summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sunxi: musb: Check Vbus-det before enabling otg port powerHans de Goede2015-02-21-0/+42
| | | | | | | | | | | | Sending out 5V when there is a charger connected to the otg port is not a good idea, so check for this and error out. Note this commit currently breaks otg support on the q8h tablets, as we need to do some magic with the pmic there to get vbus info, this is deliberate (better safe then sorry), fixing this is on my TODO list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: Add support for the UTOO P66 tabletHans de Goede2015-02-21-0/+21
| | | | | | | | The UTOO P66 is a 6" A13 tablet / lcd ereader. It features a 6" 480x800 ips lcd screen, 512MB RAM & 4GB emmc. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: mmc: Always declare High Capacity capabilityHans de Goede2015-02-21-5/+1
| | | | | | | | | High Capacity (e)MMC cards work fine on sun4i / sun5i, and not having this capability set causes u-boot to not recognize the eMMC on an Utoo P66 A13 tablet, so always set it thereby fixing this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Add support for tl059wv5c0 lcd panelsHans de Goede2015-02-20-0/+15
| | | | | | | | Add support for the 6" 480x800 tl059wv5c0 panel used on e.g. Utoo P66 and Aigo M60/M608/M606 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Add support for LCD panels which need to be configured via i2cHans de Goede2015-02-20-0/+50
| | | | | | | | This commits adds support for configuring a a bitbang i2c controller, which is used on some boards to configure the LCD panel (via i2c). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* sunxi: video: Add support for LCD reset pinHans de Goede2015-02-20-1/+18
| | | | | | | On some boards there is a gpio to reset the LCD panel, add support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Merge branch 'master' of git://git.denx.de/u-boot-fdtTom Rini2015-02-18-8/+8
|\
| * cmd_fdt: Print the control fdt in terms of virtual memoryJoe Hershberger2015-02-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | If you want to inspect the control device tree using the fdt command, the "fdt address -c" command previously unhelpfully printed the phys memory address of the device tree. That address could not then be used to set the fdt address for inspection. Changed the resulting print to one that can be copied directly to the 'fdt address <addr>' command. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
| * cmd_fdt: Actually fix fdt command in sandboxJoe Hershberger2015-02-17-7/+7
| | | | | | | | | | | | | | | | | | | | | | Commit 90bac29a76bc8d649b41a55f2786c0abef9bb2c1 claims to fix this bug that was introduced in commit a92fd6577ea17751ead9b50243e3c562125cf581 but doesn't actually make the change that the commit message describes. Actually fix the bug this time. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-avr32Tom Rini2015-02-17-307/+294
|\ \
| * | atstk1002: enable generic boardAndreas Bießmann2015-02-17-0/+4
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | grasshopper: enable generic boardAndreas Bießmann2015-02-17-0/+4
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: add generic board supportAndreas Bießmann2015-02-17-6/+37
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | common/board_r: allocate bootparamsAndreas Bießmann2015-02-17-0/+15
| | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | common/board_f: factor out reserve_stacksAndreas Bießmann2015-02-17-35/+102
| | | | | | | | | | | | | | | | | | | | | | | | Introduce arch_reserve_stacks() to tailor gd->start_addr_sp and gd->irq_sp to the architecture needs. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | avr32: use generic gd->start_addr_spAndreas Bießmann2015-02-17-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | Before avr32 had an extra storage for stack end to have a nice stack printout on exception. Remove this extra storage and use generic gd->start_addr_sp instead. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: convert to dram_init()Andreas Bießmann2015-02-17-136/+46
| | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | avr32: rename mmu.h definitionsAndreas Bießmann2015-02-17-55/+55
| | | | | | | | | | | | | | | | | | | | | Prefix mmu.h PAGE_xxx definitions with MMU_ in order to prevent a naming conflict with other definitions. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: factor out cpu_mmc_init()Andreas Bießmann2015-02-17-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | cpu_mmc_init() is required by the init sequence to have a working MMC interface on avr32. This will not be included in the binary if we omit the avr32 board.c when building the generic board. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | avr32: rename cpu_init() -> arch_cpu_init()Andreas Bießmann2015-02-17-2/+4
| | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | avr32: use dlmalloc for DMA buffersAndreas Bießmann2015-02-17-60/+6
| |/ | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | Prepare v2015.04-rc2Tom Rini2015-02-17-1/+1
| | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
* | Revert "sunxi: configs/sunxi-common.h: Enable CONFIG_CMD_PART"Tom Rini2015-02-17-3/+0
