summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* video: Moving mx3fb.c to CONFIG_VIDEOHelmut Raiger2011-10-13-209/+297
| | | | | | | | | | | | | | | | | | | | | | | | | mx3fb.c was based on CONFIG_LCD and is moved by this patch to CONFIG_VIDEO, which has greater freedom in selecting videomodes even at runtime. This renders the accumulating list of display defines (CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as these may be setup through env variables: uboot> setenv mydisplay 'video=ctfb:x:240,y:320,depth:16,mode:0,pclk:185925, le:9,ri:17,up:7,lo:10,hs:1,vs:1,sync:100663296,vmode:0' uboot> setenv videomode ${mydisplay} This commit also fixes the board config files for qong and imx31_phycore boards as needed. The videomode settings of previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased to make the frame buffer allocation working with the changed driver. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* mx31: make HSP clock for mx3fb driver availableHelmut Raiger2011-10-13-13/+42
| | | | | | | | | | | | This additionally updates mx31/generic.c by - replacing __REG() macro accesses with readl() and writel() - providing macros for PDR0 and PLL bit accesses Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* MX5: Make IPU display output and pixel format configurableMarek Vasut2011-10-13-8/+18
| | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Stefano Babic <sbabic@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* VIDEO: MX5: export pix formatStefano Babic2011-10-13-45/+77
| | | | | | | | | | | Pixel format defines must be available for boards to set up the right display. Move them and export in a new file. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* VIDEO: MX5: Switch MX5 to CONFIG_VIDEOStefano Babic2011-10-13-95/+62
| | | | | | | | | | | | | | | | | The framebuffer driver for MX5 is based on CONFIG_LCD. In the current implementation, there is a serious bug because the required memory is allocated before relocation, but the driver knows only later which is the resolution of the display. The patch switches the driver to CONFIG_VIDEO and the memory is allocated by the driver itself. We also need to switch the vision2 board code and config file in the same commit so that this commit will be bisectable. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Anatolij Gustschin <agust@denx.de> Tested-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* video: update the Freescale DIU driver to use linux/fb.hTimur Tabi2011-10-13-49/+5
| | | | | | | | Update the Freescale DIU video driver (fsl_diu_fb.c) to use linux/fb.h. Some data structures from this header file were just copied into fsl_diu_fb.c. Signed-off-by: Timur Tabi <timur@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsWolfgang Denk2011-10-12-1/+2804
|\ | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mips: MIPS: Jz4740: Add qi_lb60 board support MIPS: Jz4740: Add NAND driver MIPS: Ingenic XBurst Jz4740 processor support
| * MIPS: Jz4740: Add qi_lb60 board supportXiangfu Liu2011-10-12-1/+460
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device from Qi hardware: http://en.qi-hardware.com/wiki/Ben_NanoNote http://en.qi-hardware.com/wiki/Main_Page http://en.wikipedia.org/wiki/Qi_hardware This Jz4740-based clamshell device does not use NOR flash to boot. The initial bring-up assumes that U-Boot is directly loaded into SDRAM using USB boot tool, and starts from 0x80100000. About USB boot tool ------------------- Jz4740 is one of the XBurst processors with USB boot functionality supported. The CPU can boot from a small ROM in the LSI, initialize CPU and USB module, then wait for USB commands from the USB host. We can send 8 KB binary data to the CPU cache using USB boot tool. USB boot tool is available to the public at Ingenic website. Also there is an alternative Debian package named xburst-tools. Signed-off-by: Xiangfu Liu <xiangfu@openmobilefree.net> Acked-by: Daniel <zpxu@ingenic.cn> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| * MIPS: Jz4740: Add NAND driverXiangfu Liu2011-10-12-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Jz4740 NAND flash controller can support: * MLC NAND as well as SLC NAND * all 8-bit/16-bit NAND flash devices * HAMMING and RS hardware ECC * automatic boot up from NAND flash devices nand_ecclayout is set up for 2GiB NAND chip mounted in Qi LB60. We'll bring up boot-from-NAND support in nand_spl/ in the future. Signed-off-by: Xiangfu Liu <xiangfu@openmobilefree.net> Acked-by: Daniel <zpxu@ingenic.cn> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
