summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* tegra: gpio: fix null label regressionMarcel Ziswiler2014-10-22-0/+3
| | | | | | | | | | | | | | | | Fix Tegra GPIO driver to not crash resp. misbehave upon requesting GPIOs with an empty aka NULL label. As the driver uses exclusively the label to check for reservation status actually supplying one is mandatory! This fixes a regression introduced by commit: 2fccd2d96badcdf6165658a99771a4c475586279 tegra: Convert tegra GPIO driver to use driver model Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* mmc: Tegra: Fix timeout issue seen on certain eMMC partsMarcel Ziswiler2014-10-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | During rigorous testing of our latest update infrastructure I came across quite consistent timeouts on certain eMMC parts (e.g. Hynix H26M21001ECR) when writing big (e.g. in excess of 400 MB) file system images: MMC write: dev # 0, block # 40960, count 944128 ... mmc_send_cmd_bounced: MMC Timeout Interrupt status 0x00000001 Interrupt status enable 0xdfff003b Interrupt signal enable 0xdfff0002 Present status 0x01870106 mmc write failed Comparing the various data sheets I came across the following timeout specification: Secure Erase/TRIM Timeout=300ms*2*10=6000ms Unfortunately empirical testing still failed albeit much more rarely. Increasing the timeout to 8000ms made it finally disappear entirely. This patch allows us writing various eMMC parts without seeing any further issues. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: tegra: use architecture specific memcpyMarcel Ziswiler2014-10-22-0/+2
| | | | | | | | Use architecture specific memcpy to speed up things. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: tegra: initial support for apalis t30Marcel Ziswiler2014-10-22-0/+866
| | | | | | | | | | | | | | | | | | | | | This patch adds board support for the Toradex Apalis T30 a computer on module which can be used on different carrier boards. For the sake of ease of use we do not distinguish between different carrier boards for now as the base module features are deemed sufficient enough for regular booting. The following functionality is working so far: - eMMC boot and environment storage - Gigabit Ethernet (once Thierry's PCIe as well as my E1000 resp. i210 fixes hit mainline) - MMC/SD cards (both 8-bit as well as 4-bit slot) - USB client/host (dual role port as client e.g. for DFU/UMS, other two ports as host) Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tablesStephen Warren2014-10-22-0/+5
| | | | | | | | | | This pinmux tables currently omit any configuration for PCIe clk_req, wake, and rst pins, which in turn causes intermittent failures in U-Boot's PCIe support. Import an updated version of the pinmux tables which rectifies this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'u-boot-socfpga/topic/arm/socfpga-20141010' into ↵Albert ARIBAUD2014-10-11-1/+8
|\ | | | | | | 'u-boot-arm/master'
| * arm: socfpga: Use EMAC1 on SoCDKMarek Vasut2014-10-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The SoCDK uses EMAC1, not EMAC0. This patch fixes the issue. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
| * arm: socfpga: add MAINTAINERS entryPavel Machek2014-10-11-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add MAINTAINERS entry. Signed-off-by: Pavel Machek <pavel@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
* | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-10-11-12267/+2816
|\ \ | |/
| * Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2014-10-10-2/+10
| |\
| | * mtd: denali: support NAND_CMD_RNDOUT commandMasahiro Yamada2014-10-09-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function nand_flash_detect_ext_param_page() requires NAND_CMD_RNDOUT command supported. It is necessary to detect some types of ONFi-compliant devices. Without it, the error message "unsupported command received 0x5" is shown. Let's support this command on the Denali NAND controller driver. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Chin Liang See <clsee@altera.com>
| | * mtd: denali: fix NAND_CMD_PARAM commandMasahiro Yamada2014-10-09-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NAND_CMD_PARAM (0xEC) command is not working on the Denali NAND controller driver. Unlike NAND_CMD_READID (0x90), when the NAND_CMD_PARAM command is followed by an address cycle, the target device goes busy. (R/B# is deasserted) Wait until the parameter data are ready. In addition, unnecessary clear_interrupts() should be removed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Chin Liang See <clsee@altera.com>
