summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
| | * k2hk_evm: add script to automate NAND flash processKhoronzhuk, Ivan2014-07-25-2/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add script to automate NAND flash process. As for now the board has two burn scripts - burn to boot from SPI NOR flash and burn to boot from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi. Also update README to contain NAND burn U-boot process description. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
| | * keystone: add support for NAND gpheader imageKhoronzhuk, Ivan2014-07-25-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for NAND gpheader image. TI Keystone2 ROM bootloader expects 8 bytes of trailing zeroes in the nand u-boot image. So add zeros at the end of the nand gph image. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * mtd: nand: davinci: add opportunity to write keystone U-boot imageKhoronzhuk, Ivan2014-07-25-1/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Keystone SoCs use the same NAND driver as Davinci. This patch adds opportunity to write Keystone U-boot image to NAND device using appropriate RBL ECC layout. This is needed only if RBL boots U-boot from NAND device and that's supposed that raw u-boot partition is used only for writing image. The main problem is that default Davinci ECC layout is different from Keystone RBL layout. To read U-boot image the RBL needs that image was written using RBL ECC layout. The BBT table is written using default Davinci layout and has to be updated using one. The BBT can be updated only while erasing chip or by forced bad block assigning, so erase function has to use native ecc layout in order to be able to write BBT correctly. So if we're writing to NAND U-boot address we use RBL layout for others we use default ECC layout. Also remove definition for CONFIG_CMD_NAND_ECCLAYOUT as there is no reasons to use ECC layout commands. It was added by mistake. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * tps65218/am43xx_evm: Add power framework support to TPS65218Tom Rini2014-07-25-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | Add in an init function for the drivers/power framework so we can dump and read the registers via i2c. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
| | * power/pmic.h: Add prototype for power_init_board.Tom Rini2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | As this is a weak function that we may override, provide a prototype for it. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
| | * ARM: dra7_evm: Add Ethernet support for dra72x platformMugunthan V N2014-07-25-1/+6
| | | | | | | | | | | | | | | | | | Set the active_slave to 1 as slave 1 is pinned out in dra72x base board Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
| | * ARM: DRA7xx: Add cpsw second port pinmuxMugunthan V N2014-07-25-0/+12
| | | | | | | | | | | | | | | | | | Add cpsw second slave port pinmux to use it as primary ethernet port Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
| | * drivers: net: cpsw: add support for using second port as ethernetMugunthan V N2014-07-25-3/+6
| | | | | | | | | | | | | | | | | | | | | Add support for using the second slave port of cpsw to be used as primary ethernet. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
| * | Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-7/+3026
| |\ \
| | * | arm: rmobile: Add support Alt boardNobuhiro Iwamatsu2014-07-24-0/+1305
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The alt board has R8A7794, 1GB DDR3-SDRAM, USB, Ethernet, QSPI, MMC, SDHI and more. This commit supports the following functions: - DDR3-SDRAM - SCIF - I2C - Ethernet - QSPI Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | arm: rmobile: Add support R8A7794Nobuhiro Iwamatsu2014-07-24-2/+1712
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Renesas R8A7794 is CPU with Cortex-A15. This supports the basic register definition and GPIO and framework of PFC. Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | serial: sh: Add support R8A7794Nobuhiro Iwamatsu2014-07-24-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | This adds the preset value to register for R8A7794. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| | * | net: sh-eth: Add support R8A7794Nobuhiro Iwamatsu2014-07-24-4/+7
| | |/ | | | | | | | | | | | | | | | | | | R8A7794 has the same sh-ether IP core as other SH/rmobile. This patch adds support of R8A7794. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-264/+1010
| |\ \
| | * | sunxi: use setbits_le32 to enable the DMA clockIan Campbell2014-07-18-2/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
| | * | sunxi: add gpio driverIan Campbell2014-07-18-0/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables CONFIG_CMD_GPIO for the Allwinner (sunxi) platform as well as providing the common gpio API (gpio_request/free, direction in/out, get/set etc). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Henrik Nordström <henrik@henriknordstrom.net> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| | * | sunxi: add Cubieboard2 supportIan Campbell2014-07-18-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a sun7i (A20) based followup to the sun4i (A10) Cubieboard. It has GMAC using MII mode. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com>