| * MIPS: Ingenic XBurst Jz4740 processor supportXiangfu Liu2011-10-10-0/+2082
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jz4740 is a multimedia application processor targeting for mobile devices like e-Dictionary, eBook, portable media player (PMP) and GPS navigator. Jz4740 is powered by Ingenic 360 MHz XBurst CPU core (JzRISC), in which RISC/SIMD/DSP hybrid instruction set architecture provides high integration, high performance and low power consumption. JzRISC incorporated in Jz4740 is the advanced and power-efficient 32-bit RISC core, compatible with MIPS32, with 16K I-Cache and 16K D-Cache, and can operate at speeds up to 400 MHz. On-chip modules such as LCD controller, embedded audio codec, multi- channel SAR-ADC, AC97/I2S controller and camera I/F offer a rich suite of peripherals for multimedia application. NAND controller (SLC/MLC), USB (host 1.1 and device 2.0), UART, I2C, SPI, etc. are also available. For more info about Ingenic XBurst Jz4740: http://en.ingenic.cn/eng/ http://www.linux-mips.org/wiki/Ingenic This patch introduces XBurst CPU support in U-Boot. It's compatible with MIPS32, but requires a bit different cache maintenance, timer routines, and boot mechanism using USB boot tool, so XBurst support can go into a separate new home, cpu/xburst/. Signed-off-by: Xiangfu Liu <xiangfu@openmobilefree.net> Acked-by: Daniel <zpxu@ingenic.cn> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-10-12-9/+13
|\ \ | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-ppc4xx: ppc4xx: Change DDR2 CL from 4 to 5 for intip ppc4xx: Improve lm63 pwm on dlvision-10g ppc4xx: Do not stop booting on any keypress on intip
| * | ppc4xx: Change DDR2 CL from 4 to 5 for intipDirk Eibach2011-10-12-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Some intip boards don't seem to run stable with CL4, datasheets suggest that CL5 is the safe value. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Improve lm63 pwm on dlvision-10gDirk Eibach2011-10-12-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Fan PWM lookuptable was modified to start at 46 degrees celsius instead of 40 degrees celsius. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Do not stop booting on any keypress on intipDirk Eibach2011-10-12-2/+6
| |/ | | | | | | | | | | | | | | Use CONFIG_AUTOBOOT_KEYED on intip so that booting can only be stopped with well defined keypresses. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-ubiWolfgang Denk2011-10-12-8/+10
|\ \ | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-ubi: UBI: init eba tables before wl when attaching a device ubifs bad superblock bug
| * | UBI: init eba tables before wl when attaching a deviceHolger Brunck2011-10-12-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes that u-boot gets stuck when a bitflip was detected during "ubi part <ubi_device>". If a bitflip was detected UBI tries to copy the PEB to a different place. This needs that the eba table are initialized, but this was done after the wear levelling worker detects the bitflip. So changes the initialisation of these two tasks in u-boot. This is a u-boot specific patch and not needed in the linux layer, because due to commit 1b1f9a9d00447d UBI: Ensure that "background thread" operations are really executed we schedule these tasks in place and not as in linux after the inital task which schedule this new task is finished. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ubifs bad superblock bugLars Poeschel2011-10-12-2/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue when ubifs reads a bad superblock. Later it tries to free memory, that was not allocated, which freezes u-boot. This is fixed by looking for a non null pointer before free. The message I got before u-boot freezes: UBI: max/mean erase counter: 53/32 UBIFS: mounted UBI device 0, volume 1, name "rootfs" UBIFS: mounted read-only UBIFS: file system size: 49140 bytes (50319360 KiB, 0 MiB, 49140 LEBs) UBIFS: journal size: 49 bytes (6838272 KiB, 0 MiB, 6678 LEBs) UBIFS: media format: w4/r0 (latest is w4/r0) UBIFS: default compressor: LZO UBIFS: reserved for root: 0 bytes (0 KiB) UBIFS error (pid 0): ubifs_read_node: bad node type (255 but expected 9) UBIFS error (pid 0): ubifs_read_node: bad node at LEB 330:13104 UBIFS error (pid 0): ubifs_iget: failed to read inode 1, error -22 Error reading superblock on volume 'ubi:rootfs'! Signed-off-by: Lars Poeschel <larsi@wh2.tu-dresden.de> Cc: Kyungmin Park <kmpark@infradead.org> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2011-10-12-13/+13
