summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* Marvell GuruPlug Board SupportSiddarth Gore2010-04-30-0/+652
| | | | | | | | | | | | | | GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com>
* Moved board specific values in config fileStefano Babic2010-04-30-1/+7
| | | | | | | | The lowlevel_init file contained some hard-coded values to setup the RAM. These board related values are moved into the board configuration file. Signed-off-by: Stefano Babic <sbabic@denx.de>
* MX51EVK: Remove CPLD related codeFabio Estevam2010-04-30-68/+0
| | | | | | There is no CPLD on MX51EVK board, so remove CPLD related function. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* arm, i.mx27: add support for magnesium board from projectiondesignHeiko Schocher2010-04-30-197/+335
| | | | | | | | | | | This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher <hs@denx.de>
* arm, mx27: add support for SDHC1 pin initHeiko Schocher2010-04-30-0/+18
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* SAMSUNG: make s5p common gpio functionsMinkyu Kang2010-04-30-105/+105
| | | | | | | | Because of s5pc1xx gpio is same as s5p seires SoC, move gpio functions to drvier/gpio/ and modify structure's name from s5pc1xx_ to s5p_. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* SAMSUNG: serial: modify name from s5pc1xx to s5pMinkyu Kang2010-04-30-29/+29
| | | | | | | Because of other s5p series SoC will use these serial functions, modify function's name and structure's name. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* pm9263: remove CONFIG_CMD_AUTOSCRIPTAsen Dimov2010-04-30-1/+0
| | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
* at91: add defines for RTT and GPBRAlexander Holler2010-04-30-0/+7
| | | | Signed-off-by: Alexander Holler <holler@ahsoftware.de>
* pm9261: remove CONFIG_CMD_AUTOSCRIPTAsen Dimov2010-04-30-1/+0
| | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
* pm9261 converted to at91 soc accessAsen Dimov2010-04-30-108/+130
| | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
* ARM Update mach-typestrix2010-04-30-12/+974
| | | | | | | | | | Fetched from http://www.arm.linux.org.uk/developer/machines/download.php And built with repo http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm commit 85b3cce880a19e78286570d5fd004cc3cac06f57 Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2010-04-28-0/+28
|\
| * MX31: Added LCD support for QONG moduleStefano Babic2010-04-27-0/+28
| | | | | | | | | | | | | | Added support for LCD and splash image to the QONG module. The supported display is VBEST-VGG322403. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2010-04-28-35/+67
|\ \ | |/ |/|
| * mpc83xx: turn on icache in core initialization to improve u-boot boot timeKim Phillips2010-04-22-26/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | before, MPC8349ITX boots u-boot in 4.3sec: column1 is elapsed time since first message column2 is elapsed time since previous message column3 is the message 0.000 0.000: U-Boot 2010.03-00126-gfd4e49c (Apr 11 2010 - 17:25:29) MPC83XX 0.000 0.000: 0.000 0.000: Reset Status: 0.000 0.000: 0.032 0.032: CPU: e300c1, MPC8349E, Rev: 1.1 at 533.333 MHz, CSB: 266.667 MHz 0.032 0.000: Board: Freescale MPC8349E-mITX 0.032 0.000: UPMA: Configured for compact flash 0.032 0.000: I2C: ready 0.061 0.028: DRAM: 256 MB (DDR1, 64-bit, ECC off, 266.667 MHz) 1.516 1.456: FLASH: 16 MB 2.641 1.125: PCI: Bus Dev VenId DevId Class Int 2.652 0.011: 00 10 1095 3114 0180 00 2.652 0.000: PCI: Bus Dev VenId DevId Class Int 2.652 0.000: In: serial 2.652 0.000: Out: serial 2.652 0.000: Err: serial 2.682 0.030: Board revision: 1.0 (PCF8475A) 3.080 0.398: Net: TSEC1: No support for PHY id ffffffff; assuming generic 3.080 0.000: TSEC0, TSEC1 4.300 1.219: IDE: Bus 0: .** Timeout ** after, MPC8349ITX boots u-boot in 3.0sec: 0.010 0.010: U-Boot 2010.03-00127-g4b468cc-dirty (Apr 11 2010 - 17:47:29) MPC83XX 0.010 0.000: 0.010 0.000: Reset Status: 0.010 0.000: 0.017 0.007: CPU: e300c1, MPC8349E, Rev: 1.1 at 533.333 MHz, CSB: 266.667 MHz 0.017 0.000: Board: Freescale MPC8349E-mITX 0.038 0.020: UPMA: Configured for compact flash 0.038 0.000: I2C: ready 0.038 0.000: DRAM: 256 MB (DDR1, 64-bit, ECC off, 266.667 MHz) 0.260 0.222: FLASH: 16 MB 1.390 1.130: PCI: Bus Dev VenId DevId Class Int 1.390 0.000: 00 10 1095 3114 0180 00 1.390 0.000: PCI: Bus Dev VenId DevId Class Int 1.400 0.010: In: serial 1.400 0.000: Out: serial 1.400 0.000: Err: serial 1.400 0.000: Board revision: 1.0 (PCF8475A) 1.832 0.432: Net: TSEC1: No support for PHY id ffffffff; assuming generic 1.832 0.000: TSEC0, TSEC1 3.038 1.205: IDE: Bus 0: .** Timeout ** also tested on these boards (albeit with a less accurate boottime measurement method): seconds: before after 8349MDS ~2.6 ~2.2 8360MDS ~2.8 ~2.6 8313RDB ~2.5 ~2.3 #nand boot 837xRDB ~3.1 ~2.3 also tested on an 8323ERDB. v2: also remove the delayed icache enablement assumption in arch ppc's board.c, and add a CONFIG_MPC83xx define in the ITX config file for consistency (even though it was already being defined in 83xx' config.mk). Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: enable command line autocompletionKim Phillips2010-04-22-3/+17
