summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* sunxi: Update DRAM clock for Olimex A20 boardsStefan Mavrodiev2016-10-30-1/+1
| | | | | | | | | Originally dram clock was set to 480MHz, but this behaves unstable. To improve stability the clock is reduced to 384MHz Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: dts: Pine64: add Ethernet aliasAndre Przywara2016-10-30-0/+1
| | | | | | | | | | | The sun8i-emac driver works fine with the A64 Ethernet IP, but we are missing an alias entry to trigger the driver instantiation by U-Boot. Add the line to point U-Boot to the Ethernet DT node. This enables TFTP boot on the Pine64. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT definesMasahiro Yamada2016-10-30-5/+0
| | | | | | | | | ARCH_SUNXI selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT is not used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXIJagan Teki2016-10-30-9/+7
| | | | | | | | | | | | CONFIG_SUNXI -> CONFIG_ARCH_SUNXI and removed CONFIG_SUNIX from config_whitelist.txt Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
* configs/chromebox_panther_defconfig: Re-enable CONFIG_DM_PCITom Rini2016-10-29-0/+1
| | | | | | This was turned off by accident, re-enble. Signed-off-by: Tom Rini <trini@konsulko.com>
* MAINTAINERS: Update Jagan's emailJagan Teki2016-10-29-2/+2
| | | | Signed-off-by: Jagan Teki <jagan@openedev.com>
* travis-ci: build Tegra boardsStephen Warren2016-10-29-0/+2
| | | | | | | | | ARMv7 Tegra boards aren't currently covered by any other travis-ci jobs. Add a new job to build them. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* travis-ci: compile with buildman when running test/pyStephen Warren2016-10-29-27/+54
| | | | | | | | | | Use buildman to compile any U-Boot binary tested by test/py. This re-uses all the work done elsewhere to make buildman work within Travis-CI, in particular related to toolchain downloading and buildman config file creation. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* travis-ci: don't invoke exit on successStephen Warren2016-10-28-3/+1
| | | | | | | | Invoking exit prevents any subsequent build commands from running, and future patches will add extra commands. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* travis-ci: use buildman -P everywhereStephen Warren2016-10-28-1/+1
| | | | | | | | | | | | | | | | | | | This places build results into a board-specific directory rather than a buildman-thread-specific directory. This is required so that we can access the directory from test.py, and there's no risk of a particular build's results being over-written by another build performed by the same thread. In theory, this can lead to slower builds when building many different boards in a single buildman thread, since it removes the possibility of incremental builds between boards. In practice however I didn't notice longer build times when when enabling this option; if anything build times decreased although I suspect that's simply due to general variations in build performance across different machines within the Travis CI infra-structure. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* travis-ci: centralize ~/.buildman editingStephen Warren2016-10-28-3/+4
| | | | | | | | | | | | | | | | | | | | Any time an x86 toolchain is used, we need to edit ~/.buildman to reference it. Move the editing logic into a central place so that it doesn't have to be duplicated everywhere that uses the x86 toolchain; future patches will add additional cases where it's used. It would be nice if we could unconditionally write all of ~/.buildman at once. Unfortunately, buildman fails if any toolchain mentioned in a toolchain-prefix entry doesn't exist, even if it doesn't need to use it for the current build. The sandbox/x86 build definition currently does nothing more than edit ~/.buildman; no builds are run. Fix this by not defining a custom script for this build, and hence preventing that stanza from replacing the default script. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* travis-ci: use correct exit code on errorsStephen Warren2016-10-28-3/+4
| | | | | | | | | | | | | | | The phrase "if [ $? -ne 0 ]; then exit $?; fi" doesn't work correctly; by the time the "exit" statement runs, $? has already been over-written by the result of the [ command. Fix this by explicitly storing $? and then using that stored value in both the test and the error-case exit statement. This change also converts from textual comparison to integer comparison, since the exit code is an integer and there's no need to convert it to a string for comparison. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* travis-ci: Use = not : when writing ~/.buildmanStephen Warren2016-10-28-4/+2
| | | | | | | | | | Travis CI seems to be confused when there's a colon in an echo command, and this is currently worked around using a variable that contains the text we want to echo. Use = syntax instead so that we can remove the work-around; it's rather confusing until you find out what it's for. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* travis-ci: remove duplicate buildStephen Warren2016-10-28-2/+0
| | | | | | | There were two sub-jobs to build arm1136. Remove the duplicate. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* travis-ci: set env vars to name jobsStephen Warren2016-10-28-5/+19
