summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* spl: dfu: move DFU Kconfig to SPL KconfigStefan Agner2016-11-28-33/+35
| | | | | | | | | | | | | | | | The DFU Kconfig menu entries should be part of the SPL Kconfig file. Also avoid using the top level Makefile by moving the config dependent build artifacts to the driver/ and driver/usb/gadget/ Makfiles. With that, DFU can be built again in SPL if CONFIG_SPL_DFU_SUPPORT is enabled. Fixes: 6ad6102246d8 ("usb:gadget: Disallow DFU in SPL for now") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* spl: add RAM boot device only if it is actually definedStefan Agner2016-11-28-0/+2
| | | | | | | | | | | | Some devices (e.g. dra7xx) support loading to RAM using DFU without having direct boot from RAM support. Make sure the linker list does not contain BOOT_DEVICE_RAM if CONFIG_SPL_RAM_DEVICE is not enabled. Fixes: 98136b2f26fa ("spl: Convert spl_ram_load_image() to use linker list") Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
* README: fix typo FAT_ENV_DEV_AND_PARTNicolae Rosia2016-11-28-1/+1
| | | | | | The actual define symbol is FAT_ENV_DEVICE_AND_PART Signed-off-by: Nicolae Rosia <Nicolae_Rosia@Mentor.com>
* xyz-modem: Change getc timeout loop waitingtomas.melin@vaisala.com2016-11-28-5/+5
| | | | | | | | | | | | | | | | | | This fixes the loop delay when using a hw watchdog. In case a watchdog is used that accesses CPU registers, the defined delay of 20us in a tight loop will cause a huge delay in the actual timeout seen. This is caused by the fact that udelay will inheritantly call WATCHDOG_RESET. Together with the omap wdt implementation, the seen timeout increases up to around 30s. This makes the loop very slow and causes long delays when using the modem. Instead, implement the 2 sec loop by using the timer interface to know when to break out of the timeout loop. Watchdog kicking is taken care of by getc(). Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
* sata: fix sata command can not being executed bugTang Yuantian2016-11-28-6/+11
| | | | | | | | | | | | | | | | | | | | | Commit d97dc8a0 separated the non-command code into its own file which caused variable sata_curr_device can not be set to a correct value. Before commit d97dc8a0, variable sata_curr_device can be set correctly in sata_initialize(). After commit d97dc8a0, sata_initialize() is moved out to its own file. Accordingly, variable sata_curr_device is removed from sata_initialize() too. This caused sata_curr_device never gets a chance to be set properly which prevent other commands from being executed. This patch sets variable sata_curr_device properly. Fixes: d97dc8a0 (dm: sata: Separate the non-command code into its own file) Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* tools/env: fix environment alignment tests for block devicesMax Krummenacher2016-11-28-27/+33
| | | | | | | | | | | | | | | | | | commit 183923d3e412500bdc597d1745e2fb6f7f679ec7 enforces that the environment must start at an erase block boundary. For block devices the sample fw_env.config does not mandate a erase block size for block devices. A missing setting defaults to the full env size. Depending on the environment location the alignment check now errors out for perfectly legal settings. Fix this by defaulting to the standard blocksize of 0x200 for environments stored in a block device. That keeps the fw_env.config files for block devices working even with that new check. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* tools/Makefile: suppress "which swig" error outputAndre Przywara2016-11-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Makefile in tools/ tries to find the "swig" utility by calling "which". If nothing is found in the path, some versions of which will print an error message: $ make clean which: no swig in (/usr/local/bin:/usr/bin:/bin) This does not apply to all version of "which", though: $ echo $0 bash $ type which which is aliased to `type -path' $ which foo <== this version is OK $ /usr/bin/which foo <== this one is chatty /usr/bin/which: no foo in (/usr/local/bin:/usr/bin:/bin) $ sh <== make uses /bin/sh sh-4.3$ which foo <== no alias here which: no foo in (/usr/local/bin:/usr/bin:/bin) This error message is rather pointless in our case, since we just have this very check to care for this. So add stderr redirection to suppress the message. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ti_armv7_keystone2: env: Add NFS loading support for PMMC and MONAndrew F. Davis2016-11-28-0/+3
| | | | | | | | | NFS loading support has been added to the default environment for most boot components, as PMMC and MON loading were added later they did not originally get the NFS commands added, add these now. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* keystone2: Move target selection to KconfigAndrew F. Davis2016-11-28-15/+11