| | * | sunxi: use random parts of SID to set ethaddrJonathan Liu2014-07-18-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to the USB NIC found on OMAP5uEVM, PandaBoard and BeagleBoard-XM boards, the sunxi SoCs have a NIC onboard without an embedded MAC address. Just like the omap used on these boards, the sunxi SoCs do have a unique chip id, in the form of the 128 bit SID register: http://linux-sunxi.org/SID_Register_Guide So mimick the BeagleBoard-XM board code (commit 548a64d8) and use the chip id to generate a unique fixed MAC address. We check for the SID not being all 0, since some early A20 batches shipped without having there SID programmed. Note we use specific parts of the 128 bits, since some parts indicate the SoC family / revision, and thus are fixed. The algorithm for this was taken from the linux-sunxi.org kernels. Signed-off-by: Jonathan Liu <net147@gmail.com> [hdegoede@redhat.com: Expanded the commit message with some more info] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Fix reset hang on sun5iHans de Goede2014-07-18-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do the same as the Linux kernel does, this fixes the SoC hanging on reset about 50% of the time. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add axp152 pmic supportHans de Goede2014-07-18-1/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the x-powers axp152 pmic which is found on most A10s boards and enable it for the r7-tv-dongle board. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add axp209 pmic supportHenrik Nordstrom2014-07-18-3/+215
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the x-powers axp209 pmic which is found on most A10, A13 and A20 boards. And enable AXP209 support for the Cubietruck and Cubieboard boards. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add i2c supportHans de Goede2014-07-18-0/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the i2c controller found on all Allwinner sunxi SoCs, this is the same controller as found on the Marvell orion5x and kirkwood SoC families, with a slightly different register layout, so this patch uses the existing mvtwsi code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-By: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Heiko Schocher <hs@denx.de> [ ijc -- updated u-boot-spl-fel.lds ]
| | * | mvtwsi: convert to CONFIG_SYS_I2C frameworkHans de Goede2014-07-16-41/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note this has only been tested on Allwinner sunxi devices (support for which gets introduced by a later patch). The kirkwood changes have been compile tested using the wireless_space board config, the orion5x changes have been compile tested using the edminiv2 board config. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heiko Schocher <hs@denx.de>
| | * | sunxi: Avoid unused variable warning.Ian Campbell2014-07-08-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark rc as __maybe_unused since it is infact unused on systems with neither EMAC nor GMAC. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Tom Rini <trini@ti.com>
| | * | sunxi: Add Ian Campbell and Hans de Goede as cubietruck board-maintainersHans de Goede2014-07-06-2/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add support for using MII phy-s with the GMAC nicChen-Yu Tsai2014-07-06-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many A20 boards (ie Cubieboard2, A20-OLinuXino_MICRO) use an 100 Mbit MII phy together with the GMAC nic found in the A20 SoC, add support for this (this will get used when we add these boards in a later patch). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add emac glue, enable emac on the cubieboardHans de Goede2014-07-06-1/+14
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | net: Rename and cleanup sunxi (Allwinner) emac driverStefan Roese2014-07-06-74/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been 3 versions of the sunxi_emac support patch during its development. Somehow version 2 ended up in upstream u-boot where as the u-boot-sunxi git repo got version 3. This bumps the version in upstream u-boot to version 3 of the patch: - Initialize MII clock earlier so mii access to allow independent use - Name change from WEMAC to EMAC to match mainline kernel & chip manual - Cosmetic code cleanup Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add sun5i supportHans de Goede2014-07-06-0/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Allwinner A13 and A10s SoCs also know as the Allwinner sun5i family, and the A13-OLinuXinoM A13 based and r7-tv-dongle A10s based boards. The only differences compared to the already supported sun4i and sun7i families are all in the DRAM controller initialization: -Different hcpr values -Different MBUS settings -Some other small initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add sun4i supportHans de Goede2014-07-06-3/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Allwinner A10 SoC also known as the Allwinner sun4i family, and add the Cubieboard board which uses the A10 SoC. Compared to sun7 only the DRAM controller is a bit different: -Controller reset bits are inverted, but only for Rev. A -Different hpcr values -No MBUS on sun4i -Various other initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Implement reset_cpuHans de Goede2014-07-06-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no way to reset the cpu, so use the watchdog for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Remove mmc DMA supportHans de Goede2014-07-06-135/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA code in sunxi_mmc.c is broken. mmc_trans_data_by_dma() allocates the dma descriptors on the stack, and then exits while the dma transfer is in progress, so the dma engine is reading stack memory which at that point may be re-used. So far we've gotten away with this by luck, but recent u-boot changes have shifted the stack start address by 16 bytes, which combined with dma alignment now exposes this problem. Since we end up just busy waiting for the dma engine anyway, this commit fixes things by simply removing the dma code, resulting in smaller bug-free code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Fix u-boot-spl.lds to refer to .vectorsHans de Goede2014-07-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adjust the u-boot-spl.lds linker script to match the changes made in the 41623c91b09a0c865fab41acdaff30f060f29ad6 "arm: move exception handling out of start.S files" commit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: mksunxiboot: Fix loading of files with a size which is not a multiple ↵Hans de Goede2014-07-06-6/+4
