summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* OMAP3: CM-T35: Add support for CM-T3730Igor Grinberg2011-04-27-25/+65
| | | | | | | | CM-T3730 is exactly the same board as CM-T35, but it has TI DM3730 SoC onboard and therefore some changes have to take place Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: enable the green LEDIgor Grinberg2011-04-27-2/+67
| | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: remove redundand i2c initializationIgor Grinberg2011-04-27-5/+1
| | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: fix mmcIgor Grinberg2011-04-27-9/+1
| | | | | | | Use CONFIG_OMAP3_MMC in cm-t35 configuration file. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: add MMC1 pinmuxIgor Grinberg2011-04-27-0/+12
| | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: update MAINTAINERS fileIgor Grinberg2011-04-27-4/+4
| | | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: update board files header informationIgor Grinberg2011-04-27-7/+7
| | | | | Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: update configIgor Grinberg2011-04-27-1/+4
| | | | | | | update config for OMAP3 CM-T35 Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: CM-T35: Move DECLARE_GLOBAL_DATA_PTR to file scopeIgor Grinberg2011-04-27-2/+2
| | | | | | | Move DECLARE_GLOBAL_DATA_PTR to file scop Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* ARMV7: AM3517/05: Add support for CraneBoard.Srinath2011-04-27-0/+891
| | | | | | | | It is a low cost reference design based on Sitara AM3517 SoC from Texas Instruments Please refer to <www.craneboard.org> for more details. Signed-off-by: Srinath <srinath@mistralsolutions.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: BeagleBoard: add more expansionboard IDsKoen Kooi2011-04-27-1/+41
| | | | | | | | | | | | | | | Information on configurations pulled from http://www.elinux.org/BeagleBoardPinMux#Vendor_and_Device_IDs Boards added: * Added BeagleBoardToys WiFi, VGA and LCD boards * Added KBADC Beagle FPGA board * Added Brainmux LCDog and LCDog Touch * Added Liquidware BeagleTouch Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: BeagleBoard: add xM rev B to ID tableKoen Kooi2011-04-27-7/+20
| | | | | | | | | | | | Patch was updated by Jason Kridner <jkridner@beagleboard.org>: * Use tabs to match style of other board revisions * Only include board revisions that exist * Default to the same configuration as the latest revision, but without setting 'beaglerev' Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* OMAP3: BeagleBoard: Enable pullups on i2c2.Steve Kipisz2011-04-27-0/+18
| | | | | | | | | This allows the reading of EEPROMS on the expansion bus without adding external pull-ups. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* omap3_beagle: enable the use of a plain text fileAlexander Holler2011-04-27-12/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Using the new env import command it is possible to use plain text files instead of script-images. Plain text files are much easier to handle. E.g. If your boot.scr contains the following: ----------------------------------- setenv dvimode 1024x768-16@60 run loaduimage run mmcboot ----------------------------------- you could create a file named uEnv.txt and use that instead of boot.scr: ----------------------------------- dvimode=1024x768-16@60 uenvcmd=run loaduimage; run mmcboot ----------------------------------- The variable uenvcmd (if existent) will be executed (using run) after uEnv.txt was loaded. If uenvcmd doesn't exist the default boot sequence will be started, therefore you could just use ----------------------------------- dvimode=1024x768-16@60 ----------------------------------- as uEnv.txt because loaduimage and mmcboot is part of the default boot sequence Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* BeagleBoard: Added LED driverJason Kridner2011-04-27-1/+114
| | | | | | | | | | Added LED driver using status_led. USR0 is set to monitor the boot status. USR1 is set to be the green LED. Included adding configuration and command to the default configuration. Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* Add 'led' commandJason Kridner2011-04-27-0/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows any board implementing the coloured LED API to control the LEDs from the console. led [green | yellow | red | all ] [ on | off ] or led [ 1 | 2 | 3 | all ] [ on | off ] Adds configuration item CONFIG_CMD_LED enabling the command. Partially based on patch from Ulf Samuelsson: http://www.mail-archive.com/u-boot@lists.denx.de/msg09593.html. Updated based on feedback: http://www.mail-archive.com/u-boot@lists.denx.de/msg41847.html https://groups.google.com/d/topic/beagleboard/8Wf1HiK_QBo/discussion * Fixed a handful of style issues. * Significantly reduced the number of #ifdefs and redundant code * Converted redundant code into loops test against a structure * Made use of cmd_usage() * Introduced a str_onoff() function, but haven't yet put it in common * Eliminated trailing newline Signed-off-by: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* MX31: drop warnings in get_cpu_revStefano Babic2011-04-27-1/+1