| | | | | | | | | The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick a board target, but the header configs also set K2x_EVM. This config is redundant, remove it and use TARGET_K2x_EVM everywhere in its place. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* bootcounter_ram: Fix misaligned cache warningStefan Roese2016-11-28-1/+2
| | | | | | | | | | This patch fixes the warning about misaligned cache on Armada XP: CACHE: Misaligned operation at range [7ffff000, 7fffffac] Signed-off-by: Stefan Roese <sr@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* linux/compat.h: Properly implement ndelay fallbackmario.six@gdsys.cc2016-11-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Commit c68c62 ("i2c: mvtwsi: Make delay times frequency-dependent") extensively used the ndelay function with a calculated parameter which is dependant on the configured frequency of the I2C bus. If standard speed is employed, the parameter is usually 10000 (10000ns period length for 100kHz frequency). But, since the arm architecture does not implement a proper version of ndelay, the fallback default from include/linux/compat.h is used, which defines every ndelay as udelay(1). This causes problems for slower speeds on arm, since the delay time is now 9us too short for the desired frequency, which leads to random failures of the I2C interface. To remedy this, we implement a proper, parameter-aware ndelay fallback for architectures that don't implement a real ndelay function. Reported-By: Jason Brown <Jason.brown@apcon.com> To: Tom Rini <trini@konsulko.com> To: Heiko Schocher <hs@denx.de> Signed-off-by: Mario Six <mario.six@gdsys.cc>
* colibri_vf: usb gadget: toradex pid is now set genericallyMax Krummenacher2016-11-28-28/+0
| | | | | | | | remove now unused CONFIG_TRDX_PID_XXX Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
* apalis/colibri_t30: move environment locationMarcel Ziswiler2016-11-28-6/+8
| | | | | | | | | Now with the config block handling in place move the U-Boot environment location before the config block at the end of 1st "boot sector" as deployed during production using our downstream BSP. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
* apalis/colibri_imx7/pxa270/t20/t30/vf: integrate config block handlingMarcel Ziswiler2016-11-28-11/+148
| | | | | | | | With our common code in place actually make use of it across all our modules. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
* toradex: config block handlingMarcel Ziswiler2016-11-28-0/+873
| | | | | | | | | | | | | Add Toradex factory configuration block handling. The config block is a data structure which gets stored to flash during production testing. The structure holds such information as board resp. hardware revision, product ID and serial number which is used as the NIC part of the Ethernet MAC address as well. The config block will be read upon boot by the show_board_info() function, displayed as part of the board information and passed to Linux via device tree or ATAGs. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
* apalis/colibri_t20/t30: deactivate displaying board infoMarcel Ziswiler2016-11-28-0/+3
| | | | | | | | Deactivate CONFIG_DISPLAY_BOARDINFO in favour of CONFIG_DISPLAY_BOARDINFO_LATE which also displays on the LCD. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
* generic-board: make show_board_info a weak functionMarcel Ziswiler2016-11-28-1/+1
| | | | | | | | | Make show_board_info() a weak function which allows for custom board specific implementations thereof. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
* Revert "generic-board: allow showing custom board info"Marcel Ziswiler2016-11-28-1/+1
| | | | | | | | | | | | Drop CONFIG_CUSTOM_BOARDINFO as it is not Kconfig compliant and anyway not really used anywhere plus the upcoming weak show_board_info() approach seems much superior. This reverts commit a9ad18c9d5fe2554753b0f9a52adfd5ebce61147. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
* spl: remove redundant call to parse_image_header()tomas.melin@vaisala.com2016-11-28-1/+0
| | | | | | | | Image header was checked twice. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* spl: add check for FIT-header when loading imagetomas.melin@vaisala.com2016-11-28-1/+2
| | | | | | | | | | Add check for FDT_MAGIC, otherwise also legacy images will be loaded as a FIT. With this check in place, the loader works correct both with legacy and FIT images. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sun8i_emac: Fix mdio read sequencePhilipp Tomsich2016-11-28-1/+1
| | | | | | | | | | | | | | To send a parametrized command to the PHY over MDIO, we should write the data first, the trigger the execution by the command register write. Fix the access pattern in our MDIO write routine. Apparently this doesn't really matter with the Realtek PHY on the Pine64, but other PHYs (which require more setup) will choke on the wrong order. [Andre: add commit message] Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com>
* sunxi: add support for Nintendo NES Classic EditionFUKAUMI Naoki2016-11-28-0/+93
