summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* zynq: Rename struct clk_ops to zynq_clk_opsSimon Glass2015-07-21-3/+3
| | | | | | | Since we want clk_ops to be used in U-Boot as a whole, rename the Zynq version until it can be converted to driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Add a system reset uclassSimon Glass2015-07-21-0/+135
| | | | | | | | | | | | | | | | It is common for system reset to be available at multiple levels in modern hardware. For example, an SoC may provide a reset option, and a board may provide its own reset for reasons of security or thoroughness. It is useful to be able to model this hardware without hard-coding the behaviour in the SoC or board. Also there is a distinction sometimes between resetting just the CPU (leaving GPIO state alone) and resetting all the PMICs, just cutting power. To achieve this, add a simple system reset uclass. It allows multiple devices to provide reset functionality and provides a way to walk through them, requesting a particular reset type until is it provided. Signed-off-by: Simon Glass <sjg@chromium.org>
* mkimage: Set up a file size parameter and keep it updatedSimon Glass2015-07-21-0/+19
| | | | | | | | | | | Some functions called by mkimage would like to know the output file size. Initially this is the same as the input file size, but it may be affected by adding headers, etc. Add this information to the image parameters. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* spl: Add a debug string before the jump to U-BootSimon Glass2015-07-21-0/+1
| | | | | | | As a debug option, add positive confirmation that SPL has completed execution. This can help with diagnosing the location of unexpected hangs. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: spl: Allow device tree/driver model in board_init_f()Simon Glass2015-07-21-11/+37
| | | | | | | | | | | | Add an spl_init() function that does basic init such that board_init_f() can use simple malloc(), device tree and driver model. Each one is set up only if enabled for SPL. Note: We really should refactor SPL such that there is a single board_init_f() and rename the existing weak board_init_f() functions provided by boards, calling them from the single board_init_f(). Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Provide debug info when a device tree cannot be foundSimon Glass2015-07-21-0/+7
| | | | | | | It can be quite confusing with a new platform to figure out why the device tree cannot be located. Add some debug information for this case. Signed-off-by: Simon Glass <sjg@chromium.org>
* lib: Add function to extract a number from the end of a stringSimon Glass2015-07-21-8/+51
| | | | | | | Split out the code in fdtdec which finds a number at the end of a string. It can be useful in other situations. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add rivest cipher 4 (rc4) implementationSimon Glass2015-07-21-0/+71
| | | | | | | Add an implementation of RC4. This will be used by Rockchip booting but may be useful in other situations. Signed-off-by: Simon Glass <sjg@chromium.org>
* ns16550: Improve debug UART so it can work with 32-bit accessSimon Glass2015-07-21-15/+21
| | | | | | | Since Rockchip requires 32-bit serial access, add this to the driver. Refactor a little to make this easier. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: spi: Make local functions staticSimon Glass2015-07-21-4/+4
| | | | | | Several functions in this file should be marked as static. Update them. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Add support for RAM driversSimon Glass2015-07-21-0/+96
| | | | | | | | Add support for a driver which sets up DRAM and can return information about the amount of RAM available. This is a first step towards moving RAM init to driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
* Drop CONFIG_ERRNO_STR from SPLSimon Glass2015-07-21-1/+1
| | | | | | | | | This bloats the code size quite a bit and is less useful in SPL where there is no command line. Avoid including this code in SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: power: Allow use of regulators in SPLSimon Glass2015-07-21-0/+1
| | | | | | | This functionality may be useful for setting up regulators early during boot. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: pmic: Add functions to adjust PMIC registersSimon Glass2015-07-21-0/+66
| | | | | | | | | It is a common requirement to update some PMIC registers. Provide some simple convenience functions to do this. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* dm: power: Use debug() for errors in regulator uclassSimon Glass2015-07-21-1/+1
| | | | | | | | | To reduce unnecessary code size in an uncommon code path, use debug() where possible(). The driver returns an error which indicates failure. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* dm: power: Add a function to set up all regulatorsSimon Glass2015-07-21-0/+33
| | | | | | | | | The device tree provides information about which regulators should be on at boot, or always on. Use this to set them up automatically. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* dm: pmic: Split output from functionSimon Glass2015-07-21-75/+63
| | | | | | | | | | | | | | | The regulator_autoset() function mixes printf() output and PMIC adjustment code. It provides a boolean to control the output. It is better to avoid missing logic and output, and this permits a smaller SPL code size. So split the output into a separate function. Also rename the function to have a by_name() suffix, since we would like to be able to pass a device when we know it, and thus avoid the name search. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* dm: power: Add regulator flags to centralise auto-set logicSimon Glass2015-07-21-0/+20