| | | | | | | | | | | | because it's convenient. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: use "A" nomenclature only on mpc834x and mpc836x familiesKim Phillips2010-04-22-1/+3
| | | | | | | | | | | | | | | | | | marketing didn't extend their postpend-with-an-A naming strategy on rev.2's and higher beyond the first two 83xx families. This patch stops us from misreporting we're running e.g., on an MPC8313EA, when such a name doesn't exist. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Use CONFIG_FSL_ESDHC to enable sdhc clkRini van Zetten2010-04-22-5/+5
| | | | | | | | | | | | | | | | | | | | | | Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a platform define. This will enable all the 83xx platforms to use sdhc_clk based on CONFIG_FSL_ESDHC. It's the same patch as commit 6b9ea08c5010eab5ad1056bc9bf033afb672d9cc for the ppc/85xx. Signed-off-by: Rini <rini@arvoo.nl> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk2010-04-27-93/+1911
|\ \
| * | mpc5121: pdm360ng: add coprocessor POSTAnatolij Gustschin2010-04-24-0/+145
| | | | | | | | | | | | | | | | | | Adds coprocessor communication POST code Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: add common post_word_load/store codeAnatolij Gustschin2010-04-24-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | Add common post_word_load/post_word_store routines for all mpc5121 boards. pdm360ng board POST support added by subsequent patch needs them. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: add support for PDM360NG boardAnatolij Gustschin2010-04-24-6/+1307
| | | | | | | | | | | | | | | | | | | | | | | | PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: determine RAM size using get_ram_size()Anatolij Gustschin2010-04-24-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | Configure CONFIG_SYS_MAX_RAM_SIZE address range in DDR Local Access Window and determine the RAM size. Fix DDR LAW afterwards using detected RAM size. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc512x: make MEM IO Control configuration a board config optionAnatolij Gustschin2010-04-24-5/+7
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: add PSC serial communication routinesAnatolij Gustschin2010-04-24-0/+94
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc512x: add multi serial PSC supportAnatolij Gustschin2010-04-24-81/+323
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend mpc512x serial driver to support multiple PSC ports. Subsequent patches for PDM360NG board support make use of this functionality by defining CONFIG_SERIAL_MULTI in the board config file. Additionally the used PSC devices are specified by defining e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6. Support for PSC devices other than 1, 3, 4 and 6 is not added by this patch because these aren't used currently. In the future it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c. Additionally you have to add code for registering added devices in serial_initialize() in common/serial.c. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-04-27-62/+201
|\ \ \
| * | | ppc: Split MPC83xx SERDES code from MPC85xx/MPC86xx/QorIQKumar Gala2010-04-26-4/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC83xx SERDES control is different from the other FSL PPC chips. For now lets split it out so we can standardize on interfaces for determining of a device on SERDES is configured. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com>
| * | | mpc85xx: Add the ability to set LCRR[CLKDIV] to improve R/W speed of flashLan Chunhe2010-04-26-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Lan Chunhe <b25806@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 85xx: clean up the io_sel for PCI express of P1022Dave Liu2010-04-26-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | clean up the wrong io_sel for PCI express according to latest manual. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 85xx/socrates: Remove NFS support to fit image size.Detlev Zundel2010-04-26-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes an overflow during the link phase. Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 85xx: Fix compile warningKumar Gala2010-04-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | cpu.c: In function 'checkcpu': cpu.c:47: warning: unused variable 'gur' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | 85xx: Convert cpu_init_f code to use out_be32 for LBC registersKumar Gala2010-04-26-18/+18
| | | | | | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | fsl_sata: Move the snoop bit to another placeDave Liu2010-04-26-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For P1022 SATA host controller, the data snoop bit of DW3 in PRDT is moved to bit28. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | fsl_sata: Add the workaround for errata SATA-A001Dave Liu2010-04-26-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After power on, the SATA host controller of P1022 Rev1 is configured in legacy mode instead of the expected enterprise mode. Software needs to clear bit[28] of HControl register to change to enterprise mode after bringing the host offline. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | fsl-ddr: Add extra cycle to turnaround timesDave Liu2010-04-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an extra cycle turnaround time to read->write to ensure stability at high DDR frequencies. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | fsl-ddr: add the macro for Rtt_Nom definitionDave Liu2010-04-26-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | add the macro definition for Rtt_Nom termination value for DDR3 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | ppc/p4080: Add p4080 DEVDISR2 & SRDS_PLLCR0 definesKumar Gala2010-04-26-2/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added some needed fines and some misc additional defines used by p4080 initialization. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | ppc/p4080: Extend the GUTS memory mapDave Liu2010-04-26-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend pin control and clock control to GUTS memory map Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | ppc/p4080: Fix synchronous frequency calculationsSrikanth Srinivasan2010-04-26-21/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When DDR is in synchronous mode, the existing code assigns sysclk frequency to DDR frequency. It should be synchronous with the platform frequency. CPU frequency is based on platform frequency in synchronous mode. Also fix: * Fixes the bit mask for DDR_SYNC (RCWSR5[184]) * Corrects the detection of synchronous mode. Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | ppc/85xx: Fixup PCI nodes for P1_P2_RDBKumar Gala2010-04-26-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While we had ft_pci_board_setup it wasn't being called by ft_board_setup. Fix that so we actually update the device tree PCI nodes on P1_P2_RDB boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Merge branch 'next' of git://git.denx.de/u-boot-niosWolfgang Denk2010-04-27-8/+640
|\ \ \ \ | |_|/ / |/| | |
| * | | nios2: add nios2-generic boardThomas Chou2010-04-24-0/+545
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a generic approach to port u-boot for nios2 boards. You may find the usage of this approach on the nioswiki, http://nioswiki.com/DasUBoot A fpga parameter file, which contains base address information and drivers declaration, is generated from Altera's hardware system description sopc file using tools. The example fpga parameter file is compatible with EP1C20, EP1S10 and EP1S40 boards. So these boards can be removed after this commit. Though epcs controller is removed to cut the dependency of altera_spi driver. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | | nios2: fix no flash, add nand and mmc init in board.cThomas Chou2010-04-24-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes error when CONFIG_SYS_NO_FLASH. And adds nand flash and mmc initialization, which should go before env initialization. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | | nios2: consolidate reset initializationThomas Chou2010-04-24-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Global interrupt should be disabled from the beginning. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | | altera_jtag_uart: bypass when no jtag connectionThomas Chou2010-04-24-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds an option to bypass output waiting when there is no jtag connection. This allows the jtag uart work similar to a serial uart, ie, boot even without connection. This option is enabled with CONFIG_ALTERA_JTAG_UART_BYPASS Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | | nios2: add dma_alloc_coherentThomas Chou2010-04-24-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This function return cache-line aligned allocation which is mapped to uncached io region. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | | nios2: add 64 bits swab supportThomas Chou2010-04-24-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds 64 bits swab support. Most 32 bits processors use this. We need 64 bits swab for UBI. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
| * | | nios2: add altera cf resetThomas Chou2010-04-24-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch toggles power to reset the cf card. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Scott McNutt <smcnutt@psyent.com>
generated by cgit v1.1 at 2024-12-22 12:31:22 +0000