| | | | | | | | | Add board support for sun8i_r16 Nintendo NES Classic edition. Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com> [jagan: Add commit message body] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* mtd: nand: add support for the TC58NVG2S0H chipBoris Brezillon2016-11-28-0/+3
| | | | | | | | | | Add the description of the Toshiba TC58NVG2S0H SLC nand to the nand_ids table so we can use the NAND ECC infos and the ONFI timings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Mele_M5_defconfig: Drop non existing STATUSLED settingHans de Goede2016-11-28-2/+1
| | | | | | | | | And also remove it from scripts/config_whitelist.txt as the Mele_M5_defconfig was the only one defining it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Reviewed-by: Jagan Teki <jagan@openedev.com>
* sunxi: mmc: Set CONFIG_SYS_MMC_MAX_DEVICEEmmanuel Vadot2016-11-28-0/+1
| | | | | | | | | Set CONFIG_SYS_MMC_MAX_DEVICE to 4 for sunxi SoC. This define is needed in the API code. Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* arm: sunxi: do not force USB for arch-sunxiYann E. MORIN2016-11-28-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently, USB is forced-enabled for the sunxi familly, and there is no way to disable it. However, USB takes a long time to initiliase, delaying the boot by up to 5 seconds (without any USB device attached!). This is a very long delay, especially in cases where USB booting is not wanted at all, and where the device is expected to boot relatively often (even in production). Change the way the dependencies are handled, by only forcibly selecting USB when CONFIG_DISTRO_DEFAULTS ("defaults suitable for booting general purpose Linux distributions") is set. This option defaults to y for the sunxi familly, so the current default behaviour is kept unchanged. Users interested in boot time and/or size will be able to disable this to further disable USB. With USB disabled, the time spent in U-Boot before handing control to the Linux kernel is about 1s now, down from ~5s (Nanopi Neo, sunxi H3). Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans De Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Use the available Kconfig option for AHCIJelle van der Waa2016-11-28-20/+40
| | | | | | | | | Use the already available Kconfig option for AHCI. Tested on the BananaPi. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* travis: Add efi_loader grub2 testAlexander Graf2016-11-27-10/+55
| | | | | | | | We have all the building blocks now to run arbitrary efi applications in travis. The most important one out there is grub2, so let's add a simple test to verify that grub2 still comes up. Signed-off-by: Alexander Graf <agraf@suse.de>
* Travis: Remove sleep test from integratorcp_cm926ejs-qemu testAlexander Graf2016-11-27-0/+1
| | | | | | | | | | | | | | Most of the time when running the sleep test in Travis for the integratorcp_cm926ejs target I get errors like this: E assert 2.999901056289673 >= 3 The deviation is tiny, but fails the overall build result. Since the sleep test is not terribly important as gate keeper for travis tests, let's just exclude it for this board. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* efi_loader: Allow to compile helloworld.efi w/o bundling itAlexander Graf2016-11-27-5/+23
| | | | | | | | | | | | | | | | | Today we can compile a self-contained hello world efi test binary that allows us to quickly verify whether the EFI loader framwork works. We can use that binary outside of the self-contained test case though, by providing it to a to-be-tested system via tftp. This patch separates compilation of the helloworld.efi file from including it in the u-boot binary for "bootefi hello". It also modifies the efi_loader test case to enable travis to pick up the compiled file. Because we're now no longer bloating the resulting u-boot binary, we can enable compilation always, giving us good travis test coverage. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* tests: Add efi_loader hello world testAlexander Graf2016-11-26-0/+158
| | | | | | | | | | Now that we have working network tests and a hello world efi application built inside our tree, we can automatically test that efi binary running inside of U-Boot. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* travis: Add python path for environmentsAlexander Graf2016-11-26-0/+1
| | | | | | | | | When running in travis-ci, we want to pass environment configuration to the tests. These reside in a path available through PYTHONPATH, so let's define that one to point to the unit test repo. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* Travis: Expose build dir as variableAlexander Graf2016-11-26-2/+3
| | | | | | | | | | | | | Some travis QEMU tests can transfer files between the build directory and the guest U-Boot instance. For that to work, both need to have access to the same directory. This patch puts the current build path into an environment variable, so that the environment generating python scripts can extract it from there and read the respective files. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* tests: net: Offset downloads to 4MBAlexander Graf2016-11-26-2/+2
