summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Merge with ssh://fifi/home/wd/git/u-boot/masterWolfgang Denk2006-06-19-633/+2182
|\
| * Add support for gth2 boardWolfgang Denk2006-06-16-3/+1773
| | | | | | | | Patch by Thomas Lange, Aug 11 2005
| * Add support for CONFIG_SERIAL_MULTI on MPC5xxxWolfgang Denk2006-06-16-13/+211
| | | | | | | | | | | | | | | | | | | | | | | | Patch by Martin Krause, 8 Jun 2006 This patch supports two serial consoles on boards with a MPC5xxx CPU. The console can be switched at runtime by setting stdin, stdout and stderr to the desired serial interface (serial0 or serial1). The PSCs to be used as console port are definded by CONFIG_PSC_CONSOLE and CONFIG_PSC_CONSOLE2. See README.serial_multi for details.
| * Bugfix in I2C initialisation on S3C2400.Wolfgang Denk2006-06-16-1/+9
| | | | | | | | | | | | | | | | | | If the bus is blocked because of a previously interrupted transfer, up to eleven clocks are generated on the I2CSCL line to complete the transfer and to free the bus. With this fix pin I2CSCL (PG6) is really configured as GPIO so the clock pulses are really generated. Patch by Martin Krause, 04 Apr 2006
| * Fix DDR6 errata on TQM834x boardsWolfgang Denk2006-06-16-0/+27
| | | | | | | | Patch by Thomas Waehner, 07 Mar 2006
| * Remove obsolete flash driver board/tqm5200/flash.cWolfgang Denk2006-06-16-498/+3
| | | | | | | | Patch by Martin Krause, 11 Jan 2006
| * Update configuration for CMC-PU2 boardWolfgang Denk2006-06-16-10/+4
| | | | | | | | Patch by Martin Krause, 17 Nov 2005
| * Add support for PS/2 keyboard on TQM85xx boardWolfgang Denk2006-06-16-7/+81
| | | | | | | | | | | | | | Patch by Martin Krause, 07 Nov 2005 Tested on a STK85XX baseboard. Make sure the PS/2 controller has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
| * Fix TRAB channel switching delay for trab_fkt.bin standalone applikationWolfgang Denk2006-06-16-1/+8
| | | | | | | | | | | | | | | | | | Patch by Martin Krause, 08 Nov 2005 In tsc2000_read_channel() the delay after setting the multiplexer to a temperature channel is increased from 1,5 ms to 10 ms. This is to allow the multiplexer inputs to stabilize after huge steps of the input signal level.
| * Adjust TQM5200 make targetsWolfgang Denk2006-06-16-95/+27
| | | | | | | | | | | | | | | | | | Make the automatic CS configuration the default. The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB and CONFIG_TQM5200_AC are removed. "TQM5200_config" is now the default for STK52XX.200 base boards. On a STK52XX.100 base board "TQM5200_STK100_config" must be used. Patch by Martin Krause, 07 Nov 2005
| * Fix setting of environment variable "ver" on trab boardWolfgang Denk2006-06-16-0/+19
| | | | | | | | | | | | | | The environment variable "ver" is now set before do_auto_update() is called, so that "ver" can be used in USB update scripts. Patch by Martin Krause, 27 Oct 2005
| * Fix wrong usage of udelay() in led_blink() on trab boardWolfgang Denk2006-06-16-0/+4
| | | | | | | | Patch by Martin Krause, 27 Oct 2005
| * Fix udelay bug in vfd.c for trab boardWolfgang Denk2006-06-16-1/+8
| | | | | | | | Patch by Martin Krause, 27 Oct 2005
| * Disable JFFS2 support for trab boardWolfgang Denk2006-06-16-2/+3
| | | | | | | | Patch by Martin Krause, 27 Oct 2005
| * Change mtdparts definition on trab board to match current flash mapWolfgang Denk2006-06-16-2/+5
| | | | | | | | Patch by Martin Krause, 27 Oct 2005
* | Fix IxEthDB.h to compile againStefan Roese2006-06-14-2/+5
| | | | | | | | Patch by Stefan Roese, 14 Jun 2006
* | Minor cleanup for PCS440EP boardStefan Roese2006-06-13-5/+8
|/ | | | Patch by Stefan Roese, 13 Jun 2006
* Minor code cleanup.Wolfgang Denk2006-06-10-53/+51
|
* Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk2006-06-10-140/+2442
|\
| * Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40Heiko Schocher2006-04-26-1/+1620
| | | | | | | | Patch from Scott McNutt, 11 Aug 2005
| * * Update PK1C20 board for Nios-II 5.0Heiko Schocher2006-04-20-52/+50
| | | | | | | | | | | | Patch from Scott McNutt, 11 Aug 2005 -Update base addresses for standard configuration -Eliminate use of CACHE_BYPASS in board code
| * * Add EPCS Controller bootrom work-around for Nios-IIHeiko Schocher2006-04-20-1/+37
| | | | | | | | | | | | | | Patch from Scott McNutt 11, Aug 2005 -When booting from an epcs controller, the epcs bootrom may leave the slave select in an asserted state causing soft reset hang. This patch ensures slave select is negated at reset.
