summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
| * | scsi: dm: Unbind all scsi based block devices before new scanMichal Simek2017-01-09-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New scan should unbind all block devices not to be listed again. Without this patch if scsi reset or scan is called new block devices are created which point to the same id and lun. For example: ZynqMP> scsi scan scsi_scan: if_type=2, devnum=0: sdhci@ff170000.blk, 6, 0 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 0 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 1 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 2 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 3 scsi_scan: if_type=2, devnum=0: ahci@fd0c0000.id1lun0, 2, 4 scanning bus for devices... Device 0: (1:0) Vendor: ATA Prod.: KINGSTON SVP200S Rev: 501A Type: Hard Disk Capacity: 57241.8 MB = 55.9 GB (117231408 x 512) Reported-by: Ken Ma <make@marvell.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | defconfig: am335x_evm: enable usb driver modelMugunthan V N2017-01-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | enable usb driver model for am335x bbb as musb supports driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | am335x_evm: enable usb ether gadget as it supports DM_ETHMugunthan V N2017-01-09-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | Since usb ether gadget have support for driver model, so enable usb ether gadget. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | am33xx: board: init usb ether gadget for rndis supportMugunthan V N2017-01-09-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Add usb ether gadget device with usb_ether_init() when CONFIG_DM_ETH and CONFIG_USB_ETHER are defined. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | drivers: usb: gadget: ether/rndis: convert driver to adopt device driver modelMugunthan V N2017-01-09-15/+181
| |/ | | | | | | | | | | Adopt usb ether gadget and rndis driver to adopt driver model Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* | mips: Use common _AC macro now.Tom Rini2017-01-10-3/+0
| | | | | | | | | | | | | | MIPS no longer needs to have its own version of this macro now. Fixes: 2a6713b09b8d ("move UL() macro from armv8/mmu.h into common.h") Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-01-10-196/+564
|\ \ | |/ |/|
| * sunxi: A64: enable SPLAndre Przywara2017-01-04-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the SPL is ready to be compiled in AArch64 and the DRAM init code is ready, enable SPL support for the A64 SoC and in the Pine64 defconfig. For now we keep the boot0 header in the U-Boot proper, as this allows to still use boot0 as an SPL replacement without hurting the SPL use case. We disable FEL support for now by making its compilation conditional and disabling it for ARM64, as the code isn't ready yet. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: DRAM: fix H3 DRAM size display on aarch64Andre Przywara2017-01-04-1/+1
| | | | | | | | | | | | | | | | | | | | Fix the output of the DRAM size on AArch64 SPLs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: H3/A64: fix non-ODT settingAndre Przywara2017-01-04-1/+7
| | | | | | | | | | | | | | | | | | According to Jens disabling the on-die-termination should set bit 5, not bit 1 in the respective register. Fix this. Reported-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: A64: use H3 DRAM initialization code for A64 as wellJens Kuske2017-01-04-56/+174
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The A64 DRAM controller is very similar to the H3 one, so the code can be reused with some small changes. This refactoring does not change the code size for the existing H3 part. [Andre: rework from #ifdefs to using socid parameters in static functions, minor fixes, merging in fixes from Jens] Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: clocks: Use the correct pattern register for PLL11Philipp Tomsich2017-01-04-1/+1
| | | | | | | | | | | | | | Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: H3: add DRAM controller single bit delay supportJens Kuske2017-01-04-27/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far the DRAM driver for the H3 SoC (and apparently boot0/libdram as well) only applied coarse delay line settings, with one delay value for all the data lines in each byte lane and one value for the control lines. Instead of setting the delays for whole bytes only allow setting it for each individual bit. Also add support for address/command lane delays. For the purpose of this patch the rules for the existing coarse settings were just applied to the new scheme, so the actual register writes don't change for the H3. Other SoCs will utilize this feature later properly. With a stock GCC 5.3.0 this increases the dram_sun8i_h3.o code size from 2296 to 2344 Bytes. [Andre: move delay parameters into macros to ease later sharing, use defines for numbers of delay registers, extend commit message] Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: H3: add and rename some DRAM contoller registersJens Kuske2017-01-04-36/+41