| | | | | | | | Drop warnings due to recent commit ARM: mx31: Print the silicon version Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
* MX5: factor out boot cause funciton to common codeJason Liu2011-04-27-0/+28
| | | | | | | factor out boot cause function to common code to avoid the duplicate code in each board support package Signed-off-by: Jason Liu <jason.hui@linaro.org>
* ARM: MX31: Fix file name labelFabio Estevam2011-04-27-3/+3
| | | | | | | | | Commit 5d2c154 (IMX: MX31: Cleanup include files and drop nasty #ifdef in drivers) renamed mx31-imx-regs.h to imx-regs.h. Change the file label accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX31: mx31pdk: Make the board name simpler.Fabio Estevam2011-04-27-1/+1
| | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX31: Introduce get_reset_cause()Fabio Estevam2011-04-27-1/+28
| | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
* ARM: mx31: Print the silicon versionFabio Estevam2011-04-27-2/+53
| | | | | | | | | | | Use the same method of the Linux kernel to print the MX31 silicon version on boot. Tested on a MX31PDK with a 2.0 silicon, where it shows: CPU: Freescale i.MX31 rev 2.0 at 531 MHz Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* IMX: MX31: Cleanup include files and drop nasty #ifdef in driversStefano Babic2011-04-27-58/+35
| | | | | | | | | | As exception among the i.MX processors, the i.MX31 has headers without general names (mx31-regs.h, mx31.h instead of imx-regs.h and clock.h). This requires several nasty #ifdef in the drivers to include the correct header. The patch cleans up the driver and renames the header files as for the other i.MX processors. Signed-off-by: Stefano Babic <sbabic@denx.de>
* MX5: Enable flat-device-tree support on mx51/53 evk boardLiu Hui-R643432011-04-27-0/+6
| | | | | | | | device tree for uboot arm support has already been enabled in the master branch. This patch enable device tree support for mx51/53 evk board for DT test. Signed-off-by: Jason Liu <r64343@freescale.com>
* MX53: drop config.mk from mx53evkLiu Hui-R643432011-04-27-25/+1
| | | | | | | | The config.mk file in board directory is now obsolete and should be removed. Add option for the IMX image into boards.cfg Signed-off-by: Jason Liu <r64343@freescale.com>
* mx25: Make the UART port number explicit in its setup functionFabio Estevam2011-04-27-3/+3
| | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX31: qong: add watchdogStefano Babic2011-04-27-0/+13
| | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
* MX31: add support for MX31 watchdogStefano Babic2011-04-27-1/+47
| | | | | | | | | | | | | | | | | | The patch add CONFIG_HW_WATCHDOG to be used with the internal watchdog timer of the MX31 processor. Two function are exported for the board maintainers: mxc_hw_watchdog_enable mxc_hw_watchdog_reset The board maintainer can decide to use mxc_hw_watchdog_reset as hw_watchdog_reset, or to implement his own function to reset the watchdog. The watchdog timer can be configured with CONFIG_SYS_WD_TIMER_SECS (value in seconds). The MX31 allows values between 0.5 (CONFIG_SYS_WD_TIMER_SECS = 0) and 128 seconds. Signed-off-by: Stefano Babic <sbabic@denx.de>
* MX51: drop config.mk from mx51evkStefano Babic2011-04-27-26/+3
| | | | | | | | The config.mk file in board directory is now obsolete and should be removed. Add option for the IMX image into boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
* Makefile: change rule to build IMX imageStefano Babic2011-04-27-1/+1
| | | | | | | | config.mk in board directory is obsolete and should be removed. The patch allows to get rid of own config.mk adding the imximage.cfg file to the options in the boards.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
* mpc52xx, digsy_mtc: add trickle charger support for rev5 boards.Heiko Schocher2011-04-26-0/+2
| | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* rtc, rv3029: add trickle charger support.Heiko Schocher2011-04-26-0/+89
| | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
* Fix typo in #error: IS_IN_NOWHERE vs. IS_NOWHERELoïc Minier2011-04-26-1/+1