|\ \ | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-nand-flash: NAND: davinci: choose correct 1-bit h/w ECC reg
| * | NAND: davinci: choose correct 1-bit h/w ECC regLaurence Withers2011-10-10-13/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In nand_davinci_readecc(), select the correct NANDF<n>ECC register based on CONFIG_SYS_NAND_CS rather than hardcoding the choice of NANDF1ECC. This allows 1-bit hardware ECC to work with chip select other than CS2. Note this now matches the usage in nand_davinci_enable_hwecc(), which already had the correct handling, and allows refactoring to a single function encapsulating the register read. Without this fix, writing NAND pages to a chip not wired to CS2 would result in in the ECC calculation always returning FFFFFF for each 512-byte segment, and reading back a correctly written page (one with ECC intact) would always fail. With this fix, the ECC is written and verified correctly. Signed-off-by: Laurence Withers <lwithers@guralp.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk2011-10-12-17/+48
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-microblaze: microblaze: Copy bootfile from variables microblaze: Fix unaligned.h for endians microblaze: Initialize jumptable and console microblaze: Support flashes on lower addresses microblaze: Call common console_init_f initialization function
| * | microblaze: Copy bootfile from variablesMichal Simek2011-10-10-0/+4
| | | | | | | | | | | | | | | | | | Setup bootfile. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | microblaze: Fix unaligned.h for endiansMichal Simek2011-10-10-16/+1
| | | | | | | | | | | | | | | | | | | | | Also support little endian MB. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Mike Frysinger <vapier@gentoo.org>
| * | microblaze: Initialize jumptable and consoleMichal Simek2011-10-10-0/+6
| | | | | | | | | | | | | | | | | | This changes were done to get support for netconsole. Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | microblaze: Support flashes on lower addressesMichal Simek2011-10-10-1/+36
| | | | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | microblaze: Call common console_init_f initialization functionMichal Simek2011-10-10-0/+1
| |/ | | | | | | | | | | Calling console_init_f enables CTRL+C usage. Signed-off-by: Michal Simek <monstr@monstr.eu>
* | powerpc/mpc8536ds: Save the env variables to SDcard and SPI flashXie Xiaobo2011-10-09-4/+18
| | | | | | | | | | | | | | | | | | | | | | MPC8536DS offer booting from SDcard or SPI flash. This patch defined that u-boot can save the environment variables on SDcard or SPI flash when booting from the related device. The Env parameter region and linux kernel region have overlap in SPI-Flash, So change the Env param saving address. Signed-off-by: Xie Xiaobo <r63061@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8536ds: Add USB support for MPC8536DSFanzc2011-10-09-0/+15
| | | | | | | | | | | | | | Add EHCI controller and USB command definition. Signed-off-by: Xie Xiaobo <r63061@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | fsl_sata: Fix compile error when CONFIG_LBA48 is not definedTang Yuantian2011-10-09-5/+10
| | | | | | | | | | | | | | | | If CONFIG_LBA48 is not defined, the element lba48 of struct sata_dev_desc is not avaible, and can't be used. Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8536ds: Invert SDHC_WP pin polarityXie Xiaobo2011-10-09-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | MPC8536 Rev 1.0 silicon have NMG_eSDHC118 erratum, so that the SDHC write protected pin polarity does not follow the SD card standard in MPC8536 Rev 1.0 silicon. The MPC8536DS board invert the SDHC_WP pin as a workaround. However, this silicon erratum has been fixed in Rev 1.1, So need invert the SDHC_WP polarity again when use the MPC8536 Rev1.1 and greater on MPC8536DS board. Signed-off-by: Xie Xiaobo <r63061@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8536ds: Add eSPI support for MPC8536DSXie Xiaobo2011-10-09-4/+21
