support to bootm, although it is probably not useful to load sandbox code into the address space and execute it. This change at least make the file build correctly on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add board info for architectureSimon Glass2011-10-17-4/+30
| | | | | | | | | This is required for the bdinfo command to work. Signed-off-by: Simon Glass <sjg@chromium.org> Fix syntax error. Signed-off-by: Wolfgang Denk <wd@denx.de>
* sandbox: Add sandbox boardSimon Glass2011-10-17-0/+92
| | | | | | | This adds basic files for the sandbox board. The lds file is very simple since we can rely mostly on the linker defaults. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add architecture lib filesSimon Glass2011-10-17-0/+366
| | | | | | | | | | These files are taken from the ARM board implementation and then reduced to remove unneeded cruft. Ideally we would work towards unifying arch/xxx/lib files, particularly board.c. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add cpu filesSimon Glass2011-10-17-0/+164
| | | | | | | | This is an initial implementation with all functions defined but not working. The lds file is very simple since we can mostly rely on the linker defaults. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add compiler defines to support a 64-bit x86_64 platformSimon Glass2011-10-17-1/+15
| | | | | | This sets __WORDSIZE to 8 correctly on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Add architecture image supportSimon Glass2011-10-17-0/+4
| | | | | | | We won't actually load an image with this architecture, but we still need to define it. Signed-off-by: Simon Glass <sjg@chromium.org>
* Fix use of int as pointer in image.cSimon Glass2011-10-17-2/+2
| | | | | | | It is better to use %p in this case. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* sandbox: Add architecture header filesSimon Glass2011-10-17-0/+739
| | | | | | | This adds required header files for the sandbox architecture, and a basic description of what sandbox is (README.sandbox). Signed-off-by: Simon Glass <sjg@chromium.org>
* arm: ca9x4_ct_vxp: enable PXE BOOTP options supportJason Hobbs2011-10-17-0/+3
| | | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Matt Waddel <matt.waddel@linaro.org>
* arm: ca9x4_ct_vxp: enable pxe command supportJason Hobbs2011-10-17-0/+4
| | | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Matt Waddel <matt.waddel@linaro.org>
* Convert ca9x4_ct_vxp to standard env variablesJason Hobbs2011-10-17-6/+6
| | | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Matt Waddel <matt.waddel@linaro.org>
* net: bootp: add PXE/RFC 4578 DHCP options supportJason Hobbs2011-10-17-0/+40
| | | | | | | | | | These options are required to be present in RFC 4578 compliant DHCP requests. They give more information to DHCP servers to allow serving different DHCP responses to different systems based on client architecture, client capabilities, UUID, or vendor. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* Add pxe commandJason Hobbs2011-10-17-0/+1604
| | | | | | | | | | | | Add pxe command, which is intended to mimic PXELINUX functionality. 'pxe get' uses tftp to retrieve a file based on UUID, MAC address or IP address. 'pxe boot' interprets the contents of PXELINUX config like file to boot using a specific initrd, kernel and kernel command line. This patch also adds a README.pxe file - see it for more details on the pxe command. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* lib: add uuid_str_to_bin for use with bootp and PXE uuidJason Hobbs2011-10-17-0/+90
| | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* README: document standard image variablesJason Hobbs2011-10-17-0/+19
| | | | | | | | With these documented, we can start pushing towards standardizing their use across boards. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Mike Frysinger <vapier@gentoo.org>
* Replace space and tab checks with isblankJason Hobbs2011-10-17-16/+23
| | | | | | | These are various places I found that checked for conditions equivalent to isblank. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* cosmetic: remove unneeded curly bracesJason Hobbs2011-10-17-4/+2
| | | | | | This prevents a checkpatch warning in the patch to use isblank Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* Add isblankJason Hobbs2011-10-17-0/+6
| | | | | | | | | | | Existing ctype checks are implemented using a 256 byte lookup table, allowing each character to be in any of 8 character classes. Since there are 8 existing character classes without the blank class, I implemented isblank without using the lookup table. Since there are only two blank characters - tab and space - this is a more reasonable approach than doubling the size of the lookup table to accommodate one more class. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* common: add run_command2 for running simple or hush commandsJason Hobbs2011-10-17-31/+29
| | | | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* common, menu: use abortboot for menu timeoutJason Hobbs2011-10-17-14/+47
| | | | Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* Add generic, reusable menu codeJason Hobbs2011-10-17-0/+543
| | | | | | | This will be used first by the pxe code, but is intended to be generic and reusable for other jobs in U-boot. Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
* DM9000:Add a byte swap macro for dm9000 io operation.Jason Jin2011-10-17-1/+9
| | | | | | | | | | | | | commit a45dde2293c816138e53c26eca6fd0322583f9a6 changed the dm9000 direct register access to standard IO. This should work on the ColdFire platform as there are corresponding macros for the LE devices. But the hardware settings on some ColdFire boards had swapped the byte order which make the original macros such as out_le16 cannot work. To avoid changing the common io access code on ColdFire platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use __raw* IO access on some ColdFire boards. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* kw_gpio: fix error in kw_gpio_direction_inputHolger Brunck2011-10-17-1/+1
| | | | | | | | | The function kw_gpio_is_valid returns zero on success, so adapt the error check accordingly. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> cc: Dieter Kiermaier <dk-arm-linux@gmx.de>
* Blackfin: bfin_spi: fix build error when DEBUG is definedMike Frysinger2011-10-17-1/+1
| | | | | | The new debug() changes pointed out debug code that rotted a little. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: define CONFIG_SYS_CACHELINE_SIZEMike Frysinger2011-10-17-0/+74
| | | | | | | | Common U-Boot API wants this define, so import asm/cache.h from Linux to provide suitable defines. Acked-by: Anton Staaf <robotboy@chromium.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* video: Moving mx3fb.c to CONFIG_VIDEOHelmut Raiger2011-10-17-209/+297
| | | | | | | | | | | | | | | | | | | | | | | | | mx3fb.c was based on CONFIG_LCD and is moved by this patch to CONFIG_VIDEO, which has greater freedom in selecting videomodes even at runtime. This renders the accumulating list of display defines (CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as these may be setup through env variables: uboot> setenv mydisplay 'video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925, le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0' uboot> setenv videomode ${mydisplay} This commit also fixes the board config files for qong and imx31_phycore boards as needed. The videomode settings of previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased to make the frame buffer allocation working with the changed driver. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx31: make HSP clock for mx3fb driver availableHelmut Raiger2011-10-17-13/+42
| | | | | | | | | | | | This additionally updates mx31/generic.c by - replacing __REG() macro accesses with readl() and writel() - providing macros for PDR0 and PLL bit accesses Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* MX5: Make IPU display output and pixel format configurableMarek Vasut2011-10-17-8/+18
| | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* VIDEO: MX5: export pix formatStefano Babic2011-10-17-45/+77
| | | | | | | | | | | Pixel format defines must be available for boards to set up the right display. Move them and export in a new file. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* VIDEO: MX5: Switch MX5 to CONFIG_VIDEOStefano Babic2011-10-17-95/+62
| | | | | | | | | | | | | | | | | The framebuffer driver for MX5 is based on CONFIG_LCD. In the current implementation, there is a serious bug because the required memory is allocated before relocation, but the driver knows only later which is the resolution of the display. The patch switches the driver to CONFIG_VIDEO and the memory is allocated by the driver itself. We also need to switch the vision2 board code and config file in the same commit so that this commit will be bisectable. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* video: update the Freescale DIU driver to use linux/fb.hTimur Tabi2011-10-17-49/+5
| | | | | | | | Update the Freescale DIU video driver (fsl_diu_fb.c) to use linux/fb.h. Some data structures from this header file were just copied into fsl_diu_fb.c. Signed-off-by: Timur Tabi <timur@freescale.com>
* powerpc: cpm2 boards: update fcc register logicMike Frysinger2011-10-17-69/+69
