summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* USB-CDC: correct wrong alignment in ether.cStefano Babic2010-09-20-1/+1
| | | | | | | | The buffer for the status request must be word aligned because it is accessed with 32 bit pointer in the eth_status_complete function. Signed-off-by: Stefano Babic <sbabic@denx.de>
* USB-CDC: change simple_strtol to simple_strtoulVitaly Kuzmichev2010-09-20-1/+1
| | | | | | | | | | The patch is based on commit bb9496c6f7e853e5d4edd5397c9d45f1968d623c (done by Julia Lawall <julia@diku.dk>) from linux-2.6.git. Since num is unsigned, it would seem better to use simple_strtoul that simple_strtol. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: ethernet error path potential oops fixVitaly Kuzmichev2010-09-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix potential oops on rare error path. The patch is based on commit e7b13ec9235b9fded90f826ceeb8c34548631351 (done by David Brownell <david-b@pacbell.net>) from linux-2.6.git. Description of the issue taken from linux kernel bugzilla: (https://bugzilla.kernel.org/show_bug.cgi?id=9594) The potential error can be tracked down as follows: (1) line 807: let the second conjunct on the "if" statment be false meaning "dev->status_ep" is null. This means the "if" evaluates to false. follow thru the code until... (2) line 808: usb_ep_disable(dev->status_ep) passes in a null argument, however "usb_ep_disable" cannot handle that: (from include/linux/usb/gadget.h) 191 static inline int 192 usb_ep_disable (struct usb_ep *ep) 193 { 194 return ep->ops->disable (ep); 195 } -- Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Correct stat_req initializationVitaly Kuzmichev2010-09-20-4/+3
| | | | | | | | Fix possible oops on stat_req->buf initialization and fix ep0 and status_ep confusion (last one is just intended for stat_req keeping). Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com> Signed-off-by: Stefano Babic <sbabic@denx.de>
* USB-CDC: Replace 'strcpy' by 'strlcpy'Vitaly Kuzmichev2010-09-20-3/+3
| | | | | | Replace 'strcpy' by more safe 'strlcpy' that is implemented in ether.c Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Correct freeing usb requestsVitaly Kuzmichev2010-09-20-2/+7
| | | | | | | Fix in_ep and out_ep confusion (rx_req was allocated from out_ep, not from in_ep) and add lost dev->req freeing. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Use native debug printout macrosVitaly Kuzmichev2010-09-20-53/+43
| | | | | | | | Replace Linux-like debug printout macros by native ones. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com> Applied after removing dead code like '#define DEBUG/#undef DEBUG'
* USB-CDC: Add lost 'qmult' definitionVitaly Kuzmichev2010-09-20-0/+6
| | | | | | | Add lost 'qmult' definition for High Speed devices and make it configurable through CONFIG_USB_ETH_QMULT. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* USB-CDC: Restuct USB gadget MakefileVitaly Kuzmichev2010-09-20-2/+5
| | | | | | | Prohibit simultaneous usage of both old and new gadget stacks and allow UDC drivers to be dependent on CONFIG_USB_ETHER. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* Integrate USB gadget layer and USB CDC driver layerRemy Bohmer2010-09-20-2/+4425
| | | | | | | Derived from Linux kernel 2.6.27 Signed-off-by: Thomas Smits <ts.smits@gmail.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* usb: musb: stub out MUSB_TXCSR_MODE for Blackfin partsMike Frysinger2010-09-20-0/+2
| | | | | | | The MUSB_TXCSR_MODE register setting isn't supported on Blackfin musb parts, so stub it out to 0. This matches Linux behavior. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* canmb board: Fix compiler warningsWolfgang Denk2010-09-19-4/+4
| | | | | | | | | | | | | | | | Recent changes caused thatthe aev board now is included in the boards built by MAKEALL, which revealed that compilation for this board has been broken for a long time: canmb.c: In function 'initdram': canmb.c:109: warning: pointer targets in passing argument 1 of 'get_ram_size' differ in signedness canmb.c:111: warning: pointer targets in passing argument 1 of 'get_ram_size' differ in signedness canmb.c:137: warning: pointer targets in passing argument 1 of 'get_ram_size' differ in signedness canmb.c:140: warning: pointer targets in passing argument 1 of 'get_ram_size' differ in signedness Fix these. Signed-off-by: Wolfgang Denk <wd@denx.de>
* aev board: Fix compile problemsWolfgang Denk2010-09-19-2/+3