| | | | | | | | | | | | | | | | | | | | 1. The SD_DATA[4:7] signals are shared with the SPI chip selects on 8536DS, so don't set MPC85xx_PMUXCR_SD_DATA that config eSDHC data bus-width to 4-bit and enable SPI signals. 2. Add eSPI controller and SPI-FLASH definition. Signed-off-by: Xie Xiaobo <r63061@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8548cds: Update config filechenhui zhao2011-10-09-18/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | - Increase the size of malloc space. - Enable e1000 network card. - Show pci devices on startup. - Change the location of env address. - Use hwconfig to turn off ECC by default. [Kumar Gala] Fixed white space formating for CONFIG_EXTRA_ENV_SETTINGS Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc86xx: Disable translation for BAT setupBecky Bruce2011-10-09-79/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We really shouldn't be overwriting bat registers with translation enabled, especially when we're executing code using one of them for translating the current instruction stream. Instead, disable address translation while doing the final BAT setup. In order to do this, setup_bats has to move back to asm code, because we require translation to be enabled to have a stack for C code. The yucky thing about that is that the assembler doesn't like ULL so we have to switch to using HIGH/LOW pairs for physical addresses that are > 32 bits in length. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Acked-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8641hpcn: fix SRIO BAT configBecky Bruce2011-10-09-5/+0
| | | | | | | | | | | | | | | | There were duplicate (and conflicting) defines for the BATs used to cover SRIO. Drop the bogus set. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: fix null pointer dereference when init the SGMII TBI PHYTimur Tabi2011-10-09-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function dtsec_configure_serdes() needs to know where the TBI PHY registers are in order to configure SGMII for proper SerDes operation. During SGMII initialzation, fm_eth_init_mac() passing NULL for 'phyregs' when it called init_dtsec(), because it was believed that phyregs was not used. In fact, it is used by dtsec_configure_serdes() to configure the TBI PHY registers. We also need to define the PHY registers in struct fm_mdio. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/mpc8xxx: Merge entries in DDR speed tableYork Sun2011-10-09-460/+472
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not necessary to keep multiple entries for the same setting in DDR speed tables. Merge them for smaller tables. Also restructure the tables for smaller size. Cleanup some typedefs. Enforce strict checking for speed table. If DIMM is running at higher than known speed, try to use the highest speed setting. If rank is unknown, it has to panic. Removed ODT overriding for P2020DS as it is not necessary. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | phylib: Work around bug in Teranetics PHYAndy Fleming2011-10-09-1/+20
| | | | | | | | | | | | | | | | | | | | | | The Teranetics PHY does not properly report the link state for fiber connections. The new PHY code actually checked the link, and so the FM driver would refuse to talk over a linkless PHY. But the link may actually be up, so now we always report it as up for fiber connections on the tn2020. Signed-off-by: Andy Fleming <afleming@freescale.com>
* | powerpc/85xx: CONFIG_ENABLE_36BIT_PHYS does not depend on CONFIG_PHYS_64BITTimur Tabi2011-10-09-3/+3
| | | | | | | | | | | | | | | | | | | | The macro CONFIG_ENABLE_36BIT_PHYS is used to indicate that the given SOC is capable of 36-bit physical addresses, even if such large addresses are not used. On two boards, this macro was enabled only when building a 36-bit image. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/8xxx: Add support for interactive DDR programming interfaceYork Sun2011-10-09-18/+1880
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interactive DDR debugging provides a user interface to view and modify SPD, DIMM parameters, board options and DDR controller registers before DDR is initialized. With this feature, developers can fine-tune DDR for board bringup and other debugging without frequently having to reprogram the flash. To enable this feature, define CONFIG_FSL_DDR_INTERACTIVE in board header file and set an environment variable to activate it. Syntax: setenv ddr_interactive on After reset, U-boot prompts before initializing DDR controllers FSL DDR> The available commands are print print SPD and intermediate computed data reset reboot machine recompute reload SPD and options to default and recompute regs edit modify spd, parameter, or option compute recompute registers from current next_step to end next_step shows current next_step help this message go program the memory controller and continue with u-boot The first command should be "compute", which reads data from DIMM SPDs and board options, performs the calculation then stops before setting DDR controller. A user can use "print" and "edit" commands to view and modify anything. "Go" picks up from current step with any modification and compltes the calculation then enables the DDR controller to continue u-boot. "Recompute" does it over from fresh reading. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* arm920t/s3c24x0/usb_ohci.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-2/+1
