summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sunxi: Enable USB host support for Sinlinx SinA33Chen-Yu Tsai2016-09-18-0/+1
| | | | | | | | | Sinlinx SinA33 has 1 USB host port. Enable EHCI_HCD support for it. Also enable USB mass storage support so we can access USB sticks. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add mmc0 card detect pin for Sinlinx SinA33Chen-Yu Tsai2016-09-18-0/+1
| | | | | | | | Sinlinx SinA33 uses PB4 for mmc0 card detect. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Add defconfig and dts for the NanoPi NEOJelle van der Waa2016-09-18-1/+148
| | | | | | | | | The NanoPi NEO is a simple h3 board with 512MB RAM, ethernet, one usb and one usb OTG connector. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: musb: Re-init musb controller on repeated probe callsHans de Goede2016-09-18-9/+11
| | | | | | | | | | | | | | | | | | | | | | | With sunxi-musb musb_lowlevel_init() can fail when a charger; or no cable is plugged into the otg port. To avoid leaking the struct musb allocated by musb_init_controller() on repeated musb_usb_probe() calls, we were caching its result. But musb_init_controller() does more, such as calling sunxi_musb_init() which enables the clocks. Not calling sunxi_musb_init() causes the musb controller to stop working after a "usb reset" since that calls musb_usb_remove() which disables the clocks. This commit fixes this by removing the caching of the struct returned from musb_init_controller(), it replaces this by free-ing the allocated memory in musb_usb_remove() and calling musb_usb_remove() on musb_usb_probe() errors to ensure proper cleanup. While at it also make musb_usb_probe() and musb_usb_remove() static. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: musb: Power off OTG port VBUS when disabledChen-Yu Tsai2016-09-17-24/+12
| | | | | | | | | | | | | | The Linux kernel musb driver expects VBUS to be off while initializing musb. Having it on results in a repeating string of warnings, followed by an unusable peripheral. The peripheral is only usable after physically removing the OTG adapter, letting musb reset its state. This partially reverts commit c9f8947e6604 ("sunxi: usb-phy: Never power off the usb ports") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: axp2xx: disable ldoio0/1 at bootHans de Goede2016-09-17-0/+28
| | | | | | | | | | When cold-booting the ldoio0/1 regulators are always off / the gpios are always at tristate. But when re-booting from android these are sometimes on. Disable them at axp_init time (iow as early as possible) to remove this difference between a cold boot and a reboot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* Prepare v2016.09Tom Rini2016-09-12-1/+1
| | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* sf: fix sf probeCyrille Pitchen2016-09-12-1/+0
| | | | | | | | | | | | | This patch fixes the "sf probe" command. The very first SPI flash probe passes, for instance when u-boot tries to read its environment settings from a (Q)SPI memory but next "sf probe" commands fail because the flash memory node is unbound from the SPI controller children nodes. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Stefan Roese <sr@denx.de> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at> Reviewed-by: Simon Glass <sjg@chromium.org>
* common, kconfig: move VERSION_VARIABLE to KconfigHeiko Schocher2016-09-09-73/+222
| | | | | | | move VERSION_VARIABLE from board config file into a Kconfig option. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-09-09-46/+49
|\
| * net: asix: Fix AX88772B when used with DriverModelJoshua Scott2016-09-09-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A previous patch (net: asix: fix operation without eeprom) added a two-byte shift to the packet buffer when receiving a packet on the AX88772B. This shift was not included when the driver was updated to work with DriverModel. Testing on a Marvell DB-88F6820-ACM showed that the adapter was not functioning correctly (EHCI timeouts). This patch brings the two-byte shift to the DriverModel implementation of ops->recv (asix_eth_recv). Testing on the same board, we were able to TFTP a file over and confirm that the crc32 was correct. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * Revert "net: nfs: Correct the reply data buffer size"Joe Hershberger2016-09-09-1/+1
| | | | | | | | | | | | | | | | | | This reverts commit 6279b49e6c2fdaf8665355d1777bc90cd41fcf90. This caused a bad data crc. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Guillaume GARDET <guillaume.gardet@free.fr>
| * Revert "net: nfs: Use the tx buffer to construct rpc msgs"Joe Hershberger2016-09-09-45/+43
| | | | | | | | | | | | | | | | | | This reverts commit 998372b4798fd7ebb666f571950df925b8d80f69. This caused a data abort on some platform. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reported-by: Guillaume GARDET <guillaume.gardet@free.fr>
* | cmd: Rework disk.c usageTom Rini2016-09-09-7/+3