| | | | | | | | | Travis CI names sub-jobs after the first environment variable that is set for a script. This doesn't produce meaningful results for any of the non- buildman jobs. Add a dummy variable to give the jobs meaningful names. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-atmelTom Rini2016-10-28-384/+795
|\
| * dm: at91: Add driver model support for the spi driverWenyou Yang2016-10-28-0/+296
| | | | | | | | | | | | | | | | | | | | Add driver model support while retaining the existing legacy code. This allows the driver to support boards that have converted to driver model as well as those that have not. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com>
| * board: sama5d2_xplained: Enable an early debug UARTWenyou Yang2016-10-28-0/+28
| | | | | | | | | | | | | | | | | | Enable an early debug UART to debug problems when an ICE or other debug mechanism is not available. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * board: sama5d2_xplained: Set 'ethaddr' got from AT24MACWenyou Yang2016-10-28-0/+57
| | | | | | | | | | | | | | | | | | If 'ethaddr' is not set, we will get the ethernet address from AT24MAC, and set it to 'ethaddr' variable. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Songjun Wu <songjun.wu@microchip.com> Reviewed-by: Andreas Bießmann <biessmann@corscience.de>
| * board: sama5d2_xplained: Clean up codeWenyou Yang2016-10-28-104/+0
| | | | | | | | | | | | | | | | | | Since the introduction of pinctrl and clk driver, and the dts file, remove unneeded the pin configurations and the clock enabling code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * board: sama5d2_xplained: Move config options to defconfigsWenyou Yang2016-10-28-27/+62
| | | | | | | | | | | | | | | | Move the config options from the include/configs/sama5d2_xplained.h to configs/sama5d2_xplained_*_defconfig. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * serial: atmel_usart: Support enable an early debug UARTWenyou Yang2016-10-28-0/+29
| | | | | | | | | | | | | | | | Add support to enable an early debug UART for debugging. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * serial: Kconfig: Add ATMEL_USART optionWenyou Yang2016-10-28-0/+7
| | | | | | | | | | | | | | | | Add ATMEL_USART option to support to enable the Atmel usart driver from Kconfig. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * mmc: atmel_sdhci: Remove unnecessary clock callingWenyou Yang2016-10-28-25/+2
| | | | | | | | | | | | | | | | Due to the peripheral and generated clock driver improvement, remove the unnecessary clock calling. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
| * usb: ehci-atmel: Remove unnecessary clock callingWenyou Yang2016-10-28-15/+0
| | | | | | | | | | | | | | | | Due to the peripheral clock driver improvement, remove the unnecessary clock calling. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * i2c: at91_i2c: Change error return -ENODEV to -EINVALWenyou Yang2016-10-28-1/+1
| | | | | | | | | | | | | | | | Change the error return value -ENODEV from to -EINVAL for more reasonable. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * i2c: at91_i2c: Remove unnecessary clock callingWenyou Yang2016-10-28-16/+0
| | | | | | | | | | | | | | | | Due to the peripheral clock driver improvement, remove the unnecessary clock calling. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Heiko Schocher <hs@denx.de>
| * gpio: atmel_pio4: Remove unnecessary clock callingWenyou Yang2016-10-28-12/+0
| | | | | | | | | | | | | | | | Due to the peripheral clock driver improvement, remove the unnecessary clock calling. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Stephen Warren <swarren@nvidia.com>
| * clk: at91: Improve the clock implementationWenyou Yang2016-10-28-89/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the peripheral clock, provide the clock ops for the clock provider, such as spi0_clk. The .of_xlate is to get the clk->id, the .enable is to enable the spi0 peripheral clock, the .get_rate is to get the clock frequency. The driver for periph32ck node is responsible for recursively binding its children as clk devices, not provide the clock ops. So do the generated clock and system clock. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Stephen Warren <swarren@nvidia.com>
| * clk: clk-uclass: Assign clk->dev before call .of_xlateWenyou Yang2016-10-28-0/+3
| | | | | | | | | | | | | | | | | | | | In order to make clk->dev available in ops->of_xlate() to get the clock ID from the 'reg' property of the clock node, assign the clk->dev before calling ops->of_xlate(). Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
| * ARM: at91/dt: sama5d2: Fix the warning from dtcWenyou Yang2016-10-28-70/+70
| | | | | | | | | | | | | | | | | | | | Fix the warning from dtc like, ---8<---- Warning (unit_address_vs_reg): Node /ahb/apb/pmc@f0014000/periph64ck/sdmmc0_hclk has a reg or ranges property, but no unit name --->8---- Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Stephen Warren <swarren@nvidia.com>
| * clk: at91: Fix at91-pmc and at91-sckc's class IDWenyou Yang2016-10-28-20/+7
| | | | | | | | | | | | | | | | | | | | | | The at91-pmc and at91-sckc aren't the clock providers, change their class ID from UCLASS_CLK to UCLASS_SIMPLE_BUS, they also don't need to bind the child nodes explicitly, the .post_bind callback of simple_bus uclass will do it for them. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * AT91: Correct misspelling of "redundent" in partition namesRobert P. J. Day2016-10-28-2/+2
| | | | | | | | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * arm, at91: add icache supportHeiko Schocher2016-10-28-6/+30
| | | | | | | | | | | | | | | | | | | | | | add at least icache support for at91 based boards. This speeds up NOR flash access on an at91sam9g15 based board from 15.2 seconds reading 8 MiB from a SPI NOR flash to 5.7 seconds. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
| * ARM: at91: clock: correct PRES offset for at91sam9x5Heiko Schocher2016-10-28-0/+6
| | | | | | | | | | | | | | | | | | on at91sam9x5 PRES offset is 4 in the PMC master clock register. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Andreas Bießmann <andreas@biessmann.org>
| * arm: at91: mpddrc: add missing MPDDRC_MD definesHeiko Schocher2016-10-28-0/+3
| | | | | | | | | | | | | | | | add missing MPDDRC_MD defines Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-10-28-116/+6265
|\ \ | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: common/Kconfig configs/dms-ba16_defconfig
| * | imx6: icorem6: Add default mtd nand partition tableJagan Teki2016-10-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | icorem6qdl> mtdparts device nand0 <nand>, # parts = 6 0: spl 0x00200000 0x00000000 0 1: uboot 0x00200000 0x00200000 0 2: env 0x00100000 0x00400000 0 3: kernel 0x00400000 0x00500000 0 4: dtb 0x00100000 0x00900000 0 5: rootfs 0x1f600000 0x00a00000 0 Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | imx6: icorem6: Enable MTD device supportJagan Teki2016-10-26-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable MTD device, partition and command support. Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | imx6: icorem6: Add NAND supportJagan Teki2016-10-26-1/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add NAND support for Engicam i.CoreM6 qdl board. Boot Log: -------- U-Boot SPL 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43) Trying to boot from NAND NAND : 512 MiB U-Boot 2016.09-rc2-30755-gd3dc581-dirty (Sep 28 2016 - 23:00:43 +0530) CPU: Freescale i.MX6SOLO rev1.3 at 792MHz CPU: Industrial temperature grade (-40C to 105C) at 55C Reset cause: WDOG Model: Engicam i.CoreM6 DualLite/Solo Starter Kit DRAM: 256 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 icorem6qdl> Cc: Scott Wood <oss@buserror.net> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | mtd: nand: Kconfig: Add NAND_MXS entryJagan Teki2016-10-26-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added kconfig for NAND_MXS driver. Cc: Scott Wood <oss@buserror.net> Cc: Simon Glass <sjg@chromium.org> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | arm: imx6q: Add devicetree support for Engicam i.CoreM6 Quad/DualJagan Teki2016-10-26-2/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.CoreM6 Quad/Dual modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DQ, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | arm: dts: imx6q: Add pinctrl definesJagan Teki2016-10-26-0/+1047
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add imx6q pinctrl defines support from Linux. Here is the last commit: "ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ" (sha1: d8c765e0d1ddbd5032c2491c82cc9660c2f0e7f2) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | arm: dts: Add devicetree for i.MX6QJagan Teki2016-10-26-0/+300
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6Q dtsi support from Linux. Here is the last commit: "ARM: dts: add gpio-ranges property to iMX GPIO controllers" (sha1: bb728d662bed0fe91b152550e640cb3f6caa972c) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | engicam: icorem6: Add DM_GPIO, DM_MMC supportJagan Teki2016-10-26-70/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DM_GPIO, DM_MMC support for u-boot and disable for SPL. Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | imx6q: icorem6: Enable pinctrl driverJagan Teki2016-10-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable imx6 pinctrl driver support for i.CoreM6. Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | arm: imx6q: Add devicetree support for Engicam i.CoreM6 DualLite/SoloJagan Teki2016-10-26-4/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.CoreM6 DualLite/Solo modules are system on module solutions manufactured by Engicam with following characteristics: CPU NXP i.MX6 DL, 800MHz RAM 1GB, 32, 64 bit, DDR3-800/1066 NAND SLC,512MB Power supply Single 5V MAX LCD RES FULLHD and more info at http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | dt-bindings: clock: imx6qdl: Add clock definesJagan Teki2016-10-26-0/+274
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add imx6qdl clock header defines support from Linux. "clk: imx: Add clock support for imx6qp" (sha1: ee36027427c769b0b9e5e205fe43aced93d6aa66) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | arm: dts: imx6dl: Add pinctrl definesJagan Teki2016-10-26-0/+1091
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add imx6dl pinctrl defines support from Linux. Here is the last commit: "ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ" (sha1: d8c765e0d1ddbd5032c2491c82cc9660c2f0e7f2) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | arm: dts: Add devicetree for i.MX6DQLJagan Teki2016-10-26-0/+1281
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6DQL dtsi support from Linux. Here is the last commit: "ARM: dts: imx6qdl: Fix SPDIF regression" (sha1: f065e9e4addd75c21bb976bb2558648bf4f61de6) Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
generated by cgit v1.1 at 2024-09-12 23:58:44 +0000