summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-onHarald Krapfenbauer2009-07-10-0/+5
| | | | | | | | The cm-bf561 module can easily hook up to the EXT-BF5xx-USB-ETH2 extender board, so add a simple example of how to do that in the board config. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: blackstamp: update spi flash settingsMike Frysinger2009-07-10-5/+4
| | | | | | | | | The latest blackstamp boards can only run the SPI flash at 15MHz before they start to crap out, so lower the max speeds accordingly. The new SPI flash also has different sector requirements, so update the environment sizes as well. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add cache_dump commandsMike Frysinger2009-07-10-0/+146
| | | | | | | A few debug-type commands used to dump the raw icache/dcache data. Useful when trying to track down cache-related bugs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* MAINTAINERS: fix sorting, remove duplicates.Wolfgang Denk2009-07-09-12/+8
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-08-23/+51
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-07-08-23/+51
| |\
| | * ppc4xx: Make pll_write globalMatthias Fuchs2009-07-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes pll_write on PPC405EP boards global and callable from C code. pll_write can be used to dynamically modify the PLB:PCI divider as it is required for 33/66 MHz pci adapters based on the 405EP. board_early_init_f() is a good place to do that (check M66EN signal and call pll_write() when it is required). Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
| | * ppc4xx: Remove compilation warning "pci_async_enabled defined but not used"Stefan Roese2009-07-08-0/+2
| | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| | * ppc4xx: Implement is_pci_host() for 405 CPUsMatthias Fuchs2009-07-08-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the is_pci_host() function in a similiar way as it is used on 440 targets. The former path with CONFIG_PCI_HOST == PCI_HOST_AUTO does not build on 405EP targets because checking the PCI arbiter is different. So putting the fixed code into a separate function makes the code more readable. Also using is_pci_host() on 405 brings 405 and 440 PCI code a little bit closer. In preparation for an upcoming 405EP based PMC module I made this function weak so that it can be overwritten from board specific code. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
| | * ppc4xx: Fixed PPC4xx debug compilation error in uic.cAlessio Centazzo2009-07-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a debug compilation error for PPC4xx platforms, all other architectures are not affected by this change. The 'handler' pointer was undefined. The fix is exercised and has effect only if DEBUG is defined. Signed-off-by: Alessio Centazzo acpatin@yahoo.com Signed-off-by: Stefan Roese <sr@denx.de>
| | * 4xx: Fix compilation warnings and MQ registers dump in SPD DDR2 codeFelix Radensky2009-07-08-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes printf format string compilation warnings in several debug statements. It also fixes the dump of DDR controller MQ registers found on some 44x and 46x platforms. The current register dump code uses incorrect DCRs to access these registers. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>
| | * ppc4xx: Fix FDT EBC mappings on CanyonlandsFelix Radensky2009-07-08-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes 2 problems with FDT EBC mappings on Canyonlands. First, NAND EBC mapping was missing, making Linux NAND driver unusable on this board. Second, NOR remapping code assumed that NOR is always on CS0, however when booting from NAND NOR is on CS3. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-08-581/+273
|\ \ \ | |/ /
| * | env_onenand: change env_address type from unsigned long to loff_tHeungJun Kim2009-07-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If use the onenand boot, the env_relocate_spec() calls mtd->read(), and the type of the argument #2 of mtd->read() was changed to loff_t. But, the "env_addr" type is still unsigned long, thus this patch change the type from unsigned long to loff_t. Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: HeungJun, Kim <riverful.kim@samsung.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | fsl_elbc_nand: redirect the pointer of bbt pattern to RAMMingkai Hu2009-07-07-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bbt descriptors contains the pointer to the bbt pattern which are statically initialized memory struct. When relocated to RAM, these pointers will continue point to NOR flash(or L2 SRAM, or other boot device). If the contents of NOR flash changed or L2 SRAM disabled, it'll hang the system. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | nand_spl: Fix cmd_ctrl usage in nand_boot.c.Scott Wood2009-07-07-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When adding large page NAND support to this file, I had a misunderstanding about the exact semantics of NAND_CTRL_CHANGE (which isn't documented anywhere I can find) -- it is apparently just a hint to drivers, which aren't required to preserve the old value for subsequent non-"change" invocations. This change makes nand_boot.c no longer assume this. Note that this happened to work by chance with some NAND drivers, which don't preserve the value, but treat 0 equivalently to NAND_CTRL_ALE. I don't have hardware to test this, so any testing is appreciated. Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | Bug-fix in drivers mtd nand Makefilekevin.morfitt@fearnside-systems.co.uk2009-07-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The S3C2410 NAND driver source file is included in the makefile instead of the object file. Signed-off-by: Kevin Morfitt <kevin.morfitt@fearnside-systems.co.uk> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | nand_spl: read environment early, when booting from NAND using nand_splGuennadi Liakhovetski2009-07-07-13/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when booting from NAND using nand_spl, in the beginning the default environment is used until later in boot process the dynamic environment is read out. This way environment variables that must be interpreted early, like the baudrate or "silent", cannot be modified dynamically and remain at their default values. Fix this problem by reading out main and redundand (if used) copies of the environment in the nand_spl code. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | mtd: nand: use loff_t for offsetJean-Christophe PLAGNIOL-VILLARD2009-07-07-17/+17
| | | | | | | | | | | | | | | | | | | | | | | | nand_util currently uses size_t which is arch dependent and not always a unsigned long. Now use loff_t, as does the linux mtd layer. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | nand/onenand: Fix missing argument checking for "markbad" commandWolfgang Denk2009-07-07-22/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "nand markbad" and "onenand markbad" commands did not check if an argument was passed; if this was forgotten, no error was raised but block 0 was marked as bad. While fixing this bug, clean up the code a bit and allow to pass more than one block address, thus allowing to mark several blocks as bad in a single command invocation. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | mtd: nand: new base driver for memory mapped nand devicesMike Frysinger2009-07-07-127/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | The BF537-STAMP Blackfin board had a driver for working with NAND devices that are simply memory mapped. Since there is nothing Blackfin specific about this, generalize the driver a bit so that everyone can leverage it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | env_nand: remove unused variable.Guennadi Liakhovetski2009-07-07-10/+0
| | | | | | | | | | | | | | | | | | | | | Remove an unused "total" variable in multiple functions. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | davinci_nand chipselect/init cleanupDavid Brownell2009-07-07-20/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update chipselect handling in davinci_nand.c so that it can handle 2 GByte chips the same way Linux does: as one device, even though it has two halves with independent chip selects. For such chips the "nand info" command reports: Device 0: 2x nand0, sector size 128 KiB Switch to use the default chipselect function unless the board really needs its own. The logic for the Sonata board moves out of the driver into board-specific code. (Which doesn't affect current build breakage if its NAND support is enabled...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | NAND DaVinci: Update to ALE/CLE Mask valuesSandeep Paulraj2009-07-07-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All DaVinci SOC's use a CLE mask of 0x10 and an ALE mask of 0x8 except the DM646x. This was decided by the design team driving the design. This patch updates the CLE and ALE values for DM646x. Updated patches for DM646x will be sent shortly. This applies to u-boot-nand-flash git Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | ARM DaVinci: Changing ALE Mask ValueSandeep Paulraj2009-07-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The ALE mask used by DaVinci SOCs is wrong. The patch changes the mask value from '0xa' to '0x8'. This is the mask we use for all TI releases. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | davinci_nand: cleanup II (CONFIG_SYS_DAVINCI_BROKEN_ECC)David Brownell2009-07-07-283/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove CONFIG_SYS_DAVINCI_BROKEN_ECC option. It's not just nasty; it's also unused by any current boards, and doesn't even match the main U-Boot distributions from TI (which use soft ECC, or 4-bit ECC on newer chips that support it). DaVinci GIT kernels since 2.6.24, and mainline Linux since 2.6.30, match non-BROKEN code paths for 1-bit HW ECC. The BROKEN code paths do seem to partially match what MontaVista/TI kernels (4.0/2.6.10, and 5.0/2.6.18) do ... but only for small pages. Large page support is really broken (and it's unclear just what software it was trying to match!), and the ECC layout was making three more bytes available for use by filesystem (or whatever) code. Since this option itself seems broken, remove it. Add a comment about the MV/TI compat issue, and the most straightforward way to address it (should someone really need to solve it). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | davinci_nand: cleanup I (minor)David Brownell2009-07-07-87/+22
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minor cleanup for DaVinci NAND code: - Use I/O addresses from nand_chip; CONFIG_SYS_NAND_BASE won't be defined when there are multiple chipselect lines in use (as with common 2 GByte chips). - Cleanup handling of EMIF control registers * Only need one pointer pointing to them * Remove incorrect and unused struct supersetting them - Use the standard waitfunc; we don't need a custom version - Partial legacy cleanup: * Don't initialize every board like it's a DM6446 EVM * #ifdef a bit more code for BROKEN_ECC Sanity checked with small page NAND on dm355 and dm6446 EVMs; and large page on dm355 EVM (packaged as two devices, not one). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Scott Wood <scottwood@freescale.com>
