summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* PPC4xx (Sequoia): Fix Ethernet "remote fault" problemsMike Nuss2008-03-04-3/+2
| | | | | | | | | | | | | | Every now and then a Sequoia board (or equivalent hardware) had problems connecting to a Gigabit capable network interface. There were differences in the PHY setup between Linux and U-Boot. This patch fixes the problem. Apparently "remote fault" is being set, which signals to some devices (on the other end of the cable) that a fault has occurred, while other devices ignore it. I believe the RF bit was causing the issue, but I removed T4 also, to match up with Linux. Signed-off-by: Mike Nuss <mike@terascala.com>
* fix QE firmware uploading limitTimur Tabi2008-03-03-1/+1
| | | | | | | Fix a typo in qe_upload_firmware() that prevented uploading firmware on systems with more than one RISC core. Signed-off-by: Timur Tabi <timur@freescale.com>
* Fix endianess problem in cramfs code (cramfs is always host-endian in Linux)Bernhard Nemec2008-03-03-22/+0
| | | | | | | Originally pointed out by Laurent Pinchart <laurent.pinchart@tbox.biz>, see http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/22846 Signed-off-by: Bernhard Nemec <bnemec <at> ganssloser.com>
* fix copy from ram to dataflashKim B. Heino2008-03-03-1/+1
| | | | | | | | If I try to "cp.b <ram> <dataflash>", u-boot selects normal flash routines instead of dataflash. This is because it checks "if source address is not dataflash" instead of target address. Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
* Fix quoting problem (preboot setting) in many board config files.Wolfgang Denk2008-03-03-96/+95
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ADS5121: Fix default environment.Wolfgang Denk2008-03-03-7/+8
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Makefile: Fix missing unconfig and mkconfig useJean-Christophe PLAGNIOL-VILLARD2008-03-03-10/+10
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Fix checking fat32 cluster size.michael2008-03-03-5/+6
| | | | | | | | | This fixes the cluster size tests in the FAT32 file system. The current implementation of VFAT support doesn't work if the referred cluster has an offset > 16bit representation, causing "fatload" and "fatls" commands etc. to fail. Signed-off-by: michael trimarchi <trimarchi@gandalf.sssup.it>
* Prepare v1.3.2-rc2 release candidateWolfgang Denk2008-03-02-1/+48
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc4xx: EMAC: Fix 405EZ fifo size setup in EMAC_MR1Stefan Roese2008-03-02-8/+24
| | | | | | | | | The 405EZ only supports 512 bytes of rx-/tx-fifo EMAC sizes. But currently 4k/2k is configured. This patch fixes this issue. Thanks to Thomas Kindler <tkindler@lenord.de> for pointing this out. Signed-off-by: Stefan Roese <sr@denx.de>
* Fix alignment error on ARM for modulesWoodruff, Richard2008-03-02-2/+6
| | | | | | | | Fix alignment fault on ARM when running modules. With out an explicit linker file gcc4.2.1 will half word align __bss_start's value. The word dereference will crash hello_world. signed-off-by Richard Woodruff <r-woodruff2@ti.com>
* fs: Fix ext2 read issueDave Liu2008-03-02-0/+16
| | | | | | | The ext2 aligned process will corrupt the key data struct, the patch fix this. Signed-off-by: Dave Liu <daveliu@freescale.com>
* Makefile: cleanup "clean" targetWolfgang Denk2008-03-02-26/+330
| | | | | | | Make sure CDPATH settings cannot interfere. Update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
* add cscope build targetLi Yang2008-03-02-2/+7
| | | | | | Add cscope build target to generate cscope database for code browsing. Signed-off-by: Li Yang <leoli@freescale.com>
* net: uec_phy: handle 88e1111 rev.B2 erratum 5.6Kim Phillips2008-03-02-0/+8
| | | | | | | | | | erratum 5.6 states the autoneg completion bit is functional only if the autoneg bit is asserted. This fixes any secondarily-issued networking commands on non-gigabit links on the mpc8360 mds board. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2008-03-02-9/+19
|\
| * 85xx: Don't icbi when unlocking the cacheKumar Gala2008-02-27-5/+2
| | | | | | | | | | | | | | | | | | There is no reason to icbi when invalidating the temporary stack in the d-cache. Its impossible on e500 to have the i-cache contain any addresses in the temp stack and it can be problematic in generating transactions on the bus to non-valid addresses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * Fix source for ECM error IVPRAndy Fleming2008-02-27-1/+1
| | | | | | | | | | | | | | | | The source vector for the ECM was being set to 2, but that's what the source vector for DDR was being set to. Change it to 1. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * Invalidate INIT_RAM TLB mappingsAndy Fleming2008-02-27-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 0db37dc... (and some others) changed the INIT_RAM TLB mappings to be unguarded. This collided with an existing "bug" where the mappings for the INIT_RAM were being kept around. This meant that speculative loads to those addresses were succeeding in the TLB, and going out to the bus, where they were causing an exception (there's nothing at that address). The Flash code was coincidentally causing such a speculative load. Rather than go back to mapping the INIT RAM as guarded, we fix it so that the entries for the INIT_RAM are invalidated. Thus the speculative loads will fail in the TLB, and have no effect. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * sbc8548: Fix Revision reading and unused variable 'path'Jean-Christophe PLAGNIOL-VILLARD2008-02-27-2/+4