| | | | | | | | | | | | | | | | | | The IOCR registers got renamed to BDLR to match the public documentation of similar controllers. Signed-off-by: Jens Kuske <jenskuske@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: H3: Rework MBUS priority setupPhilipp Tomsich2017-01-04-24/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far the MBUS priority setup was done by writing "magic" values taken from a DRAM controller register dump after a boot0 run. By peeking at the Linux (sic!) MBUS driver [1] from the Allwinner BSP kernel, we learned more about the actual meaning of those bits. Add macros and refactor the setup function to make the MBUS setup much more readable and meaningful. The actual values used now are a transformation of the values used before, which are assembled by the new code to result in the same register writes. So this rework does not change any settings, also the code size stays the same. The respective source files in the BSP kernel had a proper GPL header, so lifting this code and information into U-Boot is legal. [Andre: provide a convenience macro to fit definitions on one line] [1] https://github.com/longsleep/linux-pine64/blob/lichee-dev-v3.10.65/drivers/bus/sunxi_mbus.c Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: provide default DRAM config for sun50i in KconfigAndre Przywara2017-01-04-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | To avoid enumerating the very same DRAM values in defconfig files for each and every Allwinner A64 board out there, let's put some sane default values in the Kconfig file. Boards with different needs can override them at any time. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: A64: do an RMR switch if started in AArch32 modeAndre Przywara2017-01-04-0/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Allwinner A64 SoC starts execution in AArch32 mode, and both the boot ROM and Allwinner's boot0 keep running in this mode. So U-Boot gets entered in 32-bit, although we want it to run in AArch64. By using a "magic" instruction, which happens to be an almost-NOP in AArch64 and a branch in AArch32, we differentiate between being entered in 64-bit or 32-bit mode. If in 64-bit mode, we proceed with the branch to reset, but in 32-bit mode we trigger an RMR write to bring the core into AArch64/EL3 and re-enter U-Boot at CONFIG_SYS_TEXT_BASE. This allows a 64-bit U-Boot to be both entered in 32 and 64-bit mode, so we can use the same start code for the SPL and the U-Boot proper. We use the existing custom header (boot0.h) functionality, but restrict the existing boot0 header reservation to the non-SPL build now. A SPL wouldn't need such header anyway. This allows to have both options defined and lets us use one for the SPL and the other for U-Boot proper. Also add arch/arm/mach-sunxi/rmr_switch.S, which contains the original ARM assembly code and instructions how to re-generate the encoded version. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: introduce extra config option for boot0 headerAndre Przywara2017-01-04-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | The ENABLE_ARM_SOC_BOOT0_HOOK option is a generic option shared with other boards. To allow alternative code to be inserted, we create another, now function specific config symbol on top of it to simplify later additions. No functional change at this time. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * ARM: boot0 hook: remove macro, include whole header fileAndre Przywara2017-01-04-23/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For prepending some board specific header area to U-Boot images we were so far including a header file with a macro definition containing the actual header specification. This works fine if there are just a few statements and if there is only one alternative. However adding more complex code quickly gets messy with this approach, so let's just drop that intermediate macro and let the #include actually insert the code directly. This converts the callers and the callees, but doesn't change anything at this point. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Steve Rae <steve.rae@raedomain.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * armv8: move reset branch into boot hookAndre Przywara2017-01-04-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | The boot0 hook we have so far is applied _after_ the initial branch to the "reset" entry point. An upcoming change requires even this branch to be changed, so we apply the hook macro at the earliest point, and have the branch in the hook file as well. This is no functional change at this point, just refactoring to simplify upcoming patches. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * armv8: add simple sdelay implementationAndre Przywara2017-01-04-0/+14
| | | | | | | | | | | | | | | | | | The sunxi DRAM setup code needs an sdelay() implementation, which wasn't defined for armv8 so far. Shamelessly copy the armv7 version and adjust it to work in AArch64. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * SPL: make struct spl_image 64-bit safeAndre Przywara2017-01-04-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since entry_point and load_addr are addresses, they should be represented as longs to cover the whole address space and to avoid warning when compiling the SPL in 64-bit. Also adjust debug prints to add the 'l' specifier, where needed. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * move UL() macro from armv8/mmu.h into common.hAndre Przywara2017-01-04-9/+12
| | | | | | | | | | | | | | | | | | | | | | The UL() macro is pretty useful in sharing constants between assembly and C files while still being able to specify a type for C. Move the macro from an armv8 specific header into a common header file to be able to use it by arm code (for instance) as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * SPL: tiny-printf: ignore "-" modifierAndre Przywara2017-01-04-0/+3