| | | | | | | | | | | | | | | | | | | | We only need the function found in cmd/disk.c when we have IDE, SCSI or USB_STORAGE enabled. While the first two are easy to get right, in the 3rd case we assume that the set of cases where we do have USB and do not enable USB_STORAGE are small enough that we can take the small bloat of un-discarded strings on gcc prior to 6.x Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Migrate CONFIG_USB_STORAGETom Rini2016-09-09-235/+1052
| | | | | | | | | | | | | | In some cases we were missing CONFIG_USB=y so enable that when needed. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Resync with savedefconfigTom Rini2016-09-09-549/+392
|/ | | | Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-09-09-56/+1576
|\
| * warp7: Print secure/non-secure mode infoFabio Estevam2016-09-06-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | warp7 has two targets: - warp7_defconfig: boots in non-secure mode - warp7_secure_defconfig: boots in secure mode Print the mode that is being used to help users to easily identify which target is running on the board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: Use PARTUUID to specify the rootfs locationFabio Estevam2016-09-06-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | warp7 can run different kernel versions, such as NXP 4.1 or mainline. Currently the rootfs location is passed via mmcblk number and the problem with this approach is that the mmcblk number for the eMMC changes depending on the kernel version. In order to avoid such issue, use UUID method to specify the rootfs location. Succesfully tested booting a NXP 4.1 and also a mainline kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: Add a secure mode targetFabio Estevam2016-09-06-0/+36
| | | | | | | | | | | | | | NXP kernel expects to boot in secure mode, so introduce warp7_secure_defconfig target which selects CONFIG_ARMV7_BOOT_SEC_DEFAULT. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx6ul_14x14_ev: Enable the CCGR clocks earlierFabio Estevam2016-09-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | To be in the safe side we need to enable the CCGR clocks prior to calling arch_cpu_init(). Inspired by Tim Harvey's commit d783c2744f9 ("imx: ventana: fix boot to SD"). Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Eric Nelson <eric@nelint.com> Tested-by: Eric Nelson <eric@nelint.com>
| * mx6ul_14x14_evk: Adjust SPL DDR3 settingsFabio Estevam2016-09-06-7/+7
| | | | | | | | | | | | | | | | Adjust DDR3 initialization done in SPL by comparing them against the NXP DCD table. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Eric Nelson <eric@nelint.com>
| * mx6ul_14x14_evk: Pass refsel and refr fields to avoid hangFabio Estevam2016-09-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running a NXP 4.1 kernel with U-Boot mainline on a mx6ul-evk, we observe a hang when going into the lowest operational point of cpufreq. This hang issue does not happen on the NXP U-Boot version. After comparing the SPL DDR initialization against the DCD table from NXP U-Boot, the key difference that causes the hang is the MDREF register setting: DATA 4 0x021B0020 0x00000800 ,which means: REF_SEL = 0 --> Periodic refresh cycle: 64kHz REFR = 1 ---> Refresh Rate - 2 refreshes So adjust the MDREF initialization for mx6ul_evk accordingly to fix the kernel hang issue at low bus frequency. Reported-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Eric Nelson <eric@nelint.com>
| * mx6: ddr: Allow changing REFSEL and REFR fieldsFabio Estevam2016-09-06-4/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently MX6 SPL DDR initialization hardcodes the REF_SEL and REFR fields of the MDREF register as 1 and 7, respectively for DDR3 and 0 and 3 for LPDDR2. Looking at the MDREF initialization done via DCD we see that boards do need to initialize these fields differently: $ git grep 0x021b0020 board/ board/bachmann/ot1200/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/ccv/xpress/imximage.cfg:DATA 4 0x021b0020 0x00000800 /* MMDC0_MDREF */ board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x7800 board/freescale/mx6qarm2/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qarm2/imximage_mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6dl.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6qsabreauto/mx6qp.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6dlsabresd.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg:DATA 4 0x021b0020 0x00005800 board/freescale/mx6slevk/imximage.cfg:DATA 4 0x021b0020 0x00001800 board/freescale/mx6sxsabreauto/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/freescale/mx6sxsabresd/imximage.cfg:DATA 4 0x021b0020 0x00000800 board/warp/imximage.cfg:DATA 4 0x021b0020 0x00001800 So introduce a mechanism for users to be able to configure REFSEL and REFR fields as needed. Keep all the mx6 SPL users in their current REF_SEL and REFR values, so no functional changes for the existing users. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Eric Nelson <eric@nelint.com>
