summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* net: phy: vitesse: Fix cis8204 RGMII_ID codePhil Edworthy2017-02-07-3/+1
| | | | | | | | | | | | | | Commit 79e86ccb3786c8b20004db3fa10a70049456f580 "vitesse: remove duplicated argument to ||" correctly removed a redundant check. However, I believe that the original code was simply wrong, and should have been checking against RGMII_ID. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Marvell: Use phy_interface_is_rgmii helper functionPhil Edworthy2017-02-07-4/+1
| | | | | | Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Add support for Marvell M88E1512Phil Edworthy2017-02-07-2/+7
| | | | | | | | This device also works with the 88E1518 code, so we just adjust the UID mask accordingly. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: Fix mask so that we can identify Marvell 88E1518Phil Edworthy2017-02-07-2/+2
| | | | | | | | | The mask for the 88E1510 meant that the 88E1518 code would never be used. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: ti: Fix dp83867 RGMII_TXID interface pathPhil Edworthy2017-02-07-2/+1
| | | | | | | | | | | | There is code that is specifically for RGMII_TXID interface, but this will never get used because the code checks that the RGMII interface is RGMII_ID to RGMII_RXID; RGMII_TXID is after this. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* tools: Add tool to add crc8 to a mac addressoliver@schinagl.nl2017-02-07-0/+80
| | | | | | | | | | This patch adds a little tool that takes a generic MAC address and generates a CRC byte for it. The output is the full MAC address without any separators, ready written into an EEPROM. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* tools: Allow crc8 to be usedoliver@schinagl.nl2017-02-07-0/+4
| | | | | | | | | This patch enables crc8 to be used from within the tools directory using u-boot/crc.h. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* net: core: cosmetic: A MAC address is not limited to SROMoliver@schinagl.nl2017-02-07-1/+1
| | | | | | | | Currently, we print that the MAC from the SROM does not match. It can be many forms of ROM, so lets drop the S. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: cosmetic: Define ethernet name lengtholiver@schinagl.nl2017-02-07-1/+2
| | | | | | | | There are various places where the ethernet device name is defined to several different sizes. Lets add a define and start using it. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: cosmetic: Make the MAC address string less magicaloliver@schinagl.nl2017-02-07-1/+6
| | | | | | | | | | In u-boot printf has been extended with the %pM formatter to allow printing of MAC addresses. However buffers that want to store a MAC address cannot safely get the size. Add a define for this case so the string of a MAC address can be reliably obtained. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: cosmetic: Do not use magic values for ARP_HLENoliver@schinagl.nl2017-02-07-36/+38
| | | | | | | | | | | Commit 674bb249825a ("net: cosmetic: Replace magic numbers in arp.c with constants") introduced a nice define to replace the magic value 6 for the ethernet hardware address. Replace more hardcoded instances of 6 which really reference the ARP_HLEN (iow the MAC/Hardware/Ethernet address). Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: macb: Remove redundant #ifdef CONFIG_DM_ETHWenyou Yang2017-02-07-3/+0
| | | | | | | Remove the redundant #ifdef CONFIG_DM_ETH/#endif. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: macb: Add the clock supportWenyou Yang2017-02-07-0/+41
| | | | | | | Due to introducing the at91 clock driver, add the clock support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: Kconfig: Add CONFIG_MACB optionWenyou Yang2017-02-07-0/+10
| | | | | | | Add CONFIG_MACB option in KConfig to be used to select the Cadence MACB Ethernet driver. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-02-03-103/+356
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/ls1046aqds_defconfig configs/ls1046aqds_nand_defconfig configs/ls1046aqds_qspi_defconfig configs/ls1046aqds_sdcard_ifc_defconfig configs/ls1046aqds_sdcard_qspi_defconfig configs/ls1046ardb_emmc_defconfig configs/ls1046ardb_qspi_defconfig configs/ls1046ardb_sdcard_defconfig
| * arch: powerpc: update the eLBC IP input clockPrabhakar Kushwaha2017-02-03-40/+24