| | | | | | | | | | | | | | This reverts commit bd2a4888b123713adec271d6c8040ca9f609aa2f which was an older version of af21f2f which is what we actually want in. Signed-off-by: Tom Rini <trini@ti.com>
* | add example for file on VFAT filesystem usageWaldemar Brodkorb2015-02-17-0/+3
| | | | | | | | | | | | | | | | For example on a raspberry pi the u-boot environment can be saved in a file on the first VFAT partition. This example illustrates how to use it with fw_printenv/fw_setenv. Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
* | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-02-17-155/+247
|\ \
| * | sunxi: Support the FEL boot mode in the regular u-boot buildSiarhei Siamashka2015-02-16-10/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So that the CONFIG_SPL_FEL option is not needed anymore. And the regular SPL binary, generated by the default u-boot build, is now also bootable over USB in the FEL mode. The SPL still can boot from the SD card too. A bunch of system registers need to be saved/restored in order to ensure that the IRQ handler still works in the BROM FEL code after getting control back from the SPL. This is done in the sunxi code instead of abusing ifdefs in 'start.S'. The decision whether to load the main u-boot binary from the SD card or return to the FEL code in the BROM is done at runtime. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [hdegoede@redhat.com: Since we now restore various regs before returning to the FEL BROM code we can drop the sunxi specific #ifdefs in start.S] Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Normalise FEL supportSimon Glass2015-02-16-94/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of creating its own. There are some #ifdefs required in start.S. Future work will hopefully remove these. This series is available at u-boot-dm, branch sunxi-working. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | arm: spl: Provide for a board-specific loaderSimon Glass2015-02-16-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some boards have a special way of loading U-Boot that does not fit with the existing SPL code. For example sunxi uses an 'FEL' mode where U-Boot is loaded over USB. Add a CONFIG option and boot mode for this. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | arm: Allow lr to be saved by board codeSimon Glass2015-02-16-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The link register value can be required on some boards (e.g. FEL mode on sunxi) so use a branch instruction to jump to save_boot_params() instead of a branch link. This requires a branch back to save_boot_params_ret so adjust the users to deal with this. For exynos just drop the function since it doesn't do anything. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | tools: mksunxiboot: Fix problems on big endian systemsSiarhei Siamashka2015-02-16-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | Now my PS3 can be also used to build u-boot for sunxi devices. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: otg: Fix peripheral modeHans de Goede2015-02-16-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | Peripheral mode needs us to signal vusb high to the phy for it to work, just like the host mode does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: dram: Un-inline dram helper functionsHans de Goede2015-02-16-26/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move the dram helper functions to a separate C file, rather then having them as inline helpers in dram.h. This saves 144 bytes in the .text segment for sun6i builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | sunxi: video: Dynamically reserve framebuffer memoryHans de Goede2015-02-16-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only use CONFIG_SUNXI_MAX_FB_SIZE to reserve memory at the top when relocating u-boot, and calculate the actual amount of memory necessary when setting up the video-mode and use only that, freeing up some additional memory for use by the kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: video: Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebufferHans de Goede2015-02-16-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not use CONFIG_SYS_MEM_TOP_HIDE for the framebuffer, instead override board_get_usable_ram_top to make sure that u-boot is not relocated into the area where we want to use the framebuffer, and patch the devicetree from sunxi_simplefb_setup() to tell the kernel to not touch the framebuffer. This makes u-boot properly see the framebuffer as dram, and initalize the level 2 cache for it, fixing the very slow cfb scrolling problem. As an added bonus this stops us from reserving the framebuffer when simplefb is not used because an older kernel is booted, or hdp is used and no hdmi cable was plugged in, freeing up the memory for kernel use in these cases. Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | sunxi: MAINTAINERS: drop no longer existing felconfig-s from MAINTAINERSHans de Goede2015-02-16-2/+0
| | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: Ampe A76 supportPaul Kocialkowski2015-02-16-0/+20
| | | | | | | | | | | | | | | | | | Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* | | ARM: lpc3250: config: add generic board supportVladimir Zapolskiy2015-02-16-1/+3