| | | | | | | | | | | | | The network test currently downloads files at 0MB offset of RAM start. This works for most ARM systems, but x86 has weird memory layout constraints on the first MB of RAM. To not get caught into any of these, let's add a 4MB pad from start of RAM to the default memory offset. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2016-11-26-90/+1133
|\
| * rockchip: configs: correct partitions 'boot' sizeJacob Chen2016-11-25-1/+1
| | | | | | | | | | | | | | It should be 112M, to make rootfs start at 0x40000 Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add support for veyron-minnie (ASUS Chromebook Flip)Simon Glass2016-11-25-1/+419
| | | | | | | | | | | | | | | | This adds support for the Asus Chromebook Flip, an RK3288-based clamshell device which can flip into 'tablet' mode. The device tree file comes from Linux v4.8. The SDRAM parameters are for 4GB Samsung LPDDR3. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Add support for veyron-mickey (Chromebit)Simon Glass2016-11-25-1/+396
| | | | | | | | | | | | | | | | This adds support for the Asus Chromebit, and RK3288-based device designed to plug directly into an HDMI monitor. The device tree file comes from Linux v4.8. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: video: Avoid using u8 in the HDMI driverSimon Glass2016-11-25-15/+15
| | | | | | | | | | | | | | | | It makes not sense using u8 to hold a value on a 32-bit or 64-bit machine. It can only bloat the code by forcing the compiler to mask the value. Change it to uint. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: veyron: Adjust ARM clock after relocationSimon Glass2016-11-25-0/+44
| | | | | | | | | | | | | | | | Update board_init() to increase the ARM clock to the maximum speed on veyron boards. This makes quite a large difference in performance. With this change, speed goes from about 750 DMIPS to 2720 DMIPs. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: clk: Support setting ACLKSimon Glass2016-11-25-0/+7
| | | | | | | | | | | | | | | | Add basic support for setting the ARM clock, since this allows us to run at maximum speed in U-Boot. Currently only a single speed is supported (1.8GHz). Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Move jerry SDRAM settings into its own .dts fileSimon Glass2016-11-25-8/+11
| | | | | | | | | | | | | | The SDRAM settings are not common across all veyron models. Move the current settings into Jerry's file. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: veyron: Add a note about the SDRAM voltageSimon Glass2016-11-25-0/+6
| | | | | | | | | | | | | | Add a comment to indicate that we are not supporting the PWM regulator yet. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Rename jerry files to veyronSimon Glass2016-11-25-8/+8
| | | | | | | | | | | | | | | | | | | | | | At present we have a single rk3288-based Chromebook: chromebook_jerry. But all such Chromebooks can use the same binary with only device-tree differences. The family name is 'veyron', so rename the files accordingly. Also update the device-tree filename since this currently differs from Linux. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: Move jerry to use of-platdataSimon Glass2016-11-25-4/+4
| | | | | | | | | | | | | | Adjust jerry to use of-platdata like other rk3288 boards. This reduces the SPL size enough that it boots again. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: video: Check for device in useSimon Glass2016-11-25-5/+11
| | | | | | | | | | | | | | | | | | | | Check whether a display device is in use before using it. Add a comment as to why two displays cannot currently be used at the same time. This allows us to remove the device-tree change that disables vopb on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
| * video: Track whether a display is in useSimon Glass2016-11-25-1/+27
| | | | | | | | | | | | | | Mark a display as in use when display_enable() is called. This can avoid a display being used by multiple video-output devices. Signed-off-by: Simon Glass <sjg@chromium.org>
| * video: Use cache-alignment in video_sync()Simon Glass2016-11-25-1/+2
| | | | | | | | | | | | | | | | Sometimes the frame buffer is not a multiple of the cache line size. Adjust the cache-flushing code to avoid cache warnings/errors in this case. Signed-off-by: Simon Glass <sjg@chromium.org>
| * spi: Add a debug() on bind failureSimon Glass2016-11-25-1/+4
| | | | | | | | | | | | | | This is an uncommon error but we may as well have a debug() message when it happens. Signed-off-by: Simon Glass <sjg@chromium.org>
| * rockchip: spi: Honour the deactivation delaySimon Glass2016-11-25-0/+8
| | | | | | | | | | | | | | This is not currently implemented. Add support for this so that the Chrome OS EC can be used on jerry. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-09 20:15:39 +0000