| * mx7dsabresd: Directly write to register LDOGCTLFabio Estevam2016-09-06-3/+1
| | | | | | | | | | | | | | | | | | Register LDOGCTL contains only bit 0 as a valid bit, so there is no need to do a read-modify-write operation. Simplify the code by writing directly to this register. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx7dsabresd: Directly write to register LDOGCTLFabio Estevam2016-09-06-3/+1
| | | | | | | | | | | | | | | | | | Register LDOGCTL contains only bit 0 as a valid bit, so there is no need to do a read-modify-write operation. Simplify the code by writing directly to this register. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * pico-imx6ul: Directly write to register LDOGCTLFabio Estevam2016-09-06-3/+1
| | | | | | | | | | | | | | | | | | Register LDOGCTL contains only bit 0 as a valid bit, so there is no need to do a read-modify-write operation. Simplify the code by writing directly to this register. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * ARM: board: cm_fx6: fix mtd partition fixupChristopher Spinrath2016-09-06-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ft_board_setup may return early in the case that the board revision cannot be obtained. In that case it is assumed that no revision specific correction in the fdt is neccessary. But the mtd partitions will not be fixed up either altough they are not revision specific. Move the call to fdt_fixup_mtdparts in front of the revision specific part to ensure that the partitions are fixed up even if the board revision cannot be obtained. While on it, fix a spelling mistake in a comment introduced by the same commit. Fixes: 62d6bac66038 ("ARM: board: cm_fx6: fixup mtd partitions in the fdt") Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Nikita Kiryanov <nikita@compulab.co.il>
| * mx6ul_14x14_evk: don't use array for SD2 card detect padEric Nelson2016-09-06-14/+10
| | | | | | | | | | | | | | | | | | Only a single pad is changed to change sdhc2_dat3 from an SDIO pin to and from GPIO4:5, so remove the array and use the imx_iomux_v3_setup_pad() routine. Signed-off-by: Eric Nelson <eric@nelint.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp7: Modify fdt_file environment variableBreno Lima2016-09-06-1/+1
| | | | | | | | | | | | | | | | Use imx7s-warp.dts as fdt_file because this is the name that upstream kernel will deploy. Signed-off-by: Breno Lima <breno.lima@nxp.com> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
| * warp: Fix RAM size runtime detectionFabio Estevam2016-09-06-1/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit a13d3757f7df ("warp: Use imx_ddr_size() for calculating the DDR size") warp board no longer boots. The reason for the breakage is that the warp board is using the DDR configuration from mx6slevk. A fundamental difference between warp and mx6slevk is that warp only uses one DDR chip select while mx6slevk uses two. The imx_ddr() function calculates the RAM size in runtime by reading the values of registers MDCTL and MDMISC. So in order to fix this warp boot issue, create a imximage DDR file specific to warp, where the MDCTL register is configured to only activates a single chip select. Reported-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Breno Lima <breno.lima@nxp.com>
| * warp7: Add PMIC supportVanessa Maegima2016-09-06-0/+69
| | | | | | | | | | | | | | | | Add PMIC support. Tested by command "pmic PFUZE3000 dump". Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * arm: imx: Add support for Advantech DMS-BA16 boardAkshay Bhat2016-09-06-0/+1244
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Advantech DMS-BA16 board. The board is based on Advantech BA16 module which has a i.MX6D processor. The board supports: - FEC Ethernet - USB Ports - SDHC and MMC boot - SPI NOR - LVDS and HDMI display Basic information about the module: - Module manufacturer: Advantech - CPU: Freescale ARM Cortex-A9 i.MX6D - SPECS: Up to 2GB Onboard DDR3 Memory; Up to 16GB Onboard eMMC NAND Flash Supports OpenGL ES 2.0 and OpenVG 1.1 HDMI, 24-bit LVDS 1x UART, 2x I2C, 8x GPIO, 4x Host USB 2.0 port, 1x USB OTG port, 1x micro SD (SDHC),1x SDIO, 1x SATA II, 1x 10/100/1000 Mbps Ethernet, 1x PCIe X1 Gen2 Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Cc: u-boot@lists.denx.de Cc: sbabic@denx.de
| * mx7dsabresd: Print secure/non-secure mode infoFabio Estevam2016-09-06-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | mx7dsabresd has two targets: - mx7dsabresd_defconfig: boots in non-secure mode - mx7dsabresd_secure_defconfig: boots in secure mode Print the mode that is being used to help users to easily identify which target is running on the board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mtd: nand: mxs: fix cache alignment for cache lines >32Stefan Agner2016-09-06-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently the command buffer gets allocated with a size of 32 bytes. This causes warning messages on systems with cache lines bigger than 32 bytes: CACHE: Misaligned operation at range [9df17a00, 9df17a20] Define command buffer to be at least 32 bytes, but more if cache line is bigger. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: enable splashscreen supportTim Harvey2016-09-06-3/+4
