summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3Alexander Graf2016-11-17-0/+11
| | | | | | | | | | Some boards decided not to run ATF or other secure firmware in EL3, so they instead run U-Boot there. The uEFI spec doesn't know what EL3 is though - it only knows about EL2 and EL1. So if we see that we're running in EL3, let's get into EL2 to make payloads happy. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
* x86: Enable EFI loader supportSimon Glass2016-11-14-2/+2
| | | | | | | | | | | | | | | | | | | | | Enable this so that EFI applications (notably grub) can be run under U-Boot on x86 platforms. At present the 'hello world' EFI application is not supported for the qemu-x86_efi_payload64 board. That board builds a payload consisting of a 64-bit header and a 32-bit U-Boot, which is incompatible with the way the EFI loader builds its EFI application. The following error is obtained: x86_64-linux-ld.bfd: i386 architecture of input file `lib/efi_loader/helloworld.o' is incompatible with i386:x86-64 output This could be corrected with additional Makefile rules. For now, this feature is disabled for that board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [agraf: drop hello kconfig bits] Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: x86: Adjust EFI files support efi_loaderSimon Glass2016-11-14-5/+22
| | | | | | | | | Add compiler flags and make a few minor adjustments to support the efi loader. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Add Kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
* x86: Move efi .S files into the 'lib' directorySimon Glass2016-11-14-20/+20
| | | | | | | | These files now need to be in a standard place so that they can be located by generic Makefile rules. Move them to the 'lib' directory. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* x86: Move efi .lds files into the 'lib' directorySimon Glass2016-11-14-1/+1
| | | | | | | | These files now need to be in a standard place so that they can be located by generic Makefile rules. Move them to the 'lib' directory. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: arm: Add aarch64 EFI app supportSimon Glass2016-11-14-1/+297
| | | | | | | | | Add support for EFI apps on aarch64. This includes start-up and relocation code plus a link script. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: add kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: arm: Add EFI app supportSimon Glass2016-11-14-1/+292
| | | | | | | | | Add support for EFI apps on ARM. This includes start-up and relocation code, plus a link script and some compiler setting changes. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Remove whitespace change, add kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
* elf: arm: Add a few ARM relocation typesSimon Glass2016-11-14-2/+17
| | | | | | | | Rather than hard-coding the relocation type, add it to the ELF header file and use it from there. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: Add support for a hello world test programSimon Glass2016-11-14-6/+107
| | | | | | | | | It is useful to have a basic sanity check for EFI loader support. Add a 'bootefi hello' command which loads HelloWord.efi and runs it under U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> [agraf: Fix documentation, add unfulfilled kconfig dep] Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: Makefile: Export variables for use with EFISimon Glass2016-11-14-0/+9
| | | | | | | | | | | | | | | | When building an EFI app we need three things: - start-up code - relocation code - link script These are all different for each architecture. We also need special compiler flags in some cases. Add top-level Makefile variables for these along with documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* x86: Tidy up selection of building the EFI stubSimon Glass2016-11-14-4/+7
| | | | | | | | | | | | | | At present we use a CONFIG option in efi.h to determine whether we are building the EFI stub or not. This means that the same header cannot be used for EFI_LOADER support. The CONFIG option will be enabled for the whole build, even when not building the stub. Use a different define instead, set up just for the files that make up the stub. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: Fix debug message address formatSimon Glass2016-11-14-1/+1
| | | | | | | This should use U-Boot's standard format for hex address. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: Correct cache flush alignmentSimon Glass2016-11-14-1/+2
| | | | | | | | Make sure that the cache flushes correctly by ensuring that the end address is correctly aligned. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* x86: Correct a build warning in x86 tablesSimon Glass2016-11-14-0/+2