| * | am335x_evm: Correct BOOTCOUNT driver supportTom Rini2014-10-10-0/+1
| | | | | | | | | | | | | | | | | | We need to set the 'BE' flag here for things to work right. Signed-off-by: Tom Rini <trini@ti.com>
| * | common/board_r: remove warning in initr_mem for 64-bit phys_size_tValentin Longchamp2014-10-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Since on powerpc phys_size_t can be unsigned long long, this printout line can result in a not nice compile warning. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | board/BuR: fix pinmux for MII Ethernet InterfaceHannes Petermaier2014-10-10-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The lines COL (collision detect) and CRS (carrier sense) needs to be connected and muxed to the CPSW MAC for a proper function in half-duplex Mode of the interface. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at> Cc: Tom Rini <trini@ti.com>
| * | scripts/multiconfig.sh: Fix a typoYork Sun2014-10-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Fix the spelling of "configs". Signed-off-by: York Sun <yorksun@freescale.com> CC: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | multiconfig.sh: replace GNU sed specific matchJeroen Hofstee2014-10-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A SPL/TPL enabled target would was not recognized as such by BSD sed, since it relies on a GNU extension. Instead of or-ing just spell out both matches. Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | VCMA9: remove EXT2 supportDavid Müller (ELSOFT AG)2014-10-10-1/+0
| | | | | | | | | | | | | | | | | | | | | remove the seldomly used EXT2 support because the U-Boot binary will not fit into the 512KiB flash otherwise. Signed-off-by: David Müller <d.mueller@elsoft.ch>
| * | PATI: fix broken SPI accessDavid Müller (ELSOFT AG)2014-10-10-0/+6
| | | | | | | | | | | | | | | | | | | | | fix broken SPI access by adding/activating BOARD_EARLY_INIT_F functionality and calling spi_init_f() from there. Signed-off-by: David Müller <d.mueller@elsoft.ch>
| * | PATI: convert to generic boardDavid Müller (ELSOFT AG)2014-10-10-0/+2
| | | | | | | | | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
| * | VCMA9: convert to generic boardDavid Müller (ELSOFT AG)2014-10-10-0/+2
| | | | | | | | | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
| * | MIP405: convert to generic boardDavid Müller (ELSOFT AG)2014-10-10-0/+2
| | | | | | | | | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
| * | PIP405: convert to generic boardDavid Müller (ELSOFT AG)2014-10-10-0/+2
| | | | | | | | | | | | Signed-off-by: David Müller <d.mueller@elsoft.ch>
| * | SPDX License cleanup for LiMon imported filesWolfgang Denk2014-10-10-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A number of network related files were imported from the LiMon project; these contain a somewhat unclear license statement: Copyright 1994 - 2000 Neil Russell. (See License) I analyzed the source code of LiMon v1.4.2 which was used for this import. It does not contain any "License" file, but the top level directory contains a file "COPYING", which turns out to be GPL v2 of June 1991. So it is legitimate to conclude that the LiMon derived files are also to be released under GPLv2. Mark them as such. Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | beagleboard: Remove side effects of i2c2 pullup resisters initialization codeAlexander Kochetkov2014-10-10-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix typo of commit d4e53f063dd25e071444b87303573e7440deeb89. i2c2 pullup resisters are controlled by bit 0 of CONTROL_PROG_IO1. It's value after reset is 0x00100001. In order to clear bit 0, original code write 0xfffffffe to CONTROL_PROG_IO1 and toggle almost all default values. Original code affect following: * disable i2c1 pullup resisters * increase far end load setting for many modules * setup invalid SC/LB combination Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> CC: Tom Rini <trini@ti.com> CC: Steve Kipisz <s-kipisz2@ti.com>
| * | powerpc: mpc5xxx: remove board support for MVBC_P and MVSMRMasahiro Yamada2014-10-10-1848/+2
| | | | | | | | | | | | | | | | | | These boards have been orphaned for more than 6 months. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | powerpc: mpc83xx: remove board support for MERGERBOX and MVBLM7Masahiro Yamada2014-10-10-2495/+2
