summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
...
| | * mx23evk: Add initial board supportOtavio Salvador2013-01-28-0/+441
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx23_olinuxino: Add default environmentOtavio Salvador2013-01-28-7/+70
| | | | | | | | | | | | | | | | | | This adds a default environment with support for MMC booting. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| | * mxs: mmc: mx23_olinuxino: Add MMC supportMarek Vasut2013-01-28-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the MMC attached to SSP1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: mmc: Fix the MMC driver for MX23Marek Vasut2013-01-28-5/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX23 has different layout of DMA channels. Fix the MMC driver to support MX23. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: mmc: Allow overriding default card detect implementationMarek Vasut2013-01-28-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some MXS based boards do not implement the card-detect signal. Allow user to specify alternate card-detect implementation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: mmc: Fix MMC reset on iMX23Otavio Salvador2013-01-28-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This does the same reset mask as done in v3.7 Linux kernel code. The block is properly configured for MMC operation that way. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: ssp: Add SSP registers map for MX23Marek Vasut2013-01-28-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX23 SSP register layout differs from MX28 in certain bits, adjust the register layout accordingly. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: dma: Fix APBH DMA driver for MX23Marek Vasut2013-01-28-2/+129
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX23 has less channels for the APBH DMA, sligtly different register layout and some bits in those registers are placed differently. Reflect this in the driver. This patch fixes MMC/DMA issue on MX23. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mx6qsabrelite: search mii phy address 4-7Troy Kisky2013-01-28-3/+21
| | | | | | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * net: fec_mxc: get phydev before fec_probeTroy Kisky2013-01-28-43/+83
| | | | | | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * net: fec_mxc: only call phy_connect in fec_probeTroy Kisky2013-01-28-21/+12
| | | | | | | | | | | | | | | | | | | | | This allows us to create the phydev before calling fec_probe in later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * net: fec_mxc: use fec_set_dev_name to set nameTroy Kisky2013-01-28-8/+8
| | | | | | | | | | | | | | | | | | | | | This allows us to create the phydev before calling fec_probe in later patch. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * phy: add phy_find_by_mask/phy_connect_devTroy Kisky2013-01-28-50/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is useful to be able to try a range of possible phy addresses to connect. Also, an ethernet device is not required to use phy_find_by_mask leading to better separation of mii vs ethernet, as suggested by Andy Fleming. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * net: fec_mxc: have fecmxc_initialize call fecmxc_initialize_multiTroy Kisky2013-01-28-16/+8
| | | | | | | | | | | | | | | | | | | | | Having only one call to fec_probe will ease the changing of its parameters. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * net: fec_mxc: change fec_mii_setspeed parameterTroy Kisky2013-01-28-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Only the hardware ethernet registers are needed for this function, so don't pass the more general structure. I'm trying to separate MII and fec. This also fixes MX28 fec_mii_setspeed use on secondary ethernet port This was found by inspection of the code and should be checked on real hardware. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * net: fec_mxc: delete CONFIG_FEC_MXC_MULTITroy Kisky2013-01-28-4/+1
| | | | | | | | | | | | | | | | | | | | | It is more logical to test for CONFIG_FEC_MXC_PHYADDR to determine whether to define the function fecmxc_initialize. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * doc/README.fec_mxc: add documentationTroy Kisky2013-01-28-0/+27
| | | | | | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * mxs: Use __weak annotation to simplify codeFabio Estevam2013-01-28-7/+4
| | | | | | | | | | | | | | | | | | | | | Using the __weak annotation can make the code cleaner. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Marek Vasut <marex@denx.de>
| | * tools: imximage: Let .name field be more genericFabio Estevam2013-01-28-1/+1
| | | | | | | | | | | | | | | | | | | | | Since this structure is not i.MX5x specific, remove the '5x' to make it more generic. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6qsabre_common: Let mmc partition be board specificFabio Estevam2013-01-28-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 49ea0ff5 (49ea0ff5) introduced CONFIG_SYS_MMC_ENV_PART into mx6qsabresd.h to store the mmc partition, but in order for it to have effect we should place it into 'mmcpart' variable. Also add CONFIG_SYS_MMC_ENV_PART into mx6qsabreauto.h. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6qsabreauto: enable USB host interfaceKnut Wohlrab2013-01-28-0/+11
| | | | | | | | | | | | | | | | | | The USB host interface is routed to plug USB1/J30 on the mother board. Signed-off-by: Knut Wohlrab <knut.wohlrab@de.bosch.com>
| | * mxs: Boost the memory power supplyMarek Vasut2013-01-28-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory power supply on MX23 didn't pump out enough juice into the DRAM chip, thus caused occasional memory corruption. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| | * imximage.cfg: run files through C preprocessorTroy Kisky2013-01-22-703/+791
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| | * mxs: Add MX23 quirks into the clock codeOtavio Salvador2013-01-21-11/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX23 has different handling of the SSP clock and GPMI NAND clock sources, add necessary quirks into the clock code to properly handle these. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * woodburn: Set Write Protection GPIO as inputFabio Estevam2013-01-21-1/+2
| | | | | | | | | | | | | | | | | | Set Write Protection GPIO as input. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mxs: Add MX23 olinuxino board supportMarek Vasut2013-01-21-0/+325
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for MX23-based Olinuxino board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: Linux uses ttyAMA0 as DUARTMarek Vasut2013-01-21-1/+1