| | | | | | | | | | | | | Recent changes caused thatthe aev board now is included in the boards built by MAKEALL, which revealed that compilation for this board has been broken for a long time: mpc5xxx_fec.c:899:2: error: #error fec->xcv_type not initialized. mpc5xxx_fec.c:899:2: error: #error fec->xcv_type not initialized. Fix it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* da8xx: fixup ARM relocation supportBen Gardiner2010-09-19-0/+18
| | | | | | | | | | | | | | | | | | | | | Split the existing dram_init for da8xx when ARM reloc is enabled, like the changes to arch/arm/cpu/arm926ejs/orion5x/dram.c in 0f234d263b17ccf1b8fd776eb8c15b7cdb27a887 by Heiko Schocher <hs@denx.de>. Without these changes gd->ram_size is '0' which leads to incorrect relocation when CONFIG_SYS_ARM_WITHOUT_RELOC is defined and the board does not boot. We use get_ram_size to dynamically calculate the available RAM because it runs on different board version with different ram, as suggested by Heiko in private communication. Tested on a da850evm with 128M of DDR2 installed; with both CONFIG_SYS_ARM_WITHOUT_RELOC defined and undefined. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> CC: Sudhakar Rajashekhara <sudhakar.raj@ti.com> CC: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for arm1176Heiko Schocher2010-09-19-1/+299
| | | | | | | | | | Change the implementation for arm1176 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for arm720tHeiko Schocher2010-09-19-1/+183
| | | | | | | | | | Change the implementation for arm720t to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for arm_intcmHeiko Schocher2010-09-19-1/+179
| | | | | | | | | | Change the implementation for arm_intcm to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for lh7a40xHeiko Schocher2010-09-19-2/+199
| | | | | | | | | | Change the implementation for lh7a40x to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for s3c44b0Heiko Schocher2010-09-19-1/+187
| | | | | | | | | | Change the implementation for s3c44b0 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for sa1100Heiko Schocher2010-09-19-1/+175
| | | | | | | | | | Change the implementation for sa1100 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for ixpHeiko Schocher2010-09-19-1/+293
| | | | | | | | | | Change the implementation for ixp to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for pxaHeiko Schocher2010-09-19-1/+181
| | | | | | | | | | Change the implementation for pxa to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for ARM946Heiko Schocher2010-09-19-2/+180
| | | | | | | | | | Change the implementation for arm946 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for ARM925Heiko Schocher2010-09-19-2/+216
| | | | | | | | | | Change the implementation for arm925 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for ARM920Heiko Schocher2010-09-19-2/+237
| | | | | | | | | | Change the implementation for arm920 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for ARM926Heiko Schocher2010-09-19-21/+310
| | | | | | | | | | | | | | | | | | | | | Change the implementation for arm926 to relocate the code to an arbitrary address in RAM. Adapt the TX25 (i.MX25), magnesium board to test the changes. On the tx25 board TEXT_BASE is set to the final relocation address to prevent one more copying of u-boot code when relocating. More info see: doc/README.arm-relocation da850 board: Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca>
* ARM: implement relocation for ARM V7 (OMAP)Heiko Schocher2010-09-19-7/+291
| | | | | | | | | | | | Change the implementation for ARM V7 to relocate the code to an arbitrary address in RAM. Adapt the Beagle board (Cortex A8) to test the changes. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: implement relocation for ARM11Heiko Schocher2010-09-19-43/+273
| | | | | | | | | | | | Change the implementation for ARM11 to relocate the code to an arbitrary address in RAM. Tested on the qong board. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM: add relocation supportHeiko Schocher2010-09-19-8/+910
| | | | | | | | | | | | | | | | | | | !! This breaks support for all arm boards !! To compile in old style, you must define CONFIG_SYS_ARM_WITHOUT_RELOC or you can compile with "CONFIG_SYS_ARM_WITHOUT_RELOC=1 ./MAKEALL board" !! This define will be removed soon, so convert your board to use relocation support Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de> Fix boot from NAND for non-ARM systems Signed-off-by: Wolfgang Denk <wd@denx.de>
* nand_boot_fsl_nfc.c: make "nfc" a "static const" pointerHeiko Schocher2010-09-19-5/+1
| | | | | | | | | | | | | With -fPIC enabled, this variable needs an entry in the GOT, which causes the image size to exceed 2 KiB which is the maximum allowed for some systems. Making it a "static const" avoids the GOT entry and thus reduces the image size to < 2 KiB. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Scott Wood <scottwood@freescale.com>