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of 4 We should not be aligning the amount of bytes which we try to read from the disk, this leads to trying to read more bytes then there are which fails. file_size is already aligned to BLOCK_SIZE before being stored in img.header.length, so there is no need for load_size at all. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'Albert ARIBAUD2014-07-26-2/+7
| |\ \
| | * | zynq: disable -Wstrict-prototypes option for ps7_init.cMasahiro Yamada2014-07-23-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The files ps7_init.c and ps7_init.h are supposed to be generated by hw projects such as Vivado, PlanAhead and then to be copied into board/xilinx/zynq directory. But some prototypes in them cause annoying warning messages: CC spl/board/xilinx/zynq/ps7_init.o In file included from board/xilinx/zynq/ps7_init.c:50:0: board/xilinx/zynq/ps7_init.h:137:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.h:138:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.h:139:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.h:145:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12602:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12723:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12742:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12761:1: warning: function declaration isn't a prototype [-Wstrict-prototypes] board/xilinx/zynq/ps7_init.c:12854:6: warning: function declaration isn't a prototype [-Wstrict-prototypes] The prototypes should be int ps7_init(void); int ps7_post_config(void); int ps7_debug(void); rather than int ps7_init(); int ps7_post_config(); int ps7_debug(); We do not want to be bothered because of automatically generated files. But we cannot touch the external projects for now. What we can do is to disable -Wstrict-prototypes for ps7_init.c Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Michal Simek <michal.simek@xilinx.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| | * | ARM: zynq: Show ECC status on the same line as DRAM sizeMichal Simek2014-07-23-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch is DRAM size one line below DRAM: which is not nice Origin: I2C: ready DRAM: Memory: ECC disabled 1 GiB MMC: zynq_sdhci: 0 Fixed by this patch: I2C: ready DRAM: ECC disabled 1 GiB MMC: zynq_sdhci: 0 Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| | * | ARM: zynq: Enable generic board for Xilinx ZynqMichal Simek2014-07-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable CONFIG_SYS_GENERIC_BOARD for all Zynq boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on ZC706 board]
* | | | Merge git://www.denx.de/git/u-boot-ppc4xxTom Rini2014-07-28-2/+12
|\ \ \ \
| * | | | board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boardsDirk Eibach2014-07-25-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the generic board infrastructure to all gdsys boards. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | ppc: Make ppc4xx ready for CONFIG_SYS_GENERIC_BOARDDirk Eibach2014-07-25-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic board infrastructure assumes that gd is set by arch code. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-07-28-1133/+481
|\ \ \ \ \
| * | | | | board/freescale: use generic board architecture for t2080qds and t2080rdbShengzhou Liu2014-07-23-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested with NOR boot and NAND boot on T2080QDS and T2080RDB. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
| * | | | | powerpc/t1040: update i2c for t1040qds and t104xrdbShengzhou Liu2014-07-22-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fix base address of I2C2 as 0x118100 instead of 0x119000. - Add definitions for I2C3 & I2C4. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | mpc85xx/t104x: Enable L2 and CPC cache when resumeTang Yuantian2014-07-22-76/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When resume from deep sleep, uboot needs to enable L2 and CPC cache, or they would be keeping unusable in kernel because kernel didn't enble or initialized them. This patch didn't change the existing L2 cache enabling code, just put them in a function. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | powerpc/chassis2: Configure and enable L2 cache for PPC clusters onlyShaveta Leekha2014-07-22-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | powerpc/t4240qds: fix offset of serdes when checking reference clockShaohui Xie2014-07-22-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T4240 has 4 serdes, each serdes has 4k memory space, two PLLs. We use PLL1CR0 to check the serdes reference clock. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | driver/ddr: Fix DDR register timing_cfg_8York Sun2014-07-22-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The field wrtord_bg should add 2 clocks if on the fly chop is enabled, according to DDR controller manual for DDR4. Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | | powerpc/ifc: fix invalid CSn FTIM2.TCH settingShaohui Xie2014-07-22-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some platforms, CSn FTIM2.TCH is set to zero which is invalid, an invalid hold time makes DUT timing variances, whether it works or not on luck. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | | powerpc/mpc85xx: Check return value of find_tlb_idxYork Sun2014-07-22-67/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | find_tlb_idx() is called in board_early_init_r() on multiple boards. The return value is not checked before being used to disable a TLB. In normal case the return value wouldn't be -1. In case of a mis- configuration during porting to a new board, checking the return value may be helpful to reveal some user errors. Signed-off-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-09 19:27:54 +0000