summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* ARM: dts: AM335x-evmsk: Add initial supportLokesh Vutla2016-05-27-2/+762
| | | | | | | Add initial DTS support for AM335x-evm sk. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt ↵Mugunthan V N2016-05-27-3/+2
| | | | | | | | | | | | | | | binding docs As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In AM335x the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* ARM: AM335x: Enable FITLokesh Vutla2016-05-27-52/+11
| | | | | | | Use a single defconfig for all AM335x platforms by enabling FIT Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: dts: am335x-bone: Enable uart and timerLokesh Vutla2016-05-27-4/+6
| | | | | | | | Allow am335x-bone.dts to be built and enable uart and timer for all beaglebones. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* board: am33xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+14
| | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: AM43xx: configs: Update usb host boot defconfigLokesh Vutla2016-05-27-0/+14
| | | | | | | | Convert usb host boot defconfig to use DM, DT. Also enable FIT support. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: AM437x-IDK Initial SupportLokesh Vutla2016-05-27-2/+425
| | | | | | | Add initial DTS support for AM437x-IDK evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: dts: AM43x-EPOS Initial SupportLokesh Vutla2016-05-27-2/+825
| | | | | | | Add initial DTS support for AM43-EPOS evm. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM43xx: Enable FITLokesh Vutla2016-05-27-114/+15
| | | | | | | | Use a single defconfig for all AM43xx platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: AM43xx: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+12
| | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7: configs: Remove obsolete configsLokesh Vutla2016-05-27-89/+0
| | | | | | | | | | | | | | | | | Removing: uart3_defconfig: Now uart3 can be selected using menuconfig, removing separate config for uart mode. Doing uart boot is not straight forward as ROM uses uart3 as default serial console. In order to boot to prompt, concole in both u-boot and kernel needs to be changed. qspiboot_defconfig: The only advantage of enabling QSPI_BOOT is selecting env in QSPI. Eventually env needs to be selected by menuconfig so removing qspiboot_defconfig. qspiboot can be done using dra7xx_evm_defconfig. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: DRA7: Enable FITLokesh Vutla2016-05-27-111/+15
| | | | | | | | Use a single defconfig for all DRA7 platforms by enabling FIT and delete the platform specific defconfigs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* board: dra7: fit: add support for selecting dtb dynamicallyLokesh Vutla2016-05-27-0/+12
| | | | | | | | FIT allows for a multiple dtb in a single image. SPL needs a way to detect the right dtb to be used. Adding support for the same. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* Remove unused BOOTFLAG definitionsChris Packham2016-05-27-16/+0
| | | | | | | | This follows on from commit d98b052 ("powerpc: Cleanup BOOTFLAG_* references") and commit fc3d297 ("Drop bogus BOOTFLAG_* definitions"). Remove the definitions that have crept in since. Signed-off-by: Chris Packham <judge.packham@gmail.com>
* spl: Add an option to load a FIT containing U-Boot from UARTLokesh Vutla2016-05-27-14/+84
| | | | | | | | This provides a way to load a FIT containing U-Boot and a selection of device tree files from UART. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* spl: fit: Do not print selected dtb during fit loadLokesh Vutla2016-05-27-3/+1
| | | | | | | No prints should be allowed during UART load. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* spl: Support loading a FIT from NANDLokesh Vutla2016-05-27-5/+32
| | | | | | | | | | | Detect a FIT when loading from NAND and handle it using the new FIT SPL support. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make sure we continue to use (void *)(unsigned long) for load_addr]. Signed-off-by: Tom Rini <trini@konsulko.com>
* mtd: nand: am335x: spl: Fix copying of imageLokesh Vutla2016-05-27-1/+14
| | | | | | | | | When offset is not aligned to page address, it is possible that extra offset will be read from nand. Adjust the image such that first byte of the image is at load address after the first page is read. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* spl: Support loading a FIT from SPILokesh Vutla2016-05-27-5/+32
| | | | | | | | Detect a FIT when loading from SPI and handle it using the new FIT SPL support. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* spl: Support loading a FIT from FAT FSLokesh Vutla2016-05-27-4/+32
| | | | | | | | | | Detect a FIT when loading from a FAT File system and handle it using the new FIT SPL support. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* spl: Allow to load a FIT containing U-Boot from FSLokesh Vutla2016-05-27-14/+71