| | | | | | | | | | | | | | | | | | | | | | | | eLBC IP clock is always a constant divisor of platform clock pre-defined per SoC. Clock ratio register (LCRR) used in current implementation governs eLBC IP output cloc. Update sys_info->freq_localbus to represent eLBC input clock with value constant divisor of platform clock. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arch: powerpc: Move CONFIG_FSL_ELBC to KconfigPrabhakar Kushwaha2017-02-03-16/+20
| | | | | | | | | | | | | | Enable ELBC from Kconfig. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arch: arm: update the IFC IP input clockPrabhakar Kushwaha2017-02-03-24/+5
| | | | | | | | | | | | | | | | | | | | | | | | IFC IP clock is always a constant divisor of platform clock pre-defined per SoC. Clock control register (CCR) used in current implementation governs IFC IP output clock. Update sys_info->freq_localbus to represent IFC input clock with value constant divisor of platform clock. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arch: powerpc: update the IFC IP input clockPrabhakar Kushwaha2017-02-03-8/+21
| | | | | | | | | | | | | | | | | | | | | | | | IFC IP clock is always a constant divisor of platform clock pre-defined per SoC. Clock control register (CCR) used in current implementation governs IFC IP output clock. Update sys_info->freq_localbus to represent IFC input clock with value constant divisor of platform clock. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arch: powerpc: Move CONFIG_FSL_IFC to KconfigPrabhakar Kushwaha2017-02-03-13/+17
| | | | | | | | | | | | | | Enable IFC from Kconfig. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012a: Add support of PPAPrabhakar Kushwaha2017-02-03-0/+22
| | | | | | | | | | | | | | | | | | | | | | The PPA implements PSCI which requires for power managment. Added support of PPA for LS1012AQDS, LS1012ARDB and LS1012AFRDM. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board: freescale: ls1012a: Enable secure DDR on LS1012A platformsPrabhakar Kushwaha2017-02-03-0/+91
| | | | | | | | | | | | | | | | | | | | | | PPA binary needs to be relocated on secure DDR, hence marking out a portion of DDR as secure if CONFIG_SYS_MEM_RESERVE_SECURE flag is set Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: Enable workaround for erratum A-008336York Sun2017-01-31-0/+1
| | | | | | | | | | | | | | Erratum A-008336 applies to LS1046A per latest SoC document. Signed-off-by: York Sun <york.sun@nxp.com> CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
| * armv7: ls1021aqds: Set cpo_sample for erratum A-009942York Sun2017-01-31-0/+3
| | | | | | | | | | | | | | | | | | Set cpo_sample as suggested by the driver "WARN: pls set popts->cpo_sample = 0x58 in <board>/ddr.c to optimize cpo". Signed-off-by: York Sun <york.sun@nxp.com> CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
| * drivers: net: fsl-mc: Fixup MAC addresses in DPCBogdan Purcareata2017-01-31-2/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixup port_mac_address property in MC DPC with values from the u-boot environment. Since u-boot already reads the environment MAC addresses when probing the PHYs, use these values. The u-boot environment MAC addresses take precedence over any eventual ones defined in the DPC, except for the case where they are randomly assigned (no u-boot env value declared for port). The patch assumes the "/board_info/ports/" node is present in the DPC. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [York S: Fix several indentations] Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: enable usb in defconfigTang Yuantian2017-01-27-0/+18
| | | | | | | | | | Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: added usb nodes in dtsTang Yuantian2017-01-27-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | The LS1046A processor has three integrated USB 3.0 controllers (USB1, USB2, and USB3) that allow direct connection to the USB ports with appropriate protection circuitry and power supplies. USB1 and USB2 ports are powered by a NX5P2190UK device, which supplies 5v power at up to 1.2 A. The power enable and power-fault-detect pins are connected to the LS1046A processor via CPLD for individual port management. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046aqds: added usb feature supportTang Yuantian2017-01-27-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | The LS1046AQDS processor has three integrated USB 3.0 controllers (USB1, USB2, and USB3) that allow direct connection to the USB ports with appropriate protection circuitry and power supplies. USB1 and USB2 ports are powered by a NX5P2190UK device, which supplies 5v power at up to 1.2 A. The power enable and power-fault-detect pins are connected to the LS1046A processor via CPLD for individual port management. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge git://git.denx.de/u-boot-mpc85xxTom Rini2017-02-01-17/+38