| | | | | | | | | | | | | | | | | | | | tiny-printf does not know about the "-" modifier, which aligns numbers. This is used by some SPL code, but as it's purely cosmetical, we just ignore this modifier here to avoid changing correct printf strings. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * SPL: tiny-printf: add "l" modifierAndre Przywara2017-01-04-11/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tiny-printf does not know about the "l" modifier so far, which breaks the crash dump on AArch64, because it uses %lx to print the registers. Add an easy way of handling longs correctly. Using a relatively decent compiler (GCC 5.3.0) this does _not_ increase the code size of tiny-printf.o for 32-bit builds (where long and int are actually the same), actually it looses three (ARM Thumb2) instructions from the actual SPL (numbers for orangepi_plus_defconfig): text data bss dec hex filename 758 0 0 758 2f6 spl/lib/tiny-printf.o before 18839 488 232 19559 4c67 spl/u-boot-spl before 758 0 0 758 2f6 spl/lib/tiny-printf.o after 18833 488 232 19553 4c61 spl/u-boot-spl after This adds some substantial amount of code to a 64-bit build, though: (taken after a later commit, which enables the ARM64 SPL build for sunxi) text data bss dec hex filename 1542 0 0 1542 606 spl/lib/tiny-printf.o before 25830 392 360 26582 67d6 spl/u-boot-spl before 1758 0 0 1758 6de spl/lib/tiny-printf.o after 26040 392 360 26792 68a8 spl/u-boot-spl after Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * armv8: add lowlevel_init.SAndre Przywara2017-01-04-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | For boards that call s_init() when the SPL runs, we are expected to setup an early stack before calling this C function. Implement the proper AArch64 version of this based on the ARMv7 code. This allows sunxi boards to setup the basic peripherals even with a 64-bit SPL. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * armv8: prevent using THUMBAndre Przywara2017-01-04-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The predominantely 32-bit ARM targets try to compile the SPL in Thumb mode to reduce code size. The 64-bit AArch64 instruction set does not know an alternative, concise encoding, so the Thumb build option should only be set for 32-bit targets. Likewise -marm machine options are only valid for ARMv7 targets. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sun6i: Restrict some register initialization to Allwinner A31 SoCAndre Przywara2017-01-04-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These days many Allwinner SoCs use clock_sun6i.c, although out of them only the (original sun6i) A31 has a second MBUS clock register. Also the requirement for setting up the PRCM PLL_CTLR1 register to provide the proper voltage seems to be a property of older SoCs only as well. Restrict the MBUS initialization to this SoC only to avoid writing bogus values to (undefined) registers in other chips. I can only verify that the PLL voltage setup is not needed for H3 and A64, so for now we only spare those two SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * spl: sunxi: Fix build error with CONFIG_SPL_SPI_SUNXIPriit Laes2017-01-04-1/+1
| | | | | | | | | | | | | | Fix typo introduced in ebc4ef61d76fc182773fe225151adc9b913c62eb Signed-off-by: Priit Laes <plaes@plaes.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | Prepare v2017.01Tom Rini2017-01-09-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | lib: gitignore *.elf and *.so generated by efi_loaderLadislav Michl2017-01-09-0/+2
| | | | | | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* | scripts/config_whitelist.txt: ResyncTom Rini2017-01-08-125/+0
| | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* | mx6ullevk: Add missing MAINTAINERS for mx6ull_14x14_evk_plugin_defconfigJagan Teki2017-01-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add 'Peng Fan' as MAINTAINERS of configs/mx6ull_14x14_evk_plugin_defconfig which is missing in below commit "imx: mx6ull_14x14_evk: add plugin defconfig" (sha1: b90ebf49bb8f74afe68f696f59a0e24cc79f2031) Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
* | am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASEAndrew F. Davis2017-01-08-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | The SPL load address changes based on boot type in HS devices, ISW_ENTRY_ADDR is used to set this address for AM43xx based SoCs for similar reasons. Add this same logic for AM33xx devices. Also make the default value for ISW_ENTRY_ADDR correct for GP devices based on SoC, HS devices already pick the correct value in their defconfig. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | arm: mach-omap2: Fix secure file generationAndrew F. Davis2017-01-08-19/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When TI_SECURE_DEV_PKG is not defined we warn that the file '*_HS' was not generated but generate an unsigned one anyway, first fix this warning to say that it was generated but not secured. When the user then exports TI_SECURE_DEV_PKG after getting this warning, and tries to re-build, 'make' will detect the build artifacts as unchanged and so assume they do not need to be re-generated. This causes it to fail to sign the files and it will pack unsigned files into the final image, even though TI_SECURE_DEV_PKG is now correctly defined and working. Fix this by using FORCE on the targets causes them to be re-run even if the dependent files have not changed. This then causes another issue. We currently rename the signed dtb files to overwrite the non-signed ones. We do this so the 'mkimage' tool gives the packaged dtb sections the correct name. If we do not rename the files then SPL will not find them during boot. Fix this by renaming the dtb files by appending _HS to the end of the filename, after the ".dtb", this causes them to still be named correctly in the FIT blob. Signed-off-by: Andrew F. Davis <afd@ti.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2017-01-04-33/+594