| | | | | | | | | | | | | This provides a way to load a FIT containing U-Boot and a selection of device tree files from a File system. Making sure that all the reads and writes are aligned to their respective needs. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Make this still apply with Michal's alignment change for 'fit'] Signed-off-by: Tom Rini <trini@konsulko.com>
* spl: fit: Fix the number of bytes read when reading fdt from fitLokesh Vutla2016-05-27-0/+1
| | | | | | | | | | | sectors field is not being updated when reading fdt from fit image. Because of this size_of(u-boot.bin) is being read when reading fdt. Fixing it by updating the sectors field properly. Tested-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* defconfig: ti: Add configs for OMAP5-class secure partsDaniel Allred2016-05-27-0/+145
| | | | | | | | | | | Adds new defconfig files for DRA7xx and AM57xx secure devices. These are the same as the non-secure parts, but with the addition of the CONFIG_TI_SECURE_DEVICE option set to 'y'. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: omap5: add ft_board_setup for dra7xx/am57xxDaniel Allred2016-05-27-0/+21
| | | | | | | | | | | | | | Adds the board specific ft_board_setup() functions that are called when CONFIG_OF_BOARD_SETUP is defined. These functions will currently just call the ft_cpu_setup() function. Adds CONFIG_OF_BOARD_SETUP to the defconfig files for dra72_evm, dra74_evm, and am57xx_evm. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: omap5: add hooks for cpu/SoC fdt fixupsDaniel Allred2016-05-27-0/+185
| | | | | | | | | | | | | | | Adds an fdt.c file in that defines the ft_cpu_setup() function, which should be called from a board-specific ft_board_setup()). This ft_cpu_setup() will currently do nothing for non-secure (GP) devices but contains pertinent updates for booting on secure (HS) devices. Update the omap5 Makefile to include the fdt.c in the build. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: omap-common: Add device type to CPU stringDaniel Allred2016-05-27-8/+32
| | | | | | | | | | | | | | Update the CPU string output so that the device type is now included as part of the CPU string that is printed as the SPL or u-boot comes up. This update adds a suffix of the form "-GP" or "-HS" for production devices, so that general purpose (GP) and high security (HS) can be distiguished. Applies to all OMAP5 variants. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: build: ti: add support for secure boot imagesDaniel Allred2016-05-27-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | Updates the SPL build so that when CONFIG_TI_SECURE_DEVICE is in use (which it should be when building for secure parts), the TI secure development package is used to create a valid secure boot image. The u-boot SPL build processes is NOT aware of the details of creating the boot image - all of that information is encapsulated in the TI secure development package, which is available from TI. More info can be found in README.ti-secure Right now, two image types are generated, MLO and X-LOADER. The types are important, as certain boot modes implemented by the device's ROM boot loader require one or the other (they are not equivalent). The output filenames are u-boot-spl_HS_MLO and u-boot-spl_HS_X-LOADER. The u-boot-spl_HS_MLO image is also copied to a file named MLO, which is the name that the device ROM bootloader requires for loading from the FAT partition of an SD card (same as on non-secure devices). Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti_omap5_common: Update SPL start address on secure partsDaniel Allred2016-05-27-5/+27
| | | | | | | | | | | | | | Updated the CONFIG_SPL_TEXT_BASE to support secure parts (moving the start address past secure reserved memory and the size of the security certificate that precedes the boot image on secure devices). Updated the related CONFIG_SPL_MAX_SIZE to properly reflect the internal memory actually available on the various device flavors (Common minimum internal RAM guaranteed for various flavors of DRA7xx/AM57xx is 512KB). Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* defconfig: Add a config for AM43xx secure partMadan Srinivas2016-05-27-0/+53
| | | | | | | | | | | | Adds a new defconfig file for the AM43xx secure device. This is the same as for the non-secure part, except for: CONFIG_TI_SECURE_DEVICE option set to 'y' CONFIG_ISW_ENTRY_ADDR updated for secure images. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: AM43xx: board: Detect AM43xx HS EVMMadan Srinivas2016-05-27-5/+17