| | | | | | | | | There is a build warning for three x86 boards since write_smbios_table_wrapper() is not used. Fix it. Fixes: e824cf3f (smbios: Allow compilation on 64bit systems) Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: console: Correctly report modesEmmanuel Vadot2016-11-14-16/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for EFI console modes. Mode 0 is always 80x25 and present by EFI specification. Mode 1 is always 80x50 and not mandatory. Mode 2 and above is freely usable. If the terminal can handle mode 1, we mark it as supported. If the terminal size is greater than mode 0 and different than mode 1, we install it as mode 2. Modes can be switch with cout_set_mode. Changes in V5: Correctly detect mode before enabling mode 2. Changes in V4: Reset cursor positon on mode switch Use local variables in console query code Changes in V3: Valid mode are 0 to EFIMode-1 Fix style Changes in V2: Add mode switch Report only the modes that we support Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* efi: Use device device path type Messaging for network interface nodeOleksandr Tymoshenko2016-11-14-8/+22
| | | | | | | | | When adding network interface node use Messaging device path with subtype MAC Address and device's MAC address as a value instead of Media Device path type with subtype File Path and path "Net" Signed-off-by: Oleksandr Tymoshenko <gonzo@bluezbox.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* efi_loader: fix depends on line of EFI_LOADERMasahiro Yamada2016-11-14-1/+1
| | | | | | | | | | | | | | This line is shown as depends on (ARM64 ||\302\240ARM) && OF_LIBFDT on my Emacs. Use ASCII characters only. Assuming it is (ARM64 || ARM), remove the redundancy. Unlike Linux, CONFIG_ARM includes CONFIG_ARM64 in U-Boot. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Alexander Graf <agraf@suse.de>
* Prepare v2016.11Tom Rini2016-11-14-1/+1
| | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* MAINTAINERS: mark sunxi status as OrphanHans de Goede2016-11-14-3/+1
| | | | | | | | | | | | Ian has not had any time for sunxi for some time now and I'm in the same situation now, so I'm stepping down as sunxi custodian and marking the sunxi support as Orphan. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* video: bmp: Fix compilation errors with CONFIG_BMP_xxBPP enabledStefan Roese2016-11-13-3/+3
| | | | | | | | | | | | | | | | | | | | | Compiling the 'bmp' command with DM and having one of the following macros enabled: CONFIG_BMP_16BPP, CONFIG_BMP_24BPP ONFIG_BMP_32BPP generates this error: drivers/video/video_bmp.c: In function ‘video_bmp_display’: drivers/video/video_bmp.c:315:22: error: ‘lcd_line_length’ undeclared (first use in this function) fb -= width * 2 + lcd_line_length; ^ This patch moves to using the correct variable instead and enables the 'bmp' command for DM again. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de>
* net: write enetaddr down to hardware on env_callbackMarek Vasut2016-11-13-0/+1
| | | | | | | | | | | | If mac-address is changed using "setenv ethaddr ...." command the new mac-adress also must be written into the responsible ethernet driver. This fixes the legacy ethernet handling. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Hannes Schmelzer <oe5hpm@oevsv.at> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at>
* spi: ti_qspi: Fix baudrate divider calculationVignesh R2016-11-13-9/+7
| | | | | | | | | Fix the divider calculation logic to choose a value so that the resulting baudrate is either equal to or closest possible baudrate less than the requested value. While at that, cleanup ti_spi_set_speed(). Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* ARM: dts: dra7xx: Update spi-max-frequency for qspi slave nodeVignesh R2016-11-13-2/+2
| | | | | | | | | Update the spi-max-frequency property of m25p80 flash slave to match that of TI QSPI controller node, so that QSPI operations happen at maximum supported frequency of 76.8MHz. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* ARM: k2g: Update PLL Multiplier and divider valuesLokesh Vutla2016-11-13-1/+1
| | | | | | | | | | | Only a certain set of PLLM/D values are recommended to configure the DDR at the required speeds for a given clock input frequency. Updating these values as specified in Data Sheet[1] Table 5-18 [1] http://www.ti.com/lit/ds/symlink/66ak2g02.pdf Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: keystone2: PLL: Enable glitch free initialization sequenceLokesh Vutla2016-11-13-8/+8
| | | | | | | | | | Update the PLL initialization sequence to avoid glitches while programming. User guide for the same is available at[1]. [1] http://www.ti.com/lit/ug/sprugv2h/sprugv2h.pdf Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: Set TTB XN bit in case DCACHE_OFF for LPAE modeKeerthy2016-11-13-1/+6
| | | | | | | | | | | | | | | | | While we setup the mmu initially we mark set_section_dcache with DCACHE_OFF flag. In case of non-LPAE mode the DCACHE_OFF macro is rightly defined with TTB_SECT_XN_MASK set so as to mark all the 4GB XN. In case of LPAE mode XN(Execute-never) bit is not set with DCACHE_OFF. Hence XN bit is not set by default for DCACHE_OFF which keeps all the regions execute okay and this leads to random speculative fetches in random memory regions which was eventually caught by kernel omap-l3-noc driver. Fix this to mark the regions as XN by default. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: print the cache config option in hex instead of decimalKeerthy2016-11-13-1/+1
| | | | | | | Printing the option value in hex makes it more comprehensible. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* mx6ull_14x14_evk: Add README fileDiego Dorta2016-11-13-0/+36
