summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* test/py: use space to interrupt autobootStephen Warren2016-02-26-1/+1
| | | | | | | | | | | | | | | Sending CTRL-C to QEMU's stdin aborts the process, even if stdin is being used as a serial port (at least in the raspi2 machine with "qemu -serial stdin"). Avoid sending CTRL-C to U-Boot to prevent it exiting. I'd originally used CTRL-C to make sure that if the character used to abort autoboot ended up being treated as part of a command as well, it'd abort command entry and return the prompt to a known state. However, this is not needed, since aborting the autoboot eats the character used to do that. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Simon Glass <sjg@chromium.org>
* ARM: rpi: increase CONFIG_SYS_MAXARGSStephen Warren2016-02-26-1/+1
| | | | | | | | This allows all the hush tests implemented in test/py to pass, under qemu at least. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: zynq: zynqmp: Enable DCC serial driver by defaultMichal Simek2016-02-25-12/+5
| | | | | | Compile DCC serial driver by default. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* serial: dcc: Move driver to DMMichal Simek2016-02-25-25/+49
| | | | | | | | | | | | | | | | | | | | | | Enabling this driver requires some DT changes. Adding DCC to root or main bus: dcc: dcc { compatible = "arm,dcc"; u-boot,dm-pre-reloc; }; Extend alias list to link DCC: serial0 = &uart0; serial1 = &uart1; serial2 = &dcc; Change stdout-path to point to dcc port. stdout-path = "serial2:115200n8"; Also add support for debug uart to help with early debug. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-02-25-1/+6
|\
| * patman: fix series-notes handling for buildmanAlbert ARIBAUD2016-02-24-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A patman series with a 'Series-notes' section causes buildman to crash with: self.series.notes += self.section TypeError: cannot concatenate 'str' and 'list' objects Fix by initializing series.notes as a one-element array rather than a scalar. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
| * dts: keep clock-names and clocks in SPL DTB if SPL_CLK is enabledMasahiro Yamada2016-02-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | These two properties are necessary for SPL to get clocks from DT. Note: For now, only clock look-up by index is supported (clk_get_by_index() function), so "clock-names" is never parsed in U-Boot. However, we may want to support something like clk_get_by_name() in the future, so let's keep "clock-names" as well as "clocks". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | test/py: Add option to skip SPL signature checkingMichal Simek2016-02-25-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide user option to skip SPL signature verification for cases where u-boot is build with SPL support but full U-Boot is also verified without SPL. If you want to support this feature please add env__spl_skipped = True to your boardenv configuration file. For example Xilinx Zynq is using this feature where the same U-Boot binary is checked with SPL and without SPL(with FSBL). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2016-02-24-9/+21
|\ \
| * | arm: socfpga: Fix ethernet reset handlingMarek Vasut2016-02-24-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch caused cpu_eth_init() to not be called anymore for DM-capable boards: commit c32a6fd07b1839e4a45729587ebc8e1c55601a4d Date: Sun Jan 17 14:51:56 2016 -0700 net: Don't call board/cpu_eth_init() with driver model This breaks ethernet on SoCFPGA, since we use that function to un-reset the ethernet blocks. Invoke the ethernet reset function from arch_misc_init() instead to fix the breakage. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Denis Bakhvalov <denis.bakhvalov@nokia.com>
| * | arm: socfpga: Remove bashisms from qts filterMarek Vasut2016-02-24-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Weed out bashisms from the script. The echo -e does not work in dash, which is the default /bin/sh in debian . Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Dalon Westergreen <dwesterg@gmail.com>
| * | arm: socfpga: cv_socdk: Add support for QSPI bootMarek Vasut2016-02-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing DT nodes to allow booting from QSPI NOR. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Denis Bakhvalov <denis.bakhvalov@nokia.com>
| * | arm: socfpga: av_socdk: Add support for QSPI bootMarek Vasut2016-02-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing DT nodes to allow booting from QSPI NOR. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Denis Bakhvalov <denis.bakhvalov@nokia.com>