| | | | Signed-off-by: Loïc Minier <loic.minier@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk2011-04-25-5/+22
|\
| * cfi_flash driver - Add delay after reset commandAaron Williams2011-04-21-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | I ran into a problem where the reset was failing except when I enabled debugging support. After talking with Garret Swalling at Spansion I was told that the GL-N series of devices require a 500ns wait for the reset to complete. The below patch adds a 1us delay after all reset commands. -Aaron Williams Signed-off-by: Aaron Williams <aaron.williams@caviumnetworks.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * mtd, cfi: read AMD 3-byte (expanded) device ids on 16bit devicesHeiko Schocher2011-04-21-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tested on the a4m072 board with a S29GL512P flash. flinfo without this patch Bank # 1: CFI conformant flash (16 x 16) Size: 32 MB in 256 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E Erase timeout: 16384 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 32 bytes [...] flinfo with this patch Bank # 1: CFI conformant flash (16 x 16) Size: 32 MB in 256 Sectors AMD Standard command set, Manufacturer ID: 0x01, Device ID: 0x227E2301 Erase timeout: 16384 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 32 bytes [...] Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * cfi_flash: reverse geometry for M29W800DT partsMike Frysinger2011-04-21-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The M29W800DT parts also report their geometry with the sector layout reversed. So add that ID to the flash_fixup_stm function. Otherwise, we get: bfin> flinfo Bank # 1: CFI conformant FLASH (16 x 16) Size: 1 MB in 19 Sectors AMD Standard command set, Manufacturer ID: 0x20, Device ID: 0x22D7 Erase timeout: 8192 ms, write timeout: 1 ms Sector Start Addresses: 20000000 20004000 20006000 20008000 20010000 20020000 20030000 20040000 20050000 20060000 20070000 20080000 20090000 200A0000 200B0000 200C0000 200D0000 200E0000 200F0000 Reported-by: Jianxi Fu <fujianxi@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-04-25-24/+118
|\ \
| * | ppc4xx: Do not stop booting on any keypress on dlvision-10gDirk Eibach2011-04-21-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_AUTOBOOT_KEYED on dlvision-10g so that booting can only be stopped with well defined keypresses. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Improve fan PWM curve on DLVision 10GDirk Eibach2011-04-21-1/+2
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Enable MPC92469AC on DLVision 10GDirk Eibach2011-04-21-3/+6
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Set DLVision 10G osd position to linux defaultsDirk Eibach2011-04-21-2/+7
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Adapt DLVision 10G to new FPGA firmwareDirk Eibach2011-04-21-11/+33
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Enable LM64 on DLVision 10GDirk Eibach2011-04-21-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Improve video board detectionDirk Eibach2011-04-21-8/+18
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Improve DLVision-10G PLL setupDirk Eibach2011-04-21-3/+52
| | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | xilinx_ppc_boards: Change address of RESET_VECTORRicardo Ribalda Delgado2011-04-21-5/+5
| |/ | | | | | | | | | | | | | | Old address of RESET_VECTOR were overwritten by the bss sector, making impossible its run from xmd. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | powerpc, 8xx: Fix fallout from "Fixup all 8xx u-boot.lds scripts"Joakim Tjernlund2011-04-24-4/+5
|/ | | | | | Two linker scripts for 8xx was missed. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* tools/env: fix redundant env flag comparisonJon Povey2011-04-21-7/+6
| | | | | | | | | | | | | | | | | | This fixes two bugs with comparison of redundant environment flags on read. flag0 and flag1 in fw_env_open() were declared signed instead of unsigned char breaking BOOLEAN mode "== 0xFF" tests and in INCREMENTAL mode the wrong environment would be chosen where the flag values are 127 and 128 (either way round). With both flags over 128, both signs flipped and the logic worked by happy accident. Also there was a logic bug in the INCREMENTAL test (after signedness was fixed) in the case flag0=0, flag1=255, env 1 would be incorrectly chosen. Fix both of these. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
* Merge branch 'phylib' of git://git.denx.de/u-boot-mmcWolfgang Denk2011-04-20-2322/+4902
|\
generated by cgit v1.1 at 2024-12-15 15:51:21 +0000