summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* warp7: Add README fileMarco Franchi2016-06-18-0/+63
| | | | | | | Add a README file for helping users to install U-Boot into the eMMC. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* warp7: Fix watchdog resetMarco Franchi2016-06-18-0/+22
| | | | | | | | | | | | | The latest version of warp7 board provides the connection of the WDOG1_B pin to the PMIC. Program the watchdog to enable the WDOG1_B output which causes a POR reset. Based on the imx7dsabresd code. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx: mx6ulevk: change QSPI PAD DSE to 120ohmPeng Fan2016-06-18-1/+1
| | | | | | | | | | | The current pad DSE for QSPI is 60ohm. This setting cause too strong drive to clock and data signals. Need to change the DSE to 120ohm for better signal quality. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx6ulevk: fix LCD_nPWREN settingPeng Fan2016-06-18-1/+1
| | | | | | | | | | Q901 is PMOS, LCD_nPWREN should be at low voltage then output is 3V3. If LCD_nPWREN is high, output is 2.4V which is not correct. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* imx6ulevk: fix 74LV OE usagePeng Fan2016-06-18-3/+1
| | | | | | | | | | | | | | | Fix 74LV OE gpio index. gpio index is wrong, so gpio output will not have effect, since we use wrong GPIO5_IO18, but not correct GPIO5_IO8. And at the end of the initialization of 74lv init, should keep OE voltage level at LOW to make 74lv output the correct voltage. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx7dsabresd: Fix LCD_PWR_EN output settingYe Li2016-06-18-1/+1
| | | | | | | | | | | | LCD_PWR_EN controls the G pin of Q13 PMOS which needs low voltage to connect D to S for outputting LCD 3.3V. If LCD_PWR_EN is high, we measured the LCD 3v3 is actually 1.2V. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* mx6sabresd: Allow LVDS backlight to be functional after a kernel rebootMarco Franchi2016-06-18-2/+16
| | | | | | | | | | | | | | | Currently the LVDS backlight does not work in U-Boot after a “reboot” comand in the kernel. This problem occurs because the kernel uses this pin in PWM mode and U-Boot does not configure the backlight pin as GPIO functionality. So fix the problem by explicitly configuring the backlight pin as GPIO in U-Boot. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Acked-by: Stefano Babic <sbabic@denx.de> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
* Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2016-06-18-23059/+40302
|\ | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * siemens,am33x: add draco etamin boardHeiko Schocher2016-06-09-4/+348
| | | | | | | | | | | | | | | | | | | | | | | | | | In the draco CPU board family, etamin is a new variant with bigger flash and more RAM. Due to new flash that uses larger pages (4K) some changes are necessary because it impacts the MTD partition layout and the ubi mount parameters. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Heiko Schocher <hs@denx.de> [trini: Move BOOTDELAY into defconfig, just always be 3 now] Signed-off-by: Tom Rini <trini@konsulko.com>
| * dfu, nand, ubi: fix erasing after write finishHeiko Schocher2016-06-09-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | writting to ubi nand partitions need after write ends an erase of the remaining sectors. This fail, if dfu write size was not a multiple of erasesize, example log: Failure erase: -1 Fix this error. Signed-off-by: Heiko Schocher <hs@denx.de>
| * am335x, dxr2: get ECC sType from I2C eepromHeiko Schocher2016-06-09-1/+44
| | | | | | | | | | | | | | | | | | | | read the ECC Type field from the i2c eeprom, instead configuring it static in the U-Boot binary. see RM: Table 26-17. NAND Geometry Information on I2C EEPROM Signed-off-by: Heiko Schocher <hs@denx.de>
| * mtd: nand: omap: allow to switch to BCH16Heiko Schocher2016-06-09-2/+8
| | | | | | | | | | | | | | support in omap_nand_switch_ecc() also an eccstrength from 16. Signed-off-by: Heiko Schocher <hs@denx.de>
| * nand: add nand mtd concat supportHeiko Schocher2016-06-09-0/+41
| | | | | | | | | | | | | | | | add for nand devices mtd concat support. Generic MTD concat support is already ported to mainline, and used in the cfi_mtd driver. This patch adds it similiar for nand devices. Signed-off-by: Heiko Schocher <hs@denx.de>
| * ubi: add new ubi command "ubi detach"Heiko Schocher2016-06-09-11/+27
| | | | | | | | | | | | simple detachs ubi from the mtd partition. Signed-off-by: Heiko Schocher <hs@denx.de>
| * siemens,am33x: add ubi fastmap supportSamuel Egli2016-06-09-0/+2
| | | | | | | | | | | | From: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Heiko Schocher <hs@denx.de>
| * am335x, shc: add support for the am335x based bosch shc boardHeiko Schocher2016-06-09-0/+1791
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot SPL 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:40:06) SHC C3-Sample MPU reference clock runs at 6 MHz Setting MPU clock to 594 MHz Enabling Spread Spectrum of 18 permille for MPU Trying to boot from MMC reading u-boot.img reading u-boot.img U-Boot 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:05:35 +0100) Watchdog enabled I2C: ready DRAM: 512 MiB reloc off 1f783000 MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Net: cpsw U-Boot# Signed-off-by: Heiko Schocher <hs@denx.de>