| | | | | | | | | | | | | | | | | | | Adds code to detect AM43xx HS EVMS - the string in the I2C EEPROM for HS EVMs differs from GP EVMs. Adds code to for evm detection, regardless of whether the evm is for GP or HS parts, and updates board init to use that. Modifies findfdt command to pick up am437x-gp-evm.dtb for the HS EVMs also, as the boards are similar except for some security specific changes around power supply and enclosure protection. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: AM43xx: Use CONFIG options from SOC KconfigMadan Srinivas2016-05-27-12/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updates configs/am43xx_evm.h to use CONFIG options from SOC specific Kconfig file for various calculations. On AM43x devices, the address of SPL entry point depends on the device type, i.e. whether it is secure or non-secure. Further, for non-secure devices, the SPL entry point is different between USB HOST boot mode, other "memory" boot modes (MMC, NAND) and "peripheral" boot modes (UART, USB) To add to the complexity, on secure devices, in addition to the above differences, the SPL entry point can change because of the space occupied by other components (other than u-boot or spl) that go into a secure boot image. To prevent the user from having to modify source files every time any component of the secure image changes, the value of CONFIG_SPL_TEXT_BASE has been set using a Kconfig option that is supplied in the am43xx_*_defconfig files Using the CONFIG options also enables us to do away with some compile time flags that were used to specify CONFIG_SPL_TEXT_BASE for different boot modes. On QSPI devices, the same problem described above occurs w.r.t. the address of the u-boot entry point in flash, when booting secure devices. To handle this, CONFIG_SYS_TEXT_BASE is also setup via a Kconfig option and the defconfig files. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: AM43xx: config.mk: Add support for generating secure boot imagesDaniel Allred2016-05-27-0/+20
| | | | | | | | | | | | | | | | | | | | | Modifies the config.mk to build secure images when building the SPL for secure devices. Depending on the boot media, different images are needed for secure devices. The build generates u-boot*_HS_* files as appropriate for the different boot modes. The same u-boot binary file is processed slightly differently to produce a different boot image, depending on whether the user wants to boot off SPI, QSPI or other boot media. Refer to README.ti-secure for more information. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: omap-common: Add commands for generating secure SPL imagesDaniel Allred2016-05-27-0/+66
| | | | | | | | | | | | | | | | | | Adds a centralized config_secure.mk in omap-common for OMAP-style TI secure devices to use for boot image generation Depending on the boot media, different images are needed for secure devices. These commands generates u-boot*_HS_* files that need to be used to boot secure devices. Please refer to README.ti-secure for more information. Signed-off-by: Daniel Allred <d-allred@ti.com> Signed-off-by: Madan Srinivas <madans@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ti: omap-common: Add Kconfig file for secure device supportMadan Srinivas2016-05-27-7/+18
| | | | | | | | | | | | | | | | | | | | | | | Defines CONFIG_TI_SECURE_DEVICE which needs to be turned on when building images for secure devices. This flag is used to invoke the secure image creation tools for creating a boot image that can be used on secure devices. This flag may also be used to conditionally compile code specific to secure devices. This terminology will be used by all OMAP architecture devices, hence introducing to a common location. With the creation of Kconfig for omap-common, moved the sourcing of the Kconfig files for the omap3/4/5 and am33xx devices from arch/arm/KConfig to the omap-common one. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: Kconfig: Add support for AM43xx SoC specific KconfigMadan Srinivas2016-05-27-8/+32
| | | | | | | | | | | | | | | | | | | | | | Adding support for AM43xx secure devices require the addition of some SOC specific config options like the amount of memory used by public ROM and the address of the entry point of u-boot or SPL, as seen by the ROM code, for the image to be built correctly. This mandates the addition of am AM43xx CONFIG option and the ARM Kconfig file has been modified to source this SOC Kconfig file. Moving the TARGET_AM43XX_EVM config option to the SOC KConfig and out of the arch/arm/Kconfig. Updating defconfigs to add the CONFIG_AM43XX=y statement and removing the #define CONFIG_AM43XX from the header file. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: am33xx: Kconfig: Add secure device definitionsMadan Srinivas2016-05-27-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a new Kconfig file for AM33xx class devices. We need a common place to define CONFIG parameters for these SOCs, especially for adding support for secure devices. a) Adds a definition for ISW_ENTRY_ADDR. This is the address to which the ROM branches when the SOC ROM hands off execution to the boot loader. CONFIG_SYS_TEXT_BASE and CONFIG_SPL_TEXT_BASE are set to this value for AM43xx devices. b) Adds CONFIG_PUB_ROM_DATA_SIZE which is used to calculate CONFIG_SPL_MAX_SIZE. This value indicates the amount of memory needed by the ROM to store data during the boot process. Currently, these CONFIG options are used only by AM43xx, but in future other AM33xx class SOCs will also use them. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* doc: Add info on using secure devices from TIDaniel Allred2016-05-27-0/+91