| | | | | | | | | | | | | | | | | | These boards have been orphaned for more than 6 months. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | powerpc: ppc4xx: remove board support for bluestoneMasahiro Yamada2014-10-10-540/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been orphaned for more than 6 months. It is the last board defining CONFIG_APM821XX. The code inside #ifdef CONFIG_APM821XX should be removed too. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | powerpc: ppc4xx: remove board support for CRAYL1Masahiro Yamada2014-10-10-1470/+1
| | | | | | | | | | | | | | | | | | This board has been orphaned for more than 6 months. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | powerpc: ppc4xx: remove board support for KAREF and METROBOXMasahiro Yamada2014-10-10-4968/+2
| | | | | | | | | | | | | | | | | | These boards have been orphaned for more than 6 months. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
| * | kconfig: fix another bug of "make savedefconfig"Masahiro Yamada2014-10-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | In some cases, the last lines of SPL or TPL are not output to a file. The entries remaining in the "unmatched" variable must be flushed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | ARM: keystone: clock: fix main pll ratio div definitionsKhoronzhuk, Ivan2014-10-10-5/+5
| | | | | | | | | | | | | | | | | | | | | The definitions for div ratio supposed to be in hex and were added in dec by mistake. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| * | common: spl_sata: perform SCSI scan before getting deviceRoger Quadros2014-10-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | At least on OMAP, init_sata() no longer performs scsi_scan() so we must do it explicitly here. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com>
| * | ARM: OMAP5+: sata: Move scsi_scan() to the right placeRoger Quadros2014-10-10-1/+1
| | | | | | | | | | | | | | | | | | | | | scsi_scan() must be called as part of scsi_init() and not as part of sata_init(). Signed-off-by: Roger Quadros <rogerq@ti.com>
| * | OMAP5+: sata/scsi: Implement scsi_init()Roger Quadros2014-10-10-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On OMAP platforms, SATA controller provides the SCSI subsystem so implement scsi_init(). Get rid of the unnecessary sata_init() call from dra7xx-evm and omap5-uevm board files. Signed-off-by: Roger Quadros <rogerq@ti.com>
| * | ahci: Don't start command DMA engine before buffers are setRoger Quadros2014-10-10-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA/FIS buffers are set in ahci_port_start() which is called after ahci_host_init(). So don't start the DMA engine here (i.e. don't set FIS_RX) This fixes the following error at kernel boot on OMAP platforms (e.g. DRA7x) WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x358() 44000000.ocp:L3 Custom Error: MASTER SATA TARGET GPMC (Idle): Data Access in User mode during Functional access Signed-off-by: Roger Quadros <rogerq@ti.com>
| * | omap3: overo: Fix fdtfile testStefan Herbrechtsmeier2014-10-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 12cc54376768461533b55ada1b0b6d4979f40579 'omap3: overo: Select fdtfile for expansion board' wrongly missed the operator in the fdtfile test. Update the test to only overwrite an empty fdtfile environment variable. Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
| * | common/board_r: Fix booting issue on T4240QDSYork Sun2014-10-10-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 294b91a5817147d4b7f47be2ac69bac2a1f26491 moved initr_malloc earlier than initr_unlock_ram_in_cache. This causes issue on T4240. It may be related to locked L1 d-cache and unlocked L2 cache. D- cache could and should be unlock earlier for normal operation. This patch moves initr_unlock_ram_in_cache before initr_malloc. It has been verified on the following boards, in which only T4240QDS suffered and has been since fixed: T4240QDS, T2080QDS, P5040DS, P4080DS, MPC8572DS, MPC8536DS, MPC8641HPCN, B4860QDS. Signed-off-by: York Sun <yorksun@freescale.com> CC: Scott Wood <scottwood@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
| * | pxe: Ensure we don't overflow bootargsIan Campbell2014-10-10-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a couple of platforms I've tripped over long PXE append lines overflowing this array, due to having CONFIG_SYS_CBSIZE == 256. When doing preseeded Debian installs it's pretty trivial to exceed that. Since the symptom can be a silent hang or a crash add a check. Of course the affected boards would also need an increased CBSIZE to actually work. Note that due to the printing of the final bootargs string CONFIG_SYS_PBSIZE also needs to be sufficiently large. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> [trini: Use %zd not %d in printf for all args] Signed-off-by: Tom Rini <trini@ti.com>