| * | arm: socfpga: Add missing CONFIG_BUILD_TARGETMarek Vasut2016-02-24-0/+3
| |/ | | | | | | | | | | | | | | | | | | Add the missing CONFIG_BUILD_TARGET to get u-boot-with-spl.sfp built automatically upon running make in the source tree. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Denis Bakhvalov <denis.bakhvalov@nokia.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2016-02-24-47/+72
|\ \
| * | implement Fastboot via USB OTG on bcm28155_ap boardsSteve Rae2016-02-24-20/+0
| | | | | | | | | | | | | | | | | | | | | Don't understand how it happened, but this change got applied twice! Therefore, removing the duplicated items. Signed-off-by: Steve Rae <srae@broadcom.com>
| * | fastboot: update error and warning messagesSteve Rae2016-02-24-5/+5
| | | | | | | | | | | | | | | | | | | | | Fix the formatting in error messages, and demote one error message to a warning, as it is only informational. Signed-off-by: Steve Rae <srae@broadcom.com>
| * | usb: eth: fix memalign() parameter orderStephen Warren2016-02-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The alignment and size were swapped, leading to malloc heap corruption. On my system, this sometimes caused U-Boot to crash during or after certain USB Ethernet operations. Fixes: c8c2797c3810 ("dm: usb: eth: Support driver model with USB Ethernet") Signed-off-by: Stephen Warren <swarren@nvidia.com>
| * | dfu: odroid xu3: Define DFU_MANIFEST_POLL_TIMEOUT to handle large files ↵Lukasz Majewski2016-02-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | transmission and storage As tested on the Odroid XU3, large files to be stored on the file system require considerable time to be physically written to the medium. The default 300 ms is not enough to store large file (e.g. 26 MiB). To fix this situation the DFU_MANIFEST_POLL_TIMEOUT has been defined. It is used to cease the communication with dfu-util and allow the target board to store the data on file system. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
| * | dfu: usb: f_dfu: Set deferred call for dfu_flush() functionLukasz Majewski2016-02-24-8/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes situation when one would like to write large file into medium with the file system (fat, ext4, etc). This change sets file size limitation to the DFU internal buffer size. Since u-boot is not supporting interrupts and seek on file systems, it becomes challenging to store large file appropriately. To reproduce this error - create large file (around 26 MiB) and sent it to the target board. Lets examine the flow of USB transactions: 0. DFU uses EP0 with 64B MPS [Max Packet Size] 1. Send file - OUT (PC->target) - dat_26MiB.img is sent with 4096 B transactions 2. Get status - OUT (PC->target) - wait for DFU_STATE_dfuDNLOAD_IDLE (0x05) sent from target board - IN transaction (target->PC) 3. The whole file content is sent to target - OUT (PC->target) with ZLP [Zero Length Packet] Now the interesting part starts: 4. OUT (PC->target) Setup transaction (request to share DFU state) 5. IN (target->PC) - reply the current DFU state - In the UDC driver the req->completion (with dfu_flush) is called after successful IN transfer. - The dfu_flush() (called from req->completion callback) saves the whole file at once (u-boot doesn't support seek on fs). Such operation takes considerable time. When the file is large - e.g. 26MiB - this time may be more than 5 seconds. 6. OUT (PC->target) - ZLP, is send in the same time when dfu_flush() writes data to eMMC memory. The dfu-util application has hard coded timeout on USB transaction completion set to 5 seconds (it uses libusb calls). When the file to store is large (e.g. 26 MiB) the time needed to write it may excess the dfu-util timeout and following error message will be displayed: "unable to read DFU status" on the HOST PC console. This change is supposed to leverage DFU's part responsible for storing files on file systems. Other DFU operations - i.e. raw/partition write to NAND and eMMC should work as before. The only functional change is the error reporting. When dfu_flush() fails the u-boot prompt will exit with error information and dfu-util application exits afterwards as well. Test HW: - Odroid XU3 (Exynos5433) - test with large file - Trats (Exynos4210) - test for regression - eMMC, raw, Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reported-by: Alex Gdalevich <agdalevich@axion-biosystems.com> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Heiko Schocher <hs@denx.de>
| * | usb: ehci: Be explicit about the BE IO accessorsMarek Vasut2016-02-24-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add explicit cpu_to_be32()/be32_to_cpu() conversion to BE EHCI I/O accessors to align them with their LE counterpart. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