| | | | | | | | | | | | | | | | | | | | | | | | | Adds doc/README.ti-secure file to explain in generic terms how boot images need to be created for secure devices from Texas Instruments. Specific details for creating secure boot images for the AM43xx, DRA7xx and AM57xx secure devices from Texas Instruments are also provided in the README file. Secure devices require a security development package (SECDEV) package that can be downloaded from: http://www.ti.com/mysecuresoftware Login is required and access is granted under appropriate NDA and export control restrictions. Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Daniel Allred <d-allred@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUPRobert P. J. Day2016-05-27-58/+58
| | | | | | | | | | | | | | | | Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT: config OF_BOARD_SETUP bool "Set up board-specific details in device tree before boot" depends on OF_LIBFDT ... remove superfluous tests of CONFIG_OF_LIBFDT when testing for CONFIG_OF_BOARD_SETUP. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> [trini: Typo fix: s/ifdefi/ifdef/] Signed-off-by: Tom Rini <trini@konsulko.com>
* test/py: Support setting up specific timeoutMichal Simek2016-05-27-0/+31
| | | | | | | | | | | | | | Large file transfers, flash erasing and more complicated tests requires more time to finish. Provide a way to setup specific timeout directly in test. For example description for 50s test: timeout = 50000 with u_boot_console.temporary_timeout(timeout): u_boot_console.run_command(...) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* efi_loader: gop: Don't expose fb addressAlexander Graf2016-05-27-3/+0
| | | | | | | | | | | | | | | | | | Recently Linux is gaining support for efifb on AArch64 and that support actually tries to make use of the frame buffer address we expose to it via gop. While this wouldn't be bad in theory, in practice it means a few bad things 1) We expose 16bit frame buffers as 32bit today 2) Linux can't deal with overlapping non-PCI regions between efifb and a different frame buffer driver For now, let's just disable exposure of the frame buffer address. Most OSs that get booted will have a native driver for the GPU anyway. Signed-off-by: Alexander Graf <agraf@suse.de> [trini: Remove line_len entirely] Signed-off-by: Tom Rini <trini@konsulko.com>
* efi_loader: Clean up system table on exitAlexander Graf2016-05-27-0/+16
| | | | | | | | | | | | We put the system table into our runtime services data section so that payloads may still access it after exit_boot_services. However, most fields in it are quite useless once we're in that state, so let's just patch them out. With this patch we don't get spurious warnings when running EFI binaries anymore. Signed-off-by: Alexander Graf <agraf@suse.de>
* tools/env: no global variable sharing between application and libraryAndreas Fenkart2016-05-27-55/+48
| | | | Signed-off-by: Andreas Fenkart <andreas.fenkart@digitalstrom.com>
* MARVELL: Delete now-superfluous board/Marvell/{common, include} dirs.Robert P. J. Day2016-05-27-2450/+0
| | | | | | | With dropping support for some boards and the deletion of some source files, it appears that both of these directories are now superfluous. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* Drop HAVE_GENERIC_BOARD and SYS_GENERIC_BOARD optionsSimon Glass2016-05-27-32/+0
| | | | | | | | These are no longer used. The migration is complete. Drop these options. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Angelo Dureghello <angelo@sysam.it> Acked-by: Andreas Bießmann <andreas@biessmann.org>
* Drop references to CONFIG_SYS_GENERIC_BOARD in config filesSimon Glass2016-05-27-9/+0
| | | | | | This option is no longer used so need not be enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
* Drop use of CONFIG_SYS_GENERIC_BOARD in U-BootSimon Glass2016-05-27-10/+3
| | | | | | | | This option is always enabled and is about to be removed. Drop references to it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* powerpc: Drop unused code related to generic boardSimon Glass2016-05-27-122/+1
| | | | | | Since generic board init is enabled, this is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* mips: Drop unused code in u-boot.hSimon Glass2016-05-27-16/+0
| | | | | | | Since generic board init is enabled, this is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* m68k: Drop unused code in u-boot.hSimon Glass2016-05-27-39/+0
| | | | | | | Since generic board init is enabled, this is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Angelo Dureghello <angelo@sysam.it>
* avr32: Drop unused code in u-boot.hSimon Glass2016-05-27-20/+0
| | | | | | | Since generic board init is enabled, this is not used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Andreas Bießmann <andreas@biessmann.org>
generated by cgit v1.1 at 2024-11-10 00:48:21 +0000