* i2c, omap24xx: set bus_initialized only after relocation.Heiko Schocher2010-09-19-1/+3
| | | | | | | Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* disk/part.c: fix relocation fixupHeiko Schocher2010-09-19-2/+9
| | | | | | | Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* i2c: fix command usage helpHeiko Schocher2010-09-19-0/+3
| | | | | | | Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* common: move TOTAL_MALLOC_LEN to include/common.hHeiko Schocher2010-09-19-26/+9
| | | | | | | Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* relocation: fixup cmdtableHeiko Schocher2010-09-19-92/+56
| | | | | | | | | | | | | fixup_cmdtable() did all work for fixing up the cmdtable, if CONFIG_RELOC_FIXUP_WORKS is not defined. CONFIG_RELOC_FIXUP_WORKS is missing for i386! I talked with Graeme Russ, and he will fix this soon. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM (ARM11): add data cache support, test on Qong boardHeiko Schocher2010-09-19-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Add data cache support for arm1136 systems. Enable "cache" command on Qong board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- QONG (ARM11) 177s 95s 43s = x 4.1 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- QONG (ARM11) 1.54s 0.95s 0.18s = x 8.6 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
* ARM V7 (OMAP): add data cache support, test on Beagle boardHeiko Schocher2010-09-19-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add data cache support for ARM V7 systems. Used cache flush functions from linux:arch/arm/mm/cache-v7.S developed from Catalin Marinas. Enable "cache" command on Beagle board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- Beagle (Cortex A8) 116s 106s 30.3s = x 3.8 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- Beagle (Cortex A8) 1.84s 1.64s 0.12s = x 15.3 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Ben Gardiner<bengardiner@nanometrics.ca>
* ARM (ARM926ejs): add data cache support, tested on magnesium and tx25 boardHeiko Schocher2010-09-19-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable "cache" command on tx25 and magnesium board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- magnesium 32,6s 22,5s 30s = x 1,09 tx25 (29MB only) 9,69s 5,05s 8,16s = x 1,19 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- magnesium 4,25s 2,08s 1,72s = x 2,47 tx25 4,82s 2,04s 1,84s = x 2,62 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Alessandro Rubini <rubini@gnudd.com>
* ARM: cp15: setup mmu and enable dcacheHeiko Schocher2010-09-19-0/+51
| | | | | | | | | | | | | | | | | | | | | This has been tested on at91sam9263 and STN8815. Again, I didn't check if it has bad effects on non-arm926 cores. Initially I had a "done" bit to only set up page tables at the beginning. However, since the aligmnent requirement was for the whole object file, this extra integer tool 16kB in BSS, so I chose to remove it. Also, note not all boards use PHYS_SDRAM, but it looks like it's the most used name (more than CONFIG_SYS_DRAM_BASE for example). Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Heiko Schocher <hs@denx.de>
* arm: get rid of bi_envHeiko Schocher2010-09-19-12/+0
| | | | | | | | | bi_env is nowhere used, so delete it! Signed-off-by: Heiko Schocher <hs@denx.de> similar patch posted from Dirk Behme Tue Jul 27 18:36:09 CEST 2010 http://lists.denx.de/pipermail/u-boot/2010-July/074542.html
* mpc52xx: Cleanup use of CONFIG_SYS_SRAM_BASE and CONFIG_SYS_SRAM_SIZEHeiko Schocher2010-09-19-3/+3
| | | | | | cleanup for the uc101 and the mucmc52 board. Signed-off-by: Heiko Schocher <hs@denx.de>
* tools: enable img2srec for "tools-all" targetMike Frysinger2010-09-19-0/+1
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* tools/env: use host build flagsMike Frysinger2010-09-19-3/+3
| | | | | | | Convert the tools/env/Makefile to use the same host tool syntax as the other tool subdirs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* unify toplevel tools targetsMike Frysinger2010-09-19-12/+11
| | | | | | | | | | | Most tool subdirs do not rely on a configured tree, so move those targets out of the config checks and unify them in the process. Also add an easylogo target so people can easily build that. Also add these new tool targets to the 'tools-all' target. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* tools: update .gitignoreMike Frysinger2010-09-19-0/+5