| | | | | | | | | | | | | | | | | | | | | Replace use of ttyAM0 with ttyAMA0 as default serial console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: Fix the memory init for MX23Otavio Salvador2013-01-21-15/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory init is slightly different on MX23, thus split the memory init for mx23 and mx28 into different functions. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: Add function to ungate the power block on MX23Marek Vasut2013-01-21-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The power block on MX23 must first be ungated before it can be operated. Add function to MXS power init that ungates it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * mmc: Limit the number of used SSP ports on MX23Marek Vasut2013-01-21-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MX23 can only use two SSP ports. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: config: Enable mxsboot tool for i.MX23 based boardsOtavio Salvador2013-01-21-0/+2
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: config: Enable building of u-boot.sb binaryOtavio Salvador2013-01-21-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | For i.MX23 we need to pass imx23 as elftosb param. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: SPL: Initialize DDR at 133MHzOtavio Salvador2013-01-21-0/+20
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: SPL: Add boot mode supportOtavio Salvador2013-01-21-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the boot mode support for i.MX23 processors. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: Add boot mode descriptionOtavio Salvador2013-01-21-0/+12
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: Add support on print_cpuinfo()Otavio Salvador2013-01-21-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add information to identify i.MX23 chips and its known revisions. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: ssp: Fix ssp-regs.h for MX23Marek Vasut2013-01-21-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Disable SSP2 and SSP3 ports on MX23. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: Add POWER and CLKCTRL register definitionsMarek Vasut2013-01-21-1/+585
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add register definitions for the i.MX23 power control block and clock control block. These are essential for the basic bootstrap of the i.MX23. Also, properly include them in imx-regs.h . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: Add iomux-mx23.hOtavio Salvador2013-01-21-0/+361
| | | | | | | | | | | | | | | | | | | | | | | | | | | This has been copied from Linux source at revision 786f02b719f. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mx23: Add register base addressesOtavio Salvador2013-01-21-5/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the base addresses of i.MX23 and easy the detection of wrong order in board setup, in case no SoC has been set, an error is raised during build. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: clock: Use 'mxs' prefix for methodsOtavio Salvador2013-01-21-44/+44
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: ssp: Pull out the SSP bus to regs conversionMarek Vasut2013-01-21-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create function which converts SSP bus number to SSP register pointer. This functionality is reimplemented multiple times in the code, thus make one common implementation. Moreover, make it a switch(), since the SSP ports are not mapped in such nice linear fashion on MX23, therefore having it a switch will simplify things there. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| | * mxs: mmc: Drop unused members from struct mxsmmc_privMarek Vasut2013-01-21-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The clock data are not used by the driver, drop them. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Fleming <afleming@freescale.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * | fdt: fix dts preprocessor optionsAllen Martin2013-01-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using "-ansi" preprocessor option will cause dts lines that begin with '#' to choke the preprocessor. Change to "-x assembler-with-cpp" instead which is what the kernel uses to preprocess dts files. Signed-off-by: Allen Martin <amartin@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: fdt: add apbdma nodeAllen Martin2013-01-17-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | Add apbdma node for tegra20 and tegra30, copied directly from tegra Linux dtsi files. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: fdt: sort dts filesAllen Martin2013-01-17-281/+268
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sort nodes in dts files according the the following rules: 1) Any nodes that already exist in any /include/d file, in the order they appear in the /include/d file. 2) Any nodes with a reg property, in order of their address. 3) Any nodes without a reg property, alphabetically by node name. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: fdt: remove clocks nodesAllen Martin2013-01-17-147/+0
| | | | | | | | | | | | | | | | | | | | | These nodes are unused. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | tegra: remove IRDA pinmux synonymAllen Martin2013-01-16-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | IRDA is a synonym for UARTB in tegra pinmux, remove all usage of this synonym and replace with UARTB to disambiguate. Signed-off-by: Allen Martin <amartin@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | Tegra30: I2C: Enable I2C driver on CardhuTom Warren2013-01-16-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | Tested all 5 'buses', i2c probe enumerates device addresses on all but dev 4 (I2C4) [no devices on that bus on my Cardhu]. Note that this uses the extant tegra_i2c.c driver w/o modification. Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | Tegra30: fdt: Update DT files with I2C info for T30/CardhuTom Warren2013-01-16-0/+102
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note that T30 does not have a separate/different DVC (power I2C) controller like T20 - all 5 I2C controllers are identical, but DVC_I2C is still used to designate the controller intended for power control (PWR_I2C in the schematics). On Cardhu, it's used to access the PMU and EEPROM, as well as the audio codec, temp sensor, and fuel gauge devices from the OS. Signed-off-by: Tom Warren <twarren@nvidia.com>
generated by cgit v1.1 at 2024-11-08 04:11:49 +0000