| | | | | | | | | Decide when the regulator is set up whether we want to auto-set the voltage or current. This avoids the complex logic spilling into the processing code. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* dm: power: Avoid case-insensitve match for child namesSimon Glass2015-07-21-1/+1
| | | | | | | | | | This is not user input (i.e. from the command line). It should be possible to get the case correct and avoid the case-insensitive match. This will help avoid sloppy device tree setups. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
* mmc: Add structure comments for dwmmcSimon Glass2015-07-21-1/+17
| | | | | | | It took a little while to figure this out, so this patch adds documentation to help the next person who needs to do this. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: mmc: Allow driver model to be used for MMC in SPLSimon Glass2015-07-21-2/+15
| | | | | | Enable MMC using driver model in SPL for consistency with U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org>
* mmc: Add debug() output on read errorsSimon Glass2015-07-21-2/+6
| | | | | | Allow read errors to be diagnosed more easily. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: mmc: Add an MMC uclassSimon Glass2015-07-21-0/+71
| | | | | | | Add basic support for MMC, providing a uclass which can set up an MMC device. This allows MMC drivers to move to using driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
* spl: Add debugging info for spl_mmc bootSimon Glass2015-07-21-2/+7
| | | | | | Add a few messages to indicate progress and failure. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: led: Add a driver for GPIO-controlled LEDsSimon Glass2015-07-21-0/+163
| | | | | | | Add a simple driver which allows use of LEDs attached to GPIOs. The linux device tree binding is used. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Add support for LEDsSimon Glass2015-07-21-0/+152
| | | | | | | | | Add a simple uclass for LEDs, so that these can be controlled by the device tree and activated when needed. LEDs are referred to by their label. This implementation requires a driver for each type of LED (e.g GPIO, I2C). Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Add support for generic system controllers (syscon)Simon Glass2015-07-21-0/+131
| | | | | | | | | | | Many SoCs have a number of system controllers which are dealt with as a group by a single driver. It is a pain to have to add lots of compatible strings and/or separate drivers for each. Instead we can identify the controllers by a number and request the address of the one we want. Add a simple implementation of this which can be used by SoC driver code. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Add support for register maps (regmap)Simon Glass2015-07-21-0/+159
| | | | | | | | | | | Add a simple implementaton of register maps, supporting only direct I/O for now. This can be enhanced later to support buses which have registers, such as I2C, SPI and PCI. It allows drivers which can operate with multiple buses to avoid dealing with the particulars of register access on that bus. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Add dm_gpio_request() to manually request a GPIOSimon Glass2015-07-21-1/+13
| | | | | | | This function can be used for testing to manually request a GPIO for use, without resorting to the legacy GPIO API. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Add dm_gpio_lookup_name() to look up a GPIO nameSimon Glass2015-07-21-8/+39
| | | | | | | Provide a driver-model function to look up a GPIO name. Make the standard function use it. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: gpio: Allow GPIO uclass to be used in SPLSimon Glass2015-07-21-4/+0
| | | | | | | Now that we support driver model in SPL, allow GPIO drivers to be used there also. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: core: Correct device_get_child_by_of_offset() parameterSimon Glass2015-07-21-3/+3
| | | | | | This parameter is named 'seq' but should be named 'of_offset'. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: core: Add a function to find any device from device treeSimon Glass2015-07-21-0/+39
| | | | | | | | | | | | In some rare cases it is useful to be able to locate a device given a device tree node offset. An example is when you have an alias that points to a node and you want to find the associated device. The device may be SPI, MMC or something else, but you don't need to know the uclass to find it. Add a function to do a global search for a device, given its device tree offset. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: core: Use debug() instead of printf() for failuresSimon Glass2015-07-21-3/+3
| | | | | | | | To avoid bloating SPL code, use debug() where possible in the driver model core code. The error code is already returned, and can be investigated as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Move the tree/uclass dump code into its own fileSimon Glass2015-07-21-79/+106
| | | | | | | | | | In SPL it is sometimes useful to be able to obtain a dump of the current driver model state. Since commands are not available, provide a way to directly call the functions to output this information. Adjust the existing commands to use these functions. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Drop special-case sandbox console codeSimon Glass2015-07-21-5/+1