| | | | | | | | | | | | | | | | | | | | | The only LPC3250 board works fine with enabled generic board support, add CONFIG_SYS_GENERIC_BOARD right into the arch config header. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* | | KM/IVM: remove ivm_read_eeprom(void)Valentin Longchamp2015-02-16-26/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is not used anymore since the procedure was split into a simple read function and a later alaysis. The ivm_read_eeprom name is now used for the previous ivm_simple_read_eeprom function. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | | 82xx/km82xx: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | | 83xx/km83xx: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | | 85xx/kmp204x: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | | kirkwood/km_arm: read the IVM eeprom earlierValentin Longchamp2015-02-16-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows to define the ethaddr env variable according to the the IVM content by reading the IVM in misc_init_r. Later, when HUSH is available the content read earlier is analyzed to populate some non env variables. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | | KM/IVM: split the IVM reading and parsing in 2 partsValentin Longchamp2015-02-16-25/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows to first read the IVM content (earlier in the boot sequence) and define the ethaddr env variable thanks to the ivm_read_eepromi(). Later, the IVM content can be parsed and used to define some hush variables, when the hush subsystem is available thanks to ivm_analyze_eeprom(). To avoid the HW read to happen twice, the buffer passed to ivm_read_eeprom() has to be reused by ivm_analyze_eeprom (and thus allocated before calling ivm_read_eeprom()). Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
* | | spl, spl_nor: fix compiler warningHeiko Schocher2015-02-16-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | executing "tools/buildman/buildman mpc5xx" drops this warning: common/spl/spl_nor.c: In function 'spl_nor_load_image': common/spl/spl_nor.c:26:10: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] fix this. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | .travis.yml: remove 824x buildsHeiko Schocher2015-02-16-3/+0
| | | | | | | | | | | | | | | | | | | | | remove powerpc 824x build, as this architecture not longer exists. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | PCI: add 64-bit prefetchable memory supportDavid Feng2015-02-16-1/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI specification allow prefetchable memory to be 32-bit or 64-bit. PCI express specification states that all memmory bars for prefetchable memory must be implemented as 64-bit. They all require that 64 bit prefetchble memory are suported especially when u-boot is ported to more and more 64bit processors. Signed-off-by: David Feng <fenghua@phytium.com.cn> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | config_distro_bootcmd.h: Enable CONFIG_CMD_PARTHans de Goede2015-02-16-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be defined, as the default bootcmd now uses the "part" command. This fixes sunxi boards not booting with v2015.04-rc1. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* | | image: Convert to use fdt_for_each_subnode macroAxel Lin2015-02-16-15/+5
| | | | | | | | | | | | | | | | | | | | | Use fdt_for_each_subnode macro to simplify the code a bit. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Simon Glass <sjg@chromium.org>
* | | tools/imagetool: remove linker scriptAndreas Bießmann2015-02-16-55/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit a93648d197df48fa46dd55f925ff70468bd81c71 introduced linker generated lists for imagetool which is the base for some host tools (mkimage, dumpimage, et al.). Unfortunately some host tool chains do not support the used type of linker scripts. Therefore this commit broke these host-tools for them, namely FreeBSD and Darwin (OS/X). This commit tries to fix this. In order to have a clean distinction between host and embedded code space we need to introduce our own linker generated list instead of re-using the available linker_lists.h provided functionality. So we copy the implementation used in linux kernel script/mod/file2alias.c which has the very same problem (cause it is a host tool). This code also comes with an abstraction for Mach-O binary format used in Darwin systems. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Guilherme Maciel Ferreira <guilherme.maciel.ferreira@gmail.com>
* | | net: keystone_net: move serdes setup to initialization functionVitaly Andrianov2015-02-16-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Keystone2 devices serdes must be initialized before accessing MDIO bus. This commit moves the keystone2_net_serdes_setup() from keystone2_eth_open to keystone2_emac_initialize to meet that requirement. This also eliminates unnecessary serdes initializatin every time when the keystone2_eth_open is being called. Signed-off-by: Vitaly Andrianov <vitalya@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Tested-by: Nishanth Menon <nm@ti.com>
generated by cgit v1.1 at 2024-11-06 12:43:14 +0000