| * Fix I/O Macros and mini-app stubs for Nios-IIHeiko Schocher2006-04-20-43/+58
| | | | | | | | | | | | | | | | Patch by Scott McNutt 11, Aug 2005 -Fix asm/io.h macros -Eliminate use of CACHE_BYPASS in cpu code -Eliminate assembler warnings -Fix mini-app stubs and force no small data
| * Add MCF5282 support (without preloader)Heiko Schocher2006-04-20-103/+2421
| | | | | | | | | | | | | | | | relocate ichache_State to ram u-boot can run from internal flash Add EB+MCF-EV123 board support. Add m68k Boards to MAKEALL Patch from Jens Scharsig, 08 Aug 2005
* | Merge with http://www.psyent.com/git/uboot (NIOS2 - Scott McNutt)Wolfgang Denk2006-06-10-95/+1763
|\ \
| * | Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boardsScott McNutt2006-06-08-1/+1620
| | | | | | | | | | | | Patch by Scott McNutt, 08 Jun 2006
| * | Nios II - Add EPCS Controller bootrom work-aroundScott McNutt2006-06-08-0/+36
| | | | | | | | | | | | | | | | | | | | | -When booting from an epcs controller, the epcs bootrom may leave the slave select in an asserted state causing soft reset hang. This patch ensures slave select is negated at reset. Patch by Scott McNutt, 08 Jun 2006
| * | Update PK1C20 boardScott McNutt2006-06-08-50/+48
| | | | | | | | | | | | | | | | | | -Update base addresses for standard configuration -Eliminate use of CACHE_BYPASS in board code Patch by Scott McNutt, 08 Jun 2006
| * | Nios II - Fix I/O Macros and mini-app stubsScott McNutt2006-06-08-43/+58
| | | | | | | | | | | | | | | | | | | | | | | | -Fix asm/io.h macros -Eliminate use of CACHE_BYPASS in cpu code -Eliminate assembler warnings -Fix mini-app stubs and force no small data Patch by Scott McNutt, 08 Jun 2006
* | | Fix U-Boot enviroenment sector protection on MCC200 boardWolfgang Denk2006-06-09-1/+3
|/ /
* | Minor cleanup for PCS440EP boardWolfgang Denk2006-06-07-6/+7
| |
* | Update PCS440EP port to fit into one flash device (incl. environment)Stefan Roese2006-06-06-24/+11
| | | | | | | | Patch by Stefan Roese, 06 Jun 2006
* | Minor cleanupWolfgang Denk2006-06-02-25/+31
| |
* | Merge with /home/sr/git/u-boot/denxWolfgang Denk2006-06-02-50/+1987
|\ \
| * | Add support for PCS440EP boardStefan Roese2006-06-02-50/+1987
| | | | | | | | | | | | Patch by Stefan Roese, 02 Jun 2006
* | | Fix examples/Makefile; some build targets were lostWolfgang Denk2006-06-02-1/+3
| | |
* | | Fix watchdog handling in CFI flash driverWolfgang Denk2006-06-02-5/+5
|/ / | | | | | | | | Just use udelay() when waiting for status changes which will implicitely trigger the watchdog.
* | Fix PCI to memory window size problems on PM82x boardsWolfgang Denk2006-05-30-2/+7
| | | | | | | | | | | | We use the "automatic" mode that was used for the MPC8266ADS and MPC8272 boards. Eventually this should be used on all boards?] Patch by Wolfgang Grandegger, 17 Jan 2006
* | Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstoneWolfgang Denk2006-05-30-4/+7
| | | | | | | | Patch by Stefan Roese, 29 May 2006
* | Minor cleanup.Wolfgang Denk2006-05-30-2592/+74
| |
* | * Update Intel IXP4xx supportWolfgang Denk2006-05-30-72/+74591
| | | | | | | | | | | | | | | | | | | | | | - Add IXP4xx NPE ethernet MAC support - Add support for Intel IXDPG425 board - Add support for Prodrive PDNB3 board - Add IRQ support Patch by Stefan Roese, 23 May 2006 [This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still sufferes from licensing issues. Blame Intel.]
* | Fix problem in PVR detection for 440GRStefan Roese2006-05-18-1/+4
| | | | | | | | Patch by Stefan Roese, 18 May 2006
* | Fix gcc 3.4.x AFLAGS setting for m68k platform.Marian Balakowicz2006-05-17-2/+5
| |
* | Enable autoboot for M5271EVB board.Marian Balakowicz2006-05-17-0/+4
| |
* | Merge with /home/sr/git/u-boot/denxWolfgang Denk2006-05-15-4/+7
|\ \
| * | Changed default ramdisk addr in yosemite/yellowstone portsStefan Roese2006-05-15-4/+7
| | | | | | | | | | | | Patch by Stefan Roese, 15 May 2006
* | | Fix PCMCIA support on virtlab2Wolfgang Denk2006-05-15-0/+9
|/ /
* | Cleanup compile warning.Wolfgang Denk2006-05-12-0/+2
| |
* | Add support for VirtLab2 boardWolfgang Denk2006-05-12-5/+643
| | | | | | | | (needed because of differences in the PCMCIA hardware).
* | Minor cleanup.Wolfgang Denk2006-05-10-37/+36
| |
generated by cgit v1.1 at 2024-12-18 06:30:56 +0000