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * sbc8548: Fix cfi flash bank declarationJean-Christophe PLAGNIOL-VILLARD2008-02-27-1/+1
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | MPC5121e ADS PCI support take 3John Rigby2008-03-02-15/+411
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds PCI support for MPC5121 Tested with drivers/net/rtl8139.c Support is conditional since PCI on old silicon does not work. ads5121_PCI_config turns on PCI In this version, condition compilation of PCI code has been moved from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as suggested by Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: John Rigby <jrigby@freescale.com>
* | Fix warnings while compilation of post/drivers/memory.cAnatolij Gustschin2008-03-02-3/+3
| | | | | | | | | | | | Fix warnings while compilation with new gcc in eldk-4.2 Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xxWolfgang Denk2008-03-02-2/+4
|\ \
| * | 86xx: Fix renamed GUR symbols in sbc8641d board.Jon Loeliger2008-02-25-2/+4
| |/ | | | | | | | | | | | | | | | | Back in commit a551cee99ad1d1da20fd23ad265de47448852f56 (86xx: Fix GUR PCI config registers properly), we should have changed the MPC86xx_PORBMSR_HA and MPC86xx_PORDEVSR_IO_SEL symbols in the sbc8641d board as well. Fix this oversight. Signed-off-by: Jon Loeliger <jdl@freescale.com>
* | ppc4xx: Fix problem in 4xx_enet.c driverAnatolij Gustschin2008-03-02-1/+9
| | | | | | | | | | | | | | | | | | | | U-Boot crashes in the net loop if CONFIG_4xx_DCACHE is enabled. To reproduce the problem ensure that 'ethrotate' environment variable isn't set to "no" and then run "tftp 200000 not_existent_file". This patch tries to fix the issue. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | POST: Disable cache while SPR POSTAnatolij Gustschin2008-03-02-0/+14
| | | | | | | | | | | | | | | | Currently (since commit b2e2142c) u-boot crashes on sequoia board while SPR test if CONFIG_4xx_DCACHE is enabled. This patch disables the cache while SPR test. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | TQM5200: use automatic fdt memory fixup (part 2)Martin Krause2008-03-02-0/+4
| | | | | | | | | | | | | | | | Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, TB5200 and TB5200_B to fixup the /memory node with the memory values detected by U-Boot. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-03-02-0/+2
|\ \
| * | ppc4xx: Fix acadia_nand build problemStefan Roese2008-02-25-0/+2
| |/ | | | | | | | | | | | | Don't include testdram() on NAND-booting target acadia_nand. This saves a few bytes and makes the target build clean again. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-armWolfgang Denk2008-03-02-0/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | Conflicts: include/asm-arm/arch-imx/imx-regs.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | mx1fs2/flash: Fix multiple pointertargets in assignment differ in signednessJean-Christophe PLAGNIOL-VILLARD2008-02-25-1/+1
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | arm-imx: Fix registers definitionJean-Christophe PLAGNIOL-VILLARD2008-02-25-60/+117
| | | | | | | | | | | | | | | | | | Sync registers definition with linux Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | actua1/actua2/actua3: Fix multipleunused variableJean-Christophe PLAGNIOL-VILLARD2008-02-25-5/+5
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - actua1: actux1.c: In function 'checkboard': actux1.c:92: warning: unused variable 'revision' - actua2: actux2.c: In function 'checkboard': actux2.c:100: warning: unused variable 's' actux2.c:99: warning: unused variable 'revision' actux2.c: In function 'reset_phy': actux2.c:130: warning: unused variable 'i' - actua3: actux3.c: In function 'checkboard': actux3.c:114: warning: unused variable 'revision' Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | TQM5200: use automatic fdt memory fixupMartin Krause2008-03-02-0/+1
| | | | | | | | | | | | | | | | Call fdt_fixup_memory() on the boards TQM5200, TQM5200_B, TQM5200S, TB5200 and TB5200_B to fixup the /memory node with the memory values detected by U-Boot. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | TQM5200: fix bug in SDRAM initialization codeMartin Krause2008-03-02-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug in the SDRAM initialization code for the TQM5200. The hi_addr bit is now set correctly. Without this patch the hi_addr bit is always set to 1, if the second SDRAM bank is not populated. For other MPC5200 boards a correspondig patch has already been applied some time ago, see commit a63109281ad41b0fb489fdcb901171f76bcdbc2c. Signed-off-by: Martin Krause <martin.krause@tqs.de> -- Forget the first patch please. I confused flash with SDRAM in the comment ...