| | | | | | | | | Fix: usb_ohci.c: In function 'dl_transfer_length': usb_ohci.c:768:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net>
* common/usb.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-7/+13
| | | | | | | | | | | | | | Fix: usb.c: In function 'usb_parse_config': usb.c:331:17: warning: variable 'ch' set but not used [-Wunused-but-set-variable] usb.c: In function 'usb_hub_port_connect_change': usb.c:1123:29: warning: variable 'portchange' set but not used [-Wunused-but-set-variable] usb.c: In function 'usb_hub_configure': usb.c:1183:25: warning: variable 'hubsts' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Acked-by: Remy Bohmer <linux@bohmer.net>
* drivers/usb/host/ohci-hcd.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-2/+1
| | | | | | | | | | Fix: ohci-hcd.c: In function 'dl_transfer_length': ohci-hcd.c:968:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Acked-by: Remy Bohmer <linux@bohmer.net>
* common/cmd_usb.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-2/+1
| | | | | | | | | | Fix: cmd_usb.c: In function 'usb_show_tree_graph': cmd_usb.c:284:29: warning: variable 'port' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Acked-by: Remy Bohmer <linux@bohmer.net>
* drivers/net/smc91111.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-8/+0
| | | | | | | | | Fix: smc91111.c: In function 'smc_phy_configure': smc91111.c:1194:6: warning: variable 'failed' set but not used [-Wunused-but-set-variable] smc91111.c:1190:7: warning: variable 'phyaddr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* fs/jffs2/jffs2_1pass.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-10/+4
| | | | | | | | | | Fix: jffs2_1pass.c: In function 'jffs2_1pass_read_inode': jffs2_1pass.c:699:7: warning: variable 'ret' set but not used [-Wunused-but-set-variable] jffs2_1pass.c: In function 'jffs2_1pass_build_lists': jffs2_1pass.c:1578:14: warning: variable 'empty_start' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* CFI: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-2/+11
| | | | | | | | | | | | | | | Fix: cfi_mtd.c: In function 'cfi_mtd_init': cfi_mtd.c:226:19: warning: variable 'mtd_list' set but not used [-Wunused-but-set-variable] cfi_mtd.c: In function 'cfi_mtd_init': cfi_mtd.c:225:6: warning: unused variable 'devices_found' cfi_mtd.c: In function 'cfi_mtd_init': cfi_mtd.c:226:19: warning: variable 'mtd_list' set but not used [-Wunused-but-set-variable] [-Wunused-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* arch/arm/lib/board.c: fix warning: variable ... set but not usedWolfgang Denk2011-10-09-3/+1
| | | | | | | | Fix: board.c:445:8: warning: variable 'bd' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* netconsole: support packets longer than 512 bytesMichael Walle2011-10-09-4/+7
| | | | | | | | Esp. while printing the environment the output is usually longer than 512 bytes. Instead of cutting the message, send multiple 512 bytes packets. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Mike Frysinger <vapier@gentoo.org>
* cmd_time: add time commandChe-liang Chiou2011-10-09-0/+92
| | | | | | | | | | | | | | | The 'time' command runs and reports execution time of commands. Sample usage: -------------------- u-boot# time crc 0x1000 1000 CRC32 for 00001000 ... 00001fff ==> ae94dc4b time: 0.004 seconds, 4 ticks -------------------- Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* README: fix typos and such.Wolfgang Denk2011-10-09-8/+5
| | | | | Reported-by: Michael Jones <michael.jones@matrix-vision.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
* README: fix documentation of CONFIG_SHOW_BOOT_PROGRESSWolfgang Denk2011-10-09-36/+36
| | | | | | | | Some previous changes added code right in the middle of the description of CONFIG_SHOW_BOOT_PROGRESS. Move this text down. Fix formatting while we are at it. Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit v1.1 at 2024-11-02 08:19:02 +0000