| | | | | | | | | Add a README file to help users getting started with the board. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* davinci: omapl138_lcdk: keep booting even when MAC address is invalidFabien Parent2016-11-13-6/+8
| | | | | | | | | | | | If the MAC address specified on the EEPROM is invalid (multicast or zero address), then u-boot fails to boot. Having a bad MAC address in the EEPROM should not prevent the system from booting. This commit changes the error path to just print an error messages in case of bad MAC address. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: am335x/mux: Do not hang when encountering a bad EEPROMAlex G2016-11-13-2/+2
| | | | | | | | | | | | | | | | | | | | | In most cases, the SPL and u-boot.img will be on the same boot media. Since the SPL was loaded by the boot rom, the pinmux will already have been configured for this media. This, the board will still be able to boot successfully, or at least reach the u-boot console, where more recovery options are available. I've encountered this on a beaglebone black with a corrupted EEPROM. Removing this check allowed the board to boot successfully. I've also seen this on EVM-based boards with an unprogrammed EEPROM. On those boards, for some reason there were no UART messages. This made it look as if the SOC was dead. Remove the hang(), as it is not a fatal error. Also reformat the error message to be clearer as to the cause. The original message made it appear as if the wrong binary was being loaded. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* igep00x0: add Hynix timingsLadislav Michl2016-11-13-4/+16
| | | | | | | | | Tested on IGEPv2 with Micron MT29F4G16ABBDA3W and Hynix H27S4G6F2DKA-BM Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Javier Martinez Canillas <javier@samsung.com> Tested-by: Javier Martinez Canillas <javier@samsung.com>
* igep00x0: consolidate defconfigsLadislav Michl2016-11-13-36/+5
| | | | | | | | Defconfigs should remain the same except CONFIG_SYS_EXTRA_OPTIONS. Drop NAND specific defconfig as flash type is runtime detected. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Javier Martinez Canillas <javier@samsung.com>
* igep00x0: disable CONFIG_DISPLAY_BOARDINFOLadislav Michl2016-11-13-18/+3
| | | | | | | | | | | As a single U-Boot binary can now run on various board modifications, drop CONFIG_DISPLAY_BOARDINFO as it prints flash memory information too early to give us chance to easily detect it. Also saves few bytes as a bonus. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Javier Martinez Canillas <javier@samsung.com> Tested-by: Javier Martinez Canillas <javier@samsung.com>
* tools: fix mksunxiboot build for tools-all targetAndre Przywara2016-11-13-1/+1
| | | | | | | | | | | | Commit fed329aebe3a ("tools: add mksunxiboot to tools-all target") added mksunxiboot to the tools-all target, but used the CONFIG_SUNXI symbol to enable its build. Now commit aec9a0f19f64 ("sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXI"), merged before that, renamed that symbol, so that the first patch basically gets ineffective. Adjust the symbol name in tools/Makefile to make it build again. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2016-11-08-32/+69
|\
| * ARM: tegra186: call secure monitor for all cache-wide opsStephen Warren2016-11-07-3/+21
| | | | | | | | | | | | | | | | | | An SMC call is required for all cache-wide operations on Tegra186. This patch implements the two missing hooks now that U-Boot supports them, and fixes the mapping of "hook name" to SMC call code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * armv8: add hooks for all cache-wide operationsStephen Warren2016-11-07-11/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC-specific logic may be required for all forms of cache-wide operations; invalidate and flush of both dcache and icache (note that only 3 of the 4 possible combinations make sense, since the icache never contains dirty lines). This patch adds an optional hook for all implemented cache-wide operations, and renames the one existing hook to better represent exactly which operation it is implementing. A dummy no-op implementation of each hook is provided. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: translate __asm_flush_l3_cache to assemblyStephen Warren2016-11-07-23/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When performing a cache disable function, code must not access DRAM. That is because when the cache is disabled, it will be bypassed and all loads and stores will be serviced by RAM. This prevents accessing any dirty data in the cache. In turn, this means the stack cannot be used, since that is in RAM. To guarantee that code doesn't use RAM (and in particular the stack) __asm_flush_l3_cache() must be manually implemented in assembly, rather than implemented in C since the compiler won't know not to touch RAM. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * ARM: tegra: ensure nvtboot_boot_x0 alignmentStephen Warren2016-11-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | nvtboot_boot_x0 is a 64-bit variable and hence must be 64-bit aligned. So far this has happened by accident! Fix the code so this is guaranteed. This fixes the following build error: ... relocation truncated to fit: R_AARCH64_LDST64_ABS_LO12_NC against symbol `nvtboot_boot_x0' ... Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-11-07-24/+1849