|\ \
| * | powerpc: mpc5200: Correct return value of memcpy functionMark Marshall2017-02-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The memcpy() function returns a pointer to trg. Signed-off-by: Mark Marshall <Mark.Marshall@omicron.at> Reviewed-by: Thomas Graziadei <thomas.graziadei@omicronenergy.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: York Sun <york.sun@nxp.com>
| * | powerpc: mpc85xx: Use symbolic names for cache control bitsMark Marshall2017-01-31-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | We should use the symbolic names for the cache control bits. Signed-off-by: Mark Marshall <Mark.Marshall@omicron.at> Reviewed-by: Thomas Graziadei <thomas.graziadei@omicronenergy.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | powerpc: mpc83xx: Enable pre-relocation mallocmario.six@gdsys.cc2017-01-31-7/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | To enable DM on MPC83xx, we need pre-relocation malloc, which is implemented in this patch. Signed-off-by: Mario Six <mario.six@gdsys.cc> [York S: Fixed compiling warning for unused variable 'i'] Reviewed-by: York Sun <york.sun@nxp.com>
| * | powerpc: mpc83xx: Minimize r1 modificationmario.six@gdsys.cc2017-01-31-5/+8
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The r1 register is modified several times during the cache-ram setup of the MPC83xx SoCs. Since this SP modification confuses debuggers, we use a general purpose register to compute the new stack pointer value, and only set the SP once after all computations are done. Signed-off-by: Mario Six <mario.six@gdsys.cc> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-02-01-267/+4692
|\ \
| * | BOARD: MCCMON6: Provide support for iMX6q based mccmon6 boardLukasz Majewski2017-01-30-0/+1245
| | | | | | | | | | | | | | | | | | | | | | | | This patch provides u-boot support for Liebherr (LWN) mccmon6 board. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | arm: dts: imx53-cx9020: fix packetloss on fec_mxcPatrick Bruenn2017-01-30-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pinmuxing for i.MX53 FEC ethernet copied from <kernel>/arch/arm/boot/dts/imx53-qsb-common.dtsi (at least until v4.9) was bad. It is different from the manual pinmuxing in <u-boot>/board/freescale/mx53loco/mx53loco.c which was used in cx9020 implementation previously before mainlining into u-boot. It seems the bug in imx53-qsb kernel device tree is hidden for so long, because it was never used, by the kernel driver. Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
| * | imx: mx6sxsabreauto: enable more dm driversPeng Fan2017-01-27-209/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable MMC/I2C/GPIO/PMIC/REGULATOR/PCA953X DM drivers for mx6sxsabreauto board. Drop non-DM code. Note: The i.MX DM drivers has such dependency. MXC GPIO -> MXC I2C -> PFUZE/REGULATOR MXC GPIO -> PCA953X MXC GPIO -> FSL_USDHC So the drivers needs to be enabled all to avoid compiling error. The uboot dm tree log: => dm tree Class Probed Name ---------------------------------------- root [ + ] root_driver thermal [ ] |-- imx_thermal simple_bus [ + ] |-- soc simple_bus [ + ] | |-- aips-bus@02000000 simple_bus [ ] | | |-- spba-bus@02000000 gpio [ + ] | | |-- gpio@0209c000 gpio [ + ] | | |-- gpio@020a0000 gpio [ + ] | | |-- gpio@020a4000 gpio [ + ] | | |-- gpio@020a8000 gpio [ + ] | | |-- gpio@020ac000 gpio [ + ] | | |-- gpio@020b0000 gpio [ + ] | | |-- gpio@020b4000 simple_bus [ ] | | |-- anatop@020c8000 simple_bus [ ] | | |-- snvs@020cc000 pinctrl [ + ] | | `-- iomuxc@020e0000 pinconfig [ + ] | | `-- imx6x-sabreauto pinconfig [ + ] | | |-- i2c2grp-1 pinconfig [ + ] | | |-- i2c3grp-2 pinconfig [ ] | | |-- uart1grp pinconfig [ + ] | | |-- usdhc3grp pinconfig [ ] | | |-- usdhc3grp-100mhz pinconfig [ ] | | |-- usdhc3grp-200mhz pinconfig [ + ] | | |-- usdhc4grp pinconfig [ + ] | | `-- vccsd3grp simple_bus [ + ] | |-- aips-bus@02100000 mmc [ + ] | | |-- usdhc@02198000 mmc [ + ] | | |-- usdhc@0219c000 i2c [ + ] | | |-- i2c@021a4000 i2c_generic [ + ] | | | |-- generic_8 i2c_generic [ + ] | | | `-- generic_4e i2c [ + ] | | `-- i2c@021a8000 gpio [ + ] | | |-- gpio@30 gpio [ + ] | | `-- gpio@32 simple_bus [ ] | `-- aips-bus@02200000 simple_bus [ ] | `-- spba-bus@02200000 simple_bus [ + ] `-- regulators regulator [ + ] `-- regulator@0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: dts: mx6sxsabreauto: enable i2c2/3Peng Fan2017-01-27-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | Enable i2c2/3, add pinctrl settings. Add max7310 for i2c3. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6sxsabreauto: enable pinctrl driverPeng Fan2017-01-27-0/+2