| * | usb: ehci: Clear USBMODE_BE on LE MMIOMarek Vasut2016-02-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | If the USB EHCI is configured for little endian MMIO, make sure to clear the USBMODE_BE flag from the USBMODE register. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
| * | usb: ehci: Implement V2P mappingMarek Vasut2016-02-24-10/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain processor architectures, like MIPS, require that the USB structures and transfer buffers are passed with their PA to the USB controller. If VA is passed, the USB will not work. Add the necessary virt_to_phys() calls into the USB EHCI code to make it work. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
| * | usb: ehci: Use map_physmem in ehci-genericMarek Vasut2016-02-24-1/+3
| |/ | | | | | | | | | | | | | | | | Some architectures, like MIPS, require remapping of the registers. Add the map_physmem() call to handle it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-02-24-274/+1177
|\ \
| * | armv7: ls102xa: Move smmu and stream id initialization into the common soc codeAlison Wang2016-02-24-83/+52
| | | | | | | | | | | | | | | | | | | | | | | | The initialization for smmu and stream id is moved into the common soc code. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | board: ls1043ardb: Modify pin-muxing code for USB and QE-HDLCZhao Qiang2016-02-24-10/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | QE-HDLC and USB multi-use the pins, modify the pin-muxing code for them, when set "hwconfig=qe-hdlc" in uboot, assign the pins to QE-HDLC, if not, assgin it to USB Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | board: ls1043rdb: Move USB muxing config to config_board_muxZhao Qiang2016-02-24-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | Pin-muxing code should be in config_board_mux, move USB muxing config to config_board_mux. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | board: ls1043ardb: Add micro QE support for ls1043ardbZhao Qiang2016-02-24-4/+17
| | | | | | | | | | | | | | | Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | driver: qe: Mask the codes not used for micro QEZhao Qiang2016-02-24-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | there are some code in qe.c not used for micro QE, use "#ifdef CONFIG_QE" to mask them. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043aqds: Add USB support for ls1043aqdsQianyu Gong2016-02-24-0/+28
| | | | | | | | | | | | | | | | | | | | | Add USB XHCI support for ls1043qds board. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/fsl-layerscape: fdt: add fixup for Fman ucodeQianyu Gong2016-02-24-0/+7
| | | | | | | | | | | | | | | | | | | | | Add fdt fixup to insert Fman firmware into the device tree. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | driver/fm: fdt.c: fix fdt_fixup_fman_firmware() to support ARM platformsQianyu Gong2016-02-24-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | Use fdt32_to_cpu() to convert the data correctly for both endianness platforms. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | fm: fdt: Move fman ucode fixup to driver codeQianyu Gong2016-02-24-120/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | Not only powerpc/mpc85xx but also Freescale Layerscape platforms will use fdt_fixup_fman_firmware() to insert Fman ucode blob into the device tree. So move the function to Fman driver code. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | qe: move drivers/qe/qe.h to include/fsl_qe.hQianyu Gong2016-02-24-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | As the QE firmware struct is shared with Fman, move the header file out of drivers/qe/. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls2080: Update bootcmd env variablePrabhakar Kushwaha2016-02-24-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Before Linux boot DPL must be deployed to DPAA2 interface. So update bootcmd env variable to make sure DPL deployment before Linux boot. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls2080: Add mcinitcmd env variable in default envPrabhakar Kushwaha2016-02-24-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | Define mcinitcmd env variable to load Management complex during u-boot boot sequence. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS boardAlison Wang2016-02-24-7/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in SD boot now. For the customer's demand, QSPI needs to be supported in SD boot too. This patch adds QSPI or IFC support in SD boot according to the corresponding defconfig. For detail, ls1021aqds_sdcard_ifc_defconfig is used to support IFC in SD boot and ls1021aqds_sdcard_qspi_defconfig is used to support QSPI in SD boot. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043a: Implement workaround for erratum A009660Mingkai Hu2016-02-24-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Memory controller performance is not optimal with default internal target queue register value, write required value for optimal DDR performance. Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8/ls1043a: enable workaround for errarum A009942Shengzhou Liu2016-02-24-0/+1