|\ \
| * | net: use random ethernet address if invalid and not zeroSiva Durga Prasad Paladugu2016-11-07-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use random ethernet address if the ethernet address found is invalid, not zero and config for random address is defined. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: mvgbe: Fix build error with CONFIG_PHYLIBChris Packham2016-11-07-22/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 5a49f17481bb ("net: mii: Use spatch to update miiphy_register") updated the mvgbe implementation of smi_reg_read/smi_reg_write. Prior to that change mvgbe_phy_read and mvgbe_phy_write where used as wrappers to satisfy the phylib APIs. Because these functions weren't updated in that commit build errors where triggered when CONFIG_PHYLIB was enabled. Fix these build errors by removing mvgbe_phy_read and mvgbe_phy_write and using smi_reg_read/smi_reg_write directly. Signed-off-by: Chris Packham <judge.packham@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: phy: micrel: center FLP burst timing at 16msAsh Charles2016-11-07-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like [1], reset the FLP burst timing for the KSZ9031 to the 16ms specified by the IEEE802.3 standard from the chip's default of 8ms. For more details, see the "Auto-Negotiation Timing" section of the KSZ9031RNX datasheet. [1] https://patchwork.kernel.org/patch/6558371/ Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | ARM: tegra: enable Ethernet on p2771-0000Stephen Warren2016-11-07-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the Ethernet device in DT, provide board-specific configuration, and enable the driver in Kconfig. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DTStephen Warren2016-11-07-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra186 includes a Synopsys DWC EQoS (Ethernet) device. Add this to the Tegra186 SoC DT so that boards can make use of it. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | ARM: tegra: configure Ethernet address on Tegra186Stephen Warren2016-11-07-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Tegra186, the bootloader which runs before U-Boot passes the Ethernet MAC address to U-Boot using device tree. Extract this value and write it to the environment, so that the Ethernet uclass picks it up and uses it for the built-in Ethernet device. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | ARM: tegra: add SoC-level hook for board_late_init()Stephen Warren2016-11-07-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the Tegra186 implementation of board_late_init() to call a per-SoC "hook" function. This will allow SoC-specific (rather than Tegra-wide) functionality to be implemented without the core Tegra code needing to be aware of the details. While board186.c is currently only used for Tegra186, it should be applicable to any other future SoC, and perhaps its simple design could be back-ported to older SoCs in the future too. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: add driver for Synopsys Ethernet QoS deviceStephen Warren2016-11-07-0/+1564
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver supports the Synopsys Designware Ethernet QoS (Quality of Service) a/k/a eqos IP block, which is a different design than the HW supported by the existing designware.c driver. The IP supports many options for bus type, clocking/reset structure, and feature list. This driver currently supports the specific configuration used in NVIDIA's Tegra186 chip, but should be extensible to other combinations quite easily, as explained in the source. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> # V1 Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | dt: net: add DWC EQoS bindingStephen Warren2016-11-07-0/+166
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Synopsys DWC EQoS is a configurable Ethernet MAC/DMA IP block which supports multiple options for bus type, clocking and reset structure, and feature list. This patch imports the binding from the Linux kernel, including my V3 patch to extend the binding to cover the Tegra186, which is applied for next-20160912. So far, my changes have been acked by Lars Persson, the original author of the binding. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | wandboard: Make Ethernet functional againFabio Estevam2016-11-06-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit ce412b79e7255770 ("drivers: net: phy: atheros: add separate config for AR8031") ethernet does not work on mx6sabresd. This commit correctly assigns ar8031_config() as the configuration function for AR8031 in the same way as done in the Linux kernel. However, on wandboard design we need some additional configuration, such as enabling the 125 MHz AR8031 output that needs to be done in the board file. This also aligns with the same method that the kernel performs the AR8031 fixup in arch/arm/mach-imx/mach-imx6q.c. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.1 at 2024-11-05 11:48:27 +0000