| | | | | | | | | | | | | | | | | | | | | Enable pinctrl driver for mx6sxsabreauto board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | imx: mx6sx: add dts for mx6sxsabreauto boardPeng Fan2017-01-27-0/+3285
| | | | | | | | | | | | | | | | | | | | | | | | Add dts for mx6sxsabreauto board. dts related files imported fro Linux (commit e5517c2a5a4). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * | ARM: imx6ul: Move liteSOM source to SoC directoryMarcin Niestroj2017-01-27-19/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moving arch/arm/mach-litesom/ to arch/arm/cpu/armv7/mx6/ was requested in [1] during discussion of chiliSOM support patches. [1] http://lists.denx.de/pipermail/u-boot/2017-January/279137.html Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * | udoo_neo: Remove ramdiskaddr environment variableBreno Lima2017-01-27-1/+0
| | | | | | | | | | | | | | | | | | | | | Remove unused ramdiskaddr environment variable. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
| * | udoo_neo: Remove trailing semicolon and spaceBreno Lima2017-01-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Remove the trailing semicolon and space. It's not necessary to have it on the last condition. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
| * | udoo_neo: Add fdt_addr_r environment variableBreno Lima2017-01-27-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to doc/README.distro: "fdt_addr_r: Mandatory. The location in RAM where the DTB will be loaded or copied to when processing the fdtdir/devicetreedir or fdt/devicetree options in extlinux.conf." So add the fdt_addr_r environment variable. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
| * | imx_common: check for bmode Serial DownloaderStefan Agner2017-01-27-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before commit 81c4eccb55cc ("imx: mx6: fix USB bmode to use reserved value") a non-reserved value has been used to trigger Serial Downloader using bmode, which translated to a GPR9 value of 0x10. However, on some boards the non-reserved value lead to unreliable bmode command. With the above mentioned commit, U-boot switched to use [7:4] b0001, which translates to GPR9 0x10 for Serial Downloader mode. Check for the new value and classify it as Serial Downloader mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> CC: Stefano Babic <sbabic@denx.de> CC: Tim Harvey <tharvey@gateworks.com> CC: Fabio Estevam <Fabio.Estevam@freescale.com> CC: Eric Nelson <eric.nelson@boundarydevices.com>
| * | imx: nitrogen6x: fix USB host initializationGary Bisson2017-01-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB Host scanning has been broken since v2016.05. This is due to all the USB changes that happened between v2016.03 and v2016.05, especially: 2ef117fe4f usb: Remove 200 ms delay in usb_hub_port_connect_change() a22a264ec3 usb: Change power-on / scanning timeout handling So we need to increase the init delay to 2s using the usb_pgood_delay environment variable. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
| * | README: mxc_hab: Adapt the CONFIG_SECURE_BOOT text to KconfigFabio Estevam2017-01-27-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update the mxc_hab README file to reflect that. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
| * | mx6qsabreauto: Pass the correct parallel NOR widthFabio Estevam2017-01-27-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | On mx6qsabreauto the parallel NOR width is 16 bits, so pass configure CONFIG_SYS_FLASH_CFI_WIDTH correctly so that the CFI driver does not use 8 bits by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | tools: imximage: refactor header length calculations for imximage v1Martin Kaiser2017-01-27-22/+16
| |/ | | | | | | | | | | | | | | | | | | | | | | We can use the same header length calculations for both imximage v1 and v2. This addresses TODO comments about imximage v1 in the current code. With this patch applied, *header_size_ptr in imximage_set_header() will have the correct value for both imximage v1 and v2. This is necessary for people wanting to add proprietary data behind the created imximage. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Cc: sbabic@denx.de
* | Merge git://www.denx.de/git/u-boot-marvellTom Rini2017-02-01-189/+1970
|\ \
generated by cgit v1.1 at 2024-11-07 23:06:00 +0000