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * board: tbs2910: fix HDMI pre-console bufferSoeren Moch2016-09-06-1/+3
| | | | | | | | | | | | | | HDMI output must be enabled very early to also enable the pre-console buffer Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * board: tbs2910: always enable usbkbdSoeren Moch2016-09-06-7/+6
| | | | | | | | | | | | | | 'usb start' is much faster now, so always enable usb keyboard Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | board: ks2: README: Update to add K2G supportLokesh Vutla2016-09-07-10/+30
| | | | | | | | | | | | | | | | | | | | | | Update the README to add support for K2G EVM. Also - Add steps on how to use MMC boot - Fix load address when using CCS - Update build target to u-boot.bin from u-boot-dtb.bin as all ks2 platforms uses DT. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | efi_loader: provide efi_mem_desc versionMian Yousaf Kaukab2016-09-07-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Provide version of struct efi_mem_desc in efi_get_memory_map(). EFI_BOOT_SERVICES.GetMemoryMap() in UEFI specification v2.6 defines memory descriptor version to 1. Linux kernel also expects descriptor version to be 1 and prints following warning during boot if its not: Unexpected EFI_MEMORY_DESCRIPTOR version 0 Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@gmail.com>
* | image-fit: switch ENOLINK to ENOENTJonathan Gray2016-09-07-1/+1
| | | | | | | | | | | | | | ENOLINK is not required by POSIX and does not exist on OpenBSD and likely other systems. Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
* | compiler.h: use system endian macros on OpenBSDJonathan Gray2016-09-07-2/+17
| | | | | | | | | | | | | | The u-boot endian macros map directly to system endian macros on OpenBSD. Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
* | board: am57xx: Fix missing check for beagle_x15Nishanth Menon2016-09-07-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | When beagleboard-X15 is booted, we see the following log: Unidentified board claims BBRDX15_ in eeprom header This is because of the missing check for x15 (the default) and reports an error for a valid board configuration. Fix the same. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
* | board: am57xx: MAINTAINERS: Update for current maintainerNishanth Menon2016-09-07-1/+2
| | | | | | | | | | | | | | | | | | | | Felipe Balbi has move on from TI and the current email ID is no longer valid. So, replacing with Lokesh. While at it, update missing config file which was untracked. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | global_data.h: Standardize tabs and alignment for commentsRobert P. J. Day2016-09-07-18/+17
| | | | | | | | | | | | Line up comments for readibility. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* | pxe: Modify README to add the description about FIT imageWenbin Song2016-09-07-6/+6
| | | | | | | | | | | | | | | | Use environment variable "kernel_addr_r" to indicate the location in RAM where FIT image will be stored. Use label command "kernel" to indicate which <path> the FIT image at. Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
* | pxe: Fix pxe boot with FIT imageYork Sun2016-09-07-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When FIT image is used, a single image provides kernel, device tree and optionally ramdisk. Argc and argv need to be adjusted to support this. Test cases: 1. Booting with legacy images 2. Booting with legacy images without initrd 3. Booting with FIT image Test commands: 1. pxe get && pxe boot 2. sysboot Signed-off-by: York Sun <york.sun@nxp.com> Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
* | common/Kconfig: Fix various innocuous typos.Robert P. J. Day2016-09-07-11/+11
| | | | | | | | | | | | Correct a small number of spelling mistakes. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
* | omap3_pandora: Only set bootargs if distro_bootcmd failed to load.Vagrant Cascadian2016-09-07-1/+2
| | | | | | | | | | | | | | | | As bootargs is hard-coded for the default behavior on the omap3_pandora, only set the bootargs if distro_bootcmd fails to load. This leaves distro_bootcmd free to use alternate boot arguments. Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
* | omap3_pandora: Switch to use config_distro_bootcmd.Vagrant Cascadian2016-09-07-6/+14
| | | | | | | | | | | | | | Add support for using distro_bootcmd to the omap3_pandora target, falling back to prior behavior. Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
generated by cgit v1.1 at 2024-11-09 06:58:36 +0000