| * doc, spl, am335x: update am335x-networkHeiko Schocher2016-06-09-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | on the shc board we see when booting in net boot mode, that the ROM bootloader sends "AM335x ROM" as vendor-class-identifier. U-Boots doc says "DM814x ROM". So, add the info to the doc, that there is also "AM335x ROM" possible. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * armv7: omap-common: make SPL board_mmc_init() weakHeiko Schocher2016-06-09-1/+1
| | | | | | | | | | | | | | make this function weak, so board code can setup in SPL MMC init with board special values. Signed-off-by: Heiko Schocher <hs@denx.de>
| * mmc: omap_hsmmc: enable 8bit interface for eMMC for AM33xxHeiko Schocher2016-06-09-0/+1
| | | | | | | | | | | | | | Enable 8bit interface on HSMMC2 for am33xx to support 8bit eMMC chips. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mmc: revert mmc: Handle switch error status bit in MMC card statusHeiko Schocher2016-06-09-3/+1
| | | | | | | | | | | | | | | | | | revert patch: commit: 6b2221b008e0: mmc: Handle switch error status bit in MMC card status to get eMMC working on shc board Signed-off-by: Heiko Schocher <hs@denx.de>
| * bootstage: call show_boot_progress also in SPLHeiko Schocher2016-06-09-3/+13
| | | | | | | | | | | | show_boot_progress() is now called from SPL also. Signed-off-by: Heiko Schocher <hs@denx.de>
| * arm, am335x: Enable Spread Spectrum for the MPUHeiko Schocher2016-06-09-1/+76
| | | | | | | | | | | | | | | | Enable Spread Spectrum for the MPU by calculating the required values and setting the registers accordingly. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * am335x: add some missing CM_CLKMODE_DPLL_SSC macrosHeiko Schocher2016-06-09-0/+3
| | | | | | | | | | | | | | | | | | | | add missing CM_CLKMODE_DPLL_SSC_ACK_MASK, CM_CLKMODE_DPLL_SSC_DOWNSPREAD_MASK and CM_CLKMODE_DPLL_SSC_TYPE_MASK defines. Used for enabling spread spectrum. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * arm, am335x: add some missing GPIO register definitionsHeiko Schocher2016-06-09-0/+2
| | | | | | | | | | | | | | | | | | add missing: OMAP_GPIO_IRQSTATUS_SET_0 and OMAP_GPIO_IRQSTATUS_SET_1 registers. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * power, tps65217: add some definesHeiko Schocher2016-06-09-0/+3
| | | | | | | | | | | | | | | | add the following defines, needed for the upcoming shc board support: Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * tests: py: disable main_signon check for printenv cmdHeiko Schocher2016-06-09-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | if CONFIG_VERSION_VARIABLE is set, the U-Boot environment contains a "vers" variable with the current U-Boot version string. If now "printenv" is called, test/py fails as it detects the main_sign string, which is in this case correct. So check only the main_sign as an error, if CONFIG_VERSION_VARIABLE is not set. Signed-off-by: Heiko Schocher <hs@denx.de>
| * common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig optionHeiko Schocher2016-06-09-590/+788
| | | | | | | | | | | | | | | | | | | | | | move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * tiny-printf: Correct the snprintf() implementationSimon Glass2016-06-09-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | This current code passes the variable arguments list to sprintf(). This is not correct. Fix it by calling _vprintf() directly. This makes firefly-rk3288 boot again. Fixes: abeb272 ("tiny-printf: Support snprintf()") Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
| * ARM: uniphier: insert dsb barrier to ensure visibility of storeMasahiro Yamada2016-06-09-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | I noticed secondary CPUs sometimes fail to wake up, and the root cause is that the sev instruction wakes up slave CPUs before the preceding the register write is observed by them. The read-back of the accessed register does not guarantee the order. In order to ensure the order between the register write and the sev instruction, a dsb instruction should be executed prior to the sev. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * ARM: uniphier: do not erase when updating U-Boot image in eMMC deviceMasahiro Yamada2016-06-09-1/+0
| | | | | | | | | | | | Unlike NAND, eMMC can be re-written without erasing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * ARM: uniphier: do not overwrite fdt_file environmentMasahiro Yamada2016-06-09-0/+3
| | | | | | | | | | | | | | | | This code auto-detects the best-match FDT file name, but it should respect the user's choice if "fdt_file" environment is found in a saved set of environments. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * ARM: uniphier: check return code of setenv()Masahiro Yamada2016-06-09-3/+1
| | | | | | | | | | | | Because setenv() may fail, it is better to check its return code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * ARM: uniphier: fix boot mode for PH1-LD11Masahiro Yamada2016-06-09-1/+18
| | | | | | | | | | | | | | This function is shared between PH1-LD11 and PH1-LD20. The difference is the boot-mode latch for the USB boot mode. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * ARM: uniphier: support eMMC boot for PH1-LD11 and PH1-LD20Masahiro Yamada2016-06-09-4/+157
| | | | | | | | | | | | | | | | The Boot ROM on PH1-LD11/LD20 exports built-in APIs to load images from an eMMC device. They are useful to reduce the memory footprint of SPL, rather than compiling the whole MMC framework. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * Prepare v2016.07-rc1Tom Rini2016-06-06-2/+2