| | | | | | | | | | | | | | | | | | | | | DDR erratum A-009942 applies to LS1043A. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | powerpc/SECURE_BOOT: Add PAMU driverAneesh Bansal2016-02-24-9/+709
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PAMU driver basic support for usage in Secure Boot. In secure boot PAMU is not in bypass mode. Hence to use any peripheral (SEC Job ring in our case), PAMU has to be configured. The patch reverts commit 7cad2e38d61e27ea59fb7944f7e647e97ef292d3. The Header file pamu.h and few functions in driver have been derived from Freescale Libos. Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | drivers/crypto/fsl : Allocate output ring with size aligned to CACHELNE SIZERuchika Gupta2016-02-24-12/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The output ring needs to be invalidated before enqueuing the job to SEC. While allocation of space to output ring, it should be taken care that the size is cacheline size aligned inorder to prevent invalidating valid data. The patch also correct the method of aligning end of structs while flushing caches Since start = align(start_of_struct), it is incorrect to assign end = align(start + struct_size). It should instead be, end = align(start_of_struct + struct_size). Signed-off-by: Saksham Jain <saksham@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls2080a: Increase default hugepage countAshish Kumar2016-02-24-2/+2
| | | | | | | | | | | | | | | | | | | | | Increase default hugepage count to 256 from 16 Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | arm: ls1021aqds: Enable driver model lpuart serial driverYork Sun2016-02-24-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver model suport. Enable lpuart port driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
| * | arm: ls1021aqds: Convert to driver model and enable serial supportYork Sun2016-02-23-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split duart configuration as device tree file. Move /chosen node out of board commone device tree. Convert ls1021aqds nor and SD configurations to driver model support (qspi already uses DM). Enable ns16550 DM serial driver for nor configurations. Signed-off-by: York Sun <york.sun@nxp.com> CC: Alison Wang <alison.wang@nxp.com> CC: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alison Wang <alison.wang@nxp.com>
* | | microblaze: Add missing chosen nodeMichal Simek2016-02-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fdtgrep requires /chosen node to be specified or at least more nodes which stays in DTS to generate output. Error message: ./tools/fdtgrep -b u-boot,dm-pre-reloc -RT dts/dt.dtb -n /chosen -O dtb | ./tools/fdtgrep -r -O dtb - -o spl/u-boot-spl.dtb -P pinctrl-0 -P pinctrl-names -P clocks -P clock-names -P interrupt-parent Error: FDT_ERR_BADMAGIC This patch add empty chosen node to keep fdtgrep happy and pass compilation for in tree DTS file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | cmd: mem: Show 64bit addresses which are testedMichal Simek2016-02-24-1/+1
| | | | | | | | | | | | | | | | | | Fix print message to show full 64bit addresses. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | dm: Remove ARM dcc from the listMichal Simek2016-02-24-1/+0
| | | | | | | | | | | | | | | | | | | | | Remove ARM Debug communication channel driver from the list of not converted drivers to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | rpi: always scroll by 10 linesLubomir Rintel2016-02-24-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Scrolling the simple framebuffer is really slow in Raspberry Pi to the point it delays the boot by a second or two and makes longer output inconvenient to follow (printenv, md). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* | | rpi: set board serial number in environmentLubomir Rintel2016-02-24-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | Gets propagated into the device tree and then into /proc/cpuinfo where users often expect it. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org>
generated by cgit v1.1 at 2024-11-09 14:40:44 +0000