* | mx1fs2/flash: Fix multiple compiler warningsJean-Christophe PLAGNIOL-VILLARD2008-03-02-1/+1
| | | | | | | | | | | | "pointer targets in assignment differ in signedness" Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | arm-imx: Fix register definitionsJean-Christophe PLAGNIOL-VILLARD2008-03-02-61/+118
| | | | | | | | | | | | Sync register definitions with linux Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | actua1/actua2/actua3: Fix multiple unused variable warningsJean-Christophe PLAGNIOL-VILLARD2008-03-02-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - actua1: actux1.c: In function 'checkboard': actux1.c:92: warning: unused variable 'revision' - actua2: actux2.c: In function 'checkboard': actux2.c:100: warning: unused variable 's' actux2.c:99: warning: unused variable 'revision' actux2.c: In function 'reset_phy': actux2.c:130: warning: unused variable 'i' - actua3: actux3.c: In function 'checkboard': actux3.c:114: warning: unused variable 'revision' Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit ↵Shinya Kuribayashi2008-03-02-12/+12
|/ | | | | | | | | targets. The previous patch was lacking of i386, microblaze, nios and nios2. This patch tries to fix them. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* Coding style cleanup. Prepare v1.3.2-rc2 release candidateWolfgang Denk2008-02-24-12/+480
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* ENV: remove saveenv when CFG_ENV_IS_NOWHERE is selectedJean-Christophe PLAGNIOL-VILLARD2008-02-23-4/+6
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit ↵Shinya Kuribayashi2008-02-23-21/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | targets. ---------------------------------------------------------------- Olaf Hering [Wed, 17 Oct 2007 06:27:13 +0000 (23:27 -0700)] Remove the __STRICT_ANSI__ check from the __u64/__s64 declaration on 32bit targets. GCC can be made to warn about usage of long long types with ISO C90 (-ansi), but only with -pedantic. You can write this in a way that even then it doesn't cause warnings, namely by: #ifdef __GNUC__ __extension__ typedef __signed__ long long __s64; __extension__ typedef unsigned long long __u64; #endif The __extension__ keyword in front of this switches off any pedantic warnings for this expression. Signed-off-by: Olaf Hering <olh@suse.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> ---------------------------------------------------------------- Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* cpu/mcf52x2/config.mk: Make needlessly deffered expansions immediate.Shinya Kuribayashi2008-02-23-5/+5
| | | | | | This will reduce the build time. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.Shinya Kuribayashi2008-02-23-1/+1
| | | | | | This will reduce the build time. Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* cpu/mips/cofigl.mk: Make a needlessly deffered expansion immediate.Shinya Kuribayashi2008-02-23-1/+1
| | | | | | | | | | | This reduces the build time by ~10%. Here's the gth2_config example. BEFORE AFTER real 0m31.441s 0m27.833s user 0m24.766s 0m23.045s sys 0m10.425s 0m7.468s Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
* make define2mk.sed work on FreeBSDMarcel Moolenaar2008-02-22-2/+2
| | | | | | | | | | In the thread "[1.3.2-rc1] MPC8548CDS/MPC8555CDS configs fails to link", the define2mk.sed script was identified as the source of the link failure on FreeBSD. The problem is that sed(1) does not always support the '+' operator. It isn't on FreeBSD. The attach patch implements the equivalent, using the '*' operator instead and should work everywhere. Signed-off-by: Marcel Moolenaar <marcelm@juniper.net>
* Replace deprecated "ramdisk" with "ramdisk_size" kernel parameter.Detlev Zundel2008-02-22-4/+4
| | | | | | | | The Linux commit fac8b209b1084bc85748bd54e13d00c1262b220f ("Remove final traces of long-deprecated "ramdisk" kernel parm") makes these changes neccessary. Signed-off-by: Detlev Zundel <dzu@denx.de>
* LM75 bug fix for negative temperaturesLarry Johnson2008-02-22-1/+7
| | | | | | | | When the LM75 temperature sensor measures a temperature below 0 C, the current driver does not perform sign extension, so the result returned is 256 C too high. This patch fixes the problem. Signed-off-by: Larry Johnson <lrj@acm.org>
* IDS8247: update MAINTAINER entry.Heiko Schocher2008-02-22-1/+1
| | | | Signed-off-by: Heiko Schocher <hs@denx.de>
generated by cgit v1.1 at 2024-12-19 19:50:36 +0000