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* MAKEALL: cut down on duplication of targetsMike Frysinger2010-09-19-301/+56
| | | | | | | | | | | | | | Merge the other significant source of board name duplication with the new boards.cfg file. I cleaned up most targets, but the ARM and MIPS trees are such a mess than I didn't bother. If those maintainers care, they can take are of it. While we're at it, we can be a bit more clever in the LIST_xxx handling and avoid duplicating the list names too. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca> Tested-by: Thomas Chou <thomas@wytron.com.tw>
* Makefile: restore support for board shortcut targetsMike Frysinger2010-09-19-3/+4
| | | | | | | | | | | | | | | | | The helpful shortcut for doing a board config + make was dropped recently as it conflicted with some new build code. However, the reason for using pattern targets originally was to avoid managing a duplicate list of boards. Since we now have one centralized place for a list of boards (the new boards.cfg), we don't need a pattern target -- we can generate the exact list of boards on the fly. So do just that. When cleaning things up, the top level gitignore file ignores all things that end with ".depend", but the clean target only deletes files that are named exactly ".depend". Keep these in sync by having the clean target punt all files that match the pattern that gitignore is using. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Detlev Zundel <dzu@denx.de>
* New implementation for internal handling of environment variables.Wolfgang Denk2010-09-19-776/+1186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Motivation: * Old environment code used a pessimizing implementation: - variable lookup used linear search => slow - changed/added variables were added at the end, i. e. most frequently used variables had the slowest access times => slow - each setenv() would calculate the CRC32 checksum over the whole environment block => slow * "redundant" envrionment was locked down to two copies * No easy way to implement features like "reset to factory defaults", or to select one out of several pre-defined (previously saved) sets of environment settings ("profiles") * No easy way to import or export environment settings ====================================================================== API Changes: - Variable names starting with '#' are no longer allowed I didn't find any such variable names being used; it is highly recommended to follow standard conventions and start variable names with an alphanumeric character - "printenv" will now print a backslash at the end of all but the last lines of a multi-line variable value. Multi-line variables have never been formally defined, allthough there is no reason not to use them. Now we define rules how to deal with them, allowing for import and export. - Function forceenv() and the related code in saveenv() was removed. At the moment this is causing build problems for the only user of this code (schmoogie - which has no entry in MAINTAINERS); may be fixed later by implementing the "env set -f" feature. Inconsistencies: - "printenv" will '\\'-escape the '\n' in multi-line variables, while "printenv var" will not do that. ====================================================================== Advantages: - "printenv" output much better readable (sorted) - faster! - extendable (additional variable properties can be added) - new, powerful features like "factory reset" or easy switching between several different environment settings ("profiles") Disadvantages: - Image size grows by typically 5...7 KiB (might shrink a bit again on systems with redundant environment with a following patch series) ====================================================================== Implemented: - env command with subcommands: - env print [arg ...] same as "printenv": print environment - env set [-f] name [arg ...] same as "setenv": set (and delete) environment variables ["-f" - force setting even for read-only variables - not implemented yet.] - end delete [-f] name not implemented yet ["-f" - force delete even for read-only variables] - env save same as "saveenv": save environment - env export [-t | -b | -c] addr [size] export internal representation (hash table) in formats usable for persistent storage or processing: -t: export as text format; if size is given, data will be padded with '\0' bytes; if not, one terminating '\0' will be added (which is included in the "filesize" setting so you can for exmple copy this to flash and keep the termination). -b: export as binary format (name=value pairs separated by '\0', list end marked by double "\0\0") -c: export as