|\ \
| * | ARM: dts: tegra: Sync paz00 with Linux 4.8Misha Komarovskiy2017-01-03-29/+568
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sync with Linux 4.8 dts plus vdd_bl regulator to fix backlight start, display timings and USB controller aliases fix. Signed-off-by: Misha Komarovskiy <zombah@gmail.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Warren <twarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | colibri_t20: fix ulpi reset polarityMarcel Ziswiler2017-01-03-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix ULPI reset polarity which caused a hard hang on Colibri T20 upon attempting to start the USB subsystem: This fixes my late commit d5a24d8b53d350364bd429b7104ec369b817e4b8 (colibri_t20: fix usb operation and controller order) inadvertently having overwritten Stephen's previous commit 2f6a7e8ce5df8b99d84bfd486c6f99d92322ce04 (ARM: tegra: fix USB ULPI PHY reset signal inversion confusion). While at it also fix comment about on-module USB port. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | apalis_t30: comment about disabled pcie nodesMarcel Ziswiler2017-01-03-0/+2
| | | | | | | | | | | | | | | | | | | | | Add a comment about the disabled PCIe port nodes. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | pci: kconfig: fix spelling in descriptionMarcel Ziswiler2017-01-03-1/+1
| | | | | | | | | | | | | | | | | | | | | Fix 'driver model' rather than 'driver mode' in description. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | video: tegra: fix spelling in commentMarcel Ziswiler2017-01-03-1/+1
| | | | | | | | | | | | | | | | | | | | | Get rid of spurious 'are' in the comment. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARM: tegra: allow passing cboot DTB to the kernelStephen Warren2017-01-03-0/+18
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Some users may wish to pass the cboot-supplied DTB to the booted kernel rather than having U-Boot load the DTB itself. To allow this, expose the address of the cboot-supplied DTB in environment variable $fdt_addr. At least when using extlinux.conf, if the user doesn't explicitly specify which DTB to pass to the kernel, U-Boot passes the DTB referred to by this variable. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2017-01-04-13/+40
|\ \
| * | mtd: nand: mxs_nand_spl: Fix to remove twise 'NAND' printJagan Teki2017-01-04-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPL from nand will print 'NAND' in boot_from_devices based on the image_loader name, remove the extra 'NAND ' in mxs_nand_spl driver. Original behaviour: ------------------- U-Boot SPL 2017.01-rc2-gf84dd8b (Jan 02 2017 - 22:24:19) Trying to boot from NANDNAND : 512 MiB After the fix: ------------- U-Boot SPL 2017.01-rc2-gf84dd8b-dirty (Jan 02 2017 - 23:17:00) Trying to boot from NAND: 512 MiB Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
| * | spi: cadence_qspi_apb: Use 32 bit indirect read transaction when possibleVignesh R2017-01-04-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Section 11.15.4.9.1 Indirect Read Controller of K2G SoC TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit data interface reads until the last word of an indirect transfer So, make sure that QSPI indirect reads are 32 bit sized except for the final read. If the rxbuf is unaligned then use bounce buffer, so that readsl() can be used instead of readsb() to avoid non 32-bit accesses. [1]www.ti.com/lit/ug/spruhy8d/spruhy8d.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | spi: cadence_qspi_apb: Use 32 bit indirect write transaction when possibleVignesh R2017-01-04-6/+23
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to Section 11.15.4.9.2 Indirect Write Controller of K2G SoC TRM SPRUHY8D[1], the external master is only permitted to issue 32-bit data interface writes until the last word of an indirect transfer otherwise indirect writes is known to fails sometimes. So, make sure that QSPI indirect writes are 32 bit sized except for the last write. If the txbuf is unaligned then use bounce buffer to avoid data aborts. So, now that the driver uses bounce_buffer, enable CONFIG_BOUNCE_BUFFER for all boards that use Cadence QSPI driver. [1]www.ti.com/lit/ug/spruhy8d/spruhy8d.pdf Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | powerpc: mpc85xx: Move macro CONFIG_SYS_PPC64 to KconfigYork Sun2017-01-04-6/+11
| | | | | | | | | | | | Use Kconfig option SYS_PPC64 instead. Signed-off-by: York Sun <york.sun@nxp.com>
* | powerpc: mpc85xx: Move CONFIG_SYS_FSL_QORIQ_CHASSIS* to KconfigYork Sun2017-01-04-12/+21
| | | | | | | | | | | | Use Kconfig option to select chassis version. Signed-off-by: York Sun <york.sun@nxp.com>
* | powerpc: E6500: Move macro CONFIG_E6500 to KconfigYork Sun2017-01-04-10/+16
| | | | | | | | | | | | Use Kconfig option E6500 and clean up existing usage. Signed-off-by: York Sun <york.sun@nxp.com>
* | powerpc: mpc85xx: Remove unused ifdef in config headerYork Sun2017-01-04-19/+1
| | | | | | | | | | | | | | After most config options are moved to Kconfig, the unused ifdef or elif can be removed. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-11-20 14:25:53 +0000