* | all platforms: make show_boot_progress() work againHeiko Schocher2009-07-08-1/+1
|/ | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2009-07-07-2/+5
|\
| * Atmel LCD driver GUARDTIME fixMark Jackson2009-06-30-2/+5
| | | | | | | | | | | | | | | | | | | | This patch allows the guard time parameter to be set in the Atmel LCDC driver. By default, the previous value of 1 is used, unless the setting is defined elsewhere. Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
* | Coding style cleanup; update CHANGELOGWolfgang Denk2009-07-07-59/+3407
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-07-2423/+7966
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: drivers/spi/Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | nhk8815: fix MAKEALLJean-Christophe PLAGNIOL-VILLARD2009-07-06-1/+2
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | MX31: Add NAND SPL boot support to i.MX31 PDK board.Magnus Lilja2009-07-06-5/+293
| | | | | | | | | | | | Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| * | arm: Kirkwood: arch specific updated for ehci-Kirkwood driver supportPrafulla Wadaskar2009-07-06-5/+10
| | | | | | | | | | | | | | | | | | This patch abstracts Kirkwood arch specific changes to support ehci-kirkwood driver Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
| * | arm nomadik: use 1000 as HZ value and rewrite timer codeAlessandro Rubini2009-07-06-140/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This sets CONFIG_SYS_HZ to 1000 as required, and completely rewrites timer code, which is now both correct and much smaller. Unused functions like udelay_masked() have been removed as no driver uses them, even the ones that are not currently active for this board. mtu.h is copied literally from the kernel sources. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | arm nomadik: allow Nand and OneNand to coexistsAlessandro Rubini2009-07-06-20/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | The evaluation kit has both Nand and OneNand, both drivers are there and the two configurations only select a different default for the jffs partition. This adds the OneNand driver and cleans up storage. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
| * | arm nomadik: cleanup resetAlessandro Rubini2009-07-06-15/+3
| | | | | | | | | | | | | | | | | | | | | | | | There is only one public release of the Nomadik chip, so the ifdef in reset code as well as a define in the config file are not needed Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
| * | arm nomadik: rename board to nhk8815Alessandro Rubini2009-07-06-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | This is an error in my side in the initial submission: nobody calls it ""nmdk8815", it's "nomadik hardware kit", nhk8815, instead. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
| * | xscale: add support for the polaris boardStefano Babic2009-07-06-14/+47
| | | | | | | | | | | | | | | | | | | | | The Polaris board is based on the TrizepsIV module of Keith & Koep (http://www.keith-koep.com). Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | xscale: fix USB initialization for Trizepsiv moduleStefano Babic2009-07-06-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Due to change in the usb_board_init() prototype, the USB for the TrizepsIV was not correctly initialized. Removed dummy print from usb_board_stop(). Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | net: merge bugfix: Marvell Kirkwood gigabit ethernet driverPrafulla Wadaskar2009-07-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch looks okay on u-boot-net.git/next branch but when it was merged to u-boot.git/master the last line is missing Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
| * | at91: Add esd gmbh MEESC board supportDaniel Gorsulowski2009-07-06-0/+487
| | | | | | | | | | | | | | | | | | | | | This patch adds support for esd gmbh MEESC board. The MEESC is based on an Atmel AT91SAM9263 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
| * | ARM: Update mach-typesJean-Christophe PLAGNIOL-VILLARD2009-07-06-39/+1612
| | | | | | | | | | | | | | | | | | update against linux v2.6.30 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | at91: Add CAN init functionDaniel Gorsulowski2009-07-06-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | To enable CAN init, CONFIG_CAN has to be defined in the board config file and at91_can_hw_init() has to be called in the board specific code. CAN is available on AT91SAM9263 and AT91CAP9 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
| * | arm: Kirkwood: Correct header defineSimon Kagstrom2009-07-06-1/+1
| | | | | | | | | | | | | | | | | | Correct define typo (. -> ,) Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
| * | MX31: Add basic support for Freescale i.MX31 PDK board.Magnus Lilja2009-07-06-0/+288
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Freescale's i.MX31 PDK board (a.k.a. 3 stack board). This patch assumes that some other program performs the actual NAND boot. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Acked-by: Fabio Estevam <fabioestevam@yahoo.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | S3C24x0: extract interrupts from timerJean-Christophe PLAGNIOL-VILLARD2009-07-06-23/+56
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | dm355/pm9261: add missing CONFIG_NET_MULTIJean-Christophe PLAGNIOL-VILLARD2009-07-06-0/+2
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | arm920t/interrupts: Move conditional compilation to MakefileJean-Christophe PLAGNIOL-VILLARD2009-07-06-6/+6
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v1.1 at 2024-12-30 13:09:50 +0000