| | | | | | | | | | | In the recent dropping of !NET_MULTI code (commit e2a53458a7ab37523304), I misread the logic in include/net.h. Some of it was used by NET_MULTI code as glue between the multi/non-multi worlds for cpm2 boards. Rather than restore the block of code, push the logic to the board config headers where it all belongs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* zlib: handle overflow while calculating available stream input sizeAnatolij Gustschin2011-10-17-0/+8
| | | | | | | | | | | | | | | | | | | | | If compressed data is located in sectors at the end of the flash and it's offset + input stream size > 0xFFFFFFFF, the uncompressing time is very long, since processing of the stream is done bytewise (and not blockwise) due to overflow in inflate_fast() while calculation and checking for enough input available. Check for this overflow condition and limit the available stream input size to the actually max. possible input size. This fixes the problem. The issue is easily reproduceable by placing a gziped bitmap in flash, e.g. at FFF80000, and running 'bmp' commands like 'bmp info FFF80000' or 'bmp display FFF80000'. The uncompressing can take up to 3 sec. whereas it should normaly take a fraction of a second. If the 'splashimage' environment variable points to this address, the booting time also increases significantly. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* serial_exit: punt unused prototypeMike Frysinger2011-10-15-1/+0
| | | | | | | No code defines or calls this, so drop the prototype. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Simon Glass <sjg@chromium.org>
* punt unused clean/distclean targetsMike Frysinger2011-10-15-2321/+0
| | | | | | | | | | The top level Makefile does not do any recursion into subdirs when cleaning, so these clean/distclean targets in random arch/board dirs never get used. Punt them all. MAKEALL didn't report any errors related to this that I could see. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* common: fix missing function pointer relocation in fixup_cmdtable()Daniel Schwierzeck2011-10-15-0/+6
| | | | | | | | | | | The command auto-completion does not work on architectures relying on CONFIG_NEEDS_MANUAL_RELOC like MIPS. Cause is the missing function pointer fixup for cmd_tbl_t::complete function in fixup_cmdtable(). This patch adds the missing pointer fixup in case of CONFIG_AUTO_COMPLETE is defined. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
* mpc5200: digsy_mtc: fix detection of Coral-PAAnatolij Gustschin2011-10-15-0/+1
| | | | | | | | | A delay of approximately 250 ms after PCI bus reset in pci_mpc5xxx_init() is needed to recognize the Coral-PA controller on the graphic extention board. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* pci: move pcidelay code to new location just before PCI bus scanAnatolij Gustschin2011-10-15-13/+17
| | | | | | | | | | | | | | | | | | | | PCI cards might need some time after reset to respond. On some boards (mpc5200 or mpc8260 based) the PCI bus reset is deasserted at pci_init_board() time, so we currently can not use available "pcidelay" option for waiting before PCI bus scan since this waiting takes place before calling pci_init_board(). By moving the pcidelay code to the new location using of the "pcidelay" option is possible on mpc5200 or mpc8260 based boards, too. Since pci_hose_scan() could be called multiple times, restrict the function to wait only during its first call and to ignore pcidelay for any further call (as pointed out by Matthias). Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Tested-by: Matthias Fuchs <matthias.fuchs@esd.eu>
* net: axi_ethernet: Add driver to u-bootMichal Simek2011-10-15-0/+667
| | | | | | | | | | Add axi_ethernet driver for little-endian Microblaze. RX/TX BDs and rxframe buffer are shared among all axi_ethernet MACs. Only one MAC can work in one time. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Mike Frysinger <vapier@gentoo.org>
* net: emaclite: Fix coding styleMichal Simek2011-10-15-30/+27
| | | | | | Coding style should follow linux coding style. Signed-off-by: Michal Simek <monstr@monstr.eu>
* net: emaclite: Use PKTSIZE directlyMichal Simek2011-10-15-6/+4
| | | | | | Do not setup additional ENET_MAX_MTU macro. Signed-off-by: Michal Simek <monstr@monstr.eu>
* net: emaclite: Setup RX/TX ping pong for every instanceMichal Simek2011-10-15-55/+68
| | | | | | | Setup RX/TX ping-pong buffer for every emaclite IP separately. The next patch move initialization directly to board code. Signed-off-by: Michal Simek <monstr@monstr.eu>
* Merge branch 'master' of git://git.denx.de/u-boot-fdtWolfgang Denk2011-10-15-11/+21
|\ | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-fdt: powerpc/85xx: use fdt_create_phandle() to create the Fman firmware phandles fdt: update fdt_alloc_phandle to use fdt_get_phandle fdt: check for fdt errors in fdt_create_phandle fdt: Add a do_fixup_by_path_string() function
generated by cgit v1.1 at 2024-11-07 14:41:21 +0000