checksum protected environment format as used for example by "saveenv" command addr: memory address where environment gets stored size: size of output buffer With "-c" and size is NOT given, then the export command will format the data as currently used for the persistent storage, i. e. it will use CONFIG_ENV_SECT_SIZE as output block size and prepend a valid CRC32 checksum and, in case of resundant environment, a "current" redundancy flag. If size is given, this value will be used instead of CONFIG_ENV_SECT_SIZE; again, CRC32 checksum and redundancy flag will be inserted. With "-b" and "-t", always only the real data (including a terminating '\0' byte) will be written; here the optional size argument will be used to make sure not to overflow the user provided buffer; the command will abort if the size is not sufficient. Any remainign space will be '\0' padded. On successful return, the variable "filesize" will be set. Note that filesize includes the trailing/terminating '\0' byte(s). Usage szenario: create a text snapshot/backup of the current settings: => env export -t 100000 => era ${backup_addr} +${filesize} => cp.b 100000 ${backup_addr} ${filesize} Re-import this snapshot, deleting all other settings: => env import -d -t ${backup_addr} - env import [-d] [-t | -b | -c] addr [size] import external format (text or binary) into hash table, optionally deleting existing values: -d: delete existing environment before importing; otherwise overwrite / append to existion definitions -t: assume text format; either "size" must be given or the text data must be '\0' terminated -b: assume binary format ('\0' separated, "\0\0" terminated) -c: assume checksum protected environment format addr: memory address to read from size: length of input data; if missing, proper '\0' termination is mandatory - env default -f reset default environment: drop all environment settings and load default environment - env ask name [message] [size] same as "askenv": ask for environment variable - env edit name same as "editenv": edit environment variable - env run same as "run": run commands in an environment variable ====================================================================== TODO: - drop default env as implemented now; provide a text file based initialization instead (eventually using several text files to incrementally build it from common blocks) and a tool to convert it into a binary blob / object file. - It would be nice if we could add wildcard support for environment variables; this is needed for variable name auto-completion, but it would also be nice to be able to say "printenv ip*" or "printenv *addr*" - Some boards don't link any more due to the grown code size: DU405, canyonlands, sequoia, socrates. => cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>, Stefan Roese <sr@denx.de>, Heiko Schocher <hs@denx.de> - Dropping forceenv() causes build problems on schmoogie => cc: Sergey Kubushyn <ksi@koi8.net> - Build tested on PPC and ARM only; runtime tested with NOR and NAND flash only => needs testing!! Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>, Cc: Stefan Roese <sr@denx.de>, Cc: Heiko Schocher <hs@denx.de> Cc: Sergey Kubushyn <ksi@koi8.net>
* Make getenv() work before relocation.Wolfgang Denk2010-09-19-39/+51
| | | | | | | | | | | | | | | | | | | So far, getenv() would work before relocation is most cases, even though it was not intended to be used that way. When switching to a hash table based implementation, this would break a number of boards. For convenience, we make getenv() check if it's running before relocation and, if so, use getenv_f() internally. Note that this is limited to simple cases, as we use a small static buffer (32 bytes) in the global data for this purpose. For this reason, it is also not a good idea to convert all current uses of getenv_f() into getenv() - some of the existing use cases need to be able to deal with longer variable values, so getenv_f() is still needed and recommended for use before relocation. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Remove support for CONFIG_HAS_UID and "forceenv" commandWolfgang Denk2010-09-19-25/+0
| | | | | | | | | | | | This (undocumented) concept was only in use for the MVSMR and davinci_schmoogie Sergey Kubushyn <ksi@koi8.net> boards. Drop it for now. If really needed, it should be reimplemented later in the context of the new environment command set. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Andre Schwarz <andre.schwarz@matrix-vision.de> Cc: Sergey Kubushyn <ksi@koi8.net> Acked-by: Sergey Kubushyn <ksi@koi8.net>
generated by cgit v1.1 at 2024-12-21 13:54:57 +0000