| | | | | | | | | At present printf() skips output if it can see there is no console. This is really just an optimisation, and is not necessary. Also it is currently incorrect in some cases. Rather than update the logic, just remove it so that we don't need to keep it in sync. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Allow debug UART to support an early consoleSimon Glass2015-07-21-0/+19
| | | | | | | When there is no console ready, allow the debug UART to be used for output. This makes debugging of early code considerably easier. Signed-off-by: Simon Glass <sjg@chromium.org>
* debug_uart: Remove use of asmlinkageSimon Glass2015-07-21-12/+10
| | | | | | | This does not actually help any current arch. For x86 it makes it harder to call (requires stack) and for ARM it has no effect. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add a way of checking the position of a structure memberSimon Glass2015-07-21-0/+11
| | | | | | | | | | | | U-Boot uses structures for hardware access so it is important that these structures are correct. Add a way of asserting that a structure member is at a particular offset. This can be created using the datasheet for the hardware. This implementation uses Static_assert() since BUILD_BUG_ON() only works within functions. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: arm: Put driver model I2C drivers before legacy onesSimon Glass2015-07-21-5/+5
| | | | | | | | | | Driver-model I2C drivers can be picked up by the linker script rule for legacy drivers. Change the order to avoid this. We could make the legacy code depend on !CONFIG_DM_I2C but that is not necessary and it is good to keep conditions to a minimum. Signed-off-by: Simon Glass <sjg@chromium.org>
* dm: Reduce SPL device tree sizeSimon Glass2015-07-21-2/+42
| | | | | | | | | The SPL device tree size must be minimised to save memory. Only include properties that are needed by SPL - this is determined by the presence of the "u-boot,dm-pre-reloc" property. Also remove a predefined list of unused properties from the nodes that remain. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Add fdtgrep toolSimon Glass2015-07-21-1/+1239
| | | | | | | | | | | | | | | | | | | | | | | | This tool allows us to extract subsets of a device tree file. It is used by the SPL vuild, which needs to cut down the device tree size for use in limited memory. This tool was originally written for libfdt but it has not been accepted upstream, so for now, include it in U-Boot. Several utilfdt library functions been included inline here. If fdtgrep is eventually accepted in libfdt then we can bring that version of libfdt in here, and drop fdtgrep (requiring that fdtgrep is provided by the user). If it is not accepted then another approach would be to write a special tool for chopping down device tree files for SPL. While it would use the same libfdt support, it would be less code than fdtgrep.c because it would not have general-purpose functions. Another approach (which was used with v1 of this series) is to sprinkler all the device tree files with #ifdef. I don't like that idea. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Add fdt_first/next_region() functionsSimon Glass2015-07-21-2/+731
| | | | | | | | These have been sent upstream but not accepted to libfdt. For now, bring these into U-Boot to enable fdtgrep to operate. We will use fdtgrep to cut device tree files down for SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
* fdt: Add a function to remove unused strings from a device treeSimon Glass2015-07-21-0/+49
| | | | | | | | | | | | Property names are stored in a string table. When a node property is removed, the string table is not updated since other nodes may have a property with the same name. Thus it is possible for the string table to build up a number of unused strings. Add a function to remove these. This works by building a new device tree from the old one, adding strings one by one as needed. Signed-off-by: Simon Glass <sjg@chromium.org>
* mkimage: Display a better list of available image typesSimon Glass2015-07-21-33/+95
| | | | | | | | | | | Offer to display the available image types in help. Also, rather than hacking the genimg_get_type_id() function to display a list of types, do this in the tool. Also, sort the list. The list of image types is quite long, and hard to discover. Print it out when we show help information. Signed-off-by: Simon Glass <sjg@chromium.org>
* sandbox: Enable dhry commandSimon Glass2015-07-21-0/+1
| | | | | | Provide access to the dhrystone benchmark command. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add a dhrystone benchmark commandSimon Glass2015-07-21-0/+1132
| | | | | | | | | | Drystone provides a convenient sanity check that the CPU is running at full speed. Add this as a command which can be enabled as needed. Note: I investigated using Coremark for this but there was a license agreement and I could not work out if it was GPL-compatible. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-07-20-377/+1673
|\
| * armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup.Zhichun Hua2015-07-20-15/+8
| | | | | | | | | | | | | | | | When final MMU table is setup in DDR, TCR attributes must match those of the memroy for cacheability and shareability. Signed-off-by: Zhichun Hua <zhichun.hua@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * armv8: Fix TCR macros for shareability attributeZhichun Hua2015-07-20-2/+2
| | | | | | | | | | | | | | | | For ARMv8, outer shareable is 0b10, inner shareable is 0b11 at bit position [13:12] of TCR_ELx register. Signed-off-by: Zhichun Hua <zhichun.hua@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-12-22 22:33:24 +0000