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
| * Merge http://git.denx.de/u-boot-samsungTom Rini2016-06-06-1486/+3141
| |\ | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/peach-pi_defconfig configs/peach-pit_defconfig
| | * ARM: exynos: Disable serial support in SPLMarek Vasut2016-05-26-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The exynos5 platforms use DM in U-Boot and do not use DM in SPL. The serial driver, serial_s5p.c, is DM-only. This is OK for U-Boot, but in SPL, this will fail with the following compile error: drivers/built-in.o: In function `get_current': ...u-boot/drivers/serial/serial.c:387: undefined reference to `default_serial_console' This warning happens because common/console.c is compiled into U-Boot SPL if CONFIG_SPL_SERIAL_SUPPORT . The common/console.c invokes serial_*() functions and since exynos5 does not use DM in SPL, these functions come from drivers/serial/serial.c . The serial_*() locate default serial port by calling default_serial_console(), but because the serial_s5p.c is DM-only, it does no longer define default_serial_console(). Thus the error. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * ARM: exynos: Fix build error if SERIAL is disabled in SPLMarek Vasut2016-05-26-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_SPL_SERIAL_SUPPORT is not defined in include/configs/exynos5-common.h the following error is produced during the build of the SPL: arch/arm/mach-exynos/built-in.o: In function `do_lowlevel_init': ...u-boot/arch/arm/mach-exynos/lowlevel_init.c:221: undefined reference to `debug_uart_init' Add additional condition to check if SPL build is in progress and in that case check if CONFIG_SPL_SERIAL_SUPPORT is also set before enabling the debug UART. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: video: Drop old unused codeSimon Glass2016-05-25-227/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we are using driver model, we can drop the weak functions and LCD init in the board file. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: video: Convert several boards to driver model for videoSimon Glass2016-05-25-216/+377
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update several boards to use driver model for video. This involves changes to the EDP and FIMD (frame buffer) drivers. Existing PWM, simple-panel and pwm-backlight drivers are used. These work without additional configuration since they use the device tree settings in the same way as Linux. Boards converted are: - snow - spring - peach-pit - peach-pi All have been tested. Not converted: - MIPI display driver - s5pc210_universal - smdk5420 - smdk5250 - trats - trats2 Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: video: Rename variables for driver modelSimon Glass2016-05-25-373/+370
| | | | | | | | | | | | | | | | | | | | | | | | Use 'priv' for a private pointer and 'regs' for a register pointer. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: video: Rename edp_device_info to exynos_dp_privSimon Glass2016-05-25-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rename this function to better fit with driver model. It is the private data for the exynos EDP driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: dts: Add display-related device tree fragmentsSimon Glass2016-05-25-3/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bring in device tree pieces related to display from Linux 4.4 for: - snow - peach_pit - peach_pi - spring Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: Simplify calling of exynos_dp_phy_ctrl()Simon Glass2016-05-25-14/+4
| | | | | | | | | | | | | | | | | | | | | | | | This function controls enabling the EDP PHY. Rename it and drop the existing weak functions, which are confusing. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: Allow PWM0 pinmux to be set upSimon Glass2016-05-25-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | This is commonly used for LCD backlight control. Add pinmux support for it on exynos5250 and 5420. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * dts: Add clock and regulator binding files for max77802Simon Glass2016-05-25-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | These are used by peach_pit and peach_pi. Add them so they can be referenced in the device tree files. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: Disable LCD display for boards we can't convertSimon Glass2016-05-25-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | Some boards have the LCD enabled but I cannot test operation for the driver model conversion. Disable the LCD on these to avoid build errors. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: Allow CONFIG_MISC_COMMON to be build without an LCDSimon Glass2016-05-25-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | This file currently requires LCD support. Adjust it so that it can still be built without LCD support (even thought it won't work fully). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: Allow tizen to be built without an LCDSimon Glass2016-05-25-0/+4
| | | | | | | | | | | | | | | | | | | | | This file currently requires an LCD. Adjust it to work without one. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * exynos: dts: Add pwm device tree nodeSimon Glass2016-05-25-0/+14
| | | | | | | | | | | | | | | | | | | | | Add this node from Linux v4.4 so that PWMs can be used in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-11-08 09:48:12 +0000