| * | sunxi: Fix gmac not working reliable on the BananapiHans de Goede2014-10-08-0/+9
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order for the gmac nic to work reliable on the Bananapi, we need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" of the GMAC clk register (0x01c20164) to 3. Without this about 9 out of 10 ethernet packets get lost, with this setting there is no packet loss. So far setting these bits is only necessary on the Bananapi, so this commit solves this with a bit of #ifdef CONFIG_BANANAPI code. If in the future we need to do something similar for other boards, we can create a specific CONFIG_FOO option for this then. Reported-by: Karsten Merker <merker@debian.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Karsten Merker <merker@debian.org> Tested-by: Zoltan HERPAI <wigyori@openwrt.org> Tested-by: Tony Zhang <tony.zhang@lemaker.org> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-10-07-74/+5675
| |\
| * | Prepare v2014.10-rc3Tom Rini2014-10-06-1/+1
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini2014-10-06-86/+117
| |\ \
| | * | usb: gadget: fastboot: terminate commands with NULLEric Nelson2014-10-06-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without NULL termination, various commands will read past the end of input. In particular, this was noticed with error() calls in cb_getvar and simple_strtoul() in cb_download. Since the download callback happens elsewhere, the 4k buffer should always be sufficient to handle command arguments. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | usb: musb-new: core: set MUSB_POWER_HSENAB in MUSB_POWER for host modeDaniel Mack2014-10-06-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bit allows the MUSB controller to negotiate for high-speed mode when the device is reset by the hub. If unset, Babble errors occur with high-speed mass storage devices right after the first packet. This condition is not caught by the interrupt handles in U-Boot, so no recovery is done, and the USB communication is stuck. To fix this, set the bit unconditionally, not only for CONFIG_USB_GADGET_DUALSPEED but also for host-only modes. Signed-off-by: Daniel Mack <zonque@gmail.com>
| | * | usb: tegra: ULPI regression on tegra20Marcel Ziswiler2014-10-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trying to enumerate USB devices connected via ULPI to T20 failed as follows: USB2: ULPI integrity check failed Git bisecting revealed the following commit being at odds: commit 2d34151f7501ddaa599897f0d89ad576126b03eb usb: tegra: refactor PHY type selection Looking at above commit one quickly identifies a copy paste error which this patch fixes. Happy ULPIing again (;-p). Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
| | * | usb: gadget: fastboot: explicitly set radix of maximum download sizeEric Nelson2014-10-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The processing of the max-download-size variable requires a radix specifier, or the fastboot host tool will interpret it as an octal number. See function get_target_sparse_limit() in file fastboot/fastboot.c in the AOSP: https://android.googlesource.com/platform/system/core/+/master Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | usb: gadget: fastboot: add max-download-size variableEric Nelson2014-10-06-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current Android Fastboot seems to use 'max-download-size' instead of 'downloadsize' variable to indicate the maximum size of sparse segments. See function get_target_sparse_limit() in file fastboot/fastboot.c in the AOSP: https://android.googlesource.com/platform/system/core/+/master Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | usb: ci_udc: respect CONFIG_USB_GADGET_DUALSPEEDEric Nelson2014-10-06-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Force full-speed (12 Mbit/s) operation if CONFIG_USB_GADGET_DUALSPEED is not defined. The controller is capable of high-speed (480 Mbit/s) operation, but some designs may require the use of lower-speed operation. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | usb: gadget: fastboot: improve download progress barBo Shen2014-10-06-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When download is ongoing, if the actual size of one transfer is not the same as BYTES_PER_DOT, which will cause the dot won't print anymore. Then it will let the user thinking it is stuck, actually it is transfering without dot printed. So, improve the method to show the progress bar